Diff: SnPreCompOptions.h

Revision:

84:80b15993944e

Child:

114:554fa3a956b4

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/SnPreCompOptions.h	Fri Oct 30 04:49:40 2015 +0000
@@ -0,0 +1,66 @@
+#ifndef SN_SnPreCompOptions
+#define SN_SnPreCompOptions
+
+// whether to send debugging output to the serial (usb) port
+// note that this is not typically included in cpp files, so it
+// may be necessary to enable more DEBUG defines in those files.
+// also, the comms and peripherals packages will have their own
+// separate debug switches too.
+//#define DEBUG
+
+// sorry for the double negative, but.. normally this is NOT DEFINED
+// uncommenting this will allow any values to be specified in a configuration
+// leaving it commented out is safer
+//#define DISABLE_CONFIG_SAFETYNETS
+
+// choose which communication peripherals will be used in the comms loop
+// for now, twitter is completely not working.
+#define ENABLE_AFAR_COMM
+#define ENABLE_SBD_COMM
+//#define ENABLE_USB_COMM
+//#define ENABLE_AFAR_TWITTER
+
+// use of the real time operating system has not been implemented
+// for some time -- enabling this will not work any more.
+// some development will be needed, including a RTOS aware networking package
+//#define USE_RTOS // change USE_RTOS in CommConstants and EthernetPower also
+
+// an outdated switch. currently only NetServicesMin is available.
+//#define USE_ETH_INTERFACE
+
+// turn this on to record how long it takes to take and save events
+//#define EVT_TIME_PROFILE
+
+// print the start and stop running messages on the seial (USB) port
+// even if other debugging messages are disabled.
+//#define SSNOTIFY
+
+// use MODSERIAL (a buffered serial interface) instead of the
+// "standard" serial (unbuffered) provided by mbed
+#define USE_MODSERIAL
+
+
+// available CHIPBOARDs -- these values should NEVER change!
+// this is just a definition of constants. CHIPBOARD is the
+// variable that must be set equal to one of these constants.
+#define ATWD4CH 0  // set CHIPBOARD to this to get firmware for the 2012-2013 stations (value is arbitrary but unique)
+#define SST4CH  1  // set CHIPBOARD to this to get firmware for the 2014 stations with a single SST chip (value is arbitrary but unique)
+
+// which chip/board combination to build this firmware for
+//#define CHIPBOARD ATWD4CH
+#define CHIPBOARD SST4CH
+
+// whether or not to use the flash memory on the mbed board, to call
+// the mbed provided function that gets the MAC address, etc.
+// these functions all use the mbed interface chip. it has been found
+// that once in while, functions accessing the interface chip will block
+// forever and never return, resulting in a "brain dead" station.
+// therefore, this should almost certainly be disabled (commented out)
+// for stations installed in the ice.
+//#define USE_INTERFACE_CHIP
+
+
+// whether or not to use the lookup tables to speed up the FFTs
+#define USE_DFFT_LUTS
+
+#endif // SN_SnPreCompOptions