Diff: Control/Servo/Servo.h

Revision:

0:d6402bcd58f7

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Control/Servo/Servo.h	Sat Dec 01 15:10:42 2018 +0000
@@ -0,0 +1,109 @@
+/* mbed R/C Servo Library
+ * Copyright (c) 2007-2010 sford, cstyles
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+  
+#ifndef MBED_SERVO_H
+#define MBED_SERVO_H
+
+#include "mbed.h"
+
+/** Servo control class, based on a PwmOut
+ *
+ * Example:
+ * @code
+ * // Continuously sweep the servo through it's full range
+ * #include "mbed.h"
+ * #include "Servo.h"
+ * 
+ * Servo myservo(p21);
+ * 
+ * int main() {
+ *     while(1) {
+ *         for(int i=0; i<100; i++) {
+ *             myservo = i/100.0;
+ *             wait(0.01);
+ *         }
+ *         for(int i=100; i>0; i--) {
+ *             myservo = i/100.0;
+ *             wait(0.01);
+ *         }
+ *     }
+ * }
+ * @endcode
+ */
+class Servo {
+
+public:
+    /** Create a servo object connected to the specified PwmOut pin
+     *
+     * @param pin PwmOut pin to connect to 
+     */
+    Servo(PinName pin);
+    
+    /** Set the servo position, normalised to it's full range
+     *
+     * @param percent A normalised number 0.0-1.0 to represent the full range.
+     */
+    void write(float percent);
+    
+    /**  Read the servo motors current position
+     *
+     * @param returns A normalised number 0.0-1.0  representing the full range.
+     */
+    float read();
+    
+    /** Set the servo position
+     *
+     * @param degrees Servo position in degrees
+     */
+    void position(float degrees);
+    
+    /**  Allows calibration of the range and angles for a particular servo
+     *
+     * @param range Pulsewidth range from center (1.5ms) to maximum/minimum position in seconds
+     * @param degrees Angle from centre to maximum/minimum position in degrees
+     */
+     //NX8921(JR PROPO)の180度モードに合わせたパラメータ（デフォルトは120度モード）。他のサーボに変えた時、変更する必要あり。
+    void calibrate(float range_us = 600.0, float degrees = 90.0, float center_us = 1500.0, int period_ms_ = 5); 
+    
+    
+    void rawwrite(int width_us);
+    
+    float readangle();
+    
+        
+    /**  Shorthand for the write and read functions */
+    Servo& operator= (float percent);
+    Servo& operator= (Servo& rhs);
+    operator float();
+
+protected:
+    PwmOut _pwm;
+    float _range;
+    float _degrees;
+    float _p;
+    float _angle;
+    float _center;
+    int _period_ms;
+    float p2angle(float p);
+};
+
+#endif