UTouchCD.h

00001 // UTouchCD.h
00002 // ----------
00003 //
00004 // Since there are slight deviations in all touch screens you should run a
00005 // calibration on your display module. Run the UTouch_Calibration sketch
00006 // that came with this library and follow the on-screen instructions to
00007 // update this file.
00008 //
00009 // Remember that is you have multiple display modules they will probably 
00010 // require different calibration data so you should run the calibration
00011 // every time you switch to another module.
00012 // You can, of course, store calibration data for all your modules here
00013 // and comment out the ones you dont need at the moment.
00014 //
00015 
00016 // These calibration settings works with my ITDB02-3.2S.
00017 // They MIGHT work on your 320x240 display module, but you should run the
00018 // calibration sketch anyway. If you are using a display with any other
00019 // resolution you MUST calibrate it as these settings WILL NOT work.
00020 //#define CAL_X 0x00378F66UL
00021 //#define CAL_Y 0x03C34155UL
00022 //#define CAL_S 0x000EF13FUL
00023 
00024 //#define CAL_X 0x001DC771UL
00025 //#define CAL_Y 0x01E200A6UL
00026 //#define CAL_S 0x000EF13FUL
00027 
00028 #ifndef UTouchCD_h
00029 #define UTouchCD_h
00030 
00031 #ifdef __cplusplus
00032 extern "C" {
00033 #endif
00034 
00035 #define CAL_X 0x041E80EDUL
00036 #define CAL_Y 0x002A0F6FUL
00037 #define CAL_S 0x000EF13FUL
00038 
00039 #ifdef __cplusplus
00040 }
00041 #endif
00042 
00043 #endif