Adafruit_GFX - Modified library to add delay after releasing res…

Users » switches » Code » Adafruit_GFX
Modified library to add delay after releasing reset. This is needed because the reset signal is enabling an LDO to provide power to the display and it needs time to turn on.
Fork of Adafruit_GFX by Neal Horman
Diff: Adafruit_SSD1306.cpp

Revision:: 0:c3dcd4c4983a
Child:: 4:853097cfa773
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Adafruit_SSD1306.cpp	Mon Jul 16 02:19:36 2012 +0000
@@ -0,0 +1,274 @@
+/*********************************************************************
+This is a library for our Monochrome OLEDs based on SSD1306 drivers
+
+  Pick one up today in the adafruit shop!
+  ------> http://www.adafruit.com/category/63_98
+
+These displays use SPI to communicate, 4 or 5 pins are required to  
+interface
+
+Adafruit invests time and resources providing this open source code, 
+please support Adafruit and open-source hardware by purchasing 
+products from Adafruit!
+
+Written by Limor Fried/Ladyada  for Adafruit Industries.  
+BSD license, check license.txt for more information
+All text above, and the splash screen below must be included in any redistribution
+*********************************************************************/
+
+/*
+ *  Modified by Neal Horman 7/14/2012 for use in LPC1768
+ */
+
+#include "mbed.h"
+#include "Adafruit_SSD1306.h"
+
+uint8_t splashScreen[SSD1306_LCDHEIGHT * SSD1306_LCDWIDTH / 8] = { 
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
+0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x80, 0x80, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x80, 0xC0, 0xE0, 0xF0, 0xF8, 0xFC, 0xF8, 0xE0, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80,
+0x80, 0x80, 0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0xFF,
+0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x80, 0x80, 0x00, 0x00,
+0x80, 0xFF, 0xFF, 0x80, 0x80, 0x00, 0x80, 0x80, 0x00, 0x80, 0x80, 0x80, 0x80, 0x00, 0x80, 0x80,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x00, 0x00, 0x8C, 0x8E, 0x84, 0x00, 0x00, 0x80, 0xF8,
+0xF8, 0xF8, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xE0, 0xE0, 0xC0, 0x80,
+0x00, 0xE0, 0xFC, 0xFE, 0xFF, 0xFF, 0xFF, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0xFF, 0xC7, 0x01, 0x01,
+0x01, 0x01, 0x83, 0xFF, 0xFF, 0x00, 0x00, 0x7C, 0xFE, 0xC7, 0x01, 0x01, 0x01, 0x01, 0x83, 0xFF,
+0xFF, 0xFF, 0x00, 0x38, 0xFE, 0xC7, 0x83, 0x01, 0x01, 0x01, 0x83, 0xC7, 0xFF, 0xFF, 0x00, 0x00,
+0x01, 0xFF, 0xFF, 0x01, 0x01, 0x00, 0xFF, 0xFF, 0x07, 0x01, 0x01, 0x01, 0x00, 0x00, 0x7F, 0xFF,
+0x80, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x7F, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x01, 0xFF,
+0xFF, 0xFF, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x03, 0x0F, 0x3F, 0x7F, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xE7, 0xC7, 0xC7, 0x8F,
+0x8F, 0x9F, 0xBF, 0xFF, 0xFF, 0xC3, 0xC0, 0xF0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xFC, 0xFC,
+0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xF8, 0xF8, 0xF0, 0xF0, 0xE0, 0xC0, 0x00, 0x01, 0x03, 0x03, 0x03,
+0x03, 0x03, 0x01, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x03, 0x03, 0x03, 0x01, 0x01,
+0x03, 0x01, 0x00, 0x00, 0x00, 0x01, 0x03, 0x03, 0x03, 0x03, 0x01, 0x01, 0x03, 0x03, 0x00, 0x00,
+0x00, 0x03, 0x03, 0x00, 0x00, 0x00, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
+0x03, 0x03, 0x03, 0x03, 0x03, 0x01, 0x00, 0x00, 0x00, 0x01, 0x03, 0x01, 0x00, 0x00, 0x00, 0x03,
+0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+#if (SSD1306_LCDHEIGHT == 64)
+0x00, 0x00, 0x00, 0x80, 0xC0, 0xE0, 0xF0, 0xF9, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x3F, 0x1F, 0x0F,
+0x87, 0xC7, 0xF7, 0xFF, 0xFF, 0x1F, 0x1F, 0x3D, 0xFC, 0xF8, 0xF8, 0xF8, 0xF8, 0x7C, 0x7D, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x7F, 0x3F, 0x0F, 0x07, 0x00, 0x30, 0x30, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0xFE, 0xFE, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xC0, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xC0, 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x7F, 0x7F, 0x3F, 0x1F,
+0x0F, 0x07, 0x1F, 0x7F, 0xFF, 0xFF, 0xF8, 0xF8, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0xF8, 0xE0,
+0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0xFE, 0x00, 0x00,
+0x00, 0xFC, 0xFE, 0xFC, 0x0C, 0x06, 0x06, 0x0E, 0xFC, 0xF8, 0x00, 0x00, 0xF0, 0xF8, 0x1C, 0x0E,
+0x06, 0x06, 0x06, 0x0C, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFE, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xFC,
+0xFE, 0xFC, 0x00, 0x18, 0x3C, 0x7E, 0x66, 0xE6, 0xCE, 0x84, 0x00, 0x00, 0x06, 0xFF, 0xFF, 0x06,
+0x06, 0xFC, 0xFE, 0xFC, 0x0C, 0x06, 0x06, 0x06, 0x00, 0x00, 0xFE, 0xFE, 0x00, 0x00, 0xC0, 0xF8,
+0xFC, 0x4E, 0x46, 0x46, 0x46, 0x4E, 0x7C, 0x78, 0x40, 0x18, 0x3C, 0x76, 0xE6, 0xCE, 0xCC, 0x80,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x01, 0x07, 0x0F, 0x1F, 0x1F, 0x3F, 0x3F, 0x3F, 0x3F, 0x1F, 0x0F, 0x03,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00,
+0x00, 0x0F, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x03, 0x07, 0x0E, 0x0C,
+0x18, 0x18, 0x0C, 0x06, 0x0F, 0x0F, 0x0F, 0x00, 0x00, 0x01, 0x0F, 0x0E, 0x0C, 0x18, 0x0C, 0x0F,
+0x07, 0x01, 0x00, 0x04, 0x0E, 0x0C, 0x18, 0x0C, 0x0F, 0x07, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00,
+0x00, 0x0F, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x07,
+0x07, 0x0C, 0x0C, 0x18, 0x1C, 0x0C, 0x06, 0x06, 0x00, 0x04, 0x0E, 0x0C, 0x18, 0x0C, 0x0F, 0x07,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+#endif
+};
+
+Adafruit_SSD1306::Adafruit_SSD1306(SPI &spi, PinName DC, PinName RST, PinName CS)
+    : Adafruit_GFX(SSD1306_LCDWIDTH, SSD1306_LCDHEIGHT)
+    , rst(RST,false), cs(CS,true), dc(DC,false), mspi(spi)
+{
+    memcpy(buffer,splashScreen,sizeof(buffer));
+    begin();
+    display();
+};
+
+void Adafruit_SSD1306::begin(uint8_t vccstate)
+{
+    rst = 1;
+    // VDD (3.3V) goes high at start, lets just chill for a ms
+    wait_ms(1);
+    // bring reset low
+    rst = 0;
+    // wait 10ms
+    wait_ms(10);
+    // bring out of reset
+    rst = 1;
+    // turn on VCC (9V?)
+    
+#if defined SSD1306_128_32
+    // Init sequence for 128x32 OLED module
+    ssd1306_command(SSD1306_DISPLAYOFF);                    // 0xAE
+    ssd1306_command(SSD1306_SETDISPLAYCLOCKDIV);            // 0xD5
+    ssd1306_command(0x80);                                  // the suggested ratio 0x80
+    ssd1306_command(SSD1306_SETMULTIPLEX);                  // 0xA8
+    ssd1306_command(0x1F);
+    ssd1306_command(SSD1306_SETDISPLAYOFFSET);              // 0xD3
+    ssd1306_command(0x0);                                   // no offset
+    ssd1306_command(SSD1306_SETSTARTLINE | 0x0);            // line #0
+    ssd1306_command(SSD1306_CHARGEPUMP);                    // 0x8D
+    if (vccstate == SSD1306_EXTERNALVCC) 
+    { ssd1306_command(0x10); }
+    else 
+    { ssd1306_command(0x14); }
+    ssd1306_command(SSD1306_MEMORYMODE);                    // 0x20
+    ssd1306_command(0x00);                                  // 0x0 act like ks0108
+    ssd1306_command(SSD1306_SEGREMAP | 0x1);
+    ssd1306_command(SSD1306_COMSCANDEC);
+    ssd1306_command(SSD1306_SETCOMPINS);                    // 0xDA
+    ssd1306_command(0x02);
+    ssd1306_command(SSD1306_SETCONTRAST);                   // 0x81
+    ssd1306_command(0x8F);
+    ssd1306_command(SSD1306_SETPRECHARGE);                  // 0xd9
+    if (vccstate == SSD1306_EXTERNALVCC) 
+    { ssd1306_command(0x22); }
+    else 
+    { ssd1306_command(0xF1); }
+    ssd1306_command(SSD1306_SETVCOMDETECT);                 // 0xDB
+    ssd1306_command(0x40);
+    ssd1306_command(SSD1306_DISPLAYALLON_RESUME);           // 0xA4
+    ssd1306_command(SSD1306_NORMALDISPLAY);                 // 0xA6
+#endif
+    
+#if defined SSD1306_128_64
+    // Init sequence for 128x64 OLED module
+    ssd1306_command(SSD1306_DISPLAYOFF);                    // 0xAE
+    ssd1306_command(SSD1306_SETDISPLAYCLOCKDIV);            // 0xD5
+    ssd1306_command(0x80);                                  // the suggested ratio 0x80
+    ssd1306_command(SSD1306_SETMULTIPLEX);                  // 0xA8
+    ssd1306_command(0x3F);
+    ssd1306_command(SSD1306_SETDISPLAYOFFSET);              // 0xD3
+    ssd1306_command(0x0);                                   // no offset
+    ssd1306_command(SSD1306_SETSTARTLINE | 0x0);            // line #0
+    ssd1306_command(SSD1306_CHARGEPUMP);                    // 0x8D
+    if (vccstate == SSD1306_EXTERNALVCC) 
+    { ssd1306_command(0x10); }
+    else 
+    { ssd1306_command(0x14); }
+    ssd1306_command(SSD1306_MEMORYMODE);                    // 0x20
+    ssd1306_command(0x00);                                  // 0x0 act like ks0108
+    ssd1306_command(SSD1306_SEGREMAP | 0x1);
+    ssd1306_command(SSD1306_COMSCANDEC);
+    ssd1306_command(SSD1306_SETCOMPINS);                    // 0xDA
+    ssd1306_command(0x12);
+    ssd1306_command(SSD1306_SETCONTRAST);                   // 0x81
+    if (vccstate == SSD1306_EXTERNALVCC) 
+    { ssd1306_command(0x9F); }
+    else 
+    { ssd1306_command(0xCF); }
+    ssd1306_command(SSD1306_SETPRECHARGE);                  // 0xd9
+    if (vccstate == SSD1306_EXTERNALVCC) 
+    { ssd1306_command(0x22); }
+    else 
+    { ssd1306_command(0xF1); }
+    ssd1306_command(SSD1306_SETVCOMDETECT);                 // 0xDB
+    ssd1306_command(0x40);
+    ssd1306_command(SSD1306_DISPLAYALLON_RESUME);           // 0xA4
+    ssd1306_command(SSD1306_NORMALDISPLAY);                 // 0xA6
+#endif
+    
+    ssd1306_command(SSD1306_DISPLAYON);//--turn on oled panel
+}
+
+// the most basic function, set a single pixel
+void Adafruit_SSD1306::drawPixel(int16_t x, int16_t y, uint16_t color)
+{
+    if ((x < 0) || (x >= width()) || (y < 0) || (y >= height()))
+        return;
+    
+    // check rotation, move pixel around if necessary
+    switch (getRotation())
+    {
+        case 1:
+            swap(x, y);
+            x = _rawWidth - x - 1;
+            break;
+        case 2:
+            x = _rawWidth - x - 1;
+            y = _rawHeight - y - 1;
+            break;
+        case 3:
+            swap(x, y);
+            y = _rawHeight - y - 1;
+            break;
+    }  
+    
+    // x is which column
+    if (color == WHITE) 
+        buffer[x+ (y/8)*SSD1306_LCDWIDTH] |= _BV((y%8));  
+    else
+        buffer[x+ (y/8)*SSD1306_LCDWIDTH] &= ~_BV((y%8)); 
+}
+
+void Adafruit_SSD1306::invertDisplay(bool i)
+{
+    if (i)
+        ssd1306_command(SSD1306_INVERTDISPLAY);
+    else
+        ssd1306_command(SSD1306_NORMALDISPLAY);
+}
+
+void Adafruit_SSD1306::ssd1306_command(uint8_t c)
+{
+    cs = 1;
+    dc = 0;
+    cs = 0;
+    mspi.write(c);
+    cs = 1;
+}
+
+void Adafruit_SSD1306::ssd1306_data(uint8_t c)
+{
+    cs = 1;
+    dc = 1;
+    cs = 0;
+    mspi.write(c);
+    cs = 1;
+}
+
+void Adafruit_SSD1306::display(void)
+{
+    ssd1306_command(SSD1306_SETLOWCOLUMN | 0x0);  // low col = 0
+    ssd1306_command(SSD1306_SETHIGHCOLUMN | 0x0);  // hi col = 0
+    ssd1306_command(SSD1306_SETSTARTLINE | 0x0); // line #0
+
+    cs = 1;
+    dc = 1;
+    cs = 0;
+    
+    for (uint16_t i=0; i<(SSD1306_LCDWIDTH*SSD1306_LCDHEIGHT/8); i++)
+        mspi.write(buffer[i]);
+
+    // i wonder why we have to do this (check datasheet)
+    if (SSD1306_LCDHEIGHT == 32)
+    {
+        for (uint16_t i=0; i<(SSD1306_LCDWIDTH*SSD1306_LCDHEIGHT/8); i++)
+            mspi.write(0);
+    }
+    
+    cs = 1;
+}
+
+// clear everything
+void Adafruit_SSD1306::clearDisplay(void)
+{
+    memset(buffer,0,sizeof(buffer));
+}
Repository toolbox

Export to desktop IDE
Repository details

Type:	Library
Created:	29 Oct 2015
Imports:	1
Forks:	1
Commits:	18
Dependents:	0
Dependencies:	0
Followers:	1
This repository is Public (Unlisted).
Diff: Adafruit_SSD1306.cpp

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning
