Diff: POKITTO_XTERNALS/Arduino/pins_arduino.h

Revision:

9:754a7af30890

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/POKITTO_XTERNALS/Arduino/pins_arduino.h	Thu Oct 12 10:36:40 2017 +0000
@@ -0,0 +1,222 @@
+/*
+  pins_arduino.h - Pin definition functions for Arduino
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2007 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
+*/
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include "PokittoFakeavr.h"
+
+#define NUM_DIGITAL_PINS            20
+#define NUM_ANALOG_INPUTS           6
+#define analogInputToDigitalPin(p)  ((p < 6) ? (p) + 14 : -1)
+
+#if defined(__AVR_ATmega8__)
+#define digitalPinHasPWM(p)         ((p) == 9 || (p) == 10 || (p) == 11)
+#else
+#define digitalPinHasPWM(p)         ((p) == 3 || (p) == 5 || (p) == 6 || (p) == 9 || (p) == 10 || (p) == 11)
+#endif
+
+const static uint8_t SS   = 10;
+const static uint8_t MOSI = 11;
+const static uint8_t MISO = 12;
+const static uint8_t SCK  = 13;
+
+//const static uint8_t SDA = 18;
+//const static uint8_t SCL = 19;
+const static uint8_t LED_BUILTIN = 13;
+
+/*const static uint8_t A0 = 14;
+const static uint8_t A1 = 15;
+const static uint8_t A2 = 16;
+const static uint8_t A3 = 17;
+const static uint8_t A4 = 18;
+const static uint8_t A5 = 19;
+const static uint8_t A6 = 20;
+const static uint8_t A7 = 21;*/
+
+#define digitalPinToPCICR(p)    (((p) >= 0 && (p) <= 21) ? (&PCICR) : ((uint8_t *)0))
+#define digitalPinToPCICRbit(p) (((p) <= 7) ? 2 : (((p) <= 13) ? 0 : 1))
+#define digitalPinToPCMSK(p)    (((p) <= 7) ? (&PCMSK2) : (((p) <= 13) ? (&PCMSK0) : (((p) <= 21) ? (&PCMSK1) : ((uint8_t *)0))))
+#define digitalPinToPCMSKbit(p) (((p) <= 7) ? (p) : (((p) <= 13) ? ((p) - 8) : ((p) - 14)))
+
+#ifdef ARDUINO_MAIN
+
+// On the Arduino board, digital pins are also used
+// for the analog output (software PWM).  Analog input
+// pins are a separate set.
+
+// ATMEL ATMEGA8 & 168 / ARDUINO
+//
+//                  +-\/-+
+//            PC6  1|    |28  PC5 (AI 5)
+//      (D 0) PD0  2|    |27  PC4 (AI 4)
+//      (D 1) PD1  3|    |26  PC3 (AI 3)
+//      (D 2) PD2  4|    |25  PC2 (AI 2)
+// PWM+ (D 3) PD3  5|    |24  PC1 (AI 1)
+//      (D 4) PD4  6|    |23  PC0 (AI 0)
+//            VCC  7|    |22  GND
+//            GND  8|    |21  AREF
+//            PB6  9|    |20  AVCC
+//            PB7 10|    |19  PB5 (D 13)
+// PWM+ (D 5) PD5 11|    |18  PB4 (D 12)
+// PWM+ (D 6) PD6 12|    |17  PB3 (D 11) PWM
+//      (D 7) PD7 13|    |16  PB2 (D 10) PWM
+//      (D 8) PB0 14|    |15  PB1 (D 9) PWM
+//                  +----+
+//
+// (PWM+ indicates the additional PWM pins on the ATmega168.)
+
+// ATMEL ATMEGA1280 / ARDUINO
+//
+// 0-7 PE0-PE7   works
+// 8-13 PB0-PB5  works
+// 14-21 PA0-PA7 works
+// 22-29 PH0-PH7 works
+// 30-35 PG5-PG0 works
+// 36-43 PC7-PC0 works
+// 44-51 PJ7-PJ0 works
+// 52-59 PL7-PL0 works
+// 60-67 PD7-PD0 works
+// A0-A7 PF0-PF7
+// A8-A15 PK0-PK7
+
+
+// these arrays map port names (e.g. port B) to the
+// appropriate addresses for various functions (e.g. reading
+// and writing)
+
+uint8_t NULL_DATA = 0;
+
+const uint8_t* PROGMEM port_to_mode_PGM[] = {
+	&NULL_DATA,
+	&NULL_DATA,
+	&DDRB,
+	&DDRC,
+	&DDRD,
+};
+
+const uint8_t* PROGMEM port_to_output_PGM[] = {
+	&NULL_DATA,
+	&NULL_DATA,
+	&PORTB,
+	&PORTC,
+	&PORTD,
+};
+
+const uint8_t* PROGMEM port_to_input_PGM[] = {
+	&NULL_DATA,
+	&NULL_DATA,
+	&PINB,
+	&PINC,
+	&PIND,
+};
+
+
+const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
+	PD, /* 0 */
+	PD,
+	PD,
+	PD,
+	PD,
+	PD,
+	PD,
+	PD,
+	PB, /* 8 */
+	PB,
+	PB,
+	PB,
+	PB,
+	PB,
+	PC, /* 14 */
+	PC,
+	PC,
+	PC,
+	PC,
+	PC,
+};
+
+const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
+	_BV(0), /* 0, port D */
+	_BV(1),
+	_BV(2),
+	_BV(3),
+	_BV(4),
+	_BV(5),
+	_BV(6),
+	_BV(7),
+	_BV(0), /* 8, port B */
+	_BV(1),
+	_BV(2),
+	_BV(3),
+	_BV(4),
+	_BV(5),
+	_BV(0), /* 14, port C */
+	_BV(1),
+	_BV(2),
+	_BV(3),
+	_BV(4),
+	_BV(5),
+};
+
+const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
+	NOT_ON_TIMER, /* 0 - port D */
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+	// on the ATmega168, digital pin 3 has hardware pwm
+#if defined(__AVR_ATmega8__)
+	NOT_ON_TIMER,
+#else
+	TIMER2B,
+#endif
+	NOT_ON_TIMER,
+	// on the ATmega168, digital pins 5 and 6 have hardware pwm
+#if defined(__AVR_ATmega8__)
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+#else
+	TIMER0B,
+	TIMER0A,
+#endif
+	NOT_ON_TIMER,
+	NOT_ON_TIMER, /* 8 - port B */
+	TIMER1A,
+	TIMER1B,
+#if defined(__AVR_ATmega8__)
+	TIMER2,
+#else
+	TIMER2A,
+#endif
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+	NOT_ON_TIMER, /* 14 - port C */
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+};
+
+#endif
+
+#endif