Diff: esp_attemp3/ESP8266/ESP8266.h

Revision:

0:3954a906acc2

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/esp_attemp3/ESP8266/ESP8266.h	Mon Dec 05 16:39:27 2016 +0000
@@ -0,0 +1,67 @@
+#ifndef ESP8266_H
+#define ESP8266_H
+
+#include <string>
+#include "mbed.h"
+
+class ESP8266
+{
+public:
+/**
+  * ESP8266 constructor
+  *
+  * @param tx TX pin
+  * @param rx RX pin
+  * @param br Baud Rate
+  */
+  ESP8266(PinName tx, PinName rx, int br);
+
+  /**
+  * ESP8266 destructor
+  */
+  ~ESP8266();
+
+void SendCMD(char * s);
+void Reset(void);
+void RcvReply(char * r, int to);
+void GetList(char * l);
+void Join(char * id, char * pwd);
+void GetIP(char * ip);
+void SetMode(char mode);
+void Quit(void);
+void SetSingle(void);
+void SetMultiple(void);
+void GetConnStatus(char * st);
+void StartServerMode(int port);
+void CloseServerMode(void);
+
+private:
+Serial comm;
+void AddEOL(char * s);
+void AddChar(char * s, char c);
+void itoa(int c, char s[]);
+
+};
+  
+#endif
+/*
+    COMMAND TABLE
+    Basic:
+    AT: Just to generate "OK" reply
+    Wifi:
+    AT+RST:  restart the module
+    AT+CWMODE: define wifi mode; AT+CWMODE=<mode> 1= Sta, 2= AP, 3=both; Inquiry: AT+CWMODE? or AT+CWMODE=?
+    AT+CWJAP: join the AP wifi; AT+ CWJAP =<ssid>,< pwd > - ssid = ssid, pwd = wifi password, both between quotes; Inquiry: AT+ CWJAP?
+    AT+CWLAP: list the AP wifi
+    AT+CWQAP: quit the AP wifi; Inquiry: AT+CWQAP=?  
+    * AT+CWSAP: set the parameters of AP; AT+CWSAP= <ssid>,<pwd>,<chl>,<ecn> - ssid, pwd, chl = channel, ecn = encryption; Inquiry: AT+CWJAP?
+    TCP/IP:
+    AT+CIPSTATUS: get the connection status
+    * AT+CIPSTART: set up TCP or UDP connection 1)single connection (+CIPMUX=0) AT+CIPSTART= <type>,<addr>,<port>; 2) multiple connection (+CIPMUX=1) AT+CIPSTART= <id><type>,<addr>, <port> - id = 0-4, type = TCP/UDP, addr = IP address, port= port; Inquiry: AT+CIPSTART=?
+    * AT+CIPSEND: send data; 1)single connection(+CIPMUX=0) AT+CIPSEND=<length>; 2) multiple connection (+CIPMUX=1) AT+CIPSEND= <id>,<length>; Inquiry: AT+CIPSEND=?
+    * AT+CIPCLOSE: close TCP or UDP connection; AT+CIPCLOSE=<id> or AT+CIPCLOSE; Inquiry: AT+CIPCLOSE=?
+    AT+CIFSR: Get IP address; Inquiry: AT+ CIFSR=?
+    AT+CIPMUX:  set mutiple connection; AT+ CIPMUX=<mode> - 0 for single connection 1 for mutiple connection; Inquiry: AT+CIPMUX?
+    AT+CIPSERVER: set as server; AT+ CIPSERVER= <mode>[,<port> ] - mode 0 to close server mode, mode 1 to open; port = port; Inquiry: AT+CIFSR=?
+    * +IPD: received data
+*/
\ No newline at end of file