Tim Bots
NRF51 with mbed OS (5) and RawSerial test
Revision 0:08d373203e2e, committed 2017-01-23
- Comitter:
- tbotsQ
- Date:
- Mon Jan 23 09:46:18 2017 +0000
- Commit message:
- NRF 51 test
Changed in this revision
diff -r 000000000000 -r 08d373203e2e .gitignore --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/.gitignore Mon Jan 23 09:46:18 2017 +0000 @@ -0,0 +1,4 @@ +.build +.mbed +projectfiles +*.py*
diff -r 000000000000 -r 08d373203e2e README.md --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/README.md Mon Jan 23 09:46:18 2017 +0000 @@ -0,0 +1,89 @@ +# Getting started with Blinky on mbed OS + +This is a very simple guide, reviewing the steps required to get Blinky working on an mbed OS platform. + +Please install [mbed CLI](https://github.com/ARMmbed/mbed-cli#installing-mbed-cli). + +## Get the example application! + +From the command line, import the example: + +``` +mbed import mbed-os-example-blinky +cd mbed-os-example-blinky +``` + +### Now compile + +Invoke `mbed compile` specifying the name of your platform and your favorite toolchain (`GCC_ARM`, `ARM`, `IAR`). For example, for the ARM Compiler 5: + +``` +mbed compile -m K64F -t ARM +``` + +Your PC may take a few minutes to compile your code. At the end you should get the following result: + +``` +[snip] ++----------------------------+-------+-------+------+ +| Module | .text | .data | .bss | ++----------------------------+-------+-------+------+ +| Misc | 13939 | 24 | 1372 | +| core/hal | 16993 | 96 | 296 | +| core/rtos | 7384 | 92 | 4204 | +| features/FEATURE_IPV4 | 80 | 0 | 176 | +| frameworks/greentea-client | 1830 | 60 | 44 | +| frameworks/utest | 2392 | 512 | 292 | +| Subtotals | 42618 | 784 | 6384 | ++----------------------------+-------+-------+------+ +Allocated Heap: unknown +Allocated Stack: unknown +Total Static RAM memory (data + bss): 7168 bytes +Total RAM memory (data + bss + heap + stack): 7168 bytes +Total Flash memory (text + data + misc): 43402 bytes +Image: .\.build\K64F\ARM\mbed-os-example-blinky.bin +``` + +### Program your board + +1. Connect your mbed device to the computer over USB. +1. Copy the binary file to the mbed device . +1. Press the reset button to start the program. + +You should see the LED of your platform turning on and off. + +Congratulations if you managed to complete this test! + +## Export the project to Keil MDK and debug your application + +From the command line, run the following command: + +``` +mbed export -m K64F -i uvision +``` + +To debug the application: + +1. Start uVision. +1. Import the uVision project generated earlier. +1. Compile your application and generate an `.axf` file. +1. Make sure uVision is configured to debug over CMSIS-DAP (From the Project menu > Options for Target '...' > Debug tab > Use CMSIS-DAP Debugger). +1. Set breakpoints and start a debug session. + + + +## Troubleshooting + +1. Make sure `mbed-cli` is working correctly and its version is greater than `0.8.9` + + ``` + mbed --version + ``` + + If not, you can update it easily: + + ``` + pip install mbed-cli --upgrade + ``` + +2. If using Keil MDK, make sure you have a license installed. [MDK-Lite](http://www.keil.com/arm/mdk.asp) has a 32KB restriction on code size.
diff -r 000000000000 -r 08d373203e2e img/uvision.png Binary file img/uvision.png has changed
diff -r 000000000000 -r 08d373203e2e main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Mon Jan 23 09:46:18 2017 +0000
@@ -0,0 +1,21 @@
+#include "mbed.h"
+
+DigitalOut led1(LED1);
+DigitalOut led2(LED2);
+
+RawSerial pc(USBTX, USBRX);
+
+void callback() {
+ // Note: you need to actually read from the serial to clear the RX interrupt
+ printf("%c\n", pc.getc());
+ led2 = !led2;
+}
+
+int main() {
+ pc.attach(&callback);
+
+ while (1) {
+ led1 = !led1;
+ wait(0.5);
+ }
+}
\ No newline at end of file
diff -r 000000000000 -r 08d373203e2e mbed-os.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-os.lib Mon Jan 23 09:46:18 2017 +0000 @@ -0,0 +1,1 @@ +https://github.com/ARMmbed/mbed-os/#34c1facf42a174f47fdf9002cd8c6bf10ac41744