Diff: app/Config.h

Revision:

0:69f2e28d12c1

Child:

5:6ffeac53b7cb

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/app/Config.h	Tue May 17 00:21:55 2016 +0000
@@ -0,0 +1,80 @@
+/*
+ / _____)             _              | |
+( (____  _____ ____ _| |_ _____  ____| |__
+ \____ \| ___ |    (_   _) ___ |/ ___)  _ \
+ _____) ) ____| | | || |_| ____( (___| | | |
+(______/|_____)_|_|_| \__)_____)\____)_| |_|
+    (C)2015 Semtech
+
+Description: End device communication parameters
+
+License: Revised BSD License, see LICENSE.TXT file include in the project
+
+Maintainer: Uttam Bhat
+*/
+
+#ifndef __LORA_CONFIG_H__
+#define __LORA_CONFIG_H__
+
+/*!
+ * Configure End-Device to use 8-channels corresponding to Block A
+ * Comment/Uncomment to disable/enable Hybrid mode
+ */
+#define USE_BAND_915_HYBRID
+
+#ifndef USE_BAND_915_HYBRID
+/*!
+ * Configure End-Device to use 64-channels across to Block A thru Block H
+ */
+#define USE_BAND_915
+
+#endif
+
+/*!
+ * Join requests trials periodicity. It is the time between RX1/RX2 and next TX
+ */
+#define OVER_THE_AIR_ACTIVATION_DUTYCYCLE           5000000  // value in us
+
+/*!
+ * Defines the application data transmission periodicity. It is the time between RX1/RX2 and next TX
+ */
+#define APP_TX_DUTYCYCLE                            5000000  // value in us
+
+/*!
+ * Default mote datarate
+ * \remark DR_0 : 980 bps; DR_1 : 1760 bps; DR_2 : 3125 bps; DR_3 : 5470 bps; DR_4 : 12500 bps
+ */
+#define LORAWAN_DEFAULT_DATARATE                    DR_0
+
+/*!
+ * LoRaWAN confirmed messages
+ * \remark 1 : Confirmed messages enabled. Must receive ACK from network server
+           0 : Confirmed messages disabled. 
+ */
+#define LORAWAN_CONFIRMED_MSG_ON                    1
+
+/*!
+ * LoRaWAN Adaptive Data Rate
+ *
+ * \remark Please note that when ADR is enabled the end-device uses default datarate of DR_0
+ */
+#define LORAWAN_ADR_ON                              0
+
+/*!
+ * LoRaWAN application port
+ */
+#define LORAWAN_APP_PORT                            5
+
+/*!
+ * User application data buffer size
+ */
+#define LORAWAN_APP_DATA_SIZE                       11
+
+/*!
+ * LoRaWAN User defined Tx Power
+ *
+ * \remark The Tx power level is set as TX_POWER_P_DBM, where 10 <= P <= 30 and P is even value { i.e. P = 10, 12, 14 ... 28 or 30 }
+ */
+#define LORAWAN_TX_POWER                            TX_POWER_20_DBM
+
+#endif //  __LORA_CONFIG_H__
\ No newline at end of file