Stanley Cohen
/
SLCD_minus_mod
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependents: ACC_LCD_341_Basic ESeif-SSD541-HW141 SBart_ACC_LCD_341_Basic ACC_LCD_341_Basic_Final_ALM
Revision 3:f70873bc6121, committed 2014-01-27
- Comitter:
- star297
- Date:
- Mon Jan 27 21:57:38 2014 +0000
- Parent:
- 1:1579bcd31410
- Child:
- 4:ec7b3c9b2aeb
- Commit message:
- Confirmed colon/dot functions, tidy code & test. Contrast found not be very effective.
Changed in this revision
--- a/FRDM-s401.h Mon Jan 20 21:08:32 2014 +0000
+++ b/FRDM-s401.h Mon Jan 27 21:57:38 2014 +0000
@@ -1,12 +1,10 @@
-#ifndef __FRDM_S401_H_
-#define __FRDM_S401_H_
/*^^^^^^^^^^^^^^^^ LCD HARDWARE CONECTION ^^^^^^^^^^^^^^^^^^^^^^^^*/
#define _LCDFRONTPLANES (8) // # of frontPlanes
#define _LCDBACKPLANES (4) // # of backplanes
/*
LCD logical organization definition
- This section indicate how the LCD is distributed how many characteres of (7-seg, 14,seg, 16 seg, or colums in case of Dot Matrix) does it contain
+ This section indicates how the LCD is distributed how many characteres of (7-seg, 14,seg, 16 seg, or colums in case of Dot Matrix) does it contain
First character is forced only one can be written
*/
@@ -21,7 +19,7 @@
#define _CHARNUM (4) //number of chars that can be written
#define _CHAR_SIZE (2) // Used only when Dot Matrix is used
-#define _LCDTYPE (2) //indicate how many LCD_WF are required to write a single Character / or Column in case of DOT matrix LCD
+#define _LCDTYPE (2) //indicate how many LCD_WF are required to write a single Character
/*
Following definitions indicate how characters are associated to waveform
@@ -30,46 +28,33 @@
#if HARDWARE_CONFIG == 0
// LCD PIN1 to LCDWF0 Rev B
-#define CHAR1a 37 // LCD Pin 5
-#define CHAR1b 17 // LCD Pin 6
-#define CHAR2a 7 // LCD Pin 7
-#define CHAR2b 8 // LCD Pin 8
-#define CHAR3a 53 // LCD Pin 9
-#define CHAR3b 38 // LCD Pin 10
-#define CHAR4a 10 // LCD Pin 11
-#define CHAR4b 11 // LCD Pin 12
-#define CHARCOM0 40 // LCD Pin 1
-#define CHARCOM1 52 // LCD Pin 2
-#define CHARCOM2 19 // LCD Pin 3
-#define CHARCOM3 18 // LCD Pin 4
-
-/*Special Symbols */
-#define SPECIAL_SYMBOL_COUNT 4
-
-#define _LCD_DP1_ON() SymbolON(17,0)
-#define _LCD_DP2_ON() SymbolON(8,0)
-#define _LCD_DP3_ON() SymbolON(38,0)
-#define _LCD_COL_ON() SymbolON(11,0)
-
-#define _LCD_DP1_OFF() SymbolOFF(17,0)
-#define _LCD_DP2_OFF() SymbolOFF(8,0)
-#define _LCD_DP3_OFF() SymbolOFF(38,0)
-#define _LCD_COL_OFF() SymbolOFF(11,0)
+#define CHAR1a 37 // LCD Pin 5
+#define CHAR1b 17 // LCD Pin 6
+#define CHAR2a 7 // LCD Pin 7
+#define CHAR2b 8 // LCD Pin 8
+#define CHAR3a 53 // LCD Pin 9
+#define CHAR3b 38 // LCD Pin 10
+#define CHAR4a 10 // LCD Pin 11
+#define CHAR4b 11 // LCD Pin 12
+#define CHARCOM0 40 // LCD Pin 1
+#define CHARCOM1 52 // LCD Pin 2
+#define CHARCOM2 19 // LCD Pin 3
+#define CHARCOM3 18 // LCD Pin 4
// LCD PIN1 to LCDWF2 for FRDM-KL46Z
#elif HARDWARE_CONFIG == 1
-#define CHAR1a 37 // LCD Pin 5
-#define CHAR1b 17 // LCD Pin 6
-#define CHAR2a 7 // LCD Pin 7
-#define CHAR2b 8 // LCD Pin 8
-#define CHAR3a 12 // LCD Pin 9
-#define CHAR3b 26 // LCD Pin 10
-#define CHAR4a 10 // LCD Pin 11
-#define CHAR4b 11 // LCD Pin 12
-#define CHARCOM0 51 // LCD Pin 1
-#define CHARCOM1 52 // LCD Pin 2
-#define CHARCOM2 19 // LCD Pin 3
-#define CHARCOM3 16 // LCD Pin 4
+#define CHAR1a 37 // LCD Pin 5
+#define CHAR1b 17 // LCD Pin 6
+#define CHAR2a 7 // LCD Pin 7
+#define CHAR2b 8 // LCD Pin 8
+#define CHAR3a 12 // LCD Pin 9
+#define CHAR3b 26 // LCD Pin 10
+#define CHAR4a 10 // LCD Pin 11
+#define CHAR4b 11 // LCD Pin 12
+#define CHARCOM0 51 // LCD Pin 1
+#define CHARCOM1 52 // LCD Pin 2
+#define CHARCOM2 19 // LCD Pin 3
+#define CHARCOM3 16 // LCD Pin 4
#endif
@@ -106,9 +91,6 @@
#define FAULTD_BP_LO 110
#define FAULTD_TIME 6
-extern const uint8_t WF_ORDERING_TABLE[]; // Logical Front plane N to LCD_WFx
-//extern const char ASCII_TO_WF_CODIFICATION_TABLE[]; // ASCII to 7x5 Dot Matrix
-
-#endif /* __FRDM_S401_H_ */
+extern const uint8_t WF_ORDERING_TABLE[]; // Logical Front plane N to LCD_WFx
--- a/LCDconfig.h Mon Jan 20 21:08:32 2014 +0000
+++ b/LCDconfig.h Mon Jan 27 21:57:38 2014 +0000
@@ -1,21 +1,18 @@
-#ifndef __LCDConfig_H_
-#define __LCDConfig_H_
-
-#include "FRDM-s401.h" // 4x7 segdisplay
+#include "FRDM-s401.h" // 4x7 segdisplay
#if 1 // VREF to VLL1
/* Following configuration is used for LCD default initialization */
-#define _LCDRVEN (1) //
-#define _LCDRVTRIM (8) // CPSEL = 1 0 -- 8000 pf 1 -- 6000 pf 2 -- 4000 pf 3 -- 2000 pf
-#define _LCDCPSEL (1) // charge pump select 0 or 1
-#define _LCDLOADADJUST (3) // CPSEL = 1 0 -- 8000 pf 1 -- 6000 pf 2 -- 4000 pf 3 -- 2000 pf
-#define _LCDALTDIV (0) // CPSEL = 1 0 -- 8000 pf 1 -- 6000 pf 2 -- 4000 pf 3 -- 2000 pf
+#define _LCDRVEN (1) //
+#define _LCDRVTRIM (8) // CPSEL = 1 0 -- 8000 pf 1 -- 6000 pf 2 -- 4000 pf 3 -- 2000 pf
+#define _LCDCPSEL (1) // charge pump select 0 or 1
+#define _LCDLOADADJUST (3) // CPSEL = 1 0 -- 8000 pf 1 -- 6000 pf 2 -- 4000 pf 3 -- 2000 pf
+#define _LCDALTDIV (0) // CPSEL = 1 0 -- 8000 pf 1 -- 6000 pf 2 -- 4000 pf 3 -- 2000 pf
#define _LCDALRCLKSOURCE (0) // 0 -- External clock 1 -- Alternate clock
#define _LCDCLKPSL (0) // Clock divider to generate the LCD Waveforms
#define _LCDSUPPLY (1)
-#define _LCDHREF (0) // 0 or 1
+#define _LCDHREF (0) // 0 or 1
#define _LCDCLKSOURCE (1) // 0 -- External clock 1 -- Alternate clock
#define _LCDLCK (1) //Any number between 0 and 7
#define _LCDBLINKRATE (3) //Any number between 0 and 7
@@ -25,16 +22,16 @@
/* Following configuration is used for LCD default initialization */
#define _LCDCLKSOURCE (1) // 0 -- External clock 1 -- Alternate clock
#define _LCDALRCLKSOURCE (0) // 0 -- External clock 1 -- Alternate clock
-#define _LCDCLKPSL (0) // Clock divider to generate the LCD Waveforms
+#define _LCDCLKPSL (0) // Clock divider to generate the LCD Waveforms
#define _LCDSUPPLY (0)
-#define _LCDLOADADJUST (3) // CPSEL = 1 0 -- 8000 pf 1 -- 6000 pf 2 -- 4000 pf 3 -- 2000 pf
-#define _LCDALTDIV (0) // CPSEL = 1 0 -- 8000 pf 1 -- 6000 pf 2 -- 4000 pf 3 -- 2000 pf
-#define _LCDRVTRIM (0) // CPSEL = 1 0 -- 8000 pf 1 -- 6000 pf 2 -- 4000 pf 3 -- 2000 pf
-#define _LCDHREF (0) // 0 or 1
-#define _LCDCPSEL (1) // 0 or 1
-#define _LCDRVEN (0) //
-#define _LCDBLINKRATE (3) //Any number between 0 and 7
-#define _LCDLCK (0) //Any number between 0 and 7
+#define _LCDLOADADJUST (3) // CPSEL = 1 0 -- 8000 pf 1 -- 6000 pf 2 -- 4000 pf 3 -- 2000 pf
+#define _LCDALTDIV (0) // CPSEL = 1 0 -- 8000 pf 1 -- 6000 pf 2 -- 4000 pf 3 -- 2000 pf
+#define _LCDRVTRIM (0) // CPSEL = 1 0 -- 8000 pf 1 -- 6000 pf 2 -- 4000 pf 3 -- 2000 pf
+#define _LCDHREF (0) // 0 or 1
+#define _LCDCPSEL (1) // 0 or 1
+#define _LCDRVEN (0) //
+#define _LCDBLINKRATE (3) // Any number between 0 and 7
+#define _LCDLCK (0) // Any number between 0 and 7
#endif
@@ -43,43 +40,42 @@
/*~|~|~|~|~|~|~|~|~|~|~|~|~|~ LCD Control Register 0 ~|~|~|~|~|~|~|~|~|~|~|~|~*/
/*~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|*/
-#define _LCDINTENABLE (1)
+#define _LCDINTENABLE (1)
/*~|~|~|~|~|~|~|~|~|~|~|~|~|~ LCD Control Register 1 ~|~|~|~|~|~|~|~|~|~|~|~|~|*/
/*~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|*/
-#define _LCDFRAMEINTERRUPT (0) //0 Disable Frame Frequency Interrupt
- //1 Enable an LCD interrupt that coincides with the LCD frame frequency
-#define _LCDFULLCPLDIRIVE (0) // 0 GPIO shared with the LCD. Inputs levels and internal pullup reference to VDD
- // 1 If VSUPPLY=11and RVEN=0. Inputs levels and internal pullup reference to VLL3
-#define _LCDWAITMODE (0) // 0 Allows the LCD driver and charge pump to continue running during wait mode
- // 1 Disable the LCD when the MCU goes into wait mode
+#define _LCDFRAMEINTERRUPT (0) //0 Disable Frame Frequency Interrupt
+ //1 Enable an LCD interrupt that coincides with the LCD frame frequency
+#define _LCDFULLCPLDIRIVE (0) // 0 GPIO shared with the LCD. Inputs levels and internal pullup reference to VDD
+ // 1 If VSUPPLY=11and RVEN=0. Inputs levels and internal pullup reference to VLL3
+#define _LCDWAITMODE (0) // 0 Allows the LCD driver and charge pump to continue running during wait mode
+ // 1 Disable the LCD when the MCU goes into wait mode
#define _LCDSTOPMODE (0) // 0 Allows the LCD driver and charge pump to continue running during stop2 or stop3
-
- // 1 Disable the LCD when and charge pump when the MCU goes into stop2 or stop3
+ // 1 Disable the LCD when and charge pump when the MCU goes into stop2 or stop3
/*~|~|~|~|~|~|~|~|~|~|~|~|~|~ LCD Voltage Supply Register ~|~|~|~|~|~|~|~|~|~|~|~*/
/*~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|*/
-#define _LCDHIGHREF (0) //0 Divide input VIREG=1.0v
- //1 Do not divide the input VIREG=1.67v
-#define _LCDBBYPASS (0) //Determines whether the internal LCD op amp buffer is bypassed
- //0 Buffered mode
- //1 Unbuffered mode
+#define _LCDHIGHREF (0) //0 Divide input VIREG=1.0v
+ //1 Do not divide the input VIREG=1.67v
+#define _LCDBBYPASS (0) //Determines whether the internal LCD op amp buffer is bypassed
+ //0 Buffered mode
+ //1 Unbuffered mode
/*~|~|~|~|~|~|~|~|~|~|~|~|~|~ LCD Regulated Voltage Control |~|~|~|~|~|~|~|~|~|~*/
/*~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|*/
-#define _LCDCONTRAST (1) //Contrast by software 0 -- Disable 1-- Enable
-#define _LVLCONTRAST (0) //Any number between 0 and 15, if the number is bigger the glass get darker
+#define _LCDCONTRAST (1) //Contrast by software 0 -- Disable 1-- Enable
+#define _LVLCONTRAST (0) //Any number between 0 and 15, if the number is bigger the glass gets darker
/*~|~|~|~|~|~|~|~|~|~|~|~|~|~ LCD Blink Control Register ~|~|~|~|~|~|~|~|~|~|~|~*/
/*~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|*/
-#define _LCDBLINKCONTROL (0) //0 Disable blink mode
- //1 Enable blink mode
-#define _LCDALTMODE (0) //0 Normal display
- //1 Alternate display for 4 backplanes or less the LCD backplane sequencer changes to otuput an alternate display
-#define _LCDBLANKDISP (0) //0 Do not blank display
- //1 Blank display if you put it in 0 the text before blank is manteined
-#define _LCDBLINKMODE (0) //0 Display blank during the blink period
- //1 Display alternate displat during blink period (Ignored if duty is 5 or greater)
+#define _LCDBLINKCONTROL (1) //0 Disable blink mode
+ //1 Enable blink mode
+#define _LCDALTMODE (0) //0 Normal display
+ //1 Alternate display for 4 backplanes or less the LCD backplane sequencer changes to otuput an alternate display
+#define _LCDBLANKDISP (0) //0 Do not blank display
+ //1 Blank display if you put it in 0 the text before blank is manteined
+#define _LCDBLINKMODE (0) //0 Display blank during the blink period
+ //1 Display alternate displat during blink period (Ignored if duty is 5 or greater)
//Calculated values
@@ -87,9 +83,7 @@
#define _LCDDUTY (_LCDBACKPLANES-1) //Any number between 0 and 7
#define LCD_WF_BASE LCD->WF8B[0]
-// General definitions used by the LCD library
-#define SymbolON(LCDn,bit) *((uint8 *)&LCD_WF_BASE + LCDn) |= (1<<(bit))
-#define SymbolOFF(LCDn,bit) *((uint8 *)&LCD_WF_BASE + LCDn) &= ~(1<<(bit))
+// General definitions used by the LCD library
#define LCD_WF(x) *((uint8 *)&LCD_WF_BASE + x)
/*LCD Fault Detections Consts*/
@@ -185,5 +179,5 @@
#define mBIT62 1073741824
#define mBIT63 2147483648
-#endif /* __LCDConfig_H_ */
+
--- a/SLCD.cpp Mon Jan 20 21:08:32 2014 +0000
+++ b/SLCD.cpp Mon Jan 27 21:57:38 2014 +0000
@@ -63,7 +63,7 @@
( SEGD+ SEGE+!SEGF+!SEGG) , ( SEGC+ SEGB+!SEGA) ,//Char = J, offset=104
(!SEGD+ SEGE+ SEGF+ SEGG) , ( SEGC+!SEGB+ SEGA) ,//Char = K, offset=108
( SEGD+ SEGE+ SEGF+!SEGG) , (!SEGC+!SEGB+!SEGA) ,//Char = L, offset=112
-(!SEGD+ SEGE+ SEGF+!SEGG) , ( SEGC+ SEGB+!SEGA) ,//Char = M, offset=116
+(!SEGD+ SEGE+ SEGF+!SEGG) , ( SEGC+ SEGB+ SEGA) ,//Char = M, offset=116
(!SEGD+ SEGE+!SEGF+ SEGG) , ( SEGC+!SEGB+!SEGA) ,//Char = N, offset=120
( SEGD+ SEGE+!SEGF+ SEGG) , ( SEGC+!SEGB+!SEGA) ,//Char = O, offset=124
(!SEGD+ SEGE+ SEGF+ SEGG) , (!SEGC+ SEGB+ SEGA) ,//Char = P, offset=128
@@ -87,33 +87,23 @@
SLCD::SLCD() {
init();
- bLCD_CharPosition = 0;
-}
-
-int SLCD::_putc(int c) {
- LCD_Write_Char(c);
- return 0;
+ CharPosition = 0;
}
void SLCD::init(){
SIM->SCGC5 |= SIM_SCGC5_SLCD_MASK | SIM_SCGC5_PORTB_MASK | SIM_SCGC5_PORTC_MASK | SIM_SCGC5_PORTD_MASK | SIM_SCGC5_PORTE_MASK;
- // configure pins for LCD operation
+ // configure pins for LCD operation
PORTC->PCR[20] = 0x00000000; //VLL2
PORTC->PCR[21] = 0x00000000; //VLL1
PORTC->PCR[22] = 0x00000000; //VCAP2
- PORTC->PCR[23] = 0x00000000; //VCAP1
-
-
-
- // Enable IRCLK
+ PORTC->PCR[23] = 0x00000000; //VCAP1
+ // Enable IRCLK
MCG->C1 = MCG_C1_IRCLKEN_MASK | MCG_C1_IREFSTEN_MASK;
- MCG->C2 &= ~MCG_C2_IRCS_MASK ; //0 32KHZ internal reference clock; 1= 4MHz irc
-
+ MCG->C2 &= ~MCG_C2_IRCS_MASK ; //0 32KHZ internal reference clock; 1= 4MHz irc
LCD->GCR = 0x0;
- LCD->AR = 0x0;
-
-// LCD configurartion according to */
+ LCD->AR = 0x0;
+ // LCD configurartion
LCD->GCR = ( LCD_GCR_RVEN_MASK*_LCDRVEN
| LCD_GCR_RVTRIM(_LCDRVTRIM) //0-15
| LCD_GCR_CPSEL_MASK*_LCDCPSEL
@@ -126,28 +116,18 @@
|!LCD_GCR_LCDEN_MASK //WILL BE ENABLE ON SUBSEQUENT STEP
| LCD_GCR_SOURCE_MASK*_LCDCLKSOURCE
| LCD_GCR_ALTSOURCE_MASK*_LCDALRCLKSOURCE
- | LCD_GCR_LCLK(_LCDLCK) //0-7
+ | LCD_GCR_LCLK(_LCDLCK) //0-7
| LCD_GCR_DUTY(_LCDDUTY) //0-7
);
-
- EnablePins(); // Enable LCD pins and Configure BackPlanes
- LCD->GCR |= LCD_GCR_LCDEN_MASK;
-}
-
-void SLCD::EnablePins (void)
- {
uint8_t i;
uint32_t *p_pen;
uint8_t pen_offset; // 0 or 1
uint8_t pen_bit; // 0 to 31
-
LCD->PEN[0] = 0x0;
LCD->PEN[1] = 0x0;
LCD->BPEN[0] = 0x0;
- LCD->BPEN[1] = 0x0;
-
+ LCD->BPEN[1] = 0x0;
p_pen = (uint32_t *)&LCD->PEN[0];
-
for (i=0;i<_LCDUSEDPINS;i++)
{
pen_offset = WF_ORDERING_TABLE[i]/32;
@@ -158,11 +138,16 @@
p_pen[pen_offset+2] |= 1 << pen_bit; // Enable BPEN
LCD->WF8B[(uint8_t)WF_ORDERING_TABLE[i]] = 1 << (i - _LCDFRONTPLANES); // fill with 0x01, 0x02, etc
}
- }
- }
+ }
+ LCD->GCR |= LCD_GCR_LCDEN_MASK;
+}
+int SLCD::_putc(int c) {
+ Write_Char(c);
+ return 0;
+}
-void SLCD::LCD_Write_Char (char lbValue) {
+void SLCD::Write_Char (char lbValue) {
uint8_t char_val;
uint8_t temp;
uint8_t *lbpLCDWF;
@@ -170,9 +155,8 @@
uint16_t arrayOffset;
uint8_t position;
- if (bLCD_CharPosition >= _CHARNUM)
- bLCD_CharPosition = 0;
-
+ if (CharPosition >= _CHARNUM)
+ CharPosition = 0;
lbpLCDWF = (uint8_t *)&LCD->WF8B[0];
/* only ascii character if value not writeable write as @ */
if (lbValue>='a' && lbValue<='z') {
@@ -186,7 +170,7 @@
// ensure bLCD position is in valid limit
lbCounter = 0; //number of writings to complete one char
while (lbCounter<_CHAR_SIZE) {
- position = (bLCD_CharPosition) *_LCDTYPE + lbCounter;
+ position = (CharPosition) *_LCDTYPE + lbCounter;
temp=0;
if (lbCounter==1) {
temp = lbpLCDWF[WF_ORDERING_TABLE[position]] & 0x01;//bit 0 has the special symbol information
@@ -195,33 +179,22 @@
lbpLCDWF[WF_ORDERING_TABLE[position]] = char_val | temp;
// if (char_val==0) lbCounter = _CHAR_SIZE; //end of this character
lbCounter++;
- }
-
- bLCD_CharPosition++;
+ }
+ CharPosition++;
}
-/* Fill Backplanes with normal mask for 0x01, 0x02, according to BP_ORDERING_TABLE;*/
-void SLCD::SetBackplanes(void)
+void SLCD::Home (void)
{
- uint8_t i;
- for (i=0;i<_LCDBACKPLANES;i++)
- {
- LCD->WF8B[(uint8_t)WF_ORDERING_TABLE[i+_LCDFRONTPLANES]] = 0x01<<i;
- }
- }
-
-void SLCD::LCD_Home (void)
- {
- bLCD_CharPosition = 0;
+ CharPosition = 0;
}
-void SLCD::LCD_Contrast (uint8_t lbContrast)
-{
+void SLCD::Contrast (uint8_t lbContrast)
+{
lbContrast &= 0x0F; //Forced to the only values accepted
LCD->GCR |= LCD_GCR_RVTRIM(lbContrast);
}
-void SLCD::LCD_All_Segments_ON (void)
+void SLCD::All_Segments (int mode)
{
uint8_t lbTotalBytes = _CHARNUM * _LCDTYPE;
uint8_t lbCounter=0;
@@ -230,77 +203,41 @@
lbpLCDWF = (uint8_t *)&LCD->WF8B[0];
while (lbCounter < lbTotalBytes)
{
- lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[lbCounter++]]=_ALLON;
+ if (mode==1){lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[lbCounter++]]=_ALLON;}
+ else {lbpLCDWF[WF_ORDERING_TABLE[lbCounter++]]=0;}
}
}
-void SLCD::LCD_All_Segments_OFF (void)
-{
- uint8_t lbTotalBytes = _CHARNUM * _LCDTYPE;
- uint8_t lbCounter=0;
- uint8_t *lbpLCDWF;
-
- lbpLCDWF = (uint8_t *)&LCD->WF8B[0];
- while (lbCounter < lbTotalBytes)
- {
- lbpLCDWF[WF_ORDERING_TABLE[lbCounter++]]=0;
- }
-}
-
-void SLCD::DP1_ON (void)
+void SLCD::DP1 (int mode)
{
uint8_t *lbpLCDWF;
lbpLCDWF = (uint8_t *)&LCD->WF8B[0];
- lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[1]]=1;
+ if (mode==1){lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[1]]|=1;}
+ else {lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[1]]&=~1;}
}
-
-void SLCD::DP1_OFF (void)
-{
- uint8_t *lbpLCDWF;
- lbpLCDWF = (uint8_t *)&LCD->WF8B[0];
- lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[1]]=14;
-}
-
-void SLCD::DP2_ON (void)
+
+void SLCD::DP2 (int mode)
{
uint8_t *lbpLCDWF;
lbpLCDWF = (uint8_t *)&LCD->WF8B[0];
- lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[3]]=1;
-}
+ if (mode==1){lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[3]]|=1;}
+ else {lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[3]]&=~1;}
+}
-void SLCD::DP2_OFF (void)
-{
- uint8_t *lbpLCDWF;
- lbpLCDWF = (uint8_t *)&LCD->WF8B[0];
- lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[3]]=14;
-}
-
-void SLCD::DP3_ON (void)
-{
- uint8_t *lbpLCDWF;
- lbpLCDWF = (uint8_t *)&LCD->WF8B[0];
- lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[5]]=1;
-}
-
-void SLCD::DP3_OFF (void)
+void SLCD::DP3 (int mode)
{
uint8_t *lbpLCDWF;
- lbpLCDWF = (uint8_t *)&LCD->WF8B[0];
- lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[5]]=14;
+ lbpLCDWF = (uint8_t *)&LCD->WF8B[0];
+ if (mode==1){lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[5]]|=1;}
+ else {lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[5]]&=~1;}
}
-
-void SLCD::COLON_ON (void)
+
+void SLCD::Colon (int mode)
{
uint8_t *lbpLCDWF;
- lbpLCDWF = (uint8_t *)&LCD->WF8B[0];
- lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[7]]=1;
+ lbpLCDWF = (uint8_t *)&LCD->WF8B[0];
+ if (mode==1){lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[7]]|=1;}
+ else {lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[7]]&=~1;}
}
+
-void SLCD::COLON_OFF (void)
-{
-
- uint8_t *lbpLCDWF;
- lbpLCDWF = (uint8_t *)&LCD->WF8B[0];
- lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[7]]=14;
-}
-
--- a/SLCD.h Mon Jan 20 21:08:32 2014 +0000
+++ b/SLCD.h Mon Jan 27 21:57:38 2014 +0000
@@ -1,36 +1,44 @@
-#ifndef SLCD_H
-#define SLCD_H
-
#include "mbed.h"
+/* ------ sample usage------
+
+ #include "mbed.h"
+ #include "SLCD.h"
+
+ SLCD slcd;
+
+ main()
+ {
+ slcd.printf("1234"); // standard printf function, only charaters in ASCII_TO_WF_CODIFICATION_TABLE will display
+ slcd.putc("A"); // prints a single character
+ slcd.Write_Char('A'); // prints a single character
+ slcd.All_Segments(y); // y=1 for ALL segments on, 0 for ALL segments off
+ slcd.DPx(y); // x=DP1 to DP3, y=1 for on 0 for off
+ slcd.Colon(y); // y=1 for on, 0 for off
+ slcd.CharPosition=x; // x=0 to 3, 0 is start position
+ slcd.Home(); // sets next charater to posistion 0 (start)
+ slcd.Contrast (x); // set contrast x=0 - 15, 0 lightest, 15 darkest
+ }
+*/
+
class SLCD : public Stream {
public:
SLCD();
void init();
- void EnablePins();
- void LCD_Write_Char(char lbValue);
- void SetBackplanes(void); // reconfigure COM to default values
- void LCD_Home (void);
- void LCD_Contrast (uint8_t lbContrast);
- void LCD_All_Segments_ON (void);
- void LCD_All_Segments_OFF (void);
- void DP1_ON (void);
- void DP1_OFF (void);
- void DP2_ON (void);
- void DP2_OFF (void);
- void DP3_ON (void);
- void DP3_OFF (void);
- void COLON_ON (void);
- void COLON_OFF (void);
-
- uint8_t lcd_alternate_mode;
- uint8_t bLCD_CharPosition;
+ void Write_Char(char lbValue);
+ void Home (void);
+ void Contrast (uint8_t lbContrast);
+ void All_Segments (int);
+ void DP1 (int);
+ void DP2 (int);
+ void DP3 (int);
+ void Colon (int);
+ uint8_t CharPosition;
virtual int _putc(int c);
virtual int _getc() {
return 0;
}
};
-#endif
\ No newline at end of file