Revision 2:5875b25ed2d0, committed 2014-05-29

Comitter:

tim008

Date:

Thu May 29 17:46:26 2014 +0000

Parent:

1:024f831fa51e

Commit message:

RFID

Changed in this revision

diff -r 024f831fa51e -r 5875b25ed2d0 main.cpp
--- a/main.cpp	Sun Jan 19 14:19:09 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,49 +0,0 @@
-/*
- * Copyright (c) 2011 Paul van der Wielen, Pro-Serv
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to use
- * and implement the software for none commercial reason and usage only and
- * subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * Usage and assumptions:
- * a RFID reader Model MF7(1.05) is configured in wiegand mode and attached 
- * ports per call to class (could be to p5 & p6 via a level converter as to
- * isolate the 5V source voltage from the 3.3V needed by MCU, this can easily
- * be done with diode in series with signal data0 and data1 of RFID reader and
- * pull up on MCU side.
- */
- 
-#include "mbed.h"
-#include "wiegand.h"
-
-DigitalOut flash(LED4);
-
-Wiegand wiegand(p5,p6);
-
-int main() {
-
-    while(1) {
-        if (wiegand.readable()) {
-            // output our data read from rfid card reader to usb port for display
-            // purposes
-            printf ("Site = %x\r\n", wiegand.site());
-            printf ("Data = %x\r\n", wiegand.data());
-            printf ("RFID = %x\r\n", wiegand.rfid());
-            wiegand.clear();
-        }
-        flash = !flash;
-        wait(0.25);
-    }
-}