Revision 1:1686fedb8e0a, committed 2017-04-07

Comitter:

rcflyair

Date:

Fri Apr 07 16:12:08 2017 +0000

Parent:

0:d58e47b3cc7e

Commit message:

initial commit;

Changed in this revision

diff -r d58e47b3cc7e -r 1686fedb8e0a SWITCH.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/SWITCH.cpp	Fri Apr 07 16:12:08 2017 +0000
@@ -0,0 +1,20 @@
+#include "SWITCH.h"
+
+SWITCH::SWITCH(PinName sw0, PinName sw1, PinName sw2, PinName sw3) : _sw0(sw0), _sw1(sw1), _sw2(sw2), _sw3(sw3)
+{
+    
+}    
+
+int SWITCH::GetMode(void)
+{
+    if (!_sw0.read()) return 1;
+    if (!_sw1.read()) return 2;
+    return 0;
+}
+
+int SWITCH::GetMove(void)
+{
+    if (!_sw2.read()) return 1;
+    if (!_sw3.read()) return 2;
+    return 0;
+}
\ No newline at end of file

diff -r d58e47b3cc7e -r 1686fedb8e0a SWITCH.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/SWITCH.h	Fri Apr 07 16:12:08 2017 +0000
@@ -0,0 +1,21 @@
+#ifndef SWITCH_H
+#define SWITCH_H
+
+#include <mbed.h>
+
+class SWITCH
+{
+    private:
+        DigitalIn _sw0;
+        DigitalIn _sw1;
+        DigitalIn _sw2;
+        DigitalIn _sw3;
+        
+    public:
+        SWITCH(PinName sw0, PinName sw1, PinName sw2, PinName sw3);
+        int GetMode(void);
+        int GetMove(void);
+};
+
+
+#endif // SWITCH
\ No newline at end of file

diff -r d58e47b3cc7e -r 1686fedb8e0a TLC59116.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TLC59116.cpp	Fri Apr 07 16:12:08 2017 +0000
@@ -0,0 +1,164 @@
+#include "TLC59116.h"
+
+TLC59116::TLC59116(PinName sda, PinName scl, PinName cs) : _i2c(sda, scl), _cs(cs)
+{
+    for (int i = 0; i < sizeof(b); i++) b[i] = 0;               // clear internal buffer
+    _i2c.frequency(400000);                                     // set i2c buffer frequency
+}    
+
+void TLC59116::Enable(void)
+{
+    _cs = 1;
+    wait_ms(1);
+}
+
+void TLC59116::Disable(void)
+{
+    _cs = 0;
+    wait_ms(1);
+}
+
+int TLC59116::SWRST()
+{
+    // TLC59116 SWRST
+    b[0] = 0xA5;
+    b[1] = 0x5A;
+    return(_i2c.write(0xD6, b, 2));
+}
+
+int TLC59116::init(void)
+{
+    // TLC59116 FOO
+    b[ 0] = AUTO_INCREMENT_ALL;             // COMMAND
+    b[ 1] = 0x00;                           // MODE1
+    b[ 2] = 0x00;                           // MODE2
+    b[ 3] = 0xFF;                           // PWM0
+    b[ 4] = 0xFF;                           // PWM1
+    b[ 5] = 0xFF;                           // PWM2
+    b[ 6] = 0xFF;                           // PWM3
+    b[ 7] = 0xFF;                           // PWM4
+    b[ 8] = 0xFF;                           // PWM5
+    b[ 9] = 0xFF;                           // PWM6
+    b[10] = 0xFF;                           // PWM7
+    b[11] = 0xFF;                           // PWM8
+    b[12] = 0xFF;                           // PWM9
+    b[13] = 0xFF;                           // PWM10
+    b[14] = 0xFF;                           // PWM11
+    b[15] = 0xFF;                           // PWM12
+    b[16] = 0xFF;                           // PWM13
+    b[17] = 0xFF;                           // PWM14
+    b[18] = 0xFF;                           // PWM15
+    b[19] = 0xFF;                           // GRPPWM
+    b[20] = 0x00;                           // GRPFREQ
+    b[21] = 0x00;                           // LEDOUT0
+    b[22] = 0x00;                           // LEDOUT1
+    b[23] = 0x00;                           // LEDOUT2
+    b[24] = 0x00;                           // LEDOUT3
+    return(_i2c.write(TLC59116_ADDRESS, b, 25));
+}
+
+int TLC59116::SetBrightness(int x)
+{
+    b[0] = AUTO_INCREMENT_NONE;                    // set mask for no auto increment
+    b[0] = b[0] | GRPPWM;                          // mask in group pwm control register
+    b[1] = x;                                      // Brightness - PWM value between 0 and 255
+    return(_i2c.write(TLC59116_ADDRESS, b, 2));
+}
+
+void TLC59116::SetAuto(bool v)
+{
+    b[0] = AUTO_INCREMENT_NONE;                     // set mask for no auto increment
+    b[0] = b[0] | LEDOUT3;                          // mask in LEDOUT3 register
+    _i2c.write(TLC59116_ADDRESS, b, 1);             // write register address
+    _i2c.read(TLC59116_ADDRESS, b, 1);              // read register
+    if (v)
+        b[1] = b[0] | 0b00000011;
+    else
+        b[1] = b[0] & 0b11111100;
+    b[0] = AUTO_INCREMENT_NONE;
+    b[0] = b[0] | LEDOUT3;
+    _i2c.write(TLC59116_ADDRESS, b, 2);
+}
+
+void TLC59116::SetManual(bool v)
+{
+    b[0] = AUTO_INCREMENT_NONE;                     // set mask for no auto increment
+    b[0] = b[0] | LEDOUT3;                          // mask in LEDOUT3 register
+    _i2c.write(TLC59116_ADDRESS, b, 1);             // write register address
+    _i2c.read(TLC59116_ADDRESS, b, 1);              // read register
+    if (v)
+        b[1] = b[0] | 0b00001100;
+    else
+        b[1] = b[0] & 0b11110011;
+    b[0] = AUTO_INCREMENT_NONE;
+    b[0] = b[0] | LEDOUT3;
+    _i2c.write(TLC59116_ADDRESS, b, 2);
+}
+
+void TLC59116::SetPower(bool v)
+{
+    b[0] = AUTO_INCREMENT_NONE;                     // set mask for no auto increment
+    b[0] = b[0] | LEDOUT2;                          // mask in LEDOUT3 register
+    _i2c.write(TLC59116_ADDRESS, b, 1);             // write register address
+    _i2c.read(TLC59116_ADDRESS, b, 1);              // read register
+    if (v)
+        b[1] = b[0] | 0b00110000;
+    else
+        b[1] = b[0] & 0b11001111;
+    b[0] = AUTO_INCREMENT_NONE;
+    b[0] = b[0] | LEDOUT2;
+    _i2c.write(TLC59116_ADDRESS, b, 2);
+}
+
+void TLC59116::SetFault(bool v)
+{
+    b[0] = AUTO_INCREMENT_NONE;                     // set mask for no auto increment
+    b[0] = b[0] | LEDOUT2;                          // mask in LEDOUT3 register
+    _i2c.write(TLC59116_ADDRESS, b, 1);             // write register address
+    _i2c.read(TLC59116_ADDRESS, b, 1);              // read register
+    if (v)
+        b[1] = b[0] | 0b11000000;
+    else
+        b[1] = b[0] & 0b00111111;
+    b[0] = AUTO_INCREMENT_NONE;
+    b[0] = b[0] | LEDOUT2;
+    _i2c.write(TLC59116_ADDRESS, b, 2);
+}
+
+// Set bar graph to value between zero and ten.
+//  This routine sets the bar graph only
+void TLC59116::SetBarGraph(int x)
+{
+    const int d[11][4] = {
+        //LEDOUT0     LEDOUT1     LEDOUT2     LEDOUT3
+        0b00000000, 0b00000000, 0b00000000, 0b00000000,     // 0
+        0b00000000, 0b00000000, 0b00001100, 0b00000000,     // 1
+        0b00000000, 0b00000000, 0b00001111, 0b00000000,     // 2
+        0b00000000, 0b11000000, 0b00001111, 0b00000000,     // 3
+        0b00000000, 0b11110000, 0b00001111, 0b00000000,     // 4
+        0b00000000, 0b11111100, 0b00001111, 0b00000000,     // 5
+        0b00000000, 0b11111111, 0b00001111, 0b00000000,     // 6
+        0b11000000, 0b11111111, 0b00001111, 0b00000000,     // 7
+        0b11110000, 0b11111111, 0b00001111, 0b00000000,     // 8
+        0b11111100, 0b11111111, 0b00001111, 0b00000000,     // 9
+        0b11111111, 0b11111111, 0b00001111, 0b00000000      // 10
+    };
+
+    // read current LED status
+    b[0] = AUTO_INCREMENT_ALL;
+    b[0] = b[0] | LEDOUT0;
+    _i2c.write(TLC59116_ADDRESS, b, 1);
+    _i2c.read(TLC59116_ADDRESS, b, 4);
+
+    b[2] = b[2] & ~d[10][2]; // 0b11110000;
+    b[2] = b[2] | d[x][2];
+
+    b[4] = b[3];
+    b[3] = b[2];
+    b[2] = d[x][1];
+    b[1] = d[x][0];
+    b[0] = AUTO_INCREMENT_ALL;
+    b[0] = b[0] | LEDOUT0;
+    _i2c.write(TLC59116_ADDRESS, b, 5);
+
+}

diff -r d58e47b3cc7e -r 1686fedb8e0a TLC59116.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TLC59116.h	Fri Apr 07 16:12:08 2017 +0000
@@ -0,0 +1,95 @@
+#ifndef TLC59116_H
+#define TLC59116_H
+
+#include <mbed.h>
+
+#define TLC59116_ADDRESS (0x60 << 1)
+
+//********** REGISTER MAP DEFINITION
+#define MODE1       0x00;
+#define MODE2       0x01;
+#define PWM0        0x02;
+#define PWM1        0x03;
+#define PWM2        0x04;
+#define PWM3        0x05;
+#define PWM4        0x06;
+#define PWM5        0x07;
+#define PWM6        0x08;
+#define PWM7        0x09;
+#define PWM8        0x0A;
+#define PWM9        0x0B;
+#define PWM10       0x0C;
+#define PWM11       0x0D;
+#define PWM12       0x0E;
+#define PWM13       0x0F;
+#define PWM14       0x10;
+#define PWM15       0x11;
+#define GRPPWM      0x12;
+#define GRPFREQ     0x13;
+#define LEDOUT0     0x14;
+#define LEDOUT1     0x15;
+#define LEDOUT2     0x16;
+#define LEDOUT3     0x17;
+#define SUBADR1     0x18;
+#define SUBADR2     0x19;
+#define SUBADR3     0x1A;
+#define ALLCALLADR  0x1B;
+#define IREF        0x1C;
+#define EFLAG1      0x1D;
+#define EFLAG2      0x1E;
+
+
+//********** CONTROL REGISTER MASK DEFINITION
+//  Auto Increment options
+//  The CONTROL REGISTER three most significant bits contain the auto incrementing flag
+//      and the five least significant the address the starting register address
+//      A12 A11 A10 D4 D3 D2 D1 D0
+//  The following #defines are masks setting the auto increment flag
+//
+//  * No auto increment
+//  000 is used when the same register must be accessed several times during a single I2C bus communication,
+//  for example, changing the brightness of a single LED. Data is overwritten each time the register
+//  is accessed during a write operation.
+#define AUTO_INCREMENT_NONE             0x00;   // mask = 000xxxxx
+//  * Auto increment all registers
+//  100 is used when all the registers must be sequentially accessed, for example, power-up programming.
+#define AUTO_INCREMENT_ALL              0x80;   // mask = 100xxxxx
+//  * Auto increment brightness
+//  101 is used when the four LED drivers must be individually programmed with different values during the
+//  same I2C bus communication, for example, changing a color setting to another color setting.
+#define AUTO_INCREMENT_BRIGHTNESS       0xA0;   // mask = 101xxxxx
+//  * Auto increment control
+//  110 is used when the LED drivers must be globally programmed with different settings during the same
+//  I2C bus communication, for example, global brightness or blinking change.
+#define AUTO_INCREMENT_GLOBAL_CONTROL   0xC0;   // mask = 110xxxxx
+//  * Auto increment brightness and control
+//  111 is used when individually and global changes must be performed during the same
+//  I2C bus communication, for example, changing color and global brightness at the same time.
+#define AUTO_INCREMENT_BRIGHT_CONTROL   0xE0;   // mask = 111xxxxx
+//**********
+
+// TLC59116 Registers
+#define COMMAND 0x00;
+
+
+class TLC59116
+{
+    private:
+        I2C _i2c;
+        DigitalOut _cs;
+        char b[32];
+    public:
+        TLC59116(PinName sda, PinName scl, PinName cs);
+        void Enable(void);
+        void Disable(void);
+        int  SWRST(void);
+        int  init(void);
+        int  SetBrightness(int x);
+        void SetAuto(bool v);
+        void SetManual(bool v);
+        void SetPower(bool v);
+        void SetFault(bool v);
+        void SetBarGraph(int x);
+};
+
+#endif
\ No newline at end of file

diff -r d58e47b3cc7e -r 1686fedb8e0a main.cpp
--- a/main.cpp	Tue Jun 28 18:29:49 2016 +0000
+++ b/main.cpp	Fri Apr 07 16:12:08 2017 +0000
@@ -1,13 +1,53 @@
 #include "mbed.h"
-I2C i2c(D14, D15);        // sda, scl
-Serial pc(USBTX, USBRX); // tx, rx
+#include "TLC59116.h"
+#include "SWITCH.h"
+
+Serial pc(PA_9, PA_10);                 // USB over serial USBTX, USBRX
+DigitalOut led(PA_5);                   // Nucleo-F303RE LED
+TLC59116 pdu(PB_7, PA_15, PB_11);       // TLC59116 LED driver in pdu SDA, SCL, CS
+SWITCH sw(PB_15, PB_13, PB_1, PB_14);
+bool fault = false;
 
 int main()
 {
-    pc.printf("RUN\r\n");
-    for(int i = 0; i < 128 ; i++) {
-        i2c.start();
-        if(i2c.write(i << 1)) pc.printf("0x%x ACK \r\n",i); // Send command string
-        i2c.stop();
+    pdu.Enable();
+    pdu.SWRST();
+    pdu.init();
+    #define DELAY 20
+    
+    pdu.SetBrightness(128);
+
+    while(1)
+    {
+        pdu.SetPower(true);
+        fault = !fault;
+        pdu.SetFault(fault);
+        if (sw.GetMode() == 1)
+        {
+            pdu.SetAuto(true);
+            pdu.SetManual(false);
+        }
+        if (sw.GetMode() == 2)
+        {
+            pdu.SetAuto(false);
+            pdu.SetManual(true);
+        }
+        
+
+        pc.printf("GetMode = %x\r\n", sw.GetMode());
+        pc.printf("GetMove = %x\r\n", sw.GetMove());        
+        pc.printf("\r\n");
+        
+        for (int i = 0; i <= 10; i++)
+        {
+            pdu.SetBarGraph(i);
+            wait_ms(DELAY);
+        }
+        
+        for (int i = 10; i >= 0; i--)
+        {
+            pdu.SetBarGraph(i);
+            wait_ms(DELAY);
+        }
     }
 }
\ No newline at end of file

diff -r d58e47b3cc7e -r 1686fedb8e0a mbed.bld
--- a/mbed.bld	Tue Jun 28 18:29:49 2016 +0000
+++ b/mbed.bld	Fri Apr 07 16:12:08 2017 +0000
@@ -1,1 +1,1 @@
-http://mbed.org/users/mbed_official/code/mbed/builds/6c34061e7c34
\ No newline at end of file
+https://mbed.org/users/mbed_official/code/mbed/builds/856d2700e60b
\ No newline at end of file