SHIVAM TRIPATHI / Mbed 2 deprecated ADXL335_3axis_Accel

Read an analog value using ADC.

Dependencies:   mbed

Files at this revision

API Documentation at this revision

Revision 3:7cef8e5abfe5, committed 2016-09-04

Comitter:
shivamtripathi
Date:
Sun Sep 04 08:04:35 2016 +0000
Parent:
2:6d058686efbf
Commit message:
Accelerometer ( ADXL335 or GY-61) interfacing to FRDM-KL25Z

Changed in this revision

main.cpp Show annotated file Show diff for this revision Revisions of this file
mbed.bld Show annotated file Show diff for this revision Revisions of this file 
diff -r 6d058686efbf -r 7cef8e5abfe5 main.cpp
--- a/main.cpp	Thu Mar 12 08:22:00 2015 +0000
+++ b/main.cpp	Sun Sep 04 08:04:35 2016 +0000
@@ -1,24 +1,28 @@
+/****************************************************************************
+ ****** 3-axis Accelerometer ADXL335 or GY-61 interfacing to FRDM-KL25Z *****
+ ******                  Author :  SHIVAM TRIPATHI                     ******  
+ ***************************************************************************/
+
 #include "mbed.h"
- 
-AnalogIn analog_value(A0);
- 
+
+Serial pc(USBTX, USBRX);
+AnalogIn analog_value1(A0);  //Output of X-axis at analog pin A0  ........ (Refer pinout)
+AnalogIn analog_value2(A1);  //Output of y-axis at analog pin A1
+AnalogIn analog_value3(A2);  //Output of z-axis at analog pin A1
+
 DigitalOut led(LED1);
 
 int main() {
-    float meas;
+    int x,y,z;
     
     printf("\nAnalogIn example\n");
     
     while(1) {
-        meas = analog_value.read(); // Converts and read the analog input value (value from 0.0 to 1.0)
-        meas = meas * 3300; // Change the value to be in the 0 to 3300 range
-        printf("measure = %.0f mV\n", meas);
-        if (meas > 2000) { // If the value is greater than 2V then switch the LED on
-          led = 1;
-        }
-        else {
-          led = 0;
-        }
-        wait(0.2); // 200 ms
+        x = analog_value1.read_u16();           // Reads X-axis value and then converts in 16 bit format (3.3V --> 65535).........Analog values are read
+        y = analog_value2.read_u16();           // Reads Y-axis value and then converts in 16 bit format (3.3V --> 65535)
+        z = analog_value3.read_u16();           // Reads Z-axis value and then converts in 16 bit format (3.3V --> 65535)
+        printf("\r x = %d  y = %d  z = %d  \n", x,y,z);    //Prints output on pc Serial terminal (serial USB com driver is a must)
+        wait(0.5); // 500 ms
+        
     }
 }

diff -r 6d058686efbf -r 7cef8e5abfe5 mbed.bld
--- a/mbed.bld	Thu Mar 12 08:22:00 2015 +0000
+++ b/mbed.bld	Sun Sep 04 08:04:35 2016 +0000
@@ -1,1 +1,1 @@
-http://mbed.org/users/mbed_official/code/mbed/builds/7e07b6fb45cf
\ No newline at end of file
+http://mbed.org/users/mbed_official/code/mbed/builds/2e9cc70d1897
\ No newline at end of file