S K UCI / Mbed 2 deprecated AutonomousDAQ

Arianna autonomous DAQ firmware

Dependencies:   mbed SDFileSystemFilinfo AriSnProtocol NetServicesMin AriSnComm MODSERIAL PowerControlClkPatch DS1820OW

SnPreCompOptions.h@117:fd6798ba2e26, 2016-10-24 (annotated)

Committer:
uci1
Date:
Mon Oct 24 18:54:21 2016 +0000
Revision:
117:fd6798ba2e26
Parent:
116:8099b754fbb4
Child:
118:d07ceb4b4813
Rev 17.  Updated SnConfigFrame.cpp to add default IP addresses for new stations to be deployed for 2016-2017 season.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
uci1 84:80b15993944e 1 #ifndef SN_SnPreCompOptions
uci1 84:80b15993944e 2 #define SN_SnPreCompOptions
uci1 84:80b15993944e 3
uci1 84:80b15993944e 4 // whether to send debugging output to the serial (usb) port
uci1 116:8099b754fbb4 5 // note that this file may not be included in cpp files, so it
uci1 116:8099b754fbb4 6 // may be necessary to add more DEBUG defines in those files.
uci1 84:80b15993944e 7 // also, the comms and peripherals packages will have their own
uci1 84:80b15993944e 8 // separate debug switches too.
uci1 84:80b15993944e 9 //#define DEBUG
uci1 84:80b15993944e 10
uci1 84:80b15993944e 11 // sorry for the double negative, but.. normally this is NOT DEFINED
uci1 84:80b15993944e 12 // uncommenting this will allow any values to be specified in a configuration
uci1 84:80b15993944e 13 // leaving it commented out is safer
uci1 117:fd6798ba2e26 14 #define DISABLE_CONFIG_SAFETYNETS
uci1 84:80b15993944e 15
uci1 84:80b15993944e 16 // choose which communication peripherals will be used in the comms loop
uci1 84:80b15993944e 17 // for now, twitter is completely not working.
uci1 116:8099b754fbb4 18 // NOTE: remember to set kNcomms in SnConstants.h so it equals the number
uci1 116:8099b754fbb4 19 // of comms enabled!!
uci1 84:80b15993944e 20 #define ENABLE_AFAR_COMM
uci1 84:80b15993944e 21 #define ENABLE_SBD_COMM
uci1 84:80b15993944e 22 //#define ENABLE_USB_COMM
uci1 116:8099b754fbb4 23 //#define ENABLE_AFAR_TWITTER // this is stupid and doesn't work anymore. do not enable.
uci1 84:80b15993944e 24
uci1 84:80b15993944e 25 // turn this on to record how long it takes to take and save events
uci1 84:80b15993944e 26 //#define EVT_TIME_PROFILE
uci1 84:80b15993944e 27
uci1 84:80b15993944e 28 // print the start and stop running messages on the seial (USB) port
uci1 84:80b15993944e 29 // even if other debugging messages are disabled.
uci1 84:80b15993944e 30 //#define SSNOTIFY
uci1 84:80b15993944e 31
uci1 84:80b15993944e 32 // use MODSERIAL (a buffered serial interface) instead of the
uci1 84:80b15993944e 33 // "standard" serial (unbuffered) provided by mbed
uci1 84:80b15993944e 34 #define USE_MODSERIAL
uci1 84:80b15993944e 35
uci1 84:80b15993944e 36
uci1 84:80b15993944e 37 // available CHIPBOARDs -- these values should NEVER change!
uci1 84:80b15993944e 38 // this is just a definition of constants. CHIPBOARD is the
uci1 84:80b15993944e 39 // variable that must be set equal to one of these constants.
uci1 116:8099b754fbb4 40 #define ATWD4CH 0 // set CHIPBOARD to this to get firmware for the 2012-2013 stations (value is arbitrary but unique)
uci1 116:8099b754fbb4 41 #define SST4CH 1 // set CHIPBOARD to this to get firmware for the 2014/2015 stations with a single SST chip (value is arbitrary but unique)
uci1 116:8099b754fbb4 42 #define SST4CH_1GHz 2 // set CHIPBOARD to this to get firmware for the 2015 station with a single SST chip running at 1GHz sampling rather than 2GHz (value is arbitrary but unique)
uci1 116:8099b754fbb4 43 #define SST4CH512 3 // set CHIPBOARD to this to get firmware for the 2014/2015 stations with a single SST chip (value is arbitrary but unique)
uci1 116:8099b754fbb4 44 #define SST4CH512_1GHz 4 // set CHIPBOARD to this to get firmware for the 2015 station with a single SST chip running at 1GHz sampling rather than 2GHz (value is arbitrary but unique)
uci1 84:80b15993944e 45
uci1 84:80b15993944e 46 // which chip/board combination to build this firmware for
uci1 84:80b15993944e 47 //#define CHIPBOARD ATWD4CH
uci1 117:fd6798ba2e26 48 //#define CHIPBOARD SST4CH
uci1 117:fd6798ba2e26 49 #define CHIPBOARD SST4CH_1GHz
uci1 116:8099b754fbb4 50 //#define CHIPBOARD SST4CH512 // warning: 4*512 samples may fill up the 32kB of RAM. it may be necessary to disable Afar comms in order to free up RAM
uci1 116:8099b754fbb4 51 //#define CHIPBOARD SST4CH512_1GHz // warning: 4*512 samples may fill up the 32kB of RAM. it may be necessary to disable Afar comms in order to free up RAM
uci1 84:80b15993944e 52
uci1 84:80b15993944e 53 // whether or not to use the flash memory on the mbed board, to call
uci1 84:80b15993944e 54 // the mbed provided function that gets the MAC address, etc.
uci1 84:80b15993944e 55 // these functions all use the mbed interface chip. it has been found
uci1 84:80b15993944e 56 // that once in while, functions accessing the interface chip will block
uci1 84:80b15993944e 57 // forever and never return, resulting in a "brain dead" station.
uci1 84:80b15993944e 58 // therefore, this should almost certainly be disabled (commented out)
uci1 84:80b15993944e 59 // for stations installed in the ice.
uci1 117:fd6798ba2e26 60 #define USE_INTERFACE_CHIP
uci1 84:80b15993944e 61
uci1 84:80b15993944e 62
uci1 84:80b15993944e 63 // whether or not to use the lookup tables to speed up the FFTs
uci1 84:80b15993944e 64 #define USE_DFFT_LUTS
uci1 84:80b15993944e 65
uci1 116:8099b754fbb4 66
uci1 116:8099b754fbb4 67
uci1 116:8099b754fbb4 68 // use of the real time operating system has not been implemented
uci1 116:8099b754fbb4 69 // for some time -- enabling this will not work any more.
uci1 116:8099b754fbb4 70 // some development will be needed, including a RTOS aware networking package
uci1 116:8099b754fbb4 71 //#define USE_RTOS // change USE_RTOS in CommConstants and EthernetPower also
uci1 116:8099b754fbb4 72
uci1 116:8099b754fbb4 73 // an outdated switch. currently only NetServicesMin is available.
uci1 116:8099b754fbb4 74 //#define USE_ETH_INTERFACE
uci1 116:8099b754fbb4 75
uci1 116:8099b754fbb4 76
uci1 84:80b15993944e 77 #endif // SN_SnPreCompOptions