History

Changes made : Manchester coding disabled, freq_dev removed, power raised, ready mode not directly set before TXON since it is automatically initialised in POR, ; Doubts : Do we need SDN mode, should wut be ON for temp sensor, TX length for >255 default tip

2015-10-04, by shekhar [Sun, 04 Oct 2015 10:35:31 +0000] rev 6

Changes made : Manchester coding disabled, freq_dev removed, power raised, ready mode not directly set before TXON since it is automatically initialised in POR, ; Doubts : Do we need SDN mode, should wut be ON for temp sensor, TX length for >255

removed irq_disabling during spiwrite

2015-10-04, by shekhar [Sun, 04 Oct 2015 00:08:21 +0000] rev 5

removed irq_disabling during spiwrite

latest code (after testing on GS)

2015-10-03, by shekhar [Sat, 03 Oct 2015 23:08:09 +0000] rev 4

latest code (after testing on GS)

working code... perseus decoded perfectly...; issue : data rate not properly synchronised

2015-08-15, by shekhar [Sat, 15 Aug 2015 17:04:45 +0000] rev 3

working code... perseus decoded perfectly...; issue : data rate not properly synchronised

Code corrected...ready to be tested on USRP;

2015-08-15, by shekhar [Sat, 15 Aug 2015 14:12:27 +0000] rev 2

Code corrected...ready to be tested on USRP;

Corrections required are commented

2015-08-15, by shekhar [Sat, 15 Aug 2015 13:00:15 +0000] rev 1

Corrections required are commented

Transmitted ... but usrp received incomplete bits not sure if fault is with RFM22B or USRP

2015-08-15, by shekhar [Sat, 15 Aug 2015 11:47:12 +0000] rev 0

Transmitted ... but usrp received incomplete bits not sure if fault is with RFM22B or USRP