Michael Ball
Thermistor to Temperature library, using Steinhart-Hart algorithm
Homepage
This is a Thermistor to Temperature conversion library
Much thanks to @Adafruit for this tutorial: https://learn.adafruit.com/thermistor/using-a-thermistor
The 100K Thermistor is configured with a 4.7k series resistor tied to vcc (3.3v) like this:
+3.3v
\ / 4.7k series resistor \ /
.---O To Anlog pin on FRDM board
\ / Thermistor 100k Nominal \ /
-
GND
author Michael J. Ball unix_guru at hotmail.com @unix_guru on Twitter March 2016