adi_sense_gpio.h

00001 /*
00002 Copyright 2017 (c) Analog Devices, Inc.
00003 
00004 All rights reserved.
00005 
00006 Redistribution and use in source and binary forms, with or without
00007 modification, are permitted provided that the following conditions are met:
00008   - Redistributions of source code must retain the above copyright
00009     notice, this list of conditions and the following disclaimer.
00010   - Redistributions in binary form must reproduce the above copyright
00011     notice, this list of conditions and the following disclaimer in
00012     the documentation and/or other materials provided with the
00013     distribution.
00014   - Neither the name of Analog Devices, Inc. nor the names of its
00015     contributors may be used to endorse or promote products derived
00016     from this software without specific prior written permission.
00017   - The use of this software may or may not infringe the patent rights
00018     of one or more patent holders. This license does not release you
00019     from the requirement that you obtain separate licenses from these
00020     patent holders to use this software.
00021   - Use of the software either in source or binary form, must be run
00022     on or directly connected to an Analog Devices Inc. component.
00023 
00024 THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
00025 IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
00026 MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
00027 IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
00028 INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
00029 LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
00030 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
00031 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
00032 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
00033 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
00034 */
00035 
00036 /*!
00037  ******************************************************************************
00038  * @file:   adi_sense_gpio.h
00039  * @brief:  ADISENSE OS-dependent wrapper layer for GPIO interface
00040  *-----------------------------------------------------------------------------
00041  */
00042 
00043 #ifndef __ADI_SENSE_GPIO_H__
00044 #define __ADI_SENSE_GPIO_H__
00045 
00046 #include "inc/adi_sense_types.h"
00047 #include "inc/adi_sense_platform.h"
00048 
00049 /*! @ingroup ADISENSE_Host */
00050 
00051 /*! @addtogroup ADISENSE_Gpio ADISENSE Host GPIO interface functions
00052  *  @{
00053  */
00054 
00055 /*! GPIO pin identifiers */
00056 typedef enum
00057 {
00058     ADI_SENSE_GPIO_PIN_RESET  = 0, /*!< RESET GPIO output signal */
00059     ADI_SENSE_GPIO_PIN_ERROR ,     /*!< ERROR GPIO input signal */
00060     ADI_SENSE_GPIO_PIN_ALERT ,     /*!< ALERT GPIO input signal */
00061     ADI_SENSE_GPIO_PIN_DATAREADY , /*!< DATAREADY GPIO input signal */
00062 } ADI_SENSE_GPIO_PIN ;
00063 
00064 /*!
00065  * GPIO callback function signature
00066  *
00067  * @param[in] ePinId The GPIO pin which triggered the interrupt notification
00068  * @param[in] pArg   Optional opaque parameter to be passed to the callback
00069  */
00070 typedef void (*ADI_SENSE_GPIO_CALLBACK )(
00071     ADI_SENSE_GPIO_PIN                ePinId,
00072     void                           * pArg);
00073 
00074 /*! A handle used in all API functions to identify the GPIO interface context */
00075 typedef void* ADI_SENSE_GPIO_HANDLE ;
00076 
00077 #ifdef __cplusplus
00078 extern "C"
00079 {
00080 #endif
00081 
00082 /*!
00083  * @brief Open the SPI interface and allocate resources
00084  *
00085  * @param[in]  pConfig  Pointer to platform-specific GPIO interface details
00086  * @param[out] phDevice Pointer to return a GPIO interface context handle
00087  *
00088  * @return Status
00089  *         - #ADI_SENSE_SUCCESS Call completed successfully
00090  *         - #ADI_SENSE_NO_MEM  Failed to allocate memory for interface context
00091  */
00092 ADI_SENSE_RESULT  adi_sense_GpioOpen(
00093     ADI_SENSE_PLATFORM_GPIO_CONFIG * pConfig,
00094     ADI_SENSE_GPIO_HANDLE           * phDevice);
00095 
00096 /*!
00097  * @brief Close GPIO interface and free resources
00098  *
00099  * @param[in] hDevice GPIO interface context handle (@ref adi_sense_GpioOpen)
00100  */
00101 void adi_sense_GpioClose(
00102     ADI_SENSE_GPIO_HANDLE             hDevice);
00103 
00104 /*!
00105  * @brief Get the state of the specified GPIO pin
00106  *
00107  * @param[in]  hDevice GPIO interface context handle (@ref adi_sense_GpioOpen)
00108  * @param[in]  ePinId  GPIO pin to be read
00109  * @param[out] pbState Pointer to return the state of the GPIO pin
00110  *
00111  * @return Status
00112  *         - #ADI_SENSE_SUCCESS Call completed successfully
00113  *         - #ADI_SENSE_INVALID_DEVICE_NUM Invalid GPIO pin specified
00114  */
00115 ADI_SENSE_RESULT  adi_sense_GpioGet(
00116     ADI_SENSE_GPIO_HANDLE             hDevice,
00117     ADI_SENSE_GPIO_PIN                ePinId,
00118     bool_t                         * pbState);
00119 
00120 /*!
00121  * @brief Set the state of the specified GPIO pin
00122  *
00123  * @param[in] hDevice GPIO interface context handle (@ref adi_sense_GpioOpen)
00124  * @param[in] ePinId  GPIO pin to be set
00125  * @param[in] bState  The state to set for GPIO pin
00126  *
00127  * @return Status
00128  *         - #ADI_SENSE_SUCCESS Call completed successfully
00129  *         - #ADI_SENSE_INVALID_DEVICE_NUM Invalid GPIO pin specified
00130  */
00131 ADI_SENSE_RESULT  adi_sense_GpioSet(
00132     ADI_SENSE_GPIO_HANDLE             hDevice,
00133     ADI_SENSE_GPIO_PIN                ePinId,
00134     bool_t                           bState);
00135 
00136 /*!
00137  * @brief Enable interrupt notifications on the specified GPIO pin
00138  *
00139  * @param[in] hDevice  GPIO interface context handle (@ref adi_sense_GpioOpen)
00140  * @param[in] ePinId   GPIO pin on which to enable interrupt notifications
00141  * @param[in] callback Callback function to invoke when the GPIO is asserted
00142  * @param[in] arg      Optional opaque parameter to be passed to the callback
00143  *
00144  * @return Status
00145  *         - #ADI_SENSE_SUCCESS Call completed successfully
00146  *         - #ADI_SENSE_INVALID_DEVICE_NUM Invalid GPIO pin specified
00147  */
00148 ADI_SENSE_RESULT  adi_sense_GpioIrqEnable(
00149     ADI_SENSE_GPIO_HANDLE             hDevice,
00150     ADI_SENSE_GPIO_PIN                ePinId,
00151     ADI_SENSE_GPIO_CALLBACK           callback,
00152     void                           * arg);
00153 
00154 /*!
00155  * @brief Disable interrupt notifications on the specified GPIO pin
00156  *
00157  * @param[in] hDevice  GPIO interface context handle (@ref adi_sense_GpioOpen)
00158  * @param[in] ePinId   GPIO pin on which to disable interrupt notifications
00159  *
00160  * @return Status
00161  *         - #ADI_SENSE_SUCCESS Call completed successfully
00162  *         - #ADI_SENSE_INVALID_DEVICE_NUM Invalid GPIO pin specified
00163  */
00164 ADI_SENSE_RESULT  adi_sense_GpioIrqDisable(
00165     ADI_SENSE_GPIO_HANDLE             hDevice,
00166     ADI_SENSE_GPIO_PIN                ePinId);
00167 
00168 #ifdef __cplusplus
00169 }
00170 #endif
00171 
00172 /*!
00173  * @}
00174  */
00175 
00176 #endif /* __ADI_SENSE_GPIO_H__ */