Viktor Shin
/
WIZnet-IoTShield-AMM592-GPS
WIZnet-IoTShield-AMM592-GPS for AMM592
Revision 1:72811bd893df, committed 2019-09-25
- Comitter:
- vikshin
- Date:
- Wed Sep 25 05:29:51 2019 +0000
- Parent:
- 0:98226e0983af
- Commit message:
- Initial Release;
Changed in this revision
main.cpp | Show annotated file Show diff for this revision Revisions of this file |
diff -r 98226e0983af -r 72811bd893df main.cpp --- a/main.cpp Wed Mar 20 05:33:37 2019 +0000 +++ b/main.cpp Wed Sep 25 05:29:51 2019 +0000 @@ -32,21 +32,21 @@ #define MAX_BUF_SIZE 1024 -#define BG96_APN_PROTOCOL_IPv4 1 -#define BG96_APN_PROTOCOL_IPv6 2 -#define BG96_DEFAULT_TIMEOUT 1000 -#define BG96_CONNECT_TIMEOUT 15000 -#define BG96_SEND_TIMEOUT 500 -#define BG96_RECV_TIMEOUT 500 +#define AMM592_APN_PROTOCOL_IPv4 1 +#define AMM592_APN_PROTOCOL_IPv6 2 +#define AMM592_DEFAULT_TIMEOUT 1000 +#define AMM592_CONNECT_TIMEOUT 15000 +#define AMM592_SEND_TIMEOUT 500 +#define AMM592_RECV_TIMEOUT 500 -#define BG96_APN_PROTOCOL BG96_APN_PROTOCOL_IPv6 -#define BG96_DEFAULT_BAUD_RATE 115200 -#define BG96_PARSER_DELIMITER "\r\n" +#define AMM592_APN_PROTOCOL AMM592_APN_PROTOCOL_IPv6 +#define AMM592_DEFAULT_BAUD_RATE 115200 +#define AMM592_PARSER_DELIMITER "\r\n" #define CATM1_APN_SKT "lte-internet.sktelecom.com" -#define CATM1_DEVICE_NAME_BG96 "BG96" -#define DEVNAME CATM1_DEVICE_NAME_BG96 +#define CATM1_DEVICE_NAME_AMM592 "AMM592" +#define DEVNAME CATM1_DEVICE_NAME_AMM592 #define devlog(f_, ...) if(CATM1_DEVICE_DEBUG == DEBUG_ENABLE) { pc.printf("\r\n[%s] ", DEVNAME); pc.printf((f_), ##__VA_ARGS__); } #define myprintf(f_, ...) {pc.printf("\r\n[MAIN] "); pc.printf((f_), ##__VA_ARGS__);} @@ -63,37 +63,29 @@ #define MBED_CONF_IOTSHIELD_SENSOR_TEMP A1 /* Debug message settings */ -#define BG96_PARSER_DEBUG DEBUG_DISABLE +#define AMM592_PARSER_DEBUG DEBUG_DISABLE #define CATM1_DEVICE_DEBUG DEBUG_ENABLE typedef struct gps_data_t { - float utc; // hhmmss.sss float lat; // latitude. (-)dd.ddddd float lon; // longitude. (-)dd.ddddd - float hdop; // Horizontal precision: 0.5-99.9 - float altitude; // altitude of antenna from sea level (meters) - int fix; // GNSS position mode 2=2D, 3=3D - float cog; // Course Over Ground ddd.mm - float spkm; // Speed over ground (Km/h) xxxx.x - float spkn; // Speed over ground (knots) xxxx.x - char date[7]; // data: ddmmyy - int nsat; // number of satellites 0-12 } gps_data; // Functions: Module Status void waitCatM1Ready(void); -int8_t setEchoStatus_BG96(bool onoff); -int8_t getUsimStatus_BG96(void); -int8_t getNetworkStatus_BG96(void); -int8_t checknSetApn_BG96(const char * apn); -int8_t getFirmwareVersion_BG96(char * version); -int8_t getImeiNumber_BG96(char * imei); +int8_t setEchoStatus_AMM592(int onoff); +int8_t getUsimStatus_AMM592(void); +int8_t getNetworkStatus_AMM592(void); +int8_t checknSetApn_AMM592(const char * apn); +int8_t getFirmwareVersion_AMM592(char * version); +int8_t getImeiNumber_AMM592(char * imei); // Functions: GPS -int8_t setGpsOnOff_BG96(bool onoff); -int8_t getGpsLocation_BG96(gps_data *data); +int8_t setGpsSesssion_AMM592(int session_type); +int8_t setGpsOnOff_AMM592(bool onoff); +int8_t getGpsLocation_AMM592(gps_data *data); Serial pc(USBTX, USBRX); // USB debug @@ -101,8 +93,8 @@ UARTSerial *_serial; // Cat.M1 module ATCmdParser *_parser; -DigitalOut _RESET_BG96(MBED_CONF_IOTSHIELD_CATM1_RESET); -DigitalOut _PWRKEY_BG96(MBED_CONF_IOTSHIELD_CATM1_PWRKEY); +DigitalOut _RESET_AMM592(MBED_CONF_IOTSHIELD_CATM1_RESET); +DigitalOut _PWRKEY_AMM592(MBED_CONF_IOTSHIELD_CATM1_PWRKEY); void serialPcInit(void) { @@ -120,30 +112,30 @@ _parser = new ATCmdParser(_serial); _parser->debug_on(debug_en); _parser->set_delimiter(delimiter); - _parser->set_timeout(BG96_DEFAULT_TIMEOUT); + _parser->set_timeout(AMM592_DEFAULT_TIMEOUT); } void catm1DeviceInit(void) { serialDeviceInit( MBED_CONF_IOTSHIELD_CATM1_TX, MBED_CONF_IOTSHIELD_CATM1_RX, - BG96_DEFAULT_BAUD_RATE); + AMM592_DEFAULT_BAUD_RATE); - serialAtParserInit( BG96_PARSER_DELIMITER, - BG96_PARSER_DEBUG); + serialAtParserInit( AMM592_PARSER_DELIMITER, + AMM592_PARSER_DEBUG); } -void catm1DeviceReset_BG96(void) +void catm1DeviceReset_AMM592(void) { - _RESET_BG96 = 1; - _PWRKEY_BG96 = 1; + _RESET_AMM592 = 1; + _PWRKEY_AMM592 = 1; wait_ms(300); - _RESET_BG96 = 0; - _PWRKEY_BG96 = 0; + _RESET_AMM592 = 0; + _PWRKEY_AMM592 = 0; wait_ms(400); - _RESET_BG96 = 1; + _RESET_AMM592 = 1; wait_ms(1000); } @@ -159,7 +151,7 @@ myprintf("Waiting for Cat.M1 Module Ready...\r\n"); - catm1DeviceReset_BG96(); + catm1DeviceReset_AMM592(); waitCatM1Ready(); @@ -170,52 +162,50 @@ myprintf("WIZnet IoT Shield for Arm MBED"); myprintf("LTE Cat.M1 Version"); myprintf("================================================="); - myprintf(">> Target Board: WIoT-QC01 (Quectel BG96)"); + myprintf(">> Target Board: WIoT-AM01 (AM Telecom AMM592)"); myprintf(">> Sample Code: GPS"); myprintf("=================================================\r\n"); - setEchoStatus_BG96(OFF); + setEchoStatus_AMM592(0); - getUsimStatus_BG96(); + getUsimStatus_AMM592(); - getNetworkStatus_BG96(); + getNetworkStatus_AMM592(); - checknSetApn_BG96(CATM1_APN_SKT); + checknSetApn_AMM592(CATM1_APN_SKT); // GPS information structure gps_data gps_info; - if(setGpsOnOff_BG96(ON) == RET_OK) { - myprintf("GPS On\r\n") - while(1) { - if(getGpsLocation_BG96(&gps_info) == RET_OK) { + if(setGpsSesssion_AMM592(1) == RET_OK) { + myprintf("GPS Session setting success\r\n"); + + if(setGpsOnOff_AMM592(ON) == RET_OK) { + myprintf("GPS On\r\n"); + + if(getGpsLocation_AMM592(&gps_info) == RET_OK) { myprintf("Get GPS information >>>"); - myprintf("gps_info - utc: %6.3f", gps_info.utc) // utc: hhmmss.sss myprintf("gps_info - lat: %2.5f", gps_info.lat) // latitude: (-)dd.ddddd myprintf("gps_info - lon: %2.5f", gps_info.lon) // longitude: (-)dd.ddddd - myprintf("gps_info - hdop: %2.1f", gps_info.hdop) // Horizontal precision: 0.5-99.9 - myprintf("gps_info - altitude: %2.1f", gps_info.altitude) // altitude of antenna from sea level (meters) - myprintf("gps_info - fix: %d", gps_info.fix) // GNSS position mode: 2=2D, 3=3D - myprintf("gps_info - cog: %3.2f", gps_info.cog) // Course Over Ground: ddd.mm - myprintf("gps_info - spkm: %4.1f", gps_info.spkm) // Speed over ground (Km/h): xxxx.x - myprintf("gps_info - spkn: %4.1f", gps_info.spkn) // Speed over ground (knots): xxxx.x - myprintf("gps_info - date: %s", gps_info.date) // data: ddmmyy - myprintf("gps_info - nsat: %d\r\n", gps_info.nsat) // number of satellites: 0-12 } else { myprintf("Failed to get GPS information\r\n"); } wait_ms(1000); - } + #if 0 - if(setGpsOnOff_BG96(OFF) == RET_OK) { + if(setGpsOnOff_AMM592(OFF) == RET_OK) { myprintf("GPS Off\r\n") } #endif + } else { + myprintf("GPS On failed\r\n") + } } else { - myprintf("GPS On failed\r\n") + myprintf("GPS Session setting failed\r\n"); } + } // ---------------------------------------------------------------- @@ -226,20 +216,21 @@ { while(1) { - if(_parser->recv("RDY")) + if(_parser->recv("@NOTI:34,AMT_BOOT_ALERT") && _parser->recv("@NETSTI:3") ) { - myprintf("BG96 ready\r\n"); + myprintf("AM592 ready\r\n"); return ; } else if(_parser->send("AT") && _parser->recv("OK")) { - myprintf("BG96 already available\r\n"); + myprintf("AM592 already available\r\n"); + wait_ms(5000); return ; } - } + } } -int8_t setEchoStatus_BG96(bool onoff) +int8_t setEchoStatus_AMM592(int onoff) { int8_t ret = RET_NOK; char _buf[10]; @@ -255,7 +246,7 @@ return ret; } -int8_t getUsimStatus_BG96(void) +int8_t getUsimStatus_AMM592(void) { int8_t ret = RET_NOK; @@ -269,79 +260,55 @@ return ret; } -int8_t getNetworkStatus_BG96(void) +int8_t getNetworkStatus_AMM592(void) { int8_t ret = RET_NOK; + bool cereg = false, nsi = false; + int n, stat; + + if(_parser->send("AT+CEREG?") && _parser->recv("+CEREG: %d, %d", &n, &stat) && _parser->recv("OK")){ + if ((n==0 || n==1) && stat==1){ + cereg = true; + } + } - if(_parser->send("AT+QCDS") && _parser->recv("+QCDS: \"SRV\"") && _parser->recv("OK")) { + if(_parser->send("AT@NSI") && _parser->recv("@NSI:%d,\"IN SRV\"") && _parser->recv("OK")) { devlog("Network Status: attached\r\n"); - ret = RET_OK; - } else if (_parser->send("AT+QCDS") && _parser->recv("+QCDS: \"LIMITED\"") && _parser->recv("OK")) { + nsi = true; + } else if (_parser->send("AT@NSI") && _parser->recv("@NSI: \"LIMITED\"") && _parser->recv("OK")) { devlog("Network Status: limited\r\n"); - ret = RET_OK; + nsi = true; } else { devlog("Network Status: Error\r\n"); } + + if (cereg && nsi){ + ret = RET_OK; + } return ret; } -int8_t checknSetApn_BG96(const char * apn) // Configure Parameters of a TCP/IP Context +int8_t checknSetApn_AMM592(const char * apn) // Configure Parameters of a TCP/IP Context { - char resp_str[100]; - - uint16_t i = 0; - char * search_pt; - - memset(resp_str, 0, sizeof(resp_str)); + bool cgdccont = false, cgatt = false; + int8_t ret = RET_NOK; devlog("Checking APN...\r\n"); - - _parser->send("AT+QICSGP=1"); - - while(1) - { - _parser->read(&resp_str[i++], 1); - search_pt = strstr(resp_str, "OK\r\n"); - if (search_pt != 0) - { - break; - } + //APN setting + if (_parser->send("AT+CGDCONT=1,\"IPV4V6\",\"%s\"", apn) && _parser->recv("OK")){ + cgdccont = true; + } + //Attach setting + if (_parser->send("AT+CGATT?") && _parser->recv("+CGATT: 1") &&_parser->recv("OK")){ + cgatt = true; } - - search_pt = strstr(resp_str, apn); - if (search_pt == 0) - { - devlog("Mismatched APN: %s\r\n", resp_str); - devlog("Storing APN %s...\r\n", apn); - if(!(_parser->send("AT+QICSGP=1,%d,\"%s\",\"\",\"\",0", BG96_APN_PROTOCOL, apn) && _parser->recv("OK"))) - { - return RET_NOK; // failed - } - } - devlog("APN Check Done\r\n"); - - return RET_OK; -} -int8_t getFirmwareVersion_BG96(char * version) -{ - int8_t ret = RET_NOK; - - if(_parser->send("AT+QGMR") && _parser->recv("%s\n", version) && _parser->recv("OK")) - { + if (cgdccont && cgatt){ ret = RET_OK; - } - return ret; -} + } -int8_t getImeiNumber_BG96(char * imei) -{ - int8_t ret = RET_NOK; - - if(_parser->send("AT+CGSN") && _parser->recv("%s\n", imei) && _parser->recv("OK")) - { - ret = RET_OK; - } + devlog("APN Check Done\r\n"); + return ret; } @@ -349,54 +316,69 @@ // Functions: Cat.M1 GPS // ---------------------------------------------------------------- -int8_t setGpsOnOff_BG96(bool onoff) +int8_t setGpsSesssion_AMM592(int session_type) { int8_t ret = RET_NOK; - char _buf[15]; + - sprintf((char *)_buf, "%s", onoff ? "AT+QGPS=2" : "AT+QGPSEND"); - - if(_parser->send(_buf) && _parser->recv("OK")) { - devlog("GPS Power: %s\r\n", onoff ? "On" : "Off"); + if(_parser->send("AT@AMGST=%d", session_type) && _parser->recv("OK")) { ret = RET_OK; } else { - devlog("Set GPS Power %s failed\r\n", onoff ? "On" : "Off"); + devlog("Set GPS session failed"); + } + return ret; +} + +int8_t setGpsOnOff_AMM592(bool onoff) +{ + int8_t ret = RET_NOK; + if(onoff == ON){ + if(_parser->send("AT@AMGSTART") && _parser->recv("OK")) { + ret = RET_OK; + } else { + devlog("Set AMGSTART failed\r\n"); + } + } else { + if(_parser->send("AT@AMGSTOP") && _parser->recv("OK")) { + ret = RET_OK; + } else { + devlog("Set AMGSTOP failed\r\n"); + } } return ret; } -int8_t getGpsLocation_BG96(gps_data *data) +int8_t getGpsLocation_AMM592(gps_data *data) { int8_t ret = RET_NOK; - char _buf[100]; + int state_code=0; bool ok = false; Timer t; - + char _buf[100] = {0, }; + // Structure init: GPS info - data->utc = data->lat = data->lon = data->hdop= data->altitude = data->cog = data->spkm = data->spkn = data->nsat=0.0; - data->fix=0; - memset(&data->date, 0x00, 7); + data->lat = data->lon=0; + memset(&data->lat, 0x00, 7); // timer start t.start(); - while( !ok && (t.read_ms() < BG96_CONNECT_TIMEOUT ) ) { - _parser->flush(); - _parser->send((char*)"AT+QGPSLOC=2"); // MS-based mode - ok = _parser->recv("+QGPSLOC: "); - if(ok) { - _parser->recv("%s\r\n", _buf); - sscanf(_buf,"%f,%f,%f,%f,%f,%d,%f,%f,%f,%6s,%d", - &data->utc, &data->lat, &data->lon, &data->hdop, - &data->altitude, &data->fix, &data->cog, - &data->spkm, &data->spkn, data->date, &data->nsat); - ok = _parser->recv("OK"); - } + while( !ok && (t.read_ms() < 65000 ) ) { + if (_parser->recv("@AMG:%d,", &state_code)){ + if (state_code == 0) { + _parser->read(_buf, sizeof(_buf)); + sscanf(_buf, "%f, %f", &data->lat, &data->lon); + ok = true; + } + else { + _parser->read(_buf, sizeof(_buf)); + devlog("Error: %s", _buf); + } } if(ok == true) ret = RET_OK; - + t.reset(); return ret; }