Revision 1:19313470f629, committed 2014-07-28

Comitter:

rs27

Date:

Mon Jul 28 14:36:32 2014 +0000

Parent:

0:f0fbbfdca478

Commit message:

10 PT1000 monitor

Changed in this revision

--- a/monitor.cpp	Sat Jul 26 07:27:20 2014 +0000
+++ b/monitor.cpp	Mon Jul 28 14:36:32 2014 +0000
@@ -2,19 +2,38 @@
 #include <stdarg.h>
 #include <ctype.h>
 #include "monitor.h"
+#include "ConfigFile.h"
+#include "SDFileSystem.h"
+#include "FATDirHandle.h"
 
-extern Serial pc;
-extern Buffer <char> buf;
+extern SDFileSystem sd;                 // definiert in main
+extern Serial pc;                       // definiert in main
+extern Buffer <char> buf;               // definiert in main
+extern ConfigFile cfg;                  // definiert in main
+extern char value[BUFSIZ];              // definiert in main
+
+#define COMMAND_MAX    9
+#define COMMAND_LEN    7
 
-#define COMMAND_MAX    5
-#define COMMAND_LEN    7
-const char command[COMMAND_MAX][COMMAND_LEN] = {"DATE","DUMP","HELP","SET","TIME"};
+const char command[COMMAND_MAX][COMMAND_LEN] = {"DATE","DEL","DIR","DUMP","FILL","HELP","LIST","SET","TIME"};
+
+char buffer[100]; 
+
+// globale Variablen
+
+char com_line[COM_LINE_LEN];        // Aktuelle Eingabezeile 
+uint8_t ComLinePtr, ComLineTop;     // Cursor Position und Zeilenlänge
+
+uint8_t cr_flag;
+
+// uint16_t status[8];
 
 //-----------------------------------------------------------------------------
-// destructor
+// initialisierung
 
-monitor::monitor(void)
+void mon_init(void)
 {
+
       uint8_t i;
       
       for (i = 0; i < COM_LINE_LEN; com_line[i++] = 0);
@@ -25,6 +44,7 @@
       // 1 Rohdaten ausgeben
       // 2 Temperaturwert in Float Darstellung
       
+      /*
       status[0] = 2;  // Temperaturwerte ausgeben 
       status[1] = 0;
       status[2] = 0;
@@ -33,13 +53,13 @@
       status[5] = 0;
       status[6] = 0;
       status[7] = 0;
-      
+      */
 }
 
 //-----------------------------------------------------------------------------
 // destructor
 
-void monitor::parser (void)
+void parser (void)
 {
   uint8_t i, ch, tch, top, bottom, len;
   int8_t res;
@@ -112,11 +132,16 @@
         
         switch(i)                       // Programmaufruf
         {
-          case 0: date(); break;
-          case 1: dump(); break;
-          case 2: help(); break;
-          case 3: set(); break;
-          case 4: time(); break;
+          case  0: date(); break;
+          case  1: del();  break;
+          case  2: dir();  break;
+          case  3: dump(); break;
+          case  4: fill(); break;
+          case  5: help(); break;
+          case  6: list(); break;
+          case  7: set();  break;
+          case  8: time(); break;
+          
         }                                   
   }
 }
@@ -126,7 +151,7 @@
 //-----------------------------------------------------------------------------
 // eine Zeile aus dem Eingangsbuffer lesen 
   
-void monitor::get_line(void)
+void get_line(void)
 {
     char ch;
     uint8_t i;
@@ -161,7 +186,7 @@
 //-----------------------------------------------------------------------------
 // eine Zeichen aus dem Eingangsbuffer lesen 
 
-void monitor::get_ch (void)
+void get_ch (void)
 {
     char ch;
   
@@ -197,7 +222,7 @@
 //-----------------------------------------------------------------------------
 // monitor Aufruf
 
-void monitor::date(void)
+void date(void)
 {
   pc.printf("\nin date");
 }
@@ -205,7 +230,7 @@
 //-----------------------------------------------------------------------------
 // monitor Aufruf
 
-void monitor::dump(void)
+void dump(void)
 {
   pc.printf("\nin dump");
 }
@@ -213,43 +238,192 @@
 //-----------------------------------------------------------------------------
 // monitor Aufruf
 
-void monitor::help(void)
+void help(void)
 {
   pc.printf("\n -- help ------------------------");
   pc.printf("\n set index [val] Sensor auswaehlen");
   pc.printf("\n");
+  pc.printf("\n -- files ------------------------");
+  pc.printf("\n dir  >> Dateien anzeigen");  
+  pc.printf("\n list name >> den Inhalte einer Datei anzeigen"); 
+  pc.printf("\n del name >> eine Datei loeschen"); 
+  pc.printf("\n fill name [zeilen] >> eine Datei anlegen und fuellen");        
+  pc.printf("\n");
 }
 
 //-----------------------------------------------------------------------------
 // monitor Aufruf
 
-void monitor::set(void)
+void set(void)
 {
-    int n, pos, val;
+    
+    int n;
+    char name[20], wert[20];
 
-    n = sscanf(&com_line[ComLinePtr],"%d %d",&pos,&val);
+    n = sscanf(&com_line[ComLinePtr],"%s %s",name,wert);
     
     switch (n)
     {
-      case -1: pc.printf("\nbitte index [wert] angeben");
+      case -1: pc.printf("\n list config file");
+              
+              cfg.read("/sd/input.cfg");
+              
               pc.printf("\n Index >> Sonsor 0 bis 7");
               pc.printf("\n wert  >> 0 = inaktiv, 1 = Rohwerte, 2 = errechneter Wert");
               break;
       
-      case 1: pc.printf("\nread status[%d] = %d",pos,status[pos]);
+      case 1: pc.printf("\n list config value");
+              
+              cfg.read("/sd/input.cfg");
+              
+              if (cfg.getValue(name, &value[0], sizeof(value))) 
+              {
+                pc.printf("\n'%s'='%s'", name, value);
+              }
               break;
               
-      case 2: status[pos] = val;
-              pc.printf("\nset status[%d] = %d",pos,status[pos]);
+      case 2: pc.printf("\n'%s' = '%s'",name,wert);
+               
+              cfg.setValue(name, wert);
+              cfg.write("/sd/input.cfg");
+              
               break;
      } // end switch
+    
 }
 
 //-----------------------------------------------------------------------------
 // monitor Aufruf
 
-void monitor::time(void)
+void time(void)
 {
   pc.printf("\nin timer");
 }
 
+//-----------------------------------------------------------------------------
+// monitor Aufruf dir
+//
+// weiter Infos siehe auch
+// http://elm-chan.org/fsw/ff/00index_e.html
+//
+void dir(void)
+{
+    long size;
+
+    DIR *d;
+    struct dirent *p;
+
+    d = opendir("/sd");
+    if (d != NULL) 
+    {
+        while ((p = readdir(d)) != NULL) 
+        {
+            sprintf(buffer,"/sd/%s",p->d_name);
+            pc.printf("\n %s", p->d_name);
+            FILE * f = fopen(buffer, "r");
+            fseek(f, 0, SEEK_END); // seek to end of file
+            size = ftell(f);       // get current file pointer
+            pc.printf("    %ld bytes ",size);            
+
+            time_t fattime = get_fattime();
+            strftime(buffer, 40, "%a,%d %m %Y.%H:%M:%S", localtime(&fattime));
+            pc.printf(" %s ", buffer);
+
+            fclose(f);
+        }
+        
+    }
+    else 
+    {
+        pc.printf("\nCould not open directory!\n");
+    }
+    closedir(d);
+    
+ 
+    FATFS* fs;
+    DWORD fre_clust;
+    f_getfree("0:",&fre_clust,&fs);
+    const float frs = float(fs->csize)*float(fs->free_clust)
+    #if _MAX_SS != 512
+        *(fs->ssize);
+    #else
+        *512;
+    #endif
+    pc.printf("\n\nfree space = %f GB",frs/1073741824.0);
+
+    pc.printf("\ndone\n");
+}
+
+//-----------------------------------------------------------------------------
+// monitor Aufruf list
+
+void list(void)
+{
+    char dname[25];
+    int ch;
+      
+    sscanf(&com_line[ComLinePtr],"%s",dname);
+    sprintf(buffer,"/sd/%s",dname);
+    pc.printf("\nlist, file %s \n",buffer);
+    FILE * fp = fopen(buffer, "r");
+    if(fp == NULL) 
+    {
+        pc.printf("\nCould not open file for read\n\r");
+        return;
+    }
+    
+    // mit fgets werden die Zeile einzeln gelesen, wenn die Länge < 64 Zeichen ist
+
+    while (1)                     // list src to pc  
+    {
+        ch = fgetc(fp);           // until src EOF read. 
+        if (ch == EOF) break;
+        pc.putc(ch);  
+    }
+    
+    fclose(fp);
+            
+    pc.printf("\ndone\n");
+}
+
+//-----------------------------------------------------------------------------
+// monitor Aufruf del
+
+void del(void)
+{
+    char dname[25];
+    char buffer[40];
+    
+    sscanf(&com_line[ComLinePtr],"%s",dname);
+    sprintf(buffer,"/sd/%s",dname);
+    pc.printf("\ndelete file %s",buffer);
+    remove(buffer);
+    pc.printf("\ndone");
+}
+
+//-----------------------------------------------------------------------------
+// monitor Aufruf fill
+
+void fill(void)
+{
+    char dname[25];
+    char buffer[40];
+    int n = 20;
+    
+    sscanf(&com_line[ComLinePtr],"%s %d",dname,&n);
+    sprintf(buffer,"/sd/%s",dname);
+    pc.printf("\nfill file %s \n",buffer);
+    FILE *fp = fopen(buffer, "w");
+    if(fp == NULL) 
+    {
+        pc.printf("Could not open file for write\n");
+    }
+    for (int i = 0; i<n; i++)
+    {
+        fprintf(fp, "\nschreibe eine Zeile %d ",i);
+    }
+    fclose(fp); 
+    pc.printf("\ndone\n");
+}
+
+

--- a/monitor.h	Sat Jul 26 07:27:20 2014 +0000
+++ b/monitor.h	Mon Jul 28 14:36:32 2014 +0000
@@ -1,3 +1,6 @@
+
+#ifndef MONITOR_H
+#define MONITOR_H
 
 #include <string.h>
 #include "mbed.h"
@@ -5,28 +8,20 @@
 
 #define COM_LINE_LEN 100
 
-class monitor
-{
-  private:
-  
-        
-  public:
-      
-     char com_line[COM_LINE_LEN];              // Aktuelle Eingabezeile 
-     uint8_t ComLinePtr, ComLineTop;     // Cursor Position und Zeilenlänge
-     
-     uint8_t cr_flag;
-  
-     uint16_t status[8];
-     
-     monitor(void);  
-     void parser (void);
-     void get_line(void);
-     void get_ch (void);
-     
-     void date(void);
-     void dump(void);
-     void help(void);
-     void set(void);
-     void time(void);
-  };
\ No newline at end of file
+ void mon_init(void);
+ 
+ void parser (void);
+ void get_line(void);
+ void get_ch (void);
+ 
+ void date(void);
+ void dump(void);
+ void help(void);
+ void set(void);
+ void time(void);
+ void dir(void);
+ void list(void);    
+ void del(void);
+ void fill(void);
+
+#endif
\ No newline at end of file