![](/media/cache/profiles/nikki.png.50x50_q85.jpg)
Program allows for a rectangle displayed on SSD1306-based OLED display to be moved by x- and y-axis uisng two user potentiometers.
Dependencies: mbed Adafruit_GFX
Revision 9:46f39b99737b, committed 2021-11-20
- Comitter:
- tzwell
- Date:
- Sat Nov 20 13:09:32 2021 +0000
- Parent:
- 8:ead6147e31a4
- Commit message:
- First publish, first commit;
Changed in this revision
Adafruit_GFX.lib | Show annotated file Show diff for this revision Revisions of this file |
main.cpp | Show annotated file Show diff for this revision Revisions of this file |
diff -r ead6147e31a4 -r 46f39b99737b Adafruit_GFX.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Adafruit_GFX.lib Sat Nov 20 13:09:32 2021 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/jportela/code/Adafruit_GFX/#e97cd4d2a37b
diff -r ead6147e31a4 -r 46f39b99737b main.cpp --- a/main.cpp Wed Mar 30 14:58:05 2016 +0000 +++ b/main.cpp Sat Nov 20 13:09:32 2021 +0000 @@ -1,54 +1,60 @@ -/* Scan I2C bus on specified pins and prints out -* the all address where an active device responds. -* - By Joseph Ellsworth CTO of A2WH - Take a look at A2WH.com Producing Water from Air using Solar Energy - March-2016 License: https://developer.mbed.org/handbook/MIT-Licence - Please contact us http://a2wh.com for help with custom design projects. - - -* Don't forget 3K pull-up resistors on sda,scl -* -* I tested this by soldering in a I2C chip known to respond at -* address dec=120 hex=70 and the utility got the ack as expected. -* when the chip was de-soldered it was no longer detected. -*/ - +/* Moving the rectangle previewed on the OLED display + * by using potentiometers POT1 and POT2 + * + * November, 2021. + */ #include "mbed.h" - -Serial pc(USBTX, USBRX); -Serial pc2(USBTX, USBRX); +#include "Adafruit_GFX.h" +#include "Adafruit_GFX_Config.h" +#include "Adafruit_SSD1306.h" - #define D_SDA PB_7 - #define D_SCL PB_6 - // sda=PB7, scl=PB_6 Pins specific to Nucleo-F303K8 - // must change pins to match your board. +// I2C bus pins: +#define D_SDA PB_14 +#define D_SCL PB_13 +// I2C address, 60d or 0x3c: +#define I2C_REAL_ADD 0x3c +#define I2C_ADDRESS I2C_REAL_ADD << 1 +// Set OLED width and heigth [pixel]: +#define OLED_WIDTH_PX 128 +#define OLED_HEIGHT_PX 64 +// I2C frequency: +#define I2C_FREQUENCY 400000 +// Multipliers of POT1 and POT2 for OLED rectangle position: +#define WIDTH_SCALER 128 +#define HEIGHT_SCALER 64 +// Initial rectangle position: +#define INITIAL_X_POSITION OLED_WIDTH_PX / 2 +#define INITIAL_Y_POSITION OLED_HEIGHT_PX / 2 +// Refresh rate: +#define REFRESH_RATE_MS 5 +// Half of the potentiometer return value: +#define HALF_INTERVAL 0.5f -I2C i2c(D_SDA, D_SCL); - -DigitalOut myled(LED1); - -int ack; -int address; -void scanI2C() { - for(address=1;address<127;address++) { - ack = i2c.write(address, "11", 1); - if (ack == 0) { - pc.printf("\tFound at %3d -- %3x\r\n", address,address); - } - wait(0.05); - } -} +// Initialize potentiometers' pins: +AnalogIn POT1(PA_0); +AnalogIn POT2(PA_1); + +// Initialize I2C: +I2C i2c(PB_14,PB_13); + +// Initialize OLED display: +Adafruit_SSD1306_I2c myOled(i2c,PB_5,I2C_ADDRESS,OLED_HEIGHT_PX,OLED_WIDTH_PX); int main() { - pc.baud(9600); - pc.printf("I2C scanner \r\n"); - scanI2C(); - pc.printf("Finished Scan\r\n"); - // just blink to let us know the CPU is alive - while(1) { - wait(5.0); - myled = !myled; + + // Initialize OLED: + myOled.begin(); + int x, y = 0; +// i2c.frequency(I2C_FREQUENCY); + while(true) { +// #ifdef GFX_WANT_ABSTRACTS + x = (POT1 - HALF_INTERVAL)*WIDTH_SCALER; + y = (POT2 - HALF_INTERVAL)*HEIGHT_SCALER; + myOled.fillRect(x, y, OLED_WIDTH_PX, OLED_HEIGHT_PX, WHITE); + myOled.display(); +// #endif + wait_ms(REFRESH_RATE_MS); + myOled.clearDisplay(); } } \ No newline at end of file