Richard Kuo
This is a simple mbed client example demonstrating, registration of a device with mbed Device Connector and reading and writing values as well as deregistering on different Network Interfaces including Ethernet, WiFi, 6LoWPAN ND and Thread respectively.
Fork of
mbed-os-example-client
by 
mbed-os-examples
Revision 63:c73f78fd7982, committed 2017-02-15
- Comitter:
- mbed_official
- Date:
- Wed Feb 15 08:00:11 2017 +0000
- Parent:
- 62:077cbce2bd10
- Child:
- 64:d7458b04a609
- Commit message:
- Integrate easy-connect, fix serial, fix warning (#176)
Integrate easy-connect
- we can remove all the external RF-drivers from main folder
- get easy-connect into use
- remove all the complicated network stuff
Fix serial - we don't need raw serial and we don't need to initialize it
if we set the right stuff to mbed_app.json (added). Plain printf() works
and it even does type checking now. (Points to Kevin Bracey on this).
Start the thread in a non-deprecated way using callback to remove one compiler
warning (again, points to Kevin Bracey).
Easy-connect ESP8266 TX/RX pins in different defines.
mbed-os-example-client has NEVER used 2 sets of WiFi pins, so need
to add a define to hack them into one set - otherwise it will not compile.
The cp command would not have worked if one would have changed
the compiler. Add UBLOX ODIN ETH config to be built as well,
now that we have figured out how to make the the ethernet work
on it.
Change also the WIFI to work with easy-connect. Easy-connect has 2 separate WIFIs,
so you have to choose between ESP8266 vs. ODIN. Thus, 2 config files are also needed,
one for ESP8266 and one for ODIN.
.
Commit copied from https://github.com/ARMmbed/mbed-os-example-client
Changed in this revision
--- a/README.md Thu Feb 02 08:30:11 2017 +0000 +++ b/README.md Wed Feb 15 08:00:11 2017 +0000 @@ -323,15 +323,17 @@ After connecting, you should see messages about connecting to mbed Device Connector: ``` -Starting mbed Client example... -Using <Network Interface> +Starting mbed Client example in IPv4 mode +[EasyConnect] Using Ethernet +[EasyConnect] Connected to Network successfully +[EasyConnect] IP address 192.168.8.110 +[EasyConnect] MAC address 5c:cf:7f:86:de:bf -Connected to Network successfully -IP address xxx.xxx.xxx.xxx +SOCKET_MODE : TCP -SOCKET_MODE : UDP Connecting to coap://api.connector.mbed.com:5684 +Registered object succesfully! ``` <span class="notes">**Note:** Device name is the endpoint name you will need later on when [testing the application](https://github.com/ARMmbed/mbed-os-example-client#testing-the-application).</span>
--- a/atmel-rf-driver.lib Thu Feb 02 08:30:11 2017 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,1 +0,0 @@ -https://github.com/armmbed/atmel-rf-driver/#57f22763f4d3649d4ac0b1df1f568f4cc45e491a
--- a/build_all.sh Thu Feb 02 08:30:11 2017 +0000 +++ b/build_all.sh Wed Feb 15 08:00:11 2017 +0000 @@ -4,37 +4,52 @@ TOOL=GCC_ARM echo Compiling with $TOOL +echo Ethernet v4 cp configs/eth_v4.json ./mbed_app.json cp configs/eth-wifi-mbedignore ./.mbedignore mbed compile -m K64F -t $TOOL -cp BUILD/K64F/GCC_ARM/mbed-os-example-client.bin k64f-$TOOL-eth-v4.bin +cp BUILD/K64F/$TOOL/mbed-os-example-client.bin k64f-$TOOL-eth-v4.bin mbed compile -m NUCLEO_F439ZI -t $TOOL -cp ./BUILD/NUCLEO_F439ZI/GCC_ARM/mbed-os-example-client.bin f439zi-$TOOL-eth-v4.bin +cp ./BUILD/NUCLEO_F439ZI/$TOOL/mbed-os-example-client.bin f439zi-$TOOL-eth-v4.bin +mbed compile -m UBLOX_EVK_ODIN_W2 -t $TOOL +cp ./BUILD/UBLOX_EVK_ODIN_W2/$TOOL/mbed-os-example-client.bin ublox-odin-$TOOL-eth-v4.bin +echo Ethernet v6 cp configs/eth_v6.json ./mbed_app.json cp configs/eth-wifi-mbedignore ./.mbedignore mbed compile -m K64F -t $TOOL -cp BUILD/K64F/GCC_ARM/mbed-os-example-client.bin k64f-$TOOL-eth-v6.bin +cp BUILD/K64F/$TOOL/mbed-os-example-client.bin k64f-$TOOL-eth-v6.bin mbed compile -m NUCLEO_F439ZI -t $TOOL -cp ./BUILD/NUCLEO_F439ZI/GCC_ARM/mbed-os-example-client.bin f439zi-$TOOL-eth-v4.bin +cp ./BUILD/NUCLEO_F439ZI/$TOOL/mbed-os-example-client.bin f439zi-$TOOL-eth-v4.bin +mbed compile -m UBLOX_EVK_ODIN_W2 -t $TOOL +cp ./BUILD/UBLOX_EVK_ODIN_W2/$TOOL/mbed-os-example-client.bin ublox-odin-$TOOL-eth-v6.bin -cp configs/wifi_v4.json ./mbed_app.json +echo WIFI - ESP8266 +cp configs/wifi_esp8266_v4.json ./mbed_app.json cp configs/eth-wifi-mbedignore ./.mbedignore mbed compile -m K64F -t $TOOL -cp BUILD/K64F/GCC_ARM/mbed-os-example-client.bin k64f-$TOOL-wifi-v4.bin +cp BUILD/K64F/$TOOL/mbed-os-example-client.bin k64f-$TOOL-esp-wifi-v4.bin +mbed compile -m NUCLEO_F439ZI -t $TOOL +cp ./BUILD/NUCLEO_F439ZI/$TOOL/mbed-os-example-client.bin f439zi-$TOOL-esp-wifi-v4.bin + +echo WIFI - ODIN for UBLOX_EVK_ODIN_W2 +cp configs/wifi_odin_v4.json ./mbed_app.json +cp configs/eth-wifi-mbedignore ./.mbedignore mbed compile -m UBLOX_EVK_ODIN_W2 -t $TOOL -cp ./BUILD/UBLOX_EVK_ODIN_W2/GCC_ARM/mbed-os-example-client.bin ublox-odin-$TOOL-wifi-v4.bin +cp ./BUILD/UBLOX_EVK_ODIN_W2/$TOOL/mbed-os-example-client.bin ublox-odin-$TOOL-wifi-v4.bin +echo 6-Lowpan builds cp configs/mesh_6lowpan.json ./mbed_app.json cp configs/mesh-mbedignore ./.mbedignore mbed compile -m K64F -t $TOOL -cp BUILD/K64F/GCC_ARM/mbed-os-example-client.bin k64f-$TOOL-6lowpan.bin +cp BUILD/K64F/$TOOL/mbed-os-example-client.bin k64f-$TOOL-6lowpan.bin mbed compile -m NUCLEO_F439ZI -t $TOOL -cp ./BUILD/NUCLEO_F439ZI/GCC_ARM/mbed-os-example-client.bin f439zi-$TOOL-6lowpan.bin +cp ./BUILD/NUCLEO_F439ZI/$TOOL/mbed-os-example-client.bin f439zi-$TOOL-6lowpan.bin +echo Thread builds cp configs/mesh_thread.json ./mbed_app.json cp configs/mesh-mbedignore ./.mbedignore mbed compile -m K64F -t $TOOL -cp BUILD/K64F/GCC_ARM/mbed-os-example-client.bin k64f-$TOOL-Thread.bin +cp BUILD/K64F/$TOOL/mbed-os-example-client.bin k64f-$TOOL-Thread.bin mbed compile -m NUCLEO_F439ZI -t $TOOL -cp ./BUILD/NUCLEO_F439ZI/GCC_ARM/mbed-os-example-client.bin f439zi-$TOOL-Thread.bin \ No newline at end of file +cp ./BUILD/NUCLEO_F439ZI/$TOOL/mbed-os-example-client.bin f439zi-$TOOL-Thread.bin
--- a/configs/eth-wifi-mbedignore Thu Feb 02 08:30:11 2017 +0000 +++ b/configs/eth-wifi-mbedignore Wed Feb 15 08:00:11 2017 +0000 @@ -1,3 +1,3 @@ -atmel-rf-driver/* -mcr20a-rf-driver/* +easy-connect/atmel-rf-driver/* +easy-connect/mcr20a-rf-driver/*
--- a/configs/eth_v4.json Thu Feb 02 08:30:11 2017 +0000
+++ b/configs/eth_v4.json Wed Feb 15 08:00:11 2017 +0000
@@ -1,7 +1,7 @@
{
"config": {
"network-interface":{
- "help": "options are ETHERNET,WIFI,MESH_LOWPAN_ND,MESH_THREAD",
+ "help": "Options are ETHERNET, WIFI_ESP8266, WIFI_ODIN, MESH_LOWPAN_ND, MESH_THREAD",
"value": "ETHERNET"
}
},
@@ -9,6 +9,8 @@
"target_overrides": {
"*": {
"target.features_add": ["LWIP", "COMMON_PAL"],
+ "platform.stdio-baud-rate": 115200,
+ "platform.stdio-convert-newlines": true,
"lwip.ipv4-enabled": true,
"lwip.ipv6-enabled": false,
"mbed-trace.enable": 0
--- a/configs/eth_v6.json Thu Feb 02 08:30:11 2017 +0000
+++ b/configs/eth_v6.json Wed Feb 15 08:00:11 2017 +0000
@@ -1,7 +1,7 @@
{
"config": {
"network-interface":{
- "help": "options are ETHERNET,WIFI,MESH_LOWPAN_ND,MESH_THREAD",
+ "help": "Options are ETHERNET, WIFI_ESP8266, WIFI_ODIN, MESH_LOWPAN_ND, MESH_THREAD",
"value": "ETHERNET"
}
},
@@ -9,6 +9,8 @@
"target_overrides": {
"*": {
"target.features_add": ["LWIP", "COMMON_PAL"],
+ "platform.stdio-baud-rate": 115200,
+ "platform.stdio-convert-newlines": true,
"lwip.ipv4-enabled": false,
"lwip.ipv6-enabled": true,
"mbed-trace.enable": 0
--- a/configs/mesh-mbedignore Thu Feb 02 08:30:11 2017 +0000 +++ b/configs/mesh-mbedignore Wed Feb 15 08:00:11 2017 +0000 @@ -1,1 +1,1 @@ -esp8266-driver/* +easy-connect/esp8266-driver/*
--- a/configs/mesh_6lowpan.json Thu Feb 02 08:30:11 2017 +0000
+++ b/configs/mesh_6lowpan.json Wed Feb 15 08:00:11 2017 +0000
@@ -1,7 +1,7 @@
{
"config": {
"network-interface":{
- "help": "options are ETHERNET,WIFI,MESH_LOWPAN_ND,MESH_THREAD",
+ "help": "Options are ETHERNET, WIFI_ESP8266, WIFI_ODIN, MESH_LOWPAN_ND, MESH_THREAD",
"value": "MESH_LOWPAN_ND"
},
"mesh_radio_type": {
@@ -13,6 +13,8 @@
"target_overrides": {
"*": {
"target.features_add": ["NANOSTACK", "LOWPAN_ROUTER", "COMMON_PAL"],
+ "platform.stdio-baud-rate": 115200,
+ "platform.stdio-convert-newlines": true,
"mbed-mesh-api.6lowpan-nd-channel-page": 0,
"mbed-mesh-api.6lowpan-nd-channel": 12,
"mbed-trace.enable": 0
--- a/configs/mesh_thread.json Thu Feb 02 08:30:11 2017 +0000
+++ b/configs/mesh_thread.json Wed Feb 15 08:00:11 2017 +0000
@@ -1,7 +1,7 @@
{
"config": {
"network-interface":{
- "help": "options are ETHERNET,WIFI,MESH_LOWPAN_ND,MESH_THREAD",
+ "help": "Options are ETHERNET, WIFI_ESP8266, WIFI_ODIN, MESH_LOWPAN_ND, MESH_THREAD",
"value": "MESH_THREAD"
},
"mesh_radio_type": {
@@ -13,6 +13,8 @@
"target_overrides": {
"*": {
"target.features_add": ["NANOSTACK", "THREAD_ROUTER", "COMMON_PAL"],
+ "platform.stdio-baud-rate": 115200,
+ "platform.stdio-convert-newlines": true,
"mbed-mesh-api.thread-config-channel": 12,
"mbed-mesh-api.thread-config-panid": "0xDEFA",
"mbed-trace.enable": 0
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/configs/wifi_esp8266_v4.json Wed Feb 15 08:00:11 2017 +0000
@@ -0,0 +1,43 @@
+{
+ "config": {
+ "network-interface":{
+ "help": "Options are ETHERNET, WIFI_ESP8266, WIFI_ODIN, MESH_LOWPAN_ND, MESH_THREAD",
+ "value": "WIFI_ESP8266"
+ },
+ "wifi-ssid": {
+ "help": "WiFi SSID",
+ "value": "\"SSID\""
+ },
+ "wifi-password": {
+ "help": "WiFi Password",
+ "value": "\"Password\""
+ },
+ "wifi-tx": {
+ "help": "TX pin for serial connection to external device",
+ "value": "D1"
+ },
+ "wifi-rx": {
+ "help": "RX pin for serial connection to external device",
+ "value": "D0"
+ }
+ },
+ "macros": ["MBEDTLS_USER_CONFIG_FILE=\"mbedtls_mbed_client_config.h\""],
+ "target_overrides": {
+ "*": {
+ "target.features_add": ["LWIP", "COMMON_PAL"],
+ "platform.stdio-baud-rate": 115200,
+ "platform.stdio-convert-newlines": true,
+ "lwip.ipv4-enabled": true,
+ "lwip.ipv6-enabled": false,
+ "mbed-trace.enable": 0
+ },
+ "NUCLEO_F401RE": {
+ "wifi-tx": "PA_11",
+ "wifi-rx": "PA_12"
+ },
+ "NUCLEO_F411RE": {
+ "wifi-tx": "PA_11",
+ "wifi-rx": "PA_12"
+ }
+ }
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/configs/wifi_odin_v4.json Wed Feb 15 08:00:11 2017 +0000
@@ -0,0 +1,43 @@
+{
+ "config": {
+ "network-interface":{
+ "help": "Options are ETHERNET, WIFI_ESP8266, WIFI_ODIN, MESH_LOWPAN_ND, MESH_THREAD",
+ "value": "WIFI_ODIN"
+ },
+ "wifi-ssid": {
+ "help": "WiFi SSID",
+ "value": "\"SSID\""
+ },
+ "wifi-password": {
+ "help": "WiFi Password",
+ "value": "\"Password\""
+ },
+ "wifi-tx": {
+ "help": "TX pin for serial connection to external device",
+ "value": "D1"
+ },
+ "wifi-rx": {
+ "help": "RX pin for serial connection to external device",
+ "value": "D0"
+ }
+ },
+ "macros": ["MBEDTLS_USER_CONFIG_FILE=\"mbedtls_mbed_client_config.h\""],
+ "target_overrides": {
+ "*": {
+ "target.features_add": ["LWIP", "COMMON_PAL"],
+ "platform.stdio-baud-rate": 115200,
+ "platform.stdio-convert-newlines":true,
+ "lwip.ipv4-enabled": true,
+ "lwip.ipv6-enabled": false,
+ "mbed-trace.enable": 0
+ },
+ "NUCLEO_F401RE": {
+ "wifi-tx": "PA_11",
+ "wifi-rx": "PA_12"
+ },
+ "NUCLEO_F411RE": {
+ "wifi-tx": "PA_11",
+ "wifi-rx": "PA_12"
+ }
+ }
+}
--- a/configs/wifi_v4.json Thu Feb 02 08:30:11 2017 +0000
+++ b/configs/wifi_v4.json Wed Feb 15 08:00:11 2017 +0000
@@ -1,8 +1,8 @@
{
"config": {
"network-interface":{
- "help": "options are ETHERNET,WIFI,MESH_LOWPAN_ND,MESH_THREAD",
- "value": "WIFI"
+ "help": "Options are ETHERNET, WIFI_ESP8266, WIFI_ODIN, MESH_LOWPAN_ND, MESH_THREAD",
+ "value": "WIFI_ESP8266"
},
"wifi-ssid": {
"help": "WiFi SSID",
@@ -25,6 +25,8 @@
"target_overrides": {
"*": {
"target.features_add": ["LWIP", "COMMON_PAL"],
+ "platform.stdio-baud-rate": 115200,
+ "platform.stdio-convert-newlines": true,
"lwip.ipv4-enabled": true,
"lwip.ipv6-enabled": false,
"mbed-trace.enable": 0
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/easy-connect.lib Wed Feb 15 08:00:11 2017 +0000 @@ -0,0 +1,1 @@ +https://github.com/ARMmbed/easy-connect.git/#a913964341394430cd3997c6f2950f93ba1d75c8
--- a/esp8266-driver.lib Thu Feb 02 08:30:11 2017 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,1 +0,0 @@ -https://github.com/ARMmbed/esp8266-driver/#86ed47c8bf40c86fdc569c7e678a8944f5e01c2a
--- a/main.cpp Thu Feb 02 08:30:11 2017 +0000
+++ b/main.cpp Wed Feb 15 08:00:11 2017 +0000
@@ -13,6 +13,8 @@
* See the License for the specific language governing permissions and
* limitations under the License.
*/
+#define __STDC_FORMAT_MACROS
+#include <inttypes.h>
#include "simpleclient.h"
#include <string>
#include <sstream>
@@ -23,50 +25,11 @@
#include "security.h"
#include "mbed.h"
-#include "rtos.h"
-#if MBED_CONF_APP_NETWORK_INTERFACE == WIFI
- #if TARGET_UBLOX_EVK_ODIN_W2
- #include "OdinWiFiInterface.h"
- OdinWiFiInterface wifi;
- #else
- #include "ESP8266Interface.h"
- ESP8266Interface wifi(MBED_CONF_APP_WIFI_TX, MBED_CONF_APP_WIFI_RX);
- #endif
-#elif MBED_CONF_APP_NETWORK_INTERFACE == ETHERNET
- #include "EthernetInterface.h"
- EthernetInterface eth;
-#elif MBED_CONF_APP_NETWORK_INTERFACE == MESH_LOWPAN_ND
- #define MESH
- #include "NanostackInterface.h"
- LoWPANNDInterface mesh;
-#elif MBED_CONF_APP_NETWORK_INTERFACE == MESH_THREAD
- #define MESH
- #include "NanostackInterface.h"
- ThreadInterface mesh;
-#endif
-
-#if defined(MESH)
-#if MBED_CONF_APP_MESH_RADIO_TYPE == ATMEL
-#include "NanostackRfPhyAtmel.h"
-NanostackRfPhyAtmel rf_phy(ATMEL_SPI_MOSI, ATMEL_SPI_MISO, ATMEL_SPI_SCLK, ATMEL_SPI_CS,
- ATMEL_SPI_RST, ATMEL_SPI_SLP, ATMEL_SPI_IRQ, ATMEL_I2C_SDA, ATMEL_I2C_SCL);
-#elif MBED_CONF_APP_MESH_RADIO_TYPE == MCR20
-#include "NanostackRfPhyMcr20a.h"
-NanostackRfPhyMcr20a rf_phy(MCR20A_SPI_MOSI, MCR20A_SPI_MISO, MCR20A_SPI_SCLK, MCR20A_SPI_CS, MCR20A_SPI_RST, MCR20A_SPI_IRQ);
-#endif //MBED_CONF_APP_RADIO_TYPE
-#endif //MESH
-
-#ifdef MESH
- // Mesh does not have DNS, so must use direct IPV6 address
- #define MBED_SERVER_ADDRESS "coaps://[2607:f0d0:2601:52::20]:5684"
-#else
- // This is address to mbed Device Connector, name based
- // assume all other stacks support DNS properly
- #define MBED_SERVER_ADDRESS "coap://api.connector.mbed.com:5684"
-#endif
-
-RawSerial output(USBTX, USBRX);
+// easy-connect compliancy, it has 2 sets of wifi pins we have only one
+#define MBED_CONF_APP_ESP8266_TX MBED_CONF_APP_WIFI_TX
+#define MBED_CONF_APP_ESP8266_RX MBED_CONF_APP_WIFI_RX
+#include "easy-connect/easy-connect.h"
// Status indication
DigitalOut red_led(LED1);
@@ -176,7 +139,7 @@
// turn the buffer into a string, and initialize a vector<int> on the heap
std::string s((char*)buffIn, sizeIn);
free(buffIn);
- output.printf("led_execute_callback pattern=%s\r\n", s.c_str());
+ printf("led_execute_callback pattern=%s\n", s.c_str());
// our pattern is something like 500:200:500, so parse that
std::size_t found = s.find_first_of(":");
@@ -196,11 +159,11 @@
String resource_name = param->get_argument_resource_name();
int payload_length = param->get_argument_value_length();
uint8_t* payload = param->get_argument_value();
- output.printf("Resource: %s/%d/%s executed\r\n", object_name.c_str(), object_instance_id, resource_name.c_str());
- output.printf("Payload: %.*s\r\n", payload_length, payload);
+ printf("Resource: %s/%d/%s executed\n", object_name.c_str(), object_instance_id, resource_name.c_str());
+ printf("Payload: %.*s\n", payload_length, payload);
}
// do_blink is called with the vector, and starting at -1
- blinky_thread.start(this, &LedResource::do_blink);
+ blinky_thread.start(callback(this, &LedResource::do_blink));
}
private:
@@ -266,9 +229,9 @@
// up counter
counter++;
#ifdef TARGET_K64F
- printf("handle_button_click, new value of counter is %d\r\n", counter);
+ printf("handle_button_click, new value of counter is %d\n", counter);
#else
- printf("simulate button_click, new value of counter is %d\r\n", counter);
+ printf("simulate button_click, new value of counter is %d\n", counter);
#endif
// serialize the value of counter as a string, and tell connector
char buffer[20];
@@ -304,9 +267,9 @@
if (argument) {
if (M2MBlockMessage::ErrorNone == argument->error_code()) {
if (argument->is_last_block()) {
- output.printf("Last block received\r\n");
+ printf("Last block received\n");
}
- output.printf("Block number: %d\r\n", argument->block_number());
+ printf("Block number: %d\n", argument->block_number());
// First block received
if (argument->block_number() == 0) {
// Store block
@@ -315,14 +278,14 @@
// Store blocks
}
} else {
- output.printf("Error when receiving block message! - EntityTooLarge\r\n");
+ printf("Error when receiving block message! - EntityTooLarge\n");
}
- output.printf("Total message size: %d\r\n", argument->total_message_size());
+ printf("Total message size: %" PRIu32 "\n", argument->total_message_size());
}
}
void block_message_requested(const String& resource, uint8_t *&/*data*/, uint32_t &/*len*/) {
- output.printf("GET request received for resource: %s\r\n", resource.c_str());
+ printf("GET request received for resource: %s\n", resource.c_str());
// Copy data and length to coap response
}
@@ -346,11 +309,6 @@
updates.release();
}
-// debug printf function
-void trace_printer(const char* str) {
- printf("%s\r\n", str);
-}
-
// Entry point to the program
int main() {
@@ -378,51 +336,24 @@
srand(seed);
red_led = 1;
blue_led = 1;
+
status_ticker.attach_us(blinky, 250000);
// Keep track of the main thread
mainThread = osThreadGetId();
- // Sets the console baud-rate
- output.baud(115200);
-
- output.printf("\r\nStarting mbed Client example in ");
+ printf("\nStarting mbed Client example in ");
#if defined (MESH) || (MBED_CONF_LWIP_IPV6_ENABLED==true)
- output.printf("IPv6 mode\r\n");
+ printf("IPv6 mode\n");
#else
- output.printf("IPv4 mode\r\n");
+ printf("IPv4 mode\n");
#endif
mbed_trace_init();
- mbed_trace_print_function_set(trace_printer);
- NetworkInterface *network_interface = 0;
- int connect_success = -1;
-#if MBED_CONF_APP_NETWORK_INTERFACE == WIFI
- output.printf("\n\rConnecting to WiFi...\r\n");
- connect_success = wifi.connect(MBED_CONF_APP_WIFI_SSID, MBED_CONF_APP_WIFI_PASSWORD, NSAPI_SECURITY_WPA_WPA2);
- network_interface = &wifi;
-#elif MBED_CONF_APP_NETWORK_INTERFACE == ETHERNET
- output.printf("\n\rConnecting to ethernet...\r\n");
- connect_success = eth.connect();
- network_interface = ð
-#endif
-#ifdef MESH
- output.printf("\n\rConnecting to Mesh...\r\n");
- mesh.initialize(&rf_phy);
- connect_success = mesh.connect();
- network_interface = &mesh;
-#endif
- if(connect_success == 0) {
- output.printf("\n\rConnected to Network successfully\r\n");
- } else {
- output.printf("\n\rConnection to Network Failed %d! Exiting application....\r\n", connect_success);
- return 0;
- }
- const char *ip_addr = network_interface->get_ip_address();
- if (ip_addr) {
- output.printf("IP address %s\r\n", ip_addr);
- } else {
- output.printf("No IP address\r\n");
+ NetworkInterface* network = easy_connect(true);
+ if(network == NULL) {
+ printf("\nConnection to Network Failed - exiting application...\n");
+ return -1;
}
// we create our button and LED resources
@@ -444,7 +375,7 @@
#endif
// Create endpoint interface to manage register and unregister
- mbed_client.create_interface(MBED_SERVER_ADDRESS, network_interface);
+ mbed_client.create_interface(MBED_SERVER_ADDRESS, network);
// Create Objects of varying types, see simpleclient.h for more details on implementation.
M2MSecurity* register_object = mbed_client.create_register_object(); // server object specifying connector info
--- a/mbed_app.json Thu Feb 02 08:30:11 2017 +0000
+++ b/mbed_app.json Wed Feb 15 08:00:11 2017 +0000
@@ -1,7 +1,7 @@
{
"config": {
"network-interface":{
- "help": "options are ETHERNET,WIFI,MESH_LOWPAN_ND,MESH_THREAD",
+ "help": "Options are ETHERNET, WIFI_ESP8266, WIFI_ODIN, MESH_LOWPAN_ND, MESH_THREAD",
"value": "ETHERNET"
},
"mesh_radio_type": {
@@ -29,6 +29,8 @@
"target_overrides": {
"*": {
"target.features_add": ["NANOSTACK", "LOWPAN_ROUTER", "COMMON_PAL"],
+ "platform.stdio-baud-rate": 115200,
+ "platform.stdio-convert-newlines": true,
"mbed-mesh-api.6lowpan-nd-channel-page": 0,
"mbed-mesh-api.6lowpan-nd-channel": 12,
"mbed-trace.enable": 0
--- a/mcr20a-rf-driver.lib Thu Feb 02 08:30:11 2017 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,1 +0,0 @@ -https://github.com/ARMmbed/mcr20a-rf-driver/#d8810e105d7d35315aa708ec51d821156cad45e9