Revision 0:28a157482b70, committed 2017-06-09

Comitter:

sheralikhan

Date:

Fri Jun 09 06:03:03 2017 +0000

Commit message:

Device controller

Changed in this revision

diff -r 000000000000 -r 28a157482b70 MFRC522.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/MFRC522.lib	Fri Jun 09 06:03:03 2017 +0000
@@ -0,0 +1,1 @@
+https://developer.mbed.org/users/sheralikhan/code/MFRC522/#6951895eb979

diff -r 000000000000 -r 28a157482b70 man.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/man.cpp	Fri Jun 09 06:03:03 2017 +0000
@@ -0,0 +1,129 @@
+//Test of cheap 13.56 Mhz RFID-RC522 module from eBay
+//This code is based on Martin Olejar's MFRC522 library. Minimal changes
+//Adapted for Nucleo STM32 F401RE. Should work on other Nucleos too
+
+//Connect as follows:
+//RFID pins        ->  Nucleo header CN5 (Arduino-compatible header)
+//----------------------------------------
+//RFID IRQ=pin5    ->   Not used. Leave open
+//RFID MISO=pin4   ->   Nucleo SPI_MISO=PA_6=D12
+//RFID MOSI=pin3   ->   Nucleo SPI_MOSI=PA_7=D11
+//RFID SCK=pin2    ->   Nucleo SPI_SCK =PA_5=D13
+//RFID SDA=pin1    ->   Nucleo SPI_CS  =PB_6=D10
+//RFID RST=pin7    ->   Nucleo         =PA_9=D8
+//3.3V and Gnd to the respective pins
+
+#include "mbed.h"
+#include "MFRC522.h"
+#include <sstream>
+#include <string>
+
+// CARD number
+uint8_t CARD_1 = 0x10;
+uint8_t CARD_2 = 0xA0;
+uint8_t CARD_3 = 0x26;
+uint8_t CARD_4 = 0x83;
+
+uint8_t CARD_5 = 0x50;
+uint8_t CARD_6 = 0x4C;
+uint8_t CARD_7 = 0x33;
+uint8_t CARD_8 = 0x83;
+
+uint8_t CARD_9 = 0x10;
+uint8_t CARD_10 = 0x70;
+uint8_t CARD_11 = 0xFD;
+uint8_t CARD_12 = 0x73;
+
+#define SPI_MOSI    D11
+#define SPI_MISO    D12
+#define SPI_SCLK    D13
+#define SPI_CS      D10
+
+// WIZWiki-W7500 Pin for MFRC522 reset(pick another D pin if you need D8)
+#define MF_RESET    D9
+#define VOLUME 0.08
+
+
+Serial pc(USBTX, USBRX);
+
+MFRC522    RfChip (SPI_MOSI, SPI_MISO, SPI_SCLK, SPI_CS, MF_RESET);        // Init MFRC522 card
+
+DigitalOut LedGreen(D7);
+DigitalOut LedYellow(D6);
+PwmOut Buzzer(D5);
+float beat_duration;
+
+// Plays a sound with the defined frequency, duration, and volume
+void playNote(float frequency, float volume)
+{
+    Buzzer.period(1.0/(double)frequency);
+    Buzzer = ((double)volume/2.0);
+}
+char* store_buf;
+char data2[8];
+
+int main(void)
+{
+    printf("Welcome to My Smart Home.... ");
+    wait_ms(50);
+    printf("\n\r");
+    printf("Please swipe card.. Here ");
+    wait_ms(50);
+    printf("\n\r");
+    // Init. RC522 Chip
+    RfChip.PCD_Init();
+
+    while (true) {
+        LedGreen = 1;
+        // Look for new cards
+        if ( ! RfChip.PICC_IsNewCardPresent()) {
+            wait_ms(50);
+            continue;
+        }
+        LedGreen = 0;
+        wait_ms(50);
+        // Select one of the cards
+        if ( ! RfChip.PICC_ReadCardSerial()) {
+            wait_ms(50);
+            continue;
+        }
+        LedGreen = 1;
+        wait_ms(50);
+
+        // Print Card UID
+        for (uint8_t i = 0; i < RfChip.uid.size; i++) {
+            store_buf+= sprintf(store_buf,"%X",RfChip.uid.uidByte[i]);
+        }
+        printf("\n\r");
+        // Print Card type
+        uint8_t piccType = RfChip.PICC_GetType(RfChip.uid.sak);
+        LedGreen = 0;
+        wait_ms(50);
+
+        // store_buf=data2;
+        if((RfChip.uid.uidByte[0] == CARD_1) && (RfChip.uid.uidByte[1] == CARD_2) && (RfChip.uid.uidByte[2] == CARD_3) && (RfChip.uid.uidByte[3] == CARD_4)) {
+            LedYellow=1;
+            //  wait_ms(1000);
+            pc.printf("Yello Led is On.....");
+            printf("\n\r");
+
+        } else if((RfChip.uid.uidByte[0] == CARD_5) && (RfChip.uid.uidByte[1] == CARD_6) && (RfChip.uid.uidByte[2] == CARD_7) && (RfChip.uid.uidByte[3] == CARD_8)) {
+            playNote(999.999, VOLUME);
+            pc.printf("Buzzer is On.....");
+            printf("\n\r");
+
+        }  else if((RfChip.uid.uidByte[0] == CARD_9) && (RfChip.uid.uidByte[1] == CARD_10) && (RfChip.uid.uidByte[2] == CARD_11) && (RfChip.uid.uidByte[3] == CARD_12)) {
+            pc.printf("This is a master Card: ");
+            printf("\n\r");
+            LedYellow=0;
+            Buzzer=0;
+            pc.printf("ALL Device off.....");
+            printf("\n\r");
+            pc.printf("Thank you.....");
+        }
+        printf("\n\r");
+
+
+
+    }
+}
\ No newline at end of file

diff -r 000000000000 -r 28a157482b70 mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Fri Jun 09 06:03:03 2017 +0000
@@ -0,0 +1,1 @@
+https://mbed.org/users/mbed_official/code/mbed/builds/97feb9bacc10
\ No newline at end of file