This is a simple terminal used for send and receive data via SPI (p5, p6, p7). It use the usb as serial (9600bps) interface port.
You are viewing an older revision! See the latest version
Homepage
Commands:¶
#
All the numeric constants MUST be in Hexadecimal #
- C[level] - Change the [level] of the CS line (p8)
- D[data] - Send single byte of [data]
- M[data],[data], .. ,[data] - Send multiple bytes of [data]
- F[data],[size] - Send a flow sized [size] of [data] bytes
- R[size] - Receive [size] bytes
Examples¶
- C0 - Put the CS at logic level 0
- C1 - Put the CS at logic level 1
- Dab - Send out the byte 0xab
- M55,aa,01,ab,cd - Send out the bytes 0x55, 0xaa, 0x01, 0xab, 0xcd
- Fff,05 - Send out 5 bytes of value 0xff
- R10 - Receive 16 bytes