schneider françois
Programme et Driver for MIKROE-495 REV 2.
Fork of
SPI_TFTx2_ILI9341
by 
Tick Tock
Ce programme est issu du projet https://developer.mbed.org/users/TickTock/code/CANary/ Merci
Revision 11:69ce6c784cae, committed 2016-03-15
- Comitter:
- schnf30
- Date:
- Tue Mar 15 14:55:32 2016 +0000
- Parent:
- 10:aca12a61d2b1
- Commit message:
- Driver et programme exemple pour Carte MIKROE-495 REV 2
Changed in this revision
diff -r aca12a61d2b1 -r 69ce6c784cae SPI_TFTx2.cpp
--- a/SPI_TFTx2.cpp Sun May 18 12:45:24 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,1277 +0,0 @@
-/* mbed library for 240*320 pixel display TFT based on HX8347D LCD Controller
- * Copyright (c) 2011 Peter Drescher - DC2PD
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-
-// fix bmp padding for Bitmap function
-// speed up pixel
-// 30.12.11 fix cls
-// 11.03.12 use DMA to speed up
-// 15.03.12 use SSEL for TFT CS to enable DMA Register writes
-// 06.04.12 fix SSEL CS problem
-// 06.04.12 use direct access to the spi register to speed up the library.
-// 11.09.12 switch back to using io pin as cs to avoid problems with SSEL CS.
-// 21.09.12 fix Bug in BMP_16
-// 11.10.12 patch from Hans Bergles to get SPI1 working again
-// 03.02.13 add a switch to switch off DMA use for LPC11U24
-
-#include "SPI_TFTx2.h"
-#include "mbed.h"
-
-#define BPP 16 // Bits per pixel
-
-#if defined TARGET_LPC1768
-#define USE_DMA
-#endif
-
-#if defined NO_DMA
-#undef USE_DMA
-#endif
-
-//extern Serial pc;
-//extern DigitalOut xx; // debug !!
-
-SPI_TFTx2::SPI_TFTx2(PinName mosi, PinName miso, PinName sclk, PinName cs0, PinName cs1, PinName reset, const char *name)
- : _spi(mosi, miso, sclk), _cs0(cs0), _cs1(cs1), _reset(reset), GraphicsDisplay(name)
-{
- orientation = 0;
- char_x = 0;
- _cs0 = 1;
- _cs1 = 1;
-
- if (mosi == p11 || mosi == P0_18) spi_port = 0; // we must know the used SPI port to setup the DMA
- else spi_port = 1;
- seldisp = 2;
- tft_reset();
-}
-
-int SPI_TFTx2::width()
-{
- if (orientation == 0 || orientation == 2) return 240;
- else return 320;
-}
-
-
-int SPI_TFTx2::height()
-{
- if (orientation == 0 || orientation == 2) return 320;
- else return 240;
-}
-
-
-void SPI_TFTx2::set_orientation(unsigned int o)
-{
- orientation = o;
- switch (orientation) {
- case 0:
- wr_reg(0x16, 0x08);
- break;
- case 1:
- wr_reg(0x16, 0x68);
- break;
- case 2:
- wr_reg(0x16, 0xC8);
- break;
- case 3:
- wr_reg(0x16, 0xA8);
- break;
- }
- WindowMax();
-}
-
-void SPI_TFTx2::set_display(unsigned int o)
-{
- seldisp = o;
-}
-
-// write command to tft register
-
-void SPI_TFTx2::wr_cmd(unsigned char cmd)
-{
- unsigned short spi_d;
- spi_d = 0x7000 | cmd ;
-
- if (seldisp == 0) {
- _cs0 = 0;
- _cs1 = 1;
- } else if (seldisp == 1) {
- _cs0 = 1;
- _cs1 = 0;
- } else {
- _cs0 = 0;
- _cs1 = 0;
- }
-
- if (spi_port == 0) { // TFT on SSP0
- LPC_SSP0->DR = spi_d;
- // we have to wait for SPI IDLE to set CS back to high
- do {
- } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI0 not idle
- } else {
- LPC_SSP1->DR = spi_d;
- do {
- } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI1 not idle
- }
- _cs0 = 1;
- _cs1 = 1;
-}
-
-
-
-void SPI_TFTx2::wr_dat(unsigned char dat)
-{
- unsigned short spi_d;
- spi_d = 0x7200 | dat;
- if (seldisp == 0) {
- _cs0 = 0;
- _cs1 = 1;
- } else if (seldisp == 1) {
- _cs0 = 1;
- _cs1 = 0;
- } else {
- _cs0 = 0;
- _cs1 = 0;
- }
-
- if (spi_port == 0) { // TFT on SSP0
- LPC_SSP0->DR = spi_d;
- // we have to wait for SPI IDLE to set CS back to high
- do {
- } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI0 not idle
- } else {
- LPC_SSP1->DR = spi_d;
- do {
- } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI1 not idle
- }
- _cs0 = 1;
- _cs1 = 1;
-}
-
-
-
-// the HX8347-D controller do not use the MISO (SDO) Signal.
-// This is a bug - ?
-// A read will return 0 at the moment
-
-unsigned short SPI_TFTx2::rd_dat (void)
-{
- unsigned short val = 0;
-
- //val = _spi.write(0x73ff); /* Dummy read 1 */
- //val = _spi.write(0x0000); /* Read D8..D15 */
- return (val);
-}
-
-void SPI_TFTx2::wr_reg (unsigned char reg, unsigned char val)
-{
- wr_cmd(reg);
- wr_dat(val);
-}
-
-unsigned short SPI_TFTx2::rd_reg (unsigned char reg)
-{
- wr_cmd(reg);
- return(rd_dat());
-}
-
-void SPI_TFTx2::tft_reset()
-{
- //static unsigned short driverCode;
- _spi.format(16,3); // 16 bit spi mode 3
- _spi.frequency(48000000); // 48 Mhz SPI clock
- _cs0 = 1; // cs high
- _cs1 = 1; // cs high
- _reset = 0; // display reset
-
- wait_us(50);
- _reset = 1; // end reset
- wait_ms(5);
-
- /* Start Initial Sequence ----------------------------------------------------*/
- wr_reg(0xEA, 0x00); /* Reset Power Control 1 */
- wr_reg(0xEB, 0x20); /* Power Control 2 */
- wr_reg(0xEC, 0x0C); /* Power Control 3 */
- wr_reg(0xED, 0xC4); /* Power Control 4 */
- wr_reg(0xE8, 0x40); /* Source OPON_N */
- wr_reg(0xE9, 0x38); /* Source OPON_I */
- wr_reg(0xF1, 0x01); /* */
- wr_reg(0xF2, 0x10); /* */
- wr_reg(0x27, 0xA3); /* Display Control 2 */
-
- /* Power On sequence ---------------------------------------------------------*/
- wr_reg(0x1B, 0x1B); /* Power Control 2 */
- wr_reg(0x1A, 0x01); /* Power Control 1 */
- wr_reg(0x24, 0x2F); /* Vcom Control 2 */
- wr_reg(0x25, 0x57); /* Vcom Control 3 */
- wr_reg(0x23, 0x8D); /* Vcom Control 1 */
-
- /* Gamma settings -----------------------------------------------------------*/
- wr_reg(0x40,0x00); //
- wr_reg(0x41,0x00); //
- wr_reg(0x42,0x01); //
- wr_reg(0x43,0x13); //
- wr_reg(0x44,0x10); //
- wr_reg(0x45,0x26); //
- wr_reg(0x46,0x08); //
- wr_reg(0x47,0x51); //
- wr_reg(0x48,0x02); //
- wr_reg(0x49,0x12); //
- wr_reg(0x4A,0x18); //
- wr_reg(0x4B,0x19); //
- wr_reg(0x4C,0x14); //
- wr_reg(0x50,0x19); //
- wr_reg(0x51,0x2F); //
- wr_reg(0x52,0x2C); //
- wr_reg(0x53,0x3E); //
- wr_reg(0x54,0x3F); //
- wr_reg(0x55,0x3F); //
- wr_reg(0x56,0x2E); //
- wr_reg(0x57,0x77); //
- wr_reg(0x58,0x0B); //
- wr_reg(0x59,0x06); //
- wr_reg(0x5A,0x07); //
- wr_reg(0x5B,0x0D); //
- wr_reg(0x5C,0x1D); //
- wr_reg(0x5D,0xCC); //
-
- /* Power + Osc ---------------------------------------------------------------*/
- wr_reg(0x18, 0x0036); /* OSC Control 1 */
- wr_reg(0x19, 0x0001); /* OSC Control 2 */
- wr_reg(0x01, 0x0000); /* Display Mode Control */
- wr_reg(0x1F, 0x0088); /* Power Control 6 */
- wait_ms(5); /* Delay 5 ms */
- wr_reg(0x1F, 0x0080); /* Power Control 6 */
- wait_ms(5); /* Delay 5 ms */
- wr_reg(0x1F, 0x0090); /* Power Control 6 */
- wait_ms(5); /* Delay 5 ms */
- wr_reg(0x1F, 0x00D0); /* Power Control 6 */
- wait_ms(5); /* Delay 5 ms */
-
- wr_reg(0x17, 0x0005); /* Colmod 16Bit/Pixel */
-
- wr_reg(0x36, 0x0000); /* Panel Characteristic */
- wr_reg(0x28, 0x0038); /* Display Control 3 */
- wait_ms(40);
- wr_reg(0x28, 0x003C); /* Display Control 3 */
- switch (orientation) {
- case 0:
- wr_reg(0x16, 0x0008);
- break;
- case 1:
- wr_reg(0x16, 0x0068);
- break;
- case 2:
- wr_reg(0x16, 0x00C8);
- break;
- case 3:
- wr_reg(0x16, 0x00A8);
- break;
- }
-#if defined USE_DMA
- // setup DMA channel 0
- // Power up the GPDMA.
- LPC_SC->PCONP |= (1UL << 29);
- LPC_GPDMA->DMACConfig = 1; // enable DMA controller
- // Reset the Interrupt status
- LPC_GPDMA->DMACIntTCClear = 0x1;
- LPC_GPDMA->DMACIntErrClr = 0x1;
- LPC_GPDMACH0->DMACCLLI = 0;
-#endif
-
- WindowMax ();
-}
-
-
-void SPI_TFTx2::pixel(int x, int y, int color)
-{
- unsigned char u,l;
- wr_reg(0x03, (x >> 0));
- wr_reg(0x02, (x >> 8));
- wr_reg(0x07, (y >> 0));
- wr_reg(0x06, (y >> 8));
- wr_cmd(0x22);
- u = color >> 8;
- l = color & 0xff;
- if (seldisp == 0) {
- _cs0 = 0;
- _cs1 = 1;
- } else if (seldisp == 1) {
- _cs0 = 1;
- _cs1 = 0;
- } else {
- _cs0 = 0;
- _cs1 = 0;
- }
- if (spi_port == 0) { // TFT on SSP0
- LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP0->DR = 0x72; // start Data
- LPC_SSP0->DR = u; // high byte
- LPC_SSP0->DR = l; // low byte
- LPC_SSP0->CR0 |= 0x08UL; // set back to 16 bit
- // we have to wait for SPI IDLE to set CS back to high
- do {
- } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI0 not idle
- } else {
- LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP1->DR = 0x72; // start Data
- LPC_SSP1->DR = u;
- LPC_SSP1->DR = l;
- LPC_SSP1->CR0 |= 0x08UL; // set back to 16 bit
- // we have to wait for SPI IDLE to set CS back to high
- do {
- } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI1 not idle
- }
- _cs0 = 1;
- _cs1 = 1;
-}
-
-
-void SPI_TFTx2::window (unsigned int x, unsigned int y, unsigned int w, unsigned int h)
-{
- wr_reg(0x03, x );
- wr_reg(0x02, (x >> 8));
- wr_reg(0x05, x+w-1 );
- wr_reg(0x04, (x+w-1 >> 8));
- wr_reg(0x07, y );
- wr_reg(0x06, ( y >> 8));
- wr_reg(0x09, ( y+h-1 ));
- wr_reg(0x08, ( y+h-1 >> 8));
-}
-
-
-void SPI_TFTx2::WindowMax (void)
-{
- window (0, 0, width(), height());
-}
-
-
-void SPI_TFTx2::cls (void)
-{
- int pixel = ( width() * height());
-#if defined USE_DMA
- int dma_count;
- int color = _background;
-#endif
- WindowMax();
- wr_cmd(0x22);
-
- // The SSEL signal is held low until the spi FIFO is emty.
- // We have to lower the SPI clock for the 8 bit start to get the spi running
- // until the next data word
-#if defined USE_DMA
- LPC_GPDMACH0->DMACCSrcAddr = (uint32_t)&color;
-#endif
- if (seldisp == 0) {
- _cs0 = 0;
- _cs1 = 1;
- } else if (seldisp == 1) {
- _cs0 = 1;
- _cs1 = 0;
- } else {
- _cs0 = 0;
- _cs1 = 0;
- }
- if (spi_port == 0) { // TFT on SSP0
-#if defined USE_DMA
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
- /* Enable SSP0 for DMA. */
- LPC_SSP0->DMACR = 0x2;
-#endif
- LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP0->DR = 0x72; // start byte
- LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
- } else {
-#if defined USE_DMA
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
- /* Enable SSP1 for DMA. */
- LPC_SSP1->DMACR = 0x2;
-#endif
- LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP1->DR = 0x72; // start Data
- LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
- }
-
-#if defined USE_DMA
- // start DMA
- do {
- if (pixel > 4095) {
- dma_count = 4095;
- pixel = pixel - 4095;
- } else {
- dma_count = pixel;
- pixel = 0;
- }
- LPC_GPDMA->DMACIntTCClear = 0x1;
- LPC_GPDMA->DMACIntErrClr = 0x1;
- LPC_GPDMACH0->DMACCControl = dma_count | (1UL << 18) | (1UL << 21) | (1UL << 31) ; // 16 bit transfer , no address increment, interrupt
- LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
- LPC_GPDMA->DMACSoftSReq = 0x1; // DMA request
-
- do {
- } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
-
- } while (pixel > 0);
- if (spi_port == 0) { // TFT on SSP0
- do {
- } while ((0x0010 & LPC_SSP0->SR) == 0x10); // SPI FIFO not empty
- /* disable SSP0 for DMA. */
- LPC_SSP0->DMACR = 0x0;
- } else {
- do {
- } while ((0x0010 & LPC_SSP1->SR) == 0x10); // SPI FIFO not empty
- /* disable SSP1 for DMA. */
- LPC_SSP1->DMACR = 0x0;
- }
-#else // no DMA
- unsigned int i;
- for (i = 0; i < ( width() * height()); i++)
- _spi.write(_background);
-#endif
- _cs0 = 1;
- _cs1 = 1;
-}
-
-void SPI_TFTx2::circle(int x0, int y0, int r, int color)
-{
-
- int draw_x0, draw_y0;
- int draw_x1, draw_y1;
- int draw_x2, draw_y2;
- int draw_x3, draw_y3;
- int draw_x4, draw_y4;
- int draw_x5, draw_y5;
- int draw_x6, draw_y6;
- int draw_x7, draw_y7;
- int xx, yy;
- int di;
- //WindowMax();
- if (r == 0) { /* no radius */
- return;
- }
-
- draw_x0 = draw_x1 = x0;
- draw_y0 = draw_y1 = y0 + r;
- if (draw_y0 < height()) {
- pixel(draw_x0, draw_y0, color); /* 90 degree */
- }
-
- draw_x2 = draw_x3 = x0;
- draw_y2 = draw_y3 = y0 - r;
- if (draw_y2 >= 0) {
- pixel(draw_x2, draw_y2, color); /* 270 degree */
- }
-
- draw_x4 = draw_x6 = x0 + r;
- draw_y4 = draw_y6 = y0;
- if (draw_x4 < width()) {
- pixel(draw_x4, draw_y4, color); /* 0 degree */
- }
-
- draw_x5 = draw_x7 = x0 - r;
- draw_y5 = draw_y7 = y0;
- if (draw_x5>=0) {
- pixel(draw_x5, draw_y5, color); /* 180 degree */
- }
-
- if (r == 1) {
- return;
- }
-
- di = 3 - 2*r;
- xx = 0;
- yy = r;
- while (xx < yy) {
-
- if (di < 0) {
- di += 4*xx + 6;
- } else {
- di += 4*(xx - yy) + 10;
- yy--;
- draw_y0--;
- draw_y1--;
- draw_y2++;
- draw_y3++;
- draw_x4--;
- draw_x5++;
- draw_x6--;
- draw_x7++;
- }
- xx++;
- draw_x0++;
- draw_x1--;
- draw_x2++;
- draw_x3--;
- draw_y4++;
- draw_y5++;
- draw_y6--;
- draw_y7--;
-
- if ( (draw_x0 <= width()) && (draw_y0>=0) ) {
- pixel(draw_x0, draw_y0, color);
- }
-
- if ( (draw_x1 >= 0) && (draw_y1 >= 0) ) {
- pixel(draw_x1, draw_y1, color);
- }
-
- if ( (draw_x2 <= width()) && (draw_y2 <= height()) ) {
- pixel(draw_x2, draw_y2, color);
- }
-
- if ( (draw_x3 >=0 ) && (draw_y3 <= height()) ) {
- pixel(draw_x3, draw_y3, color);
- }
-
- if ( (draw_x4 <= width()) && (draw_y4 >= 0) ) {
- pixel(draw_x4, draw_y4, color);
- }
-
- if ( (draw_x5 >= 0) && (draw_y5 >= 0) ) {
- pixel(draw_x5, draw_y5, color);
- }
- if ( (draw_x6 <=width()) && (draw_y6 <= height()) ) {
- pixel(draw_x6, draw_y6, color);
- }
- if ( (draw_x7 >= 0) && (draw_y7 <= height()) ) {
- pixel(draw_x7, draw_y7, color);
- }
- }
- return;
-}
-
-void SPI_TFTx2::fillcircle(int x, int y, int r, int color)
-{
- int i;
- for (i = 0; i <= r; i++)
- circle(x,y,i,color);
-}
-
-
-
-void SPI_TFTx2::hline(int x0, int x1, int y, int color)
-{
- int w,i;
- w = x1 - x0 + 1;
- window(x0,y,w,1);
- wr_cmd(0x22);
- if (seldisp == 0) {
- _cs0 = 0;
- _cs1 = 1;
- } else if (seldisp == 1) {
- _cs0 = 1;
- _cs1 = 0;
- } else {
- _cs0 = 0;
- _cs1 = 0;
- }
- if (spi_port == 0) { // TFT on SSP0
- for (i = 0; i < ( width() * height()); i++)
-#if defined USE_DMA
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
- /* Enable SSP0 for DMA. */
- LPC_SSP0->DMACR = 0x2;
-#endif
- LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP0->DR = 0x72; // start Data
- LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
- } else {
-#if defined USE_DMA
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
- /* Enable SSP1 for DMA. */
- LPC_SSP1->DMACR = 0x2;
-#endif
- LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP1->DR = 0x72; // start Data
- LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
- }
-#if defined USE_DMA
- LPC_GPDMA->DMACIntTCClear = 0x1;
- LPC_GPDMA->DMACIntErrClr = 0x1;
- LPC_GPDMACH0->DMACCSrcAddr = (uint32_t)&color;
- LPC_GPDMACH0->DMACCControl = w | (1UL << 18) | (1UL << 21) | (1UL << 31) ; // 16 bit transfer , no address increment, interrupt
- LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
- LPC_GPDMA->DMACSoftSReq = 0x1; // start DMA
- do {
- } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
- if (spi_port == 0) { // TFT on SSP0
- do {
- } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI FIFO not empty
- } else {
- do {
- } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI FIFO not empty
- }
-#else
- for (i=0; i<w; i++) {
- _spi.write(color);
- }
-
-#endif
- _cs0 = 1;
- _cs1 = 1;
- WindowMax();
- return;
-}
-
-void SPI_TFTx2::vline(int x, int y0, int y1, int color)
-{
- int h;
- h = y1 - y0 + 1;
- window(x,y0,1,h);
- wr_cmd(0x22);
- if (seldisp == 0) {
- _cs0 = 0;
- _cs1 = 1;
- } else if (seldisp == 1) {
- _cs0 = 1;
- _cs1 = 0;
- } else {
- _cs0 = 0;
- _cs1 = 0;
- }
- if (spi_port == 0) { // TFT on SSP0
-#if defined USE_DMA
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
- /* Enable SSP0 for DMA. */
- LPC_SSP0->DMACR = 0x2;
-#endif
- LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP0->DR = 0x72; // start Data
- LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
- } else {
-#if defined USE_DMA
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
- /* Enable SSP1 for DMA. */
- LPC_SSP1->DMACR = 0x2;
-#endif
- LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP1->DR = 0x72; // start Data
- LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
- }
-#if defined USE_DMA
- LPC_GPDMA->DMACIntTCClear = 0x1;
- LPC_GPDMA->DMACIntErrClr = 0x1;
- LPC_GPDMACH0->DMACCSrcAddr = (uint32_t)&color;
- LPC_GPDMACH0->DMACCControl = h | (1UL << 18) | (1UL << 21) | (1UL << 31) ; // 16 bit transfer , no address increment, interrupt
- LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
- LPC_GPDMA->DMACSoftSReq = 0x1;
- do {
- } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
-
- if (spi_port == 0) { // TFT on SSP0
- do {
- } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI FIFO not empty
- } else {
- do {
- } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI FIFO not empty
- }
-#else
- for (int y=0; y<h; y++) {
- _spi.write(color);
- }
-#endif
- _cs0 = 1;
- _cs1 = 1;
- WindowMax();
- return;
-}
-
-void SPI_TFTx2::line(int x0, int y0, int x1, int y1, int color)
-{
- //WindowMax();
- int dx = 0, dy = 0;
- int dx_sym = 0, dy_sym = 0;
- int dx_x2 = 0, dy_x2 = 0;
- int di = 0;
-
- dx = x1-x0;
- dy = y1-y0;
-
- // vline and hline are very slow for some reason so not using
- //if (dx == 0) { /* vertical line */
- // if (y1 > y0) vline(x0,y0,y1,color);
- // else vline(x0,y1,y0,color);
- // return;
- //}
-
- if (dx > 0) {
- dx_sym = 1;
- } else {
- dx_sym = -1;
- }
- //if (dy == 0) { /* horizontal line */
- // if (x1 > x0) hline(x0,x1,y0,color);
- // else hline(x1,x0,y0,color);
- // return;
- //}
-
- if (dy > 0) {
- dy_sym = 1;
- } else {
- dy_sym = -1;
- }
-
- dx = dx_sym*dx;
- dy = dy_sym*dy;
-
- dx_x2 = dx*2;
- dy_x2 = dy*2;
-
- if (dx >= dy) {
- di = dy_x2 - dx;
- while (x0 != x1) {
-
- pixel(x0, y0, color);
- x0 += dx_sym;
- if (di<0) {
- di += dy_x2;
- } else {
- di += dy_x2 - dx_x2;
- y0 += dy_sym;
- }
- }
- pixel(x0, y0, color);
- } else {
- di = dx_x2 - dy;
- while (y0 != y1) {
- pixel(x0, y0, color);
- y0 += dy_sym;
- if (di < 0) {
- di += dx_x2;
- } else {
- di += dx_x2 - dy_x2;
- x0 += dx_sym;
- }
- }
- pixel(x0, y0, color);
- }
- return;
-}
-
-
-void SPI_TFTx2::rect(int x0, int y0, int x1, int y1, int color)
-{
-
- if (x1 > x0) hline(x0,x1,y0,color);
- else hline(x1,x0,y0,color);
-
- if (y1 > y0) vline(x0,y0,y1,color);
- else vline(x0,y1,y0,color);
-
- if (x1 > x0) hline(x0,x1,y1,color);
- else hline(x1,x0,y1,color);
-
- if (y1 > y0) vline(x1,y0,y1,color);
- else vline(x1,y1,y0,color);
-
- return;
-}
-
-
-
-void SPI_TFTx2::fillrect(int x0, int y0, int x1, int y1, int color)
-{
-
- int h = y1 - y0 + 1;
- int w = x1 - x0 + 1;
- int pixel = h * w;
- int dma_count;
- window(x0,y0,w,h);
- wr_cmd(0x22);
- if (seldisp == 0) {
- _cs0 = 0;
- _cs1 = 1;
- } else if (seldisp == 1) {
- _cs0 = 1;
- _cs1 = 0;
- } else {
- _cs0 = 0;
- _cs1 = 0;
- }
- if (spi_port == 0) { // TFT on SSP0
- #if defined USE_DMA
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
- /* Enable SSP0 for DMA. */
- LPC_SSP0->DMACR = 0x2;
- #endif
- LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP0->DR = 0x72; // start Data
- LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
- } else {
- #if defined USE_DMA
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
- /* Enable SSP1 for DMA. */
- LPC_SSP1->DMACR = 0x2;
- #endif
- LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP1->DR = 0x72; // start Data
- LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
- }
- #if defined USE_DMA
- do {
- if (pixel > 4095) {
- dma_count = 4095;
- pixel = pixel - 4095;
- } else {
- dma_count = pixel;
- pixel = 0;
- }
- LPC_GPDMA->DMACIntTCClear = 0x1;
- LPC_GPDMA->DMACIntErrClr = 0x1;
- LPC_GPDMACH0->DMACCSrcAddr = (uint32_t)&color;
- LPC_GPDMACH0->DMACCControl = dma_count | (1UL << 18) | (1UL << 21) | (1UL << 31) ; // 16 bit transfer , no address increment, interrupt
- LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
- LPC_GPDMA->DMACSoftSReq = 0x1;
- do {
- } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
-
- } while (pixel > 0);
-
- if (spi_port == 0) { // TFT on SSP0
- do {
- } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI FIFO not empty
- } else {
- do {
- } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI FIFO not empty
- }
-
- #else // no DMA
- for (int p=0; p<pixel; p++) {
- _spi.write(color);
- }
- #endif
-
- _cs0 = 1;
- _cs1 = 1;
- WindowMax();
- return;
-}
-
-
-void SPI_TFTx2::locate(int x, int y)
-{
- char_x = x;
- char_y = y;
-}
-
-
-
-int SPI_TFTx2::columns()
-{
- return width() / font[1];
-}
-
-
-
-int SPI_TFTx2::rows()
-{
- return height() / font[2];
-}
-
-
-
-int SPI_TFTx2::_putc(int value)
-{
- if (value == '\n') { // new line
- char_x = 0;
- char_y = char_y + font[2];
- if (char_y >= height() - font[2]) {
- char_y = 0;
- }
- } else {
- character(char_x, char_y, value);
- }
- return value;
-}
-
-
-
-
-void SPI_TFTx2::character(int x, int y, int c)
-{
- unsigned int hor,vert,offset,bpl,j,i,b,p;
- unsigned char* zeichen;
- unsigned char z,w;
- #if defined USE_DMA
- unsigned int pixel;
- unsigned int dma_count,dma_off;
- uint16_t *buffer;
- #endif
-
- if ((c < 31) || (c > 127)) return; // test char range
-
- // read font parameter from start of array
- offset = font[0]; // bytes / char
- hor = font[1]; // get hor size of font
- vert = font[2]; // get vert size of font
- bpl = font[3]; // bytes per line
-
- if (char_x + hor > width()) {
- char_x = 0;
- char_y = char_y + vert;
- if (char_y >= height() - font[2]) {
- char_y = 0;
- }
- }
- window(char_x, char_y,hor,vert); // char box
- wr_cmd(0x22);
-
-#if defined USE_DMA
- pixel = hor * vert; // calculate buffer size
-
- buffer = (uint16_t *) malloc (2*pixel); // we need a buffer for the 16 bit
- if (buffer == NULL) {
- //led = 1;
- //pc.printf("Malloc error !\n\r");
- return; // error no memory
- }
-
- zeichen = &font[((c -32) * offset) + 4]; // start of char bitmap
- w = zeichen[0]; // width of actual char
- p = 0;
- // construct the char into the buffer
- for (j=0; j<vert; j++) { // vert line
- for (i=0; i<hor; i++) { // horz line
- z = zeichen[bpl * i + ((j & 0xF8) >> 3)+1];
- b = 1 << (j & 0x07);
- if (( z & b ) == 0x00) {
- buffer[p] = _background;
- } else {
- buffer[p] = _foreground;
- }
- p++;
- }
- }
-
- // copy the buffer with DMA SPI to display
- dma_off = 0; // offset for DMA transfer
- if (seldisp == 0) {
- _cs0 = 0;
- _cs1 = 1;
- } else if (seldisp == 1) {
- _cs0 = 1;
- _cs1 = 0;
- } else {
- _cs0 = 0;
- _cs1 = 0;
- }
- if (spi_port == 0) { // TFT on SSP0
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
- /* Enable SSP0 for DMA. */
- LPC_SSP0->DMACR = 0x2;
- LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP0->DR = 0x72; // start Data
- LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
- } else {
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
- /* Enable SSP1 for DMA. */
- LPC_SSP1->DMACR = 0x2;
- LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP1->DR = 0x72; // start Data
- LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
- }
-
- // start DMA
- do {
- if (pixel > 4095) { // this is a giant font !
- dma_count = 4095;
- pixel = pixel - 4095;
- } else {
- dma_count = pixel;
- pixel = 0;
- }
- LPC_GPDMA->DMACIntTCClear = 0x1;
- LPC_GPDMA->DMACIntErrClr = 0x1;
- LPC_GPDMACH0->DMACCSrcAddr = (uint32_t) (buffer + dma_off);
- LPC_GPDMACH0->DMACCControl = dma_count | (1UL << 18) | (1UL << 21) | (1UL << 31) | DMA_CHANNEL_SRC_INC ; // 16 bit transfer , address increment, interrupt
- LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
- LPC_GPDMA->DMACSoftSReq = 0x1;
- do {
- } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
- dma_off = dma_off + dma_count;
- } while (pixel > 0);
-
- free ((uint16_t *) buffer);
-
- if (spi_port == 0) { // TFT on SSP0
- do {
- } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI0 not idle
- /* disable SSP0 for DMA. */
- LPC_SSP0->DMACR = 0x0;
- } else {
- do {
- } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI1 not idle
- /* disable SSP1 for DMA. */
- LPC_SSP1->DMACR = 0x0;
- }
-#else
- if (seldisp == 0) {
- _cs0 = 0;
- _cs1 = 1;
- } else if (seldisp == 1) {
- _cs0 = 1;
- _cs1 = 0;
- } else {
- _cs0 = 0;
- _cs1 = 0;
- }
- if (spi_port == 0) { // TFT on SSP0
- LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP0->DR = 0x72; // start Data
- LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
- } else {
- LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP1->DR = 0x72; // start Data
- LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
- }
- zeichen = &font[((c -32) * offset) + 4]; // start of char bitmap
- w = zeichen[0]; // width of actual char
- for (j=0; j<vert; j++) { // vert line
- for (i=0; i<hor; i++) { // horz line
- z = zeichen[bpl * i + ((j & 0xF8) >> 3)+1];
- b = 1 << (j & 0x07);
- if (( z & b ) == 0x00) {
- _spi.write(_background);
- } else {
- _spi.write(_foreground);
- }
- }
- }
-#endif
- _cs0 = 1;
- _cs1 = 1;
- WindowMax();
- if ((w + 2) < hor) { // x offset to next char
- char_x += w + 2;
- } else char_x += hor;
-
-}
-
-
-void SPI_TFTx2::set_font(unsigned char* f)
-{
- font = f;
-}
-
-void SPI_TFTx2::Bitmap(unsigned int x, unsigned int y, unsigned int w, unsigned int h,unsigned char *bitmap)
-{
- unsigned int j;
- int padd;
- unsigned short *bitmap_ptr = (unsigned short *)bitmap;
- // the lines are padded to multiple of 4 bytes in a bitmap
- padd = -1;
- do {
- padd ++;
- } while (2*(w + padd)%4 != 0);
- window(x, y, w, h);
- wr_cmd(0x22);
- if (seldisp == 0) {
- _cs0 = 0;
- _cs1 = 1;
- } else if (seldisp == 1) {
- _cs0 = 1;
- _cs1 = 0;
- } else {
- _cs0 = 0;
- _cs1 = 0;
- }
- if (spi_port == 0) { // TFT on SSP0
-#if defined USE_DMA
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
- /* Enable SSP0 for DMA. */
- LPC_SSP0->DMACR = 0x2;
-#endif
- LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP0->DR = 0x72; // start Data
- LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
-
- } else {
-#if defined USE_DMA
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
- /* Enable SSP1 for DMA. */
- LPC_SSP1->DMACR = 0x2;
-#endif
- LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP1->DR = 0x72; // start Data command
- LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
- }
-
- bitmap_ptr += ((h - 1)* (w + padd));
-#if defined USE_DMA
- for (j = 0; j < h; j++) { //Lines
- LPC_GPDMA->DMACIntTCClear = 0x1;
- LPC_GPDMA->DMACIntErrClr = 0x1;
- LPC_GPDMACH0->DMACCSrcAddr = (uint32_t)bitmap_ptr;
- LPC_GPDMACH0->DMACCControl = w | (1UL << 18) | (1UL << 21) | (1UL << 31) | DMA_CHANNEL_SRC_INC ; // 16 bit transfer , address increment, interrupt
- LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
- LPC_GPDMA->DMACSoftSReq = 0x1;
- do {
- } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
-
- bitmap_ptr -= w;
- bitmap_ptr -= padd;
- }
-#else
- unsigned int i;
- for (j = 0; j < h; j++) { //Lines
- for (i = 0; i < w; i++) { // copy pixel data to TFT
- _spi.write(*bitmap_ptr); // one line
- bitmap_ptr++;
- }
- bitmap_ptr -= 2*w;
- bitmap_ptr -= padd;
- }
-#endif
- if (spi_port == 0) { // TFT on SSP0
- do {
- } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI FIFO not empty
- } else {
- do {
- } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI FIFO not empty
- }
- _cs0 = 1;
- _cs1 = 1;
- WindowMax();
-}
-
-
-int SPI_TFTx2::BMP_16(unsigned int x, unsigned int y, const char *Name_BMP)
-{
-
-#define OffsetPixelWidth 18
-#define OffsetPixelHeigh 22
-#define OffsetFileSize 34
-#define OffsetPixData 10
-#define OffsetBPP 28
-
- char filename[50];
- unsigned char BMP_Header[54];
- unsigned short BPP_t;
- unsigned int PixelWidth,PixelHeigh,start_data;
- unsigned int i,off;
- int padd,j;
- unsigned short *line;
-
- // get the filename
- LocalFileSystem local("local");
- sprintf(&filename[0],"/local/");
- i=7;
- while (*Name_BMP!='\0') {
- filename[i++]=*Name_BMP++;
- }
-
- fprintf(stderr, "filename : %s \n\r",filename);
-
- FILE *Image = fopen((const char *)&filename[0], "rb"); // open the bmp file
- if (!Image) {
- return(0); // error file not found !
- }
-
- fread(&BMP_Header[0],1,54,Image); // get the BMP Header
-
- if (BMP_Header[0] != 0x42 || BMP_Header[1] != 0x4D) { // check magic byte
- fclose(Image);
- return(-1); // error no BMP file
- }
-
- BPP_t = BMP_Header[OffsetBPP] + (BMP_Header[OffsetBPP + 1] << 8);
- if (BPP_t != 0x0010) {
- fclose(Image);
- return(-2); // error no 16 bit BMP
- }
-
- PixelHeigh = BMP_Header[OffsetPixelHeigh] + (BMP_Header[OffsetPixelHeigh + 1] << 8) + (BMP_Header[OffsetPixelHeigh + 2] << 16) + (BMP_Header[OffsetPixelHeigh + 3] << 24);
- PixelWidth = BMP_Header[OffsetPixelWidth] + (BMP_Header[OffsetPixelWidth + 1] << 8) + (BMP_Header[OffsetPixelWidth + 2] << 16) + (BMP_Header[OffsetPixelWidth + 3] << 24);
- if (PixelHeigh > height() + y || PixelWidth > width() + x) {
- fclose(Image);
- return(-3); // to big
- }
-
- start_data = BMP_Header[OffsetPixData] + (BMP_Header[OffsetPixData + 1] << 8) + (BMP_Header[OffsetPixData + 2] << 16) + (BMP_Header[OffsetPixData + 3] << 24);
-
- line = (unsigned short *) malloc (2 * PixelWidth); // we need a buffer for a line
- if (line == NULL) {
- return(-4); // error no memory
- }
-
- // the bmp lines are padded to multiple of 4 bytes
- padd = -1;
- do {
- padd ++;
- } while ((PixelWidth * 2 + padd)%4 != 0);
-
-
-//fseek(Image, 70 ,SEEK_SET);
- window(x, y,PixelWidth ,PixelHeigh);
- wr_cmd(0x22);
- if (seldisp == 0) {
- _cs0 = 0;
- _cs1 = 1;
- } else if (seldisp == 1) {
- _cs0 = 1;
- _cs1 = 0;
- } else {
- _cs0 = 0;
- _cs1 = 0;
- }
-
- if (spi_port == 0) { // TFT on SSP0
-#if defined USE_DMA
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
- /* Enable SSP0 for DMA. */
- LPC_SSP0->DMACR = 0x2;
-#endif
- LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP0->DR = 0x72; // start Data
- LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
-
- } else {
-#if defined USE_DMA
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
- /* Enable SSP1 for DMA. */
- LPC_SSP1->DMACR = 0x2;
-#endif
- LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP1->DR = 0x72; // start Data
- LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
- }
- for (j = PixelHeigh - 1; j >= 0; j--) { //Lines bottom up
- off = j * (PixelWidth * 2 + padd) + start_data; // start of line
- fseek(Image, off ,SEEK_SET);
- fread(line,1,PixelWidth * 2,Image); // read a line - slow !
-#if defined USE_DMA
- LPC_GPDMA->DMACIntTCClear = 0x1;
- LPC_GPDMA->DMACIntErrClr = 0x1;
- LPC_GPDMACH0->DMACCSrcAddr = (uint32_t)line;
- LPC_GPDMACH0->DMACCControl = PixelWidth | (1UL << 18) | (1UL << 21) | (1UL << 31) | DMA_CHANNEL_SRC_INC ; // 16 bit transfer , address increment, interrupt
- LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
- LPC_GPDMA->DMACSoftSReq = 0x1;
- do {
- } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
-#else
- for (i = 0; i < PixelWidth; i++) { // copy pixel data to TFT
- _spi.write(line[i]); // one 16 bit pixel
- }
-#endif
- }
- if (spi_port == 0) { // TFT on SSP0
- do {
- } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI FIFO not empty
- } else {
- do {
- } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI FIFO not empty
- }
- _cs0 = 1;
- _cs1 = 1;
- free (line);
- fclose(Image);
- WindowMax();
- return(1);
-}
\ No newline at end of file
diff -r aca12a61d2b1 -r 69ce6c784cae SPI_TFTx2.h
--- a/SPI_TFTx2.h Sun May 18 12:45:24 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,417 +0,0 @@
-/* mbed library for 240*320 pixel display TFT based on HX8347D LCD Controller
- * Copyright (c) 2011 Peter Drescher - DC2PD
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
- /* change the char position handling
- * use pixel (x,y) instadt of colum row */
-
-
-#ifndef MBED_SPI_TFT_H
-#define MBED_SPI_TFT_H
-
-//#define NO_DMA
-
-#include "mbed.h"
-#include "GraphicsDisplay.h"
-
-#define RGB(r,g,b) (((r&0xF8)<<8)|((g&0xFC)<<3)|((b&0xF8)>>3)) //5 red | 6 green | 5 blue
-
-#define SPI_START (0x70) /* Start byte for SPI transfer */
-#define SPI_RD (0x01) /* WR bit 1 within start */
-#define SPI_WR (0x00) /* WR bit 0 within start */
-#define SPI_DATA (0x02) /* RS bit 1 within start byte */
-#define SPI_INDEX (0x00) /* RS bit 0 within start byte */
-
-
-/* some RGB color definitions */
-#define Black 0x0000 /* 0, 0, 0 */
-#define Navy 0x0007 /* 0, 0, 64 */
-#define DarkGreen 0x03E0 /* 0, 128, 0 */
-#define DarkCyan 0x03EF /* 0, 128, 128 */
-#define Maroon 0x7800 /* 128, 0, 0 */
-#define Purple 0x780F /* 128, 0, 128 */
-#define Olive 0x7BE0 /* 128, 128, 0 */
-#define LightGrey 0xC618 /* 192, 192, 192 */
-#define DarkGrey 0x7BEF /* 128, 128, 128 */
-#define Blue 0x001F /* 0, 0, 255 */
-#define Green 0x07E0 /* 0, 255, 0 */
-#define Cyan 0x07FF /* 0, 255, 255 */
-#define Red 0xF800 /* 255, 0, 0 */
-#define Magenta 0xF81F /* 255, 0, 255 */
-#define Yellow 0xFFE0 /* 255, 255, 0 */
-#define White 0xFFFF /* 255, 255, 255 */
-#define Orange 0xFD20 /* 255, 165, 0 */
-#define GreenYellow 0xAFE5 /* 173, 255, 47 */
-#define Amber 0xFBE0 /* 255, 126, 0 */
-
-
-// some defines for the DMA use
-#define DMA_CHANNEL_ENABLE 1
-#define DMA_TRANSFER_TYPE_M2P (1UL << 11)
-#define DMA_CHANNEL_TCIE (1UL << 31)
-#define DMA_CHANNEL_SRC_INC (1UL << 26)
-#define DMA_MASK_IE (1UL << 14)
-#define DMA_MASK_ITC (1UL << 15)
-#define DMA_SSP1_TX (1UL << 2)
-#define DMA_SSP0_TX (0)
-#define DMA_DEST_SSP1_TX (2UL << 6)
-#define DMA_DEST_SSP0_TX (0UL << 6)
-
-
-/** Display control class, based on GraphicsDisplay and TextDisplay
- *
- * Example:
- * @code
- * #include "stdio.h"
- * #include "mbed.h"
- * #include "SPI_TFTx2.h"
- * #include "string"
- * #include "Arial12x12.h"
- * #include "Arial24x23.h"
- *
- *
- *
- * // the TFT is connected to SPI pin 5-7
- * SPI_TFTx2 TFT(p5, p6, p7, p8, p9, p15,"TFT"); // mosi, miso, sclk, cs0, cs1, reset
- *
- * int main() {
- * TFT.claim(stdout); // send stdout to the TFT display
- * //TFT.claim(stderr); // send stderr to the TFT display
- *
- * TFT.background(Black); // set background to black
- * TFT.foreground(White); // set chars to white
- * TFT.cls(); // clear the screen
- * TFT.set_font((unsigned char*) Arial12x12); // select the font
- *
- * TFT.set_orientation(0);
- * TFT.set_display(0);
- * TFT.locate(0,0);
- * printf(" Hello Mbed 0");
- * TFT.set_font((unsigned char*) Arial24x23); // select font 2
- * TFT.locate(48,115);
- * TFT.printf("Bigger Font");
- * }
- * @endcode
- */
- class SPI_TFTx2 : public GraphicsDisplay {
- public:
-
- /** Create a SPI_TFTx2 object connected to SPI and two pins
- *
- * @param mosi,miso,sclk SPI
- * @param cs0 pin connected to CS of left display
- * @param cs1 pin connected to CS of right display
- * @param reset pin connected to RESET of display
- *
- */
- SPI_TFTx2(PinName mosi, PinName miso, PinName sclk, PinName cs0, PinName cs1, PinName reset,const char* name ="TFT");
-
- /** Get the width of the screen in pixel
- *
- * @param
- * @returns width of screen in pixel
- *
- */
- virtual int width();
-
- /** Get the height of the screen in pixel
- *
- * @returns height of screen in pixel
- *
- */
- virtual int height();
-
- /** Draw a pixel at x,y with color
- *
- * @param x horizontal position
- * @param y vertical position
- * @param color 16 bit pixel color
- */
- virtual void pixel(int x, int y,int colour);
-
- /** draw a circle
- *
- * @param x0,y0 center
- * @param r radius
- * @param color 16 bit color *
- *
- */
- void circle(int x, int y, int r, int colour);
-
- /** draw a filled circle
- *
- * @param x0,y0 center
- * @param r radius
- * @param color 16 bit color *
- *
- * use circle with different radius,
- * can miss some pixel
- */
- void fillcircle(int x, int y, int r, int colour);
-
-
-
- /** draw a 1 pixel line
- *
- * @param x0,y0 start point
- * @param x1,y1 stop point
- * @param color 16 bit color
- *
- */
- void line(int x0, int y0, int x1, int y1, int colour);
-
- /** draw a rect
- *
- * @param x0,y0 top left corner
- * @param x1,y1 down right corner
- * @param color 16 bit color
- * *
- */
- void rect(int x0, int y0, int x1, int y1, int colour);
-
- /** draw a filled rect
- *
- * @param x0,y0 top left corner
- * @param x1,y1 down right corner
- * @param color 16 bit color
- *
- */
- void fillrect(int x0, int y0, int x1, int y1, int colour);
-
- /** setup cursor position
- *
- * @param x x-position (top left)
- * @param y y-position
- */
- virtual void locate(int x, int y);
-
- /** Fill the screen with _backgroun color
- *
- */
- virtual void cls (void);
-
- /** calculate the max number of char in a line
- *
- * @returns max columns
- * depends on actual font size
- *
- */
- virtual int columns(void);
-
- /** calculate the max number of columns
- *
- * @returns max column
- * depends on actual font size
- *
- */
- virtual int rows(void);
-
- /** put a char on the screen
- *
- * @param value char to print
- * @returns printed char
- *
- */
- virtual int _putc(int value);
-
- /** draw a character on given position out of the active font to the TFT
- *
- * @param x x-position of char (top left)
- * @param y y-position
- * @param c char to print
- *
- */
- virtual void character(int x, int y, int c);
-
- /** paint a bitmap on the TFT
- *
- * @param x,y : upper left corner
- * @param w width of bitmap
- * @param h high of bitmap
- * @param *bitmap pointer to the bitmap data
- *
- * bitmap format: 16 bit R5 G6 B5
- *
- * use Gimp to create / load , save as BMP, option 16 bit R5 G6 B5
- * use winhex to load this file and mark data stating at offset 0x46 to end
- * use edit -> copy block -> C Source to export C array
- * paste this array into your program
- *
- * define the array as static const unsigned char to put it into flash memory
- * cast the pointer to (unsigned char *) :
- * tft.Bitmap(10,40,309,50,(unsigned char *)scala);
- */
- void Bitmap(unsigned int x, unsigned int y, unsigned int w, unsigned int h,unsigned char *bitmap);
-
-
- /** paint a 16 bit BMP from local filesytem on the TFT (slow)
- *
- * @param x,y : upper left corner
- * @param *Name_BMP name of the BMP file
- * @returns 1 if bmp file was found and painted
- * @returns -1 if bmp file was found not found
- * @returns -2 if bmp file is not 16bit
- * @returns -3 if bmp file is to big for screen
- * @returns -4 if buffer malloc go wrong
- *
- * bitmap format: 16 bit R5 G6 B5
- *
- * use Gimp to create / load , save as BMP, option 16 bit R5 G6 B5
- * copy to internal file system
- *
- */
-
- int BMP_16(unsigned int x, unsigned int y, const char *Name_BMP);
-
-
-
- /** select the font to use
- *
- * @param f pointer to font array
- *
- * font array can created with GLCD Font Creator from http://www.mikroe.com
- * you have to add 4 parameter at the beginning of the font array to use:
- * - the number of byte / char
- * - the vertial size in pixel
- * - the horizontal size in pixel
- * - the number of byte per vertical line
- * you also have to change the array to char[]
- *
- */
- void set_font(unsigned char* f);
-
- /** Set the orientation of the screen
- * x,y: 0,0 is always top left
- *
- * @param o direction to use the screen (0-3) 90� Steps
- *
- */
- void set_orientation(unsigned int o);
-
- /* Select between two displays */
- void set_display(unsigned int o);
-
-
- SPI _spi;
- DigitalOut _cs0;
- DigitalOut _cs1;
- DigitalOut _reset;
- unsigned char* font;
-
-
-
-
-protected:
-
- /** Set draw window region to whole screen
- *
- */
- void WindowMax (void);
-
-
- /** draw a horizontal line
- *
- * @param x0 horizontal start
- * @param x1 horizontal stop
- * @param y vertical position
- * @param color 16 bit color
- *
- */
- void hline(int x0, int x1, int y, int colour);
-
- /** draw a vertical line
- *
- * @param x horizontal position
- * @param y0 vertical start
- * @param y1 vertical stop
- * @param color 16 bit color
- */
- void vline(int y0, int y1, int x, int colour);
-
- /** Set draw window region
- *
- * @param x horizontal position
- * @param y vertical position
- * @param w window width in pixel
- * @param h window height in pixels
- */
- void window (unsigned int x, unsigned int y, unsigned int w, unsigned int h);
-
-
-
- /** Init the HX8347D controller
- *
- */
- void tft_reset();
-
- /** Write data to the LCD controller
- *
- * @param dat data written to LCD controller
- *
- */
- //void wr_dat(unsigned int value);
- void wr_dat(unsigned char value);
-
- /** Write a command the LCD controller
- *
- * @param cmd: command to be written
- *
- */
- void wr_cmd(unsigned char value);
-
- /** Start data sequence to the LCD controller
- *
- */
- //void wr_dat_start();
-
- /** Stop of data writing to the LCD controller
- *
- */
- //void wr_dat_stop();
-
- /** write data to the LCD controller
- *
- * @param data to be written
- * *
- */
- void wr_dat_only(unsigned short dat);
-
- /** Read data from the LCD controller
- *
- * @returns data from LCD controller
- *
- */
- unsigned short rd_dat(void);
-
- /** Write a value to the to a LCD register
- *
- * @param reg register to be written
- * @param val data to be written
- */
- void wr_reg (unsigned char reg, unsigned char val);
-
- /** Read a LCD register
- *
- * @param reg register to be read
- * @returns value of the register
- */
- unsigned short rd_reg (unsigned char reg);
-
- unsigned char spi_port;
- unsigned int orientation;
- unsigned int seldisp;
- unsigned int char_x;
- unsigned int char_y;
-
-
-};
-
-#endif
diff -r aca12a61d2b1 -r 69ce6c784cae SPI_TFTx2_ILI9341.cpp
--- a/SPI_TFTx2_ILI9341.cpp Sun May 18 12:45:24 2014 +0000
+++ b/SPI_TFTx2_ILI9341.cpp Tue Mar 15 14:55:32 2016 +0000
@@ -1,3 +1,6 @@
+/* Rem modifie par Schneider Francois le 13/3/2016 */
+/* adapte a un seul afficheur */
+
/* mbed library for 240*320 pixel display TFT based on ILI9341 LCD Controller
* Copyright (c) 2013 Peter Drescher - DC2PD
* Updated by Yoong HM for maintaining SPI_TFTx2 and SPI_TFTx2_ILI9341 in the
@@ -27,13 +30,13 @@
//extern Serial pc;
//extern DigitalOut xx; // debug !!
-SPI_TFTx2_ILI9341::SPI_TFTx2_ILI9341(PinName mosi, PinName miso, PinName sclk, PinName cs0, PinName cs1, PinName reset, PinName dc, const char *name)
- : _spi(mosi, miso, sclk), _cs0(cs0), _cs1(cs1), _reset(reset), _dc(dc), GraphicsDisplay(name)
+SPI_TFTx2_ILI9341::SPI_TFTx2_ILI9341(PinName mosi, PinName miso, PinName sclk, PinName cs0, PinName reset, PinName dc, const char *name)
+ : _spi(mosi, miso, sclk), _cs0(cs0), _reset(reset), _dc(dc), GraphicsDisplay(name)
{
clk = sclk;
orientation = 0;
char_x = 0;
- seldisp = 2;
+// seldisp = 0;
tft_reset();
}
@@ -70,7 +73,6 @@
break;
}
_cs0 = 1;
- _cs1 = 1;
WindowMax();
}
@@ -84,16 +86,7 @@
void SPI_TFTx2_ILI9341::wr_cmd(unsigned char cmd)
{
_dc = 0;
- if (seldisp == 0) {
- _cs0 = 0;
- _cs1 = 1;
- } else if (seldisp == 1) {
- _cs0 = 1;
- _cs1 = 0;
- } else {
- _cs0 = 0;
- _cs1 = 0;
- }
+ _cs0 = 0;
_spi.write(cmd); // mbed lib
_dc = 1;
}
@@ -102,16 +95,7 @@
void SPI_TFTx2_ILI9341::wr_dat(unsigned char dat)
{
- if (seldisp == 0) {
_cs0 = 0;
- _cs1 = 1;
- } else if (seldisp == 1) {
- _cs0 = 1;
- _cs1 = 0;
- } else {
- _cs0 = 0;
- _cs1 = 0;
- }
_spi.write(dat); // mbed lib
}
@@ -123,22 +107,11 @@
{
char r;
_dc = 0;
- if (seldisp == 0) {
- _cs0 = 0;
- _cs1 = 1;
- } else if (seldisp == 1) {
- _cs0 = 1;
- _cs1 = 0;
- } else {
- _cs0 = 0;
- _cs1 = 0;
- }
+ _cs0 = 0;
_spi.write(cmd); // mbed lib
_cs0 = 1;
- _cs1 = 1;
r = _spi.write(0xff);
_cs0 = 1;
- _cs1 = 1;
return(r);
}
@@ -148,16 +121,7 @@
int d;
char r;
_dc = 0;
- if (seldisp == 0) {
- _cs0 = 0;
- _cs1 = 1;
- } else if (seldisp == 1) {
- _cs0 = 1;
- _cs1 = 0;
- } else {
- _cs0 = 0;
- _cs1 = 0;
- }
+ _cs0 = 0;
d = cmd;
d = d << 1;
_spi.format(9,3); // we have to add a dummy clock cycle
@@ -173,7 +137,6 @@
r = _spi.write(0xff);
d = (d << 8) | r;
_cs0 = 1;
- _cs1 = 1;
return(d);
}
@@ -194,7 +157,6 @@
_spi.format(8,3); // 8 bit spi mode 3
_spi.frequency(48000000); // 48 Mhz SPI clock
_cs0 = 1; // cs high
- _cs1 = 1;
_dc = 1; // dc high
_reset = 0; // display reset
@@ -212,23 +174,17 @@
_spi.write(0x83);
_spi.write(0x30);
_cs0 = 1;
- _cs1 = 1;
-
wr_cmd(0xED);
_spi.write(0x64);
_spi.write(0x03);
_spi.write(0x12);
_spi.write(0x81);
_cs0 = 1;
- _cs1 = 1;
-
wr_cmd(0xE8);
_spi.write(0x85);
_spi.write(0x01);
_spi.write(0x79);
_cs0 = 1;
- _cs1 = 1;
-
wr_cmd(0xCB);
_spi.write(0x39);
_spi.write(0x2C);
@@ -236,65 +192,52 @@
_spi.write(0x34);
_spi.write(0x02);
_cs0 = 1;
- _cs1 = 1;
wr_cmd(0xF7);
_spi.write(0x20);
_cs0 = 1;
- _cs1 = 1;
wr_cmd(0xEA);
_spi.write(0x00);
_spi.write(0x00);
_cs0 = 1;
- _cs1 = 1;
wr_cmd(0xC0); // POWER_CONTROL_1
_spi.write(0x26);
_cs0 = 1;
- _cs1 = 1;
wr_cmd(0xC1); // POWER_CONTROL_2
_spi.write(0x11);
_cs0 = 1;
- _cs1 = 1;
wr_cmd(0xC5); // VCOM_CONTROL_1
_spi.write(0x35);
_spi.write(0x3E);
_cs0 = 1;
- _cs1 = 1;
wr_cmd(0xC7); // VCOM_CONTROL_2
_spi.write(0xBE);
- _cs0 = 1;
- _cs1 = 1;
wr_cmd(0x36); // MEMORY_ACCESS_CONTROL
_spi.write(0x48);
_cs0 = 1;
- _cs1 = 1;
wr_cmd(0x3A); // COLMOD_PIXEL_FORMAT_SET
_spi.write(0x55); // 16 bit pixel
_cs0 = 1;
- _cs1 = 1;
wr_cmd(0xB1); // Frame Rate
_spi.write(0x00);
_spi.write(0x1B);
_cs0 = 1;
- _cs1 = 1;
-
+
wr_cmd(0xF2); // Gamma Function Disable
_spi.write(0x08);
_cs0 = 1;
- _cs1 = 1;
wr_cmd(0x26);
_spi.write(0x01); // gamma set for curve 01/2/04/08
_cs0 = 1;
- _cs1 = 1;
wr_cmd(0xE0); // positive gamma correction
_spi.write(0x1F);
@@ -313,7 +256,6 @@
_spi.write(0x05);
_spi.write(0x00);
_cs0 = 1;
- _cs1 = 1;
wr_cmd(0xE1); // negativ gamma correction
_spi.write(0x00);
@@ -332,7 +274,6 @@
_spi.write(0x3A);
_spi.write(0x1F);
_cs0 = 1;
- _cs1 = 1;
WindowMax ();
@@ -345,7 +286,6 @@
wr_cmd(0xB7); // entry mode
_spi.write(0x07);
_cs0 = 1;
- _cs1 = 1;
wr_cmd(0xB6); // display function control
_spi.write(0x0A);
@@ -353,17 +293,14 @@
_spi.write(0x27);
_spi.write(0x00);
_cs0 = 1;
- _cs1 = 1;
wr_cmd(0x11); // sleep out
_cs0 = 1;
- _cs1 = 1;
wait_ms(100);
wr_cmd(0x29); // display on
_cs0 = 1;
- _cs1 = 1;
wait_ms(100);
@@ -376,12 +313,10 @@
_spi.write(x >> 8);
_spi.write(x);
_cs0 = 1;
- _cs1 = 1;
wr_cmd(0x2B);
_spi.write(y >> 8);
_spi.write(y);
_cs0 = 1;
- _cs1 = 1;
wr_cmd(0x2C); // send pixel
#if defined TARGET_KL25Z // 8 Bit SPI
_spi.write(color >> 8);
@@ -392,7 +327,6 @@
_spi.format(8,3);
#endif
_cs0 = 1;
- _cs1 = 1;
}
@@ -405,14 +339,12 @@
_spi.write(x+w-1);
_cs0 = 1;
- _cs1 = 1;
wr_cmd(0x2B);
_spi.write(y >> 8);
_spi.write(y);
_spi.write((y+h-1) >> 8);
_spi.write(y+h-1);
_cs0 = 1;
- _cs1 = 1;
}
@@ -443,7 +375,6 @@
_spi.format(8,3);
#endif
_cs0 = 1;
- _cs1 = 1;
}
@@ -503,7 +434,6 @@
_spi.format(8,3);
#endif
_cs0 = 1;
- _cs1 = 1;
WindowMax();
return;
}
@@ -527,7 +457,6 @@
_spi.format(8,3);
#endif
_cs0 = 1;
- _cs1 = 1;
WindowMax();
return;
}
@@ -647,7 +576,6 @@
_spi.format(8,3);
#endif
_cs0 = 1;
- _cs1 = 1;
WindowMax();
return;
}
@@ -740,7 +668,6 @@
}
}
_cs0 = 1;
- _cs1 = 1;
#ifndef TARGET_KL25Z // 16 Bit SPI
_spi.format(8,3);
#endif
@@ -796,7 +723,6 @@
bitmap_ptr -= padd;
}
_cs0 = 1;
- _cs1 = 1;
#ifndef TARGET_KL25Z // 16 Bit SPI
_spi.format(8,3);
#endif
@@ -887,7 +813,6 @@
}
}
_cs0 = 1;
- _cs1 = 1;
_spi.format(8,3);
free (line);
fclose(Image);
diff -r aca12a61d2b1 -r 69ce6c784cae SPI_TFTx2_ILI9341.h
--- a/SPI_TFTx2_ILI9341.h Sun May 18 12:45:24 2014 +0000
+++ b/SPI_TFTx2_ILI9341.h Tue Mar 15 14:55:32 2016 +0000
@@ -1,3 +1,6 @@
+/* Rem modifie par Schneider Francois le 13/3/2016 */
+/* adapte a un seul afficheur */
+
/* mbed library for 240*320 pixel display TFT based on ILI9341 LCD Controller
* Copyright (c) 2013 Peter Drescher - DC2PD
*
@@ -93,7 +96,7 @@
* @param dc pin connected to WR of display
* the IM pins have to be set to 1110 (3-0)
*/
- SPI_TFTx2_ILI9341(PinName mosi, PinName miso, PinName sclk, PinName cs0, PinName cs1, PinName reset, PinName dc, const char* name ="TFT");
+ SPI_TFTx2_ILI9341(PinName mosi, PinName miso, PinName sclk, PinName cs0, PinName reset, PinName dc, const char* name ="TFT");
/** Get the width of the screen in pixel
*
@@ -286,7 +289,6 @@
SPI _spi;
DigitalOut _cs0;
- DigitalOut _cs1;
DigitalOut _reset;
DigitalOut _dc;
unsigned char* font;