otm8009a.c

00001 /**
00002   ******************************************************************************
00003   * @file    otm8009a.c
00004   * @author  MCD Application Team
00005   * @version V1.0.2
00006   * @date    27-January-2017
00007   * @brief   This file provides the LCD Driver for KoD KM-040TMP-02-0621 (WVGA)
00008   *          DSI LCD Display OTM8009A.   
00009   ******************************************************************************
00010   * @attention
00011   *
00012   * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
00013   *
00014   * Redistribution and use in source and binary forms, with or without modification,
00015   * are permitted provided that the following conditions are met:
00016   *   1. Redistributions of source code must retain the above copyright notice,
00017   *      this list of conditions and the following disclaimer.
00018   *   2. Redistributions in binary form must reproduce the above copyright notice,
00019   *      this list of conditions and the following disclaimer in the documentation
00020   *      and/or other materials provided with the distribution.
00021   *   3. Neither the name of STMicroelectronics nor the names of its contributors
00022   *      may be used to endorse or promote products derived from this software
00023   *      without specific prior written permission.
00024   *
00025   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
00026   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
00027   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
00028   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
00029   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
00030   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
00031   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
00032   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
00033   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
00034   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
00035   *
00036   ******************************************************************************
00037   */
00038 
00039 /* Includes ------------------------------------------------------------------*/
00040 #include "otm8009a.h"
00041 
00042 /** @addtogroup BSP
00043   * @{
00044   */
00045   
00046 /** @addtogroup Components
00047   * @{
00048   */ 
00049 
00050 /** @defgroup OTM8009A OTM8009A
00051   * @brief     This file provides a set of functions needed to drive the 
00052   *            otm8009a IC display driver.
00053   * @{
00054   */
00055 
00056 /* Private types -------------------------------------------------------------*/
00057 /* Private variables ---------------------------------------------------------*/
00058 /* Private constants ---------------------------------------------------------*/
00059 /** @defgroup OTM8009A_Private_Constants OTM8009A Private Constants
00060   * @{
00061   */
00062 
00063 /*
00064  * @brief Constant tables of register settings used to transmit DSI
00065  * command packets as power up initialization sequence of the KoD LCD (OTM8009A LCD Driver)
00066  */
00067 const uint8_t lcdRegData1[]  = {0x80,0x09,0x01,0xFF};
00068 const uint8_t lcdRegData2[]  = {0x80,0x09,0xFF};
00069 const uint8_t lcdRegData3[]  = {0x00,0x09,0x0F,0x0E,0x07,0x10,0x0B,0x0A,0x04,0x07,0x0B,0x08,0x0F,0x10,0x0A,0x01,0xE1};
00070 const uint8_t lcdRegData4[]  = {0x00,0x09,0x0F,0x0E,0x07,0x10,0x0B,0x0A,0x04,0x07,0x0B,0x08,0x0F,0x10,0x0A,0x01,0xE2};
00071 const uint8_t lcdRegData5[]  = {0x79,0x79,0xD8};
00072 const uint8_t lcdRegData6[]  = {0x00,0x01,0xB3};
00073 const uint8_t lcdRegData7[]  = {0x85,0x01,0x00,0x84,0x01,0x00,0xCE};
00074 const uint8_t lcdRegData8[]  = {0x18,0x04,0x03,0x39,0x00,0x00,0x00,0x18,0x03,0x03,0x3A,0x00,0x00,0x00,0xCE};
00075 const uint8_t lcdRegData9[]  = {0x18,0x02,0x03,0x3B,0x00,0x00,0x00,0x18,0x01,0x03,0x3C,0x00,0x00,0x00,0xCE};
00076 const uint8_t lcdRegData10[] = {0x01,0x01,0x20,0x20,0x00,0x00,0x01,0x02,0x00,0x00,0xCF};
00077 const uint8_t lcdRegData11[] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xCB};
00078 const uint8_t lcdRegData12[] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xCB};
00079 const uint8_t lcdRegData13[] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xCB};
00080 const uint8_t lcdRegData14[] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xCB};
00081 const uint8_t lcdRegData15[] = {0x00,0x04,0x04,0x04,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xCB};
00082 const uint8_t lcdRegData16[] = {0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x04,0x04,0x04,0x04,0x00,0x00,0x00,0x00,0xCB};
00083 const uint8_t lcdRegData17[] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xCB};
00084 const uint8_t lcdRegData18[] = {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xCB};
00085 const uint8_t lcdRegData19[] = {0x00,0x26,0x09,0x0B,0x01,0x25,0x00,0x00,0x00,0x00,0xCC};
00086 const uint8_t lcdRegData20[] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x26,0x0A,0x0C,0x02,0xCC};
00087 const uint8_t lcdRegData21[] = {0x25,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xCC};
00088 const uint8_t lcdRegData22[] = {0x00,0x25,0x0C,0x0A,0x02,0x26,0x00,0x00,0x00,0x00,0xCC};
00089 const uint8_t lcdRegData23[] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x25,0x0B,0x09,0x01,0xCC};
00090 const uint8_t lcdRegData24[] = {0x26,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xCC};
00091 const uint8_t lcdRegData25[] = {0xFF,0xFF,0xFF,0xFF};    
00092 /*
00093   * CASET value (Column Address Set) : X direction LCD GRAM boundaries
00094   * depending on LCD orientation mode and PASET value (Page Address Set) : Y direction
00095   * LCD GRAM boundaries depending on LCD orientation mode
00096   * XS[15:0] = 0x000 = 0, XE[15:0] = 0x31F = 799 for landscape mode : apply to CASET
00097   * YS[15:0] = 0x000 = 0, YE[15:0] = 0x31F = 799 for portrait mode : : apply to PASET
00098   */
00099 const uint8_t lcdRegData27[] = {0x00, 0x00, 0x03, 0x1F, OTM8009A_CMD_CASET};
00100 /*
00101   * XS[15:0] = 0x000 = 0, XE[15:0] = 0x1DF = 479 for portrait mode : apply to CASET
00102   * YS[15:0] = 0x000 = 0, YE[15:0] = 0x1DF = 479 for landscape mode : apply to PASET
00103  */
00104 const uint8_t lcdRegData28[] = {0x00, 0x00, 0x01, 0xDF, OTM8009A_CMD_PASET};
00105 
00106 
00107 const uint8_t ShortRegData1[]  = {OTM8009A_CMD_NOP, 0x00};
00108 const uint8_t ShortRegData2[]  = {OTM8009A_CMD_NOP, 0x80};
00109 const uint8_t ShortRegData3[]  = {0xC4, 0x30};
00110 const uint8_t ShortRegData4[]  = {OTM8009A_CMD_NOP, 0x8A};
00111 const uint8_t ShortRegData5[]  = {0xC4, 0x40};
00112 const uint8_t ShortRegData6[]  = {OTM8009A_CMD_NOP, 0xB1};
00113 const uint8_t ShortRegData7[]  = {0xC5, 0xA9};
00114 const uint8_t ShortRegData8[]  = {OTM8009A_CMD_NOP, 0x91};
00115 const uint8_t ShortRegData9[]  = {0xC5, 0x34};
00116 const uint8_t ShortRegData10[] = {OTM8009A_CMD_NOP, 0xB4};
00117 const uint8_t ShortRegData11[] = {0xC0, 0x50};
00118 const uint8_t ShortRegData12[] = {0xD9, 0x4E};
00119 const uint8_t ShortRegData13[] = {OTM8009A_CMD_NOP, 0x81};
00120 const uint8_t ShortRegData14[] = {0xC1, 0x66};
00121 const uint8_t ShortRegData15[] = {OTM8009A_CMD_NOP, 0xA1};
00122 const uint8_t ShortRegData16[] = {0xC1, 0x08};
00123 const uint8_t ShortRegData17[] = {OTM8009A_CMD_NOP, 0x92};
00124 const uint8_t ShortRegData18[] = {0xC5, 0x01};
00125 const uint8_t ShortRegData19[] = {OTM8009A_CMD_NOP, 0x95};
00126 const uint8_t ShortRegData20[] = {OTM8009A_CMD_NOP, 0x94};
00127 const uint8_t ShortRegData21[] = {0xC5, 0x33};
00128 const uint8_t ShortRegData22[] = {OTM8009A_CMD_NOP, 0xA3};
00129 const uint8_t ShortRegData23[] = {0xC0, 0x1B};
00130 const uint8_t ShortRegData24[] = {OTM8009A_CMD_NOP, 0x82};
00131 const uint8_t ShortRegData25[] = {0xC5, 0x83};
00132 const uint8_t ShortRegData26[] = {0xC4, 0x83};
00133 const uint8_t ShortRegData27[] = {0xC1, 0x0E};
00134 const uint8_t ShortRegData28[] = {OTM8009A_CMD_NOP, 0xA6};
00135 const uint8_t ShortRegData29[] = {OTM8009A_CMD_NOP, 0xA0};
00136 const uint8_t ShortRegData30[] = {OTM8009A_CMD_NOP, 0xB0};
00137 const uint8_t ShortRegData31[] = {OTM8009A_CMD_NOP, 0xC0};
00138 const uint8_t ShortRegData32[] = {OTM8009A_CMD_NOP, 0xD0};
00139 const uint8_t ShortRegData33[] = {OTM8009A_CMD_NOP, 0x90};
00140 const uint8_t ShortRegData34[] = {OTM8009A_CMD_NOP, 0xE0};
00141 const uint8_t ShortRegData35[] = {OTM8009A_CMD_NOP, 0xF0};
00142 const uint8_t ShortRegData36[] = {OTM8009A_CMD_SLPOUT, 0x00};
00143 const uint8_t ShortRegData37[] = {OTM8009A_CMD_COLMOD, OTM8009A_COLMOD_RGB565};
00144 const uint8_t ShortRegData38[] = {OTM8009A_CMD_COLMOD, OTM8009A_COLMOD_RGB888};
00145 const uint8_t ShortRegData39[] = {OTM8009A_CMD_MADCTR, OTM8009A_MADCTR_MODE_LANDSCAPE};
00146 const uint8_t ShortRegData40[] = {OTM8009A_CMD_WRDISBV, 0x7F};
00147 const uint8_t ShortRegData41[] = {OTM8009A_CMD_WRCTRLD, 0x2C};
00148 const uint8_t ShortRegData42[] = {OTM8009A_CMD_WRCABC, 0x02};
00149 const uint8_t ShortRegData43[] = {OTM8009A_CMD_WRCABCMB, 0xFF};
00150 const uint8_t ShortRegData44[] = {OTM8009A_CMD_DISPON, 0x00};
00151 const uint8_t ShortRegData45[] = {OTM8009A_CMD_RAMWR, 0x00};
00152 const uint8_t ShortRegData46[] = {0xCF, 0x00};
00153 const uint8_t ShortRegData47[] = {0xC5, 0x66};
00154 const uint8_t ShortRegData48[] = {OTM8009A_CMD_NOP, 0xB6};
00155 const uint8_t ShortRegData49[] = {0xF5, 0x06};
00156 const uint8_t ShortRegData50[] = {OTM8009A_CMD_NOP, 0xB1};
00157 const uint8_t ShortRegData51[] = {0xC6, 0x06};
00158 /**
00159   * @}
00160   */
00161 
00162 /* Private macros ------------------------------------------------------------*/
00163 /* Private functions ---------------------------------------------------------*/
00164 /** @defgroup OTM8009A_Exported_Variables
00165   * @{
00166   */
00167 
00168 /**
00169   * @}
00170   */
00171 
00172 /* Exported functions ---------------------------------------------------------*/
00173 /** @defgroup OTM8009A_Exported_Functions OTM8009A Exported Functions
00174   * @{
00175   */
00176 
00177 /**
00178   * @brief  DSI IO write short/long command.
00179   * @note : Can be surcharged by application code implementation of the function.
00180   */
00181 __weak void DSI_IO_WriteCmd(uint32_t NbrParams, uint8_t *pParams)
00182 {
00183   /* NOTE : This function Should not be modified, when it is needed,
00184             the DSI_IO_WriteCmd could be implemented in the user file
00185    */
00186 }
00187 
00188 /**
00189   * @brief  Initializes the LCD KoD display part by communication in DSI mode in Video Mode
00190   *         with IC Display Driver OTM8009A (see IC Driver specification for more information).
00191   * @param  hdsi_eval : pointer on DSI configuration structure
00192   * @param  hdsivideo_handle : pointer on DSI video mode configuration structure
00193   * @retval Status
00194   */
00195 uint8_t OTM8009A_Init(uint32_t ColorCoding, uint32_t orientation)
00196 {
00197   /* Enable CMD2 to access vendor specific commands                               */
00198   /* Enter in command 2 mode and set EXTC to enable address shift function (0x00) */
00199   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData1);
00200   DSI_IO_WriteCmd( 3, (uint8_t *)lcdRegData1);
00201 
00202   /* Enter ORISE Command 2 */
00203   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData2); /* Shift address to 0x80 */
00204   DSI_IO_WriteCmd( 2, (uint8_t *)lcdRegData2);
00205 
00206   /////////////////////////////////////////////////////////////////////
00207   /* SD_PCH_CTRL - 0xC480h - 129th parameter - Default 0x00          */
00208   /* Set SD_PT                                                       */
00209   /* -> Source output level during porch and non-display area to GND */
00210   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData2);
00211   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData3);
00212   OTM8009A_IO_Delay(10);
00213   /* Not documented */
00214   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData4);
00215   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData5);
00216   OTM8009A_IO_Delay(10);
00217   /////////////////////////////////////////////////////////////////////
00218 
00219   /* PWR_CTRL4 - 0xC4B0h - 178th parameter - Default 0xA8 */
00220   /* Set gvdd_en_test                                     */
00221   /* -> enable GVDD test mode !!!                         */
00222   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData6);
00223   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData7);
00224 
00225   /* PWR_CTRL2 - 0xC590h - 146th parameter - Default 0x79      */
00226   /* Set pump 4 vgh voltage                                    */
00227   /* -> from 15.0v down to 13.0v                               */
00228   /* Set pump 5 vgh voltage                                    */
00229   /* -> from -12.0v downto -9.0v                               */
00230   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData8);
00231   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData9);
00232 
00233   /* P_DRV_M - 0xC0B4h - 181th parameter - Default 0x00 */
00234   /* -> Column inversion                                */
00235   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData10);
00236   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData11);
00237 
00238   /* VCOMDC - 0xD900h - 1st parameter - Default 0x39h */
00239   /* VCOM Voltage settings                            */
00240   /* -> from -1.0000v downto -1.2625v                 */
00241   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData1);
00242   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData12);
00243 
00244   /* Oscillator adjustment for Idle/Normal mode (LPDT only) set to 65Hz (default is 60Hz) */
00245   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData13);
00246   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData14);
00247 
00248   /* Video mode internal */
00249   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData15);
00250   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData16);
00251 
00252   /* PWR_CTRL2 - 0xC590h - 147h parameter - Default 0x00 */
00253   /* Set pump 4&5 x6                                     */
00254   /* -> ONLY VALID when PUMP4_EN_ASDM_HV = "0"           */
00255   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData17);
00256   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData18);
00257 
00258   /* PWR_CTRL2 - 0xC590h - 150th parameter - Default 0x33h */
00259   /* Change pump4 clock ratio                              */
00260   /* -> from 1 line to 1/2 line                            */
00261   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData19);
00262   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData9);
00263 
00264   /* GVDD/NGVDD settings */
00265   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData1);
00266   DSI_IO_WriteCmd( 2, (uint8_t *)lcdRegData5);
00267 
00268   /* PWR_CTRL2 - 0xC590h - 149th parameter - Default 0x33h */
00269   /* Rewrite the default value !                           */
00270   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData20);
00271   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData21);
00272 
00273   /* Panel display timing Setting 3 */
00274   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData22);
00275   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData23);
00276 
00277   /* Power control 1 */
00278   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData24);
00279   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData25);
00280 
00281   /* Source driver precharge */
00282   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData13);
00283   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData26);
00284 
00285   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData15);
00286   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData27);
00287 
00288   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData28);
00289   DSI_IO_WriteCmd( 2, (uint8_t *)lcdRegData6);
00290 
00291   /* GOAVST */
00292   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData2);
00293   DSI_IO_WriteCmd( 6, (uint8_t *)lcdRegData7);
00294 
00295   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData29);
00296   DSI_IO_WriteCmd( 14, (uint8_t *)lcdRegData8);
00297 
00298   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData30);
00299   DSI_IO_WriteCmd( 14, (uint8_t *)lcdRegData9);
00300 
00301   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData31);
00302   DSI_IO_WriteCmd( 10, (uint8_t *)lcdRegData10);
00303 
00304   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData32);
00305   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData46);
00306 
00307   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData2);
00308   DSI_IO_WriteCmd( 10, (uint8_t *)lcdRegData11);
00309 
00310   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData33);
00311   DSI_IO_WriteCmd( 15, (uint8_t *)lcdRegData12);
00312 
00313   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData29);
00314   DSI_IO_WriteCmd( 15, (uint8_t *)lcdRegData13);
00315 
00316   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData30);
00317   DSI_IO_WriteCmd( 10, (uint8_t *)lcdRegData14);
00318 
00319   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData31);
00320   DSI_IO_WriteCmd( 15, (uint8_t *)lcdRegData15);
00321 
00322   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData32);
00323   DSI_IO_WriteCmd( 15, (uint8_t *)lcdRegData16);
00324 
00325   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData34);
00326   DSI_IO_WriteCmd( 10, (uint8_t *)lcdRegData17);
00327 
00328   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData35);
00329   DSI_IO_WriteCmd( 10, (uint8_t *)lcdRegData18);
00330 
00331   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData2);
00332   DSI_IO_WriteCmd( 10, (uint8_t *)lcdRegData19);
00333 
00334   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData33);
00335   DSI_IO_WriteCmd( 15, (uint8_t *)lcdRegData20);
00336 
00337   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData29);
00338   DSI_IO_WriteCmd( 15, (uint8_t *)lcdRegData21);
00339 
00340   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData30);
00341   DSI_IO_WriteCmd( 10, (uint8_t *)lcdRegData22);
00342 
00343   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData31);
00344   DSI_IO_WriteCmd( 15, (uint8_t *)lcdRegData23);
00345 
00346   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData32);
00347   DSI_IO_WriteCmd( 15, (uint8_t *)lcdRegData24);
00348 
00349   /////////////////////////////////////////////////////////////////////////////
00350   /* PWR_CTRL1 - 0xc580h - 130th parameter - default 0x00 */
00351   /* Pump 1 min and max DM                                */
00352   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData13);
00353   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData47);
00354   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData48);
00355   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData49);
00356   /////////////////////////////////////////////////////////////////////////////
00357 
00358   /* CABC LEDPWM frequency adjusted to 19,5kHz */
00359   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData50);
00360   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData51);
00361   
00362   /* Exit CMD2 mode */
00363   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData1);
00364   DSI_IO_WriteCmd( 3, (uint8_t *)lcdRegData25);
00365 
00366   /*************************************************************************** */
00367   /* Standard DCS Initialization TO KEEP CAN BE DONE IN HSDT                   */
00368   /*************************************************************************** */
00369 
00370   /* NOP - goes back to DCS std command ? */
00371   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData1);
00372           
00373   /* Gamma correction 2.2+ table (HSDT possible) */
00374   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData1);
00375   DSI_IO_WriteCmd( 16, (uint8_t *)lcdRegData3);
00376   
00377   /* Gamma correction 2.2- table (HSDT possible) */
00378   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData1);
00379   DSI_IO_WriteCmd( 16, (uint8_t *)lcdRegData4);
00380           
00381   /* Send Sleep Out command to display : no parameter */
00382   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData36);
00383   
00384   /* Wait for sleep out exit */
00385   OTM8009A_IO_Delay(120);
00386 
00387   switch(ColorCoding)
00388   {
00389   case OTM8009A_FORMAT_RBG565 :
00390     /* Set Pixel color format to RGB565 */
00391     DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData37);
00392     break;
00393   case OTM8009A_FORMAT_RGB888 :
00394     /* Set Pixel color format to RGB888 */
00395     DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData38);
00396     break;
00397   default :
00398     break;
00399   }
00400 
00401   /* Send command to configure display in landscape orientation mode. By default
00402       the orientation mode is portrait  */
00403   if(orientation == OTM8009A_ORIENTATION_LANDSCAPE)
00404   {
00405     DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData39);
00406     DSI_IO_WriteCmd( 4, (uint8_t *)lcdRegData27);
00407     DSI_IO_WriteCmd( 4, (uint8_t *)lcdRegData28);
00408   }
00409 
00410   /** CABC : Content Adaptive Backlight Control section start >> */
00411   /* Note : defaut is 0 (lowest Brightness), 0xFF is highest Brightness, try 0x7F : intermediate value */
00412   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData40);
00413 
00414   /* defaut is 0, try 0x2C - Brightness Control Block, Display Dimming & BackLight on */
00415   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData41);
00416 
00417   /* defaut is 0, try 0x02 - image Content based Adaptive Brightness [Still Picture] */
00418   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData42);
00419 
00420   /* defaut is 0 (lowest Brightness), 0xFF is highest Brightness */
00421   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData43);
00422 
00423   /** CABC : Content Adaptive Backlight Control section end << */
00424 
00425   /* Send Command Display On */
00426   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData44);
00427 
00428   /* NOP command */
00429   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData1);
00430 
00431   /* Send Command GRAM memory write (no parameters) : this initiates frame write via other DSI commands sent by */
00432   /* DSI host from LTDC incoming pixels in video mode */
00433   DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData45);
00434 
00435   return 0;
00436 }
00437 
00438 /**
00439   * @}
00440   */
00441 
00442 /**
00443   * @}
00444   */
00445 
00446 /**
00447   * @}
00448   */
00449 
00450 /**
00451   * @}
00452   */
00453 
00454 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/