Revision 0:61a21e393e36, committed 2017-11-12

Comitter:

roger5641

Date:

Sun Nov 12 01:22:00 2017 +0000

Commit message:

ver1

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/UserInterface.cpp	Sun Nov 12 01:22:00 2017 +0000
@@ -0,0 +1,118 @@
+//! @todo Review this file.
+/*
+UserInterface.cpp
+
+UserInterface routines are used to read and write user data through the Arduino's
+serial interface.
+
+Copyright (c) 2013, Linear Technology Corp.(LTC)
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+The views and conclusions contained in the software and documentation are those
+of the authors and should not be interpreted as representing official policies,
+either expressed or implied, of Linear Technology Corp.
+
+The Linear Technology Linduino is not affiliated with the official Arduino team.
+However, the Linduino is only possible because of the Arduino team's commitment
+to the open-source community.  Please, visit http://www.arduino.cc and
+http://store.arduino.cc , and consider a purchase that will help fund their
+ongoing work.
+*/
+#include "UserInterface.h"
+
+char ui_buffer[UI_BUFFER_SIZE];
+
+// Read data from the serial interface into the ui_buffer
+uint8_t read_data()
+{
+  uint8_t index = 0; //index to hold current location in ui_buffer
+  int c; // single character used to store incoming keystrokes
+  while (index < UI_BUFFER_SIZE-1)
+  {
+    c = pc.getc(); //read one character
+    if (((char) c == '\r') || ((char) c == '\n')) break; // if carriage return or linefeed, stop and return data
+    if ( ((char) c == '\x7F') || ((char) c == '\x08') )   // remove previous character (decrement index) if Backspace/Delete key pressed      index--;
+    {
+      if (index > 0) index--;
+    }
+    else if (c >= 0)
+    {
+      ui_buffer[index++]=(char) c; // put character into ui_buffer
+    }
+  }
+  ui_buffer[index]='\0';  // terminate string with NULL
+
+  if ((char) c == '\r')    // if the last character was a carriage return, also clear linefeed if it is next character
+  {
+    wait_ms(10);  // allow 10ms for linefeed to appear on serial pins
+//    if (pc.peek() == '\n') 
+    pc.getc(); // if linefeed appears, read it and throw it away
+  }
+
+  return index; // return number of characters, not including null terminator
+}
+
+// Read a float value from the serial interface
+float read_float()
+{
+  float data;
+  read_data();
+  data = atof(ui_buffer);
+  return(data);
+}
+
+// Read an integer from the serial interface.
+// The routine can recognize Hex, Decimal, Octal, or Binary
+// Example:
+// Hex:     0x11 (0x prefix)
+// Decimal: 17
+// Octal:   021 (leading zero prefix)
+// Binary:  B10001 (leading B prefix)
+int32_t read_int()
+{
+  int32_t data;
+  read_data();
+  if (ui_buffer[0] == 'm')
+    return('m');
+  if ((ui_buffer[0] == 'B') || (ui_buffer[0] == 'b'))
+  {
+    data = strtol(ui_buffer+1, NULL, 2);
+  }
+  else
+    data = strtol(ui_buffer, NULL, 0);
+  return(data);
+}
+
+// Read a string from the serial interface.  Returns a pointer to the ui_buffer.
+char *read_string()
+{
+  read_data();
+  return(ui_buffer);
+}
+
+// Read a character from the serial interface
+int8_t read_char()
+{
+  read_data();
+  return(ui_buffer[0]);
+}
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/UserInterface.h	Sun Nov 12 01:22:00 2017 +0000
@@ -0,0 +1,76 @@
+//! @todo Review this file.
+/*
+UserInterface.h
+
+UserInterface routines are used to read and write user data through the Arduino's
+serial interface.
+
+Copyright (c) 2013, Linear Technology Corp.(LTC)
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+The views and conclusions contained in the software and documentation are those
+of the authors and should not be interpreted as representing official policies,
+either expressed or implied, of Linear Technology Corp.
+
+The Linear Technology Linduino is not affiliated with the official Arduino team.
+However, the Linduino is only possible because of the Arduino team's commitment
+to the open-source community.  Please, visit http://www.arduino.cc and
+http://store.arduino.cc , and consider a purchase that will help fund their
+ongoing work.
+*/
+
+#ifndef USERINTERFACE_H
+#define USERINTERFACE_H
+
+#include "mbed.h"
+
+#define UI_BUFFER_SIZE 64
+#define SERIAL_TERMINATOR '\n'
+
+Serial pc(USBTX,USBRX);
+
+// io buffer
+extern char ui_buffer[UI_BUFFER_SIZE];
+
+// Read data from the serial interface into the ui_buffer buffer
+uint8_t read_data();
+
+// Read a float value from the serial interface
+float read_float();
+
+// Read an integer from the serial interface.
+// The routine can recognize Hex, Decimal, Octal, or Binary
+// Example:
+// Hex:     0x11 (0x prefix)
+// Decimal: 17
+// Octal:   O21 (leading letter O prefix)
+// Binary:  B10001 (leading letter B prefix)
+int32_t read_int();
+
+// Read a string from the serial interface.  Returns a pointer to the ui_buffer.
+char *read_string();
+
+// Read a character from the serial interface
+int8_t read_char();
+
+#endif  // USERINTERFACE_H
\ No newline at end of file