Steven Osborn / Mbed 2 deprecated LoDev_RXTX

Basic RX/TX example, this is the firmware that LoDev S76S comes with initially.

Dependencies:   mbed SX1276RonothLib

LoDev RX/TX Example

Transmit

By default LoDev comes on in receive mode. To switch to transmit mode, connect PC2 to 3.3v and press the reset switch. In TX mode the blue LED is normally off and blinks on briefly when transmitting.

Receive

When in RX mode the LED is normally on and turns off briefly when receiving a packet. This is the default mode.

Diff: README.md

Revision:
2:a93ffb29a2d2
Child:
3:80e4a46e676c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/README.md	Mon Jul 15 22:05:34 2019 +0000
@@ -0,0 +1,9 @@
+RX/TX Example
+=============
+
+This is a barebones example that allows a device to transmit or recieve packets
+using LoRa modulation.
+
+By default the device is in RX mode.  ***To enable TX mode connect PC2 to 3v3**
+ and reset the device via reset button.
+