Revision 20:7466373c9234, committed 2017-12-06

Comitter:

roborags

Date:

Wed Dec 06 22:54:33 2017 +0000

Parent:

19:ffd78d964d9f

Commit message:

BLE Mesh Light Sensor to FRDMK64F

Changed in this revision

--- a/DHT.lib	Mon Sep 04 18:06:20 2017 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +0,0 @@
-https://mbed.org/users/Wimpie/code/DHT/#889f3dd5275a

--- a/ESP8266.lib	Mon Sep 04 18:06:20 2017 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +0,0 @@
-https://mbed.org/users/quevedo/code/ESP8266/#77388e8f0697

--- a/GT511C3.lib	Mon Sep 04 18:06:20 2017 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +0,0 @@
-https://mbed.org/users/tosihisa/code/GT511C3/#90c64cb9db58

--- a/main.cpp	Mon Sep 04 18:06:20 2017 +0000
+++ b/main.cpp	Wed Dec 06 22:54:33 2017 +0000
@@ -1,207 +1,35 @@
 
 #include "mbed.h"
-#include "ESP8266.h"               // Include header file from Author: Antonio Quevedo
 #include "math.h"
-#include "DHT.h"
-#include "GT511C3.hpp"
 #include <string>
 
-#define APIKEY JJAOBK32WOINKT00    //Put "Write key" of your channel in thingspeak.com 
-#define IP "184.106.153.149"       // IP Address of "api.thingspeak.com\"
-#define WIFI_SSID "Redmi"
-#define WIFI_PASS "akash12345"
-#define FPS_ENROLL_PASS "Rags\n"
-
 Serial FRDM_UART_Debug(USBTX,USBRX);
-
-ESP8266 ESP_8266_UART(PTC15, PTC14, 115200); // UART for ESP8266 Wifi module
-// Options are TX-RX - PTB11 - PTB10 , PTC17 - PTC16 , PTC15 - PTC14
-
-SPI SPI_Bus(PTD2,PTD3,PTD1); // (MOSI MISO CLK)setup SPI interface
-DigitalOut SPI_CS_AMM(PTA2);
-DigitalOut SPI_CS_VOLT(PTB9);
-
+Serial FRDM_Data_Tx(PTC17,PTC16);
 I2C I2C_Bus(PTE25,PTE24);
 
-AnalogIn AN_Thermo(PTB2); // Thermocouple Analog Input
-
-DigitalIn DG_Motion(PTC2); // Motion module Digital Input
-
-DHT DHT_Temp_Hum(PTC4,DHT22); //DHT Sensor
-
-GT511C3 FPS(PTC17, PTC16);
 
 const int Light_I2C_Addr = 0x88;
-
-char ESP_8266_CMD_Send[255],ESP_8266_CMD_Recv[1000];           //ESP_8266_CMD_Send = string used to send command to ESP8266 &  ESP_8266_CMD_Recv = string used to receive response from ESP8266
+float Light_Out = 0;
 
-float Amm_Out = 0;
-float Volt_Out = 0;
-float Light_Out = 0;
-float Thermo_Out = 0;
-float Temp_Out = 0;
-float Hum_Out = 0;
-int Motion_Out = 0;
-int Finger_Out = 0;
-float Pres_Out = 0;
-bool FPS_Auth = false;
-
-
-void ESP_8266_Init(void); // Function used to initialize ESP8266 wifi module 
-void ESP_8266_TX_Data(void);       // Function used to connect with thingspeak.com and update channel using ESP8266 wifi module 
-void FPS_Func(void);
-int FPS_Wait_Time(int press,bool Det_Mot, unsigned long *ms_time);
 
 int main() 
 {
-    int SPI_High_byte = 0;
-    int SPI_Low_byte = 0; 
-    float Temp_f_1 = 0.00;
-    float Temp_f_2 = 0.00;
-    int Temp_i_1 = 0;
-    int Temp_i_2 = 0;
-    int Temp_i_3 = 0;
-    int Temp_i_4 = 0;
-    char I2C_Cmd[3];
-    int loop_count = 0;
-    int FPS_Ret = 0;
-    int FPS_Attempt = 1;
-    int FPS_Enroll_ID = 0;
-    unsigned long FPS_Param = 0;
-    unsigned short FPS_Resp = 0;
-    char FPS_Enroll_Pass[20];
-    unsigned long FPS_Delay = 0;
     
     FRDM_UART_Debug.baud(115200);           // Baud rate used for communicating with Tera-term on PC
-    
-    ESP_8266_Init();
-    
-    SPI_Bus.format(8,0);
-    SPI_Bus.frequency(1000000);
+    FRDM_Data_Tx.baud(115200);
     
     I2C_Bus.frequency(100000); // set required i2c frequency
     
-    FPS_Ret = FPS.Open();
-    if(FPS_Ret == -1)
-    {
-        FRDM_UART_Debug.printf("FPS NACK Open\r\n");  
-    }
-    else
-    {
-        FRDM_UART_Debug.printf("FPS Init\r\n");  
-        FRDM_UART_Debug.printf("FPS F/W = %d , ISO_Size = %d , Serial Num = %s\r\n",FPS.FirmwareVersion,FPS.IsoAreaMaxSize,FPS.DeviceSerialNumber);  
-    }      
-    
-    FPS_Ret = FPS.CmosLed(1);
-    if(FPS_Ret == -1)
-    {
-        FRDM_UART_Debug.printf("FPS NACK LED Set\r\n");  
-    }
-
-    wait(1);
-    
-    if(DG_Motion == 1)
-    {
-        FRDM_UART_Debug.printf("Motion detected, press Finger within 5 seconds to Start\r\n");  
-        
-        FPS_Delay = 5000;
-        FPS_Ret = FPS_Wait_Time(1,false,&FPS_Delay);
-        if(FPS_Ret == 1)
-        {
-            FPS_Func();
-        }
-    }
-    FRDM_UART_Debug.printf("Start sampling data\r\n");  // Starting point
-    
     while (1) 
     {
-        Amm_Out = 0;
-        Volt_Out = 0;
-        Light_Out = 0;
-        Thermo_Out = 0;
-        Temp_Out = 0;
-        Hum_Out = 0;
-        Motion_Out = 0;
-        
-        // Copy Motion values
-        
-        Motion_Out = DG_Motion;
-        
-        // Ammeter
-        
-        SPI_High_byte = 0;
-        SPI_Low_byte = 0; 
-        Temp_f_1 = 0.00;
-        Temp_f_2 = 0.00;
-        Temp_i_1 = 0;
-        Temp_i_2 = 0;
-        Temp_i_3 = 0;
-        I2C_Cmd[0] = 0;
-        I2C_Cmd[1] = 0;
-        I2C_Cmd[2] = 0;
-        loop_count = 0;
-        
-        SPI_CS_AMM = 0;
-        
-        SPI_High_byte = SPI_Bus.write(0);
-        SPI_Low_byte = SPI_Bus.write(0);
-        
-        SPI_CS_AMM = 1;
-        
-        Temp_f_1 = (( SPI_High_byte & 0x1F ) << 7 ) | (( SPI_Low_byte >> 1 ));
-            
-        Temp_f_2= (float)(( Temp_f_1 * 1.00 ) / 4096.00 ); // Converting to volts
-        
-        Amm_Out = (float)(( Temp_f_2 - 0.50 ) * 1000.00);
-        
-        if(FPS_Auth)
-            FRDM_UART_Debug.printf("Current value = %f mA\r\n", Amm_Out);
-        wait_ms(100);
+       
+        uint16_t Light = 0;
         
-        // Voltmeter
-        
-        SPI_High_byte = 0;
-        SPI_Low_byte = 0; 
-        Temp_f_1 = 0.00;
-        Temp_f_2 = 0.00;
-        Temp_i_1 = 0;
-        Temp_i_2 = 0;
-        Temp_i_3 = 0;
-        I2C_Cmd[0] = 0;
-        I2C_Cmd[1] = 0;
-        I2C_Cmd[2] = 0;
-        loop_count = 0;  
-        
-        SPI_CS_VOLT = 0;
-
-        SPI_High_byte = SPI_Bus.write(0);
-        SPI_Low_byte = SPI_Bus.write(0);
-        
-        SPI_CS_VOLT = 1;
-        
-        Temp_f_1 = ((SPI_High_byte & 0x1f) << 7) | ((SPI_Low_byte >> 1));
-        
-        Temp_f_2 = (float)((Temp_f_1 * 33) / 4096); // show value in volts.
-        
-        Volt_Out = (float)(Temp_f_2 - 16.5);
-        
-        if(FPS_Auth)
-            FRDM_UART_Debug.printf("Voltage value = %f V\r\n", Volt_Out);
-        wait_ms(100);
-        
-         //ambient light 
-         
-        SPI_High_byte = 0;
-        SPI_Low_byte = 0; 
-        Temp_f_1 = 0.00;
-        Temp_f_2 = 0.00;
-        Temp_i_1 = 0;
-        Temp_i_2 = 0;
-        Temp_i_3 = 0;
-        I2C_Cmd[0] = 0;
-        I2C_Cmd[1] = 0;
-        I2C_Cmd[2] = 0;
-        loop_count = 0;
+        char I2C_Cmd[3];
+        int Temp_i_1 = 0;
+        int Temp_i_2 = 0;
+        int Temp_i_3 = 0;
+        int loop_count = 0;
         
         I2C_Cmd[0] = 0x01;   //configuration register
         I2C_Cmd[1]= 0xCC;    //configuration data
@@ -224,516 +52,12 @@
         
         Light_Out= (Temp_i_2 * Temp_i_3) / 100;
         
-        if(FPS_Auth)
-            FRDM_UART_Debug.printf("Lux = %.2f\n\r", Light_Out);  
-        wait_ms(100); 
-        
-        // Thermocouple
-        
-        SPI_High_byte = 0;
-        SPI_Low_byte = 0; 
-        Temp_f_1 = 0.00;
-        Temp_f_2 = 0.00;
-        Temp_i_1 = 0;
-        Temp_i_2 = 0;
-        Temp_i_3 = 0;
-        I2C_Cmd[0] = 0;
-        I2C_Cmd[1] = 0;
-        I2C_Cmd[2] = 0;
-        loop_count = 0;
-        
-        Temp_f_1 = AN_Thermo.read_u16();
-        
-        Temp_f_1 = (( Temp_f_1 / 65536 ) * 330);
-        
-        Thermo_Out = Temp_f_1;
-        
-        if(FPS_Auth)
-            FRDM_UART_Debug.printf("Thermocouple volt diff = %.2f C\r\n",Thermo_Out);
-        wait_ms(100); 
-        
-        // Temp and Humidity
-        
-        SPI_High_byte = 0;
-        SPI_Low_byte = 0; 
-        Temp_f_1 = 0.00;
-        Temp_f_2 = 0.00;
-        Temp_i_1 = 0;
-        Temp_i_2 = 0;
-        Temp_i_3 = 0;
-        I2C_Cmd[0] = 0;
-        I2C_Cmd[1] = 0;
-        I2C_Cmd[2] = 0;
-        loop_count = 0;
-        
-        Temp_i_1 = DHT_Temp_Hum.readData();
-        if (Temp_i_1 == 0)  // Read success
-        {
-            //wait_ms(1000);
-            Temp_f_1 = DHT_Temp_Hum.ReadTemperature(FARENHEIT);
-            Temp_f_2 = DHT_Temp_Hum.ReadHumidity();
-        }
-        else // Read failure
-        {
-            Temp_f_1 = 0;
-            Temp_f_2 = 0;
-        }
-        
-        Temp_Out = Temp_f_1;
-        Hum_Out = Temp_f_2;
-        
-        if(FPS_Auth)
-            FRDM_UART_Debug.printf("Temperature = %4.2f F ,  Humidity = %4.2f \r\n",Temp_Out,Hum_Out);
-        wait_ms(100); 
-        
-        //if(FPS_Auth)
-        FRDM_UART_Debug.printf("Sending Data to Server\r\n");
-        ESP_8266_TX_Data(); 
-        
-        FPS_Delay = 15000;
-        
-FPS_Check_Again:        
-        FPS_Ret = FPS_Wait_Time(1,true,&FPS_Delay);
-        if(FPS_Ret == 1)
-        {
-            FRDM_UART_Debug.printf("Motion detected, press Finger within %d seconds to Authenticate and display data\r\n",FPS_Delay/1000);  
-            FPS_Ret = FPS_Wait_Time(1,false,&FPS_Delay);
-            if(FPS_Ret == 1)
-            {
-                FPS_Func();
-                goto FPS_Check_Again;
-            }
-            else if(FPS_Delay > 99)
-            {
-                FRDM_UART_Debug.printf("Remaining delay is %d\r\n",FPS_Delay);
-                goto FPS_Check_Again;
-            }
-        }
-        else if(FPS_Delay > 99)
-        {
-            FRDM_UART_Debug.printf("Remaining delay is %d\r\n",FPS_Delay);
-            goto FPS_Check_Again;
-        }
-
-        //wait(15);
-        
-    }
-}
-
-int FPS_Wait_Time(int press,bool Det_Mot, unsigned long *ms_time)
-{
-    for(;*ms_time>99;)
-    {
-        if((FPS.IsPress() == press) || ((Det_Mot == true) && (DG_Motion == 1)))
-            return 1;
-        else
-        {
-            *ms_time-=100;
-            wait_ms(100);
-        }
-    }
-    return 0;
-    /*
-    for(;(FPS.IsPress() != press);wait_ms(100),*ms_time-=100);
-    if(*ms_time >= 99)
-        return 1;
-    else
-        return 0;
-    */
-}
-
-void FPS_Func(void)
-{
-    int Temp_i_1 = 0;
-    int Temp_i_2 = 0;
-    int Temp_i_3 = 0;
-    int Temp_i_4 = 0;
-    int loop_count = 0;
-    int FPS_Ret = 0;
-    int FPS_Attempt = 1;
-    int FPS_Enroll_ID = 0;
-    unsigned long FPS_Param = 0;
-    unsigned short FPS_Resp = 0;
-    unsigned long FPS_Delay = 0;
-    char FPS_Enroll_Pass[20];
-    
-    FRDM_UART_Debug.printf("FPS Select Option:\r\n1. Verify ID \r\n2. Enroll ID\r\n3. Delete ID \r\n4. Quit \r\n"); 
-    FRDM_UART_Debug.scanf("%d",&Temp_i_4);
-    
-    switch(Temp_i_4)
-    {
-        case 1:
-        
-            FRDM_UART_Debug.printf("FPS VERIFICATION\r\n"); 
-            FRDM_UART_Debug.printf("FPS Press finger to start\r\n"); 
-            
-            FPS_Delay = 10000;
-            FPS_Wait_Time(1,false,&FPS_Delay);
-            
-            //Verify 
-            FPS_Ret = FPS.Capture(1);
-            if(FPS_Ret == -1)
-            {
-                FRDM_UART_Debug.printf("FPS Verification failed, place finger properly\r\n");  
-                FPS_Auth = false;
-                goto loop_end;
-            }
-            
-            FRDM_UART_Debug.printf("FPS Captured\r\n");  
-            
-            FPS_Ret = FPS.Identify();
-            if(FPS_Ret != -1)
-            {
-                FRDM_UART_Debug.printf("FPS Authentication PASSED with ID = %d \r\n",FPS_Ret); 
-                FPS_Auth = true;
-                goto loop_end;
-            }
-            else
-            {
-                FRDM_UART_Debug.printf("FPS Authentication FAILED \r\n"); 
-                FPS_Auth = false;
-                goto loop_end;    
-            }
-        break;
-        
-        case 2:
-            FRDM_UART_Debug.printf("FPS ENROLL\r\n"); 
-
-            for(FPS_Attempt = 3;FPS_Attempt >= 1;FPS_Attempt --)
-            {
-                FRDM_UART_Debug.printf("FPS Enter Enroll passoword\r\n"); 
-                FRDM_UART_Debug.scanf("%s",&FPS_Enroll_Pass[0]); 
-                
-                if(FPS_Enroll_Pass == FPS_ENROLL_PASS)
-                {
-                   FRDM_UART_Debug.printf("FPS Wrong Enroll passoword %d attempts left\r\n",FPS_Attempt);     
-                }
-                else
-                    break;
-            }
-
-            if(FPS_Attempt < 1)
-            {
-                FRDM_UART_Debug.printf("FPS Enroll Password authentication failed \r\n"); 
-                goto loop_end;
-            }
-
-            FRDM_UART_Debug.printf("FPS Enroll passoword Authenticated\r\n");
+        Light  = Light_Out;
             
-            for(FPS_Enroll_ID = 0; FPS_Enroll_ID <20 ;FPS_Enroll_ID++)
-            {
-                FPS_Ret = FPS.CheckEnrolled(FPS_Enroll_ID);
-                if(FPS_Ret == 0)      
-                    continue;
-                else
-                    break;
-            }
-
-            FRDM_UART_Debug.printf("FPS Enroll ID %d\r\n",FPS_Enroll_ID);
-
-            if(FPS_Enroll_ID < 20)
-            {
-                FRDM_UART_Debug.printf("FPS Starting enrolling, place finger on Sensor when LED glows\r\n");
-                
-                FPS_Ret = FPS.CmosLed(0);
-                if(FPS_Ret == -1)
-                {
-                    FRDM_UART_Debug.printf("FPS Enroll Failed try again\r\n"); 
-                    goto loop_end;
-                }
-                    
-                FPS_Param = FPS_Enroll_ID;
-                
-                FPS_Ret = FPS.SendRecv(FPS.CMD_EnrollStart,&FPS_Param,&FPS_Resp);
-                if((FPS_Ret != 0) || (FPS_Resp != FPS.CMD_Ack))
-                {
-                    FRDM_UART_Debug.printf("FPS Enroll Failed try again\r\n"); 
-                    goto loop_end;
-                }
-                
-                Temp_i_1 = 1;
-                
-                for(Temp_i_2 = 1;Temp_i_2 < 10 ; Temp_i_2++)
-                {
-                    for(;Temp_i_1 <= 3 ; Temp_i_1++,Temp_i_2 = 1)
-                    {
-                        FPS_Delay = 10000;
-                        FPS_Wait_Time(0,false,&FPS_Delay);
-                        
-                        FPS_Ret = FPS.CmosLed(1);
-                        if(FPS_Ret == -1)
-                        {
-                            FRDM_UART_Debug.printf("FPS Enroll Failed trying again\r\n"); 
-                            continue;
-                        }
-                        
-                        for(Temp_i_3 = 1;Temp_i_3 <= 10;Temp_i_3++)
-                        {
-                        
-                            FRDM_UART_Debug.printf("FPS Place finger on Sensor NOW %d\r\n",Temp_i_1);
-                            FPS_Delay = 10000;
-                            FPS_Wait_Time(1,false,&FPS_Delay);
-                            
-                            if(FPS.Capture(1) == 0)
-                                break;
-                                
-                            wait_ms(500);
-                        }
-                        
-                        if(Temp_i_2 > 10)
-                        {
-                            FRDM_UART_Debug.printf("FPS Enroll Failed trying again\r\n"); 
-                            continue;
-                        }   
-
-                        FPS_Ret = FPS.Enroll_N(Temp_i_1);
-                        if(FPS_Ret != 0)
-                        {
-                            FRDM_UART_Debug.printf("FPS Enroll Failed trying again\r\n"); 
-                            continue;
-                        }
-                            
-                        FPS_Ret = FPS.CmosLed(0);
-                        if(FPS_Ret == -1)
-                        {
-                            FRDM_UART_Debug.printf("FPS Enroll Failed trying again\r\n"); 
-                            continue;
-                        }
-                        
-                        FRDM_UART_Debug.printf("FPS REMOVE finger on Sensor NOW\r\n");      
-                    }
-                }
-                
-                FPS_Ret = FPS.CheckEnrolled(FPS_Enroll_ID);
-                if(FPS_Ret == 0)     
-                {
-                    FRDM_UART_Debug.printf("FPS Enroll PASSED\r\n");       
-                    goto loop_end;
-                }
-                else
-                {
-                    FRDM_UART_Debug.printf("FPS Enroll FAILED\r\n");       
-                    goto loop_end;                       
-                }
-            }
-            else
-            {
-                FRDM_UART_Debug.printf("FPS All ID's are full, swithcing to ID delete mode\r\n");
-                goto delete_fps_id;
-            }
-        break;
+        FRDM_Data_Tx.printf("%d\n",Light);
+        FRDM_UART_Debug.printf("Lux = %.2f\n\r", Light_Out);
         
-        case 3:
-            // Delete ID 
-delete_fps_id:                  
-            FRDM_UART_Debug.printf("FPS DELETE ID, enter option select\r\n1. Delete specific ID \r\n2. Delete All \r\n3. Quit\r\n");
-            FRDM_UART_Debug.scanf("%d",&Temp_i_1); 
-            
-            switch (Temp_i_1)
-            {
-                case 1:
-                case 2:
-                        for(FPS_Attempt = 3;FPS_Attempt >= 1;FPS_Attempt --)
-                        {
-                            FRDM_UART_Debug.printf("FPS Enter Enroll passoword\r\n"); 
-                            FRDM_UART_Debug.scanf("%s",&FPS_Enroll_Pass[0]); 
-                            
-                            if(FPS_Enroll_Pass == FPS_ENROLL_PASS)
-                            {
-                               FRDM_UART_Debug.printf("FPS Wrong Enroll passoword %d attempts left\r\n",FPS_Attempt);     
-                            }
-                            else
-                                break;
-                        }
-                        
-                        FRDM_UART_Debug.printf("FPS Password Authenticated\r\n");
-                        
-                        if(Temp_i_1 == 1)
-                        {
-                            FRDM_UART_Debug.printf("FPS Enter ID to delete\r\n");
-                            FRDM_UART_Debug.scanf("%d",&Temp_i_2);
-                            
-                            
-                            FPS_Ret = FPS.DeleteID(Temp_i_2);
-                            if(FPS_Ret != 0)
-                            {
-                                FRDM_UART_Debug.printf("FPS Unable to delete ID %d\r\n",Temp_i_2); 
-                                break;
-                            }
-                            else
-                                FRDM_UART_Debug.printf("FPS ID %d has been deleted\r\n",Temp_i_2); 
-                        }
-                        else if(Temp_i_1 == 2)
-                        {
-                            for(FPS_Enroll_ID = 0; FPS_Enroll_ID <20 ;FPS_Enroll_ID++)
-                            {
-                                FPS_Ret = FPS.DeleteID(FPS_Enroll_ID);
-                            }
-                            
-                            for(FPS_Enroll_ID = 0; FPS_Enroll_ID <20 ;FPS_Enroll_ID++)
-                            {
-                                FPS_Ret = FPS.CheckEnrolled(FPS_Enroll_ID);
-                                if(FPS_Ret != 0)      
-                                    continue;
-                                else
-                                    break;
-                            }
-                
-                            if(FPS_Enroll_ID == 20)
-                            {
-                                FRDM_UART_Debug.printf("FPS All ID's deleted\r\n");
-                            }
-                            else
-                            {
-                                FRDM_UART_Debug.printf("FPS Delete ALL failed at ID %d\r\n",FPS_Enroll_ID); 
-                            }
-                        }
-                            
-                    break;
-                case 3:
-                default:
-                    goto loop_end;
-                    break;      
-            } 
-                
-        break;
-        
-        case 4:
-        default:
-                goto loop_end;
-    }   
-loop_end:
-    FRDM_UART_Debug.printf("FPS Loop End reached\r\n");    
-    
-    FPS_Ret = FPS.CmosLed(1);
-    if(FPS_Ret == -1)
-    {
-        FRDM_UART_Debug.printf("FPS LED ON Failed Loop End\r\n"); 
-        //continue;
-    }            
- 
-}
-    
-
-
-void ESP_8266_Init(void)
-{    
-    FRDM_UART_Debug.printf("Initializing and Reset ESP\r\n"); 
-      
-    ESP_8266_UART.Reset();                   //RESET ESP
-    ESP_8266_UART.RcvReply(ESP_8266_CMD_Recv, 400);        //receive a response from ESP
-    //if(FPS_Auth)
-        //FRDM_UART_Debug.printf(ESP_8266_CMD_Recv);          //Print the response onscreen 
-    wait(2);
-    
-    strcpy(ESP_8266_CMD_Send,"AT");
-    ESP_8266_UART.SendCMD(ESP_8266_CMD_Send);
-    if(FPS_Auth)
-        FRDM_UART_Debug.printf(ESP_8266_CMD_Send);
-    //wait(2);
-    ESP_8266_UART.RcvReply(ESP_8266_CMD_Recv, 400);       
-    if(FPS_Auth)
-        FRDM_UART_Debug.printf(ESP_8266_CMD_Recv);      
-    wait(0.1);
-    
-    strcpy(ESP_8266_CMD_Send,"AT+CWMODE=1");
-    ESP_8266_UART.SendCMD(ESP_8266_CMD_Send);
-    if(FPS_Auth)
-        FRDM_UART_Debug.printf(ESP_8266_CMD_Send);
-    wait(2);
-    
-    
-    if(!strcmp(ESP_8266_CMD_Recv,"WIFI CONNECTED"))
-    {
-        strcpy(ESP_8266_CMD_Send,"AT+CWJAP=\"");
-        strcat(ESP_8266_CMD_Send,WIFI_SSID);
-        strcat(ESP_8266_CMD_Send,"\",\"");
-        strcat(ESP_8266_CMD_Send,WIFI_PASS);
-        strcat(ESP_8266_CMD_Send,"\"");
-    
-        ESP_8266_UART.SendCMD(ESP_8266_CMD_Send);
-        //if(FPS_Auth)
-            FRDM_UART_Debug.printf(ESP_8266_CMD_Send);
         wait(5);
-        ESP_8266_UART.RcvReply(ESP_8266_CMD_Recv, 400);       
-        //if(FPS_Auth)
-            FRDM_UART_Debug.printf(ESP_8266_CMD_Recv); 
+         
     }
-    else 
-       FRDM_UART_Debug.printf("Wifi was preconfigured\r\n"); 
-        
-    strcpy(ESP_8266_CMD_Send,"AT+CIPMUX=0");
-    ESP_8266_UART.SendCMD(ESP_8266_CMD_Send);
-    //if(FPS_Auth)
-        FRDM_UART_Debug.printf(ESP_8266_CMD_Send);
-    //wait(2);
-    ESP_8266_UART.RcvReply(ESP_8266_CMD_Recv, 400);       
-    //if(FPS_Auth)
-        FRDM_UART_Debug.printf(ESP_8266_CMD_Recv); 
-
-}
-
-void ESP_8266_TX_Data(void)
-{
-   
-    //ESP updates the Status of Thingspeak channel//
-    
-    strcpy(ESP_8266_CMD_Send,"AT+CIPSTART=");
-    strcat(ESP_8266_CMD_Send,"\"TCP\",\"");
-    strcat(ESP_8266_CMD_Send,IP);
-    strcat(ESP_8266_CMD_Send,"\",80");
-    
-    ESP_8266_UART.SendCMD(ESP_8266_CMD_Send); 
-    if(FPS_Auth)
-        FRDM_UART_Debug.printf("S\r\n%s",ESP_8266_CMD_Send);
-    //wait(2);                                                    
-    ESP_8266_UART.RcvReply(ESP_8266_CMD_Recv, 1000);
-    if(FPS_Auth)
-        FRDM_UART_Debug.printf("R\r\n%s",ESP_8266_CMD_Recv);
-    wait(1);
-    
-    /*
-        float Amm_Out = 0;
-        float Volt_Out = 0;
-        float Light_Out = 0;
-        float Thermo_Out = 0;
-        float Temp_Out = 0;
-        float Hum_Out = 0;
-        int Motion_Out = 0;
-    */
-    sprintf(ESP_8266_CMD_Send,"GET https://api.thingspeak.com/update?key=JJAOBK32WOINKT00&field1=%d&field2=%d&field3=%f&field4=%f&field5=%f&field6=%f&field7=%f&field8=%f\r\n"
-            ,Motion_Out,Finger_Out,Amm_Out,Volt_Out,Light_Out,Thermo_Out,Temp_Out,Hum_Out);
-    
-    int i=0;
-    for(i=0;ESP_8266_CMD_Send[i]!='\0';i++);
-    i++;
-    char cmd[255];
-    
-    sprintf(cmd,"AT+CIPSEND=%d",i);                                       //Send Number of open connection and Characters to send 
-    ESP_8266_UART.SendCMD(cmd);
-    if(FPS_Auth)
-        FRDM_UART_Debug.printf("S\r\n%s",cmd);
-    while(i<=20 || ESP_8266_CMD_Recv == ">")
-    {
-        ESP_8266_UART.RcvReply(ESP_8266_CMD_Recv, 1000);
-        wait(100);
-        i++;
-    }
-    //if(FPS_Auth)
-        FRDM_UART_Debug.printf("R\r\n%s",ESP_8266_CMD_Recv);
-    
-    ESP_8266_UART.SendCMD(ESP_8266_CMD_Send);                                                      //Post value to thingspeak channel
-    if(FPS_Auth)
-        FRDM_UART_Debug.printf("S\r\n%s",ESP_8266_CMD_Send);
-    
-    while(i<=20 || ESP_8266_CMD_Recv == "OK")
-    {
-        ESP_8266_UART.RcvReply(ESP_8266_CMD_Recv, 1000);
-        wait(100);
-        i++;
-    }
-    //if(FPS_Auth)
-        FRDM_UART_Debug.printf("R\r\n%s",ESP_8266_CMD_Recv);
-    
-}
-
+} 
\ No newline at end of file