History

added US_915 channel 9 for use and 20dbm default tip

2017-08-29, by rgilson [Tue, 29 Aug 2017 14:18:38 +0000] rev 88

added US_915 channel 9 for use and 20dbm

Added some test code to enable interrupts in deepssleep.

2017-08-23, by Helmut Tschemernjak [Wed, 23 Aug 2017 16:26:21 +0200] rev 87

Added some test code to enable interrupts in deepssleep.

The deepsleep disables the SysTick already

2017-08-17, by Helmut Tschemernjak [Thu, 17 Aug 2017 11:07:50 +0200] rev 86

The deepsleep disables the SysTick already

The deepsleep does not need to disable the SysTick, it is off

2017-08-12, by Helmut Tschemernjak [Sat, 12 Aug 2017 19:16:08 +0200] rev 85

The deepsleep does not need to disable the SysTick, it is off
already in suspend mode. It looks like out D21 MCU does not
need to keep the flash on during sleep, we got a newer chip
revision.

Modified InitSerial() to check if the USB Serial is active,

2017-08-11, by Helmut Tschemernjak [Fri, 11 Aug 2017 15:11:08 +0200] rev 84

Modified InitSerial() to check if the USB Serial is active,
turn off USB if no SerialUSB is being in use to save power

Added GetFrequencyError API support

2017-08-06, by Helmut Tschemernjak [Sun, 06 Aug 2017 14:23:43 +0200] rev 83

Added GetFrequencyError API support

Fixed some bandwidth table numbers (unused frequencies so far)

2017-08-06, by Helmut Tschemernjak [Sun, 06 Aug 2017 11:28:33 +0200] rev 82

Fixed some bandwidth table numbers (unused frequencies so far)

Use correct usec timestamps

2017-08-05, by Helmut Tschemernjak [Sat, 05 Aug 2017 16:08:26 +0200] rev 81

Use correct usec timestamps
More complete support for RxSignalPending detection

Added proper wait_ms function which uses our timers

2017-08-03, by Helmut Tschemernjak [Thu, 03 Aug 2017 13:43:35 +0200] rev 80

Added proper wait_ms function which uses our timers

Fixed a restart-timer problem that the existing timer stop was not re-used.

2017-08-03, by Helmut Tschemernjak [Thu, 03 Aug 2017 11:59:54 +0200] rev 79

Fixed a restart-timer problem that the existing timer stop was not re-used.
Fixed a dprintf timestamp problem, we need to limit the u-seconds to 6 digits
Block the dprintf function if it is busy.