Denislam Valeev / Mbed OS Nucleo_rtos_basic
Embed: (wiki syntax)

« Back to documentation index

Show/hide line numbers ThreadInterface.h Source File

ThreadInterface.h

00001 /*
00002  * Copyright (c) 2015 ARM Limited. All rights reserved.
00003  * SPDX-License-Identifier: Apache-2.0
00004  * Licensed under the Apache License, Version 2.0 (the License); you may
00005  * not use this file except in compliance with the License.
00006  * You may obtain a copy of the License at
00007  *
00008  * http://www.apache.org/licenses/LICENSE-2.0
00009  *
00010  * Unless required by applicable law or agreed to in writing, software
00011  * distributed under the License is distributed on an AS IS BASIS, WITHOUT
00012  * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
00013  * See the License for the specific language governing permissions and
00014  * limitations under the License.
00015  */
00016 
00017 #ifndef THREADINTERFACE_H
00018 #define THREADINTERFACE_H
00019 
00020 #include "MeshInterfaceNanostack.h"
00021 
00022 class ThreadInterface : public MeshInterfaceNanostack {
00023 public:
00024 
00025     /** Create an uninitialized LoWPANNDInterface
00026      *
00027      *  Must initialize to initialize the mesh on a phy.
00028      */
00029     ThreadInterface() : MeshInterfaceNanostack() { }
00030 
00031     /** Create an initialized MeshInterface
00032      *
00033      */
00034     ThreadInterface(NanostackRfPhy *phy) : MeshInterfaceNanostack(phy) { }
00035 
00036     nsapi_error_t initialize(NanostackRfPhy *phy);
00037 
00038     /**
00039      * \brief Sets the eui64 for the device configuration.
00040      * By default this value is read from the radio driver.
00041      * The value must be set before calling the connect function.
00042      * */
00043     void device_eui64_set(const uint8_t *eui64);
00044 
00045     /**
00046      * \brief sets the PSKd for the device configuration.
00047      * The default value is overwritten, which is defined in the mbed_lib.json file in the mesh-api
00048      * The value must be set before calling the connect function.
00049      * \return MESH_ERROR_NONE on success.
00050      * \return MESH_ERROR_PARAM in case of illegal parameters.
00051      * \return MESH_ERROR_MEMORY in case of memory error.
00052      * */
00053 
00054     mesh_error_t device_pskd_set(const char *pskd);
00055 
00056     virtual int connect();
00057     virtual int disconnect();
00058 private:
00059     /*
00060      * \brief Initialization of the interface.
00061      * \return MESH_ERROR_NONE on success.
00062      * \return MESH_ERROR_PARAM when input parameters are illegal (also in case when RF device is already associated to other interface)
00063      * \return MESH_ERROR_MEMORY in case of memory error
00064      * \return MESH_ERROR_UNKNOWN in other error cases
00065      */
00066     mesh_error_t init();
00067     /**
00068      * \brief Connect interface to the mesh network
00069      * \return MESH_ERROR_NONE on success.
00070      * \return MESH_ERROR_PARAM in case of illegal parameters.
00071      * \return MESH_ERROR_MEMORY in case of memory error.
00072      * \return MESH_ERROR_STATE if interface is already connected to network.
00073      * \return MESH_ERROR_UNKNOWN in case of unspecified error.
00074      * */
00075     mesh_error_t mesh_connect();
00076 
00077     /**
00078      * \brief Disconnect interface from the mesh network
00079      * \return MESH_ERROR_NONE on success.
00080      * \return MESH_ERROR_UNKNOWN in case of error.
00081      * */
00082     mesh_error_t mesh_disconnect();
00083 
00084     /**
00085      * \brief Read own global IP address
00086      *
00087      * \param address is where the IP address will be copied
00088      * \param len is the length of the address buffer, must be at least 40 bytes
00089      * \return true if address is read successfully, false otherwise
00090      */
00091     virtual bool getOwnIpAddress(char *address, int8_t len);
00092 };
00093 
00094 #endif // THREADINTERFACE_H