Full six channel cap sensor input and output CDG KL46Z control to Raspberry Pi NMHU Elements of Exhibit Design Fall 2014
Fork of CapKey_46_v2_button_osmon by
Revision 4:34ca86236686, committed 2014-11-13
- Comitter:
- scohennm
- Date:
- Thu Nov 13 03:24:24 2014 +0000
- Parent:
- 3:ee958939c828
- Commit message:
- Full six channel cap sensor input and output CDG KL46Z control to Raspberry Pi
Changed in this revision
cdg_main.cpp | Show annotated file Show diff for this revision Revisions of this file |
mbed.bld | Show annotated file Show diff for this revision Revisions of this file |
--- a/cdg_main.cpp Tue Nov 04 05:27:58 2014 +0000 +++ b/cdg_main.cpp Thu Nov 13 03:24:24 2014 +0000 @@ -5,9 +5,9 @@ // Modified for mbet KL46Z 10/07/2014 // Four inputs and Four relays // Changed to simulate capkeys with the KL on board buttons -#define PROGNAME "DG Cap Key v1.1\r\n" +#define PROGNAME "DG Cap Key v2.1\r\n" #define KEYHIT "SND" -#define SERIAL_SPEED 9600 +#define IDLEMESS "IDLE" #define HIGH 1 #define LOW 0 #define RESET_DELAY 1200 @@ -19,20 +19,25 @@ #define NUMREL 6 // really just the number of outputs #define LCDDELAY 0.200 #define COUNTERLIMIT 300 - +#define TESTCHANNEL 0 +#define LEDDELAY 0.75 +#define CHNLLCDPRINT "CH-%1d" +#define RASPIOUTDBG "PIOUT = %d \n\r" DigitalOut Relays[NUMREL] = {D10,D11,D12,D13,PTC13,PTC16}; // corresponds to touches 1,2,3,4 -//DigitalIn capKeys[NUMREL] = {D2,D4,D6,D8}; +DigitalIn capKeys[NUMREL] = {D2,D4,D6,D8,PTC6,PTC7}; DigitalOut capRST[NUMREL] = {D3,D5,D7,D9,PTC10,PTC11}; -DigitalIn sendKey(PTC3); // on board buttons just use 1 for test +//DigitalIn sendKey(PTC3); // on board buttons just use 1 for test +DigitalOut REDLed(LED_RED); // red led +DigitalOut GREENLed(PTD5); // green led - +Ticker ledBlink; // timinginterrupt for RED led Timer millis; Serial pc(USBTX, USBRX); SLCD slcd; //define LCD display -InterruptIn chanButton(PTC12); +//InterruptIn chanButton(PTC12); int channelSelect=0; int channelDisplay = 1; @@ -41,6 +46,13 @@ long relayTimeout; long capKeyTimeout; int LCDCounter = 0; +int outState = false; + +void LEDBlinker(){ // RED LED interrupt + outState = !outState; + REDLed.write(outState); + GREENLed.write(!outState); +} void getChannel() { // button interrupt channelSelect = (channelSelect + 1) % NUMREL; @@ -59,46 +71,56 @@ int i; int buttonVal = 0; - char lcdData[10]; //buffer needs places dor decimal pt and colon - + char lcdData[10]; //buffer needs places for decimal pt and colon int OKtoRead = true; - chanButton.fall(&getChannel); - - // initialize the LED pin as an output: + ledBlink.attach(&LEDBlinker, LEDDELAY);// Alive LED millis.start(); millis.reset(); - pc.printf(PROGNAME); + pc.printf(PROGNAME); + sprintf (lcdData,IDLEMESS); //Show that things are on + LCDMess(lcdData, LCDDELAY); for (i=0; i<NUMREL; i++){ Relays[i].write(RELAY_OFF); capRST[i].write(HIGH); + capKeys[i].mode(PullDown); // click out the pull-up resistor looks like it needs a pulldown } while (true) { // Show active channel - sprintf (lcdData,"CH-%1d",channelDisplay); - LCDMess(lcdData, LCDDELAY); + // read the state of the pushbutton value: if(OKtoRead) { - buttonVal = !sendKey.read() ; // on board buttons just use 1 + for (i=TESTCHANNEL; i<NUMREL; i++){ + if (capKeys[i] == HIGH) { + channelSelect = i; + channelDisplay = channelSelect +1; + buttonVal = true; // Got a touch + break; + } + } + //buttonVal = !sendKey.read() ; // on board buttons just use 1 if (buttonVal){ - sprintf (lcdData,"SND%1d",channelDisplay); - LCDMess(lcdData, LCDDELAY); Relays[channelSelect].write(RELAY_ON); capRST[channelSelect].write(LOW); //reset the cap key - pc.printf("Relay = %d \n\r", channelSelect); + pc.printf(RASPIOUTDBG, channelSelect); millis.reset(); relayTimeout = RESET_DELAY; OKtoRead = false; + buttonVal = false; + sprintf (lcdData,CHNLLCDPRINT,channelDisplay); + LCDMess(lcdData, LCDDELAY); } }//end OKtoRead if (millis.read_ms() > relayTimeout) { OKtoRead = true; + sprintf (lcdData,IDLEMESS); + LCDMess(IDLEMESS, LCDDELAY); for (i=0; i<NUMREL; i++){ Relays[i].write(RELAY_OFF); capRST[i].write(HIGH);
--- a/mbed.bld Tue Nov 04 05:27:58 2014 +0000 +++ b/mbed.bld Thu Nov 13 03:24:24 2014 +0000 @@ -1,1 +1,1 @@ -http://mbed.org/users/mbed_official/code/mbed/builds/552587b429a1 \ No newline at end of file +http://mbed.org/users/mbed_official/code/mbed/builds/031413cf7a89 \ No newline at end of file