Revision 5:9654a71f5a90, committed 2012-08-03

Comitter:

emilmont

Date:

Fri Aug 03 09:50:28 2012 +0000

Parent:

4:70bd33086f56

Commit message:

Move the RTX configuration file in the RTX library

Changed in this revision

--- a/RTX_Conf_CM.c	Mon Jul 30 10:27:24 2012 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,242 +0,0 @@
-/*----------------------------------------------------------------------------
- *      RL-ARM - RTX
- *----------------------------------------------------------------------------
- *      Name:    RTX_Conf_CM.C
- *      Purpose: Configuration of CMSIS RTX Kernel for Cortex-M
- *      Rev.:    V4.20
- *----------------------------------------------------------------------------
- *
- * Copyright (c) 1999-2009 KEIL, 2009-2012 ARM Germany GmbH
- * All rights reserved.
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *  - Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *  - Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *  - Neither the name of ARM  nor the names of its contributors may be used 
- *    to endorse or promote products derived from this software without 
- *    specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *---------------------------------------------------------------------------*/
-
-#include "cmsis_os.h"
-
-
-/*----------------------------------------------------------------------------
- *      RTX User configuration part BEGIN
- *---------------------------------------------------------------------------*/
-
-//-------- <<< Use Configuration Wizard in Context Menu >>> -----------------
-//
-// <h>Thread Configuration
-// =======================
-//
-//   <o>Number of concurrent running threads <0-250>
-//   <i> Defines max. number of threads that will run at the same time.
-//       counting "main", but not counting "osTimerThread"
-//   <i> Default: 6
-#ifndef OS_TASKCNT
-#  if defined(TARGET_LPC1768) || defined(TARGET_LPC2368)
-#    define OS_TASKCNT         14
-#  elif defined(TARGET_LPC11U24)
-#    define OS_TASKCNT         6
-#  endif
-#endif
-
-//   <o>Scheduler (+ interrupts) stack size [bytes] <64-4096:8><#/4>
-#ifndef OS_SCHEDULERSTKSIZE
-#  if defined(TARGET_LPC1768) || defined(TARGET_LPC2368)
-#      define OS_SCHEDULERSTKSIZE    256
-#  elif defined(TARGET_LPC11U24)
-#      define OS_SCHEDULERSTKSIZE    128
-#  endif
-#endif
-
-//   <o>Idle stack size [bytes] <64-4096:8><#/4>
-//   <i> Defines default stack size for the Idle thread.
-#ifndef OS_IDLESTKSIZE
- #define OS_IDLESTKSIZE         128
-#endif
-
-//   <o>Timer Thread stack size [bytes] <64-4096:8><#/4>
-//   <i> Defines stack size for Timer thread.
-//   <i> Default: 200
-#ifndef OS_TIMERSTKSZ
- #define OS_TIMERSTKSZ  WORDS_STACK_SIZE
-#endif
-
-// <q>Check for stack overflow
-// ===========================
-// <i> Includes the stack checking code for stack overflow.
-// <i> Note that additional code reduces the Kernel performance.
-#ifndef OS_STKCHECK
- #define OS_STKCHECK    1
-#endif
-
-// <q>Run in privileged mode
-// =========================
-// <i> Runs all Threads in privileged mode.
-// <i> Default: Unprivileged
-#ifndef OS_RUNPRIV
- #define OS_RUNPRIV     1
-#endif
-
-// </h>
-// <h>SysTick Timer Configuration
-// ==============================
-//
-//   <o>Timer clock value [Hz] <1-1000000000>
-//   <i> Defines the timer clock value.
-//   <i> Default: 6000000  (6MHz)
-#ifndef OS_CLOCK
-#  if defined(TARGET_LPC1768) || defined(TARGET_LPC2368)
-#    define OS_CLOCK       96000000
-#  elif defined(TARGET_LPC11U24)
-#    define OS_CLOCK       48000000
-#  endif
-#endif
-
-//   <o>Timer tick value [us] <1-1000000>
-//   <i> Defines the timer tick value.
-//   <i> Default: 1000  (1ms)
-#ifndef OS_TICK
- #define OS_TICK        1000
-#endif
-
-// </h>
-
-// <h>System Configuration
-// =======================
-//
-// <e>Round-Robin Thread switching
-// ===============================
-//
-// <i> Enables Round-Robin Thread switching.
-#ifndef OS_ROBIN
- #define OS_ROBIN       1
-#endif
-
-//   <o>Round-Robin Timeout [ticks] <1-1000>
-//   <i> Defines how long a thread will execute before a thread switch.
-//   <i> Default: 5
-#ifndef OS_ROBINTOUT
- #define OS_ROBINTOUT   5
-#endif
-
-// </e>
-
-// <e>User Timers
-// ==============
-//   <i> Enables user Timers
-#ifndef OS_TIMERS
- #define OS_TIMERS      1
-#endif
-
-//   <o>Timer Thread Priority
-//                        <1=> Low
-//                        <2=> Below Normal
-//                        <3=> Normal
-//                        <4=> Above Normal
-//                        <5=> High
-//                        <6=> Realtime
-//   <i> Defines priority for Timer Thread
-//   <i> Default: High
-#ifndef OS_TIMERPRIO
- #define OS_TIMERPRIO   5
-#endif
-
-//   <o>Timer Callback Queue size <1-32>
-//   <i> Defines number of concurrent callbacks that will be queued.
-//   <i> Default: 4
-#ifndef OS_TIMERCBQSZ
- #define OS_TIMERCBQS   4
-#endif
-
-// </e>
-
-//   <o>ISR FIFO Queue size<4=>   4 entries  <8=>   8 entries
-//                         <12=> 12 entries  <16=> 16 entries
-//                         <24=> 24 entries  <32=> 32 entries
-//                         <48=> 48 entries  <64=> 64 entries
-//                         <96=> 96 entries
-//   <i> ISR functions store requests to this buffer,
-//   <i> when they are called from the iterrupt handler.
-//   <i> Default: 16 entries
-#ifndef OS_FIFOSZ
- #define OS_FIFOSZ      16
-#endif
-
-// </h>
-
-//------------- <<< end of configuration section >>> -----------------------
-
-// Standard library system mutexes
-// ===============================
-//  Define max. number system mutexes that are used to protect 
-//  the arm standard runtime library. For microlib they are not used.
-#ifndef OS_MUTEXCNT
- #define OS_MUTEXCNT    8
-#endif
-
-/*----------------------------------------------------------------------------
- *      RTX User configuration part END
- *---------------------------------------------------------------------------*/
-
-#define OS_TRV          ((uint32_t)(((double)OS_CLOCK*(double)OS_TICK)/1E6)-1)
-
-
-/*----------------------------------------------------------------------------
- *      OS Idle daemon
- *---------------------------------------------------------------------------*/
-void os_idle_demon (void) {
-  /* The idle demon is a system thread, running when no other thread is      */
-  /* ready to run.                                                           */
-  
-  /* Sleep: ideally, we should put the chip to sleep.
-     Unfortunately, this usually requires disconnecting the interface chip (debugger).
-     This can be done, but it would break the local file system.
-  */
-  for (;;) {
-      // sleep();
-  }
-}
-
-/*----------------------------------------------------------------------------
- *      RTX Errors
- *---------------------------------------------------------------------------*/
-extern void mbed_die(void);
-
-void os_error (uint32_t err_code) {
-    /* This function is called when a runtime error is detected. Parameter     */
-    /* 'err_code' holds the runtime error code (defined in RTX_Config.h).      */
-    mbed_die();
-}
-
-void sysThreadError(osStatus status) {
-    if (status != osOK) {
-        mbed_die();
-    }
-}
-
-/*----------------------------------------------------------------------------
- *      RTX Configuration Functions
- *---------------------------------------------------------------------------*/
-
-#include "RTX_CM_lib.h"
-
-/*----------------------------------------------------------------------------
- * end of file
- *---------------------------------------------------------------------------*/

--- a/rtx.lib	Mon Jul 30 10:27:24 2012 +0000
+++ b/rtx.lib	Fri Aug 03 09:50:28 2012 +0000
@@ -1,1 +1,1 @@
-http://mbed.org/users/mbed_official/code/rtx/#11cebe4716fa
+http://mbed.org/users/mbed_official/code/rtx/#77454ed243ca