Diff: targets/TARGET_ONSEMI/TARGET_NCS36510/spi_ipc7207_map.h

Revision:

149:156823d33999

Parent:

147:30b64687e01f

diff -r 21d94c44109e -r 156823d33999 targets/TARGET_ONSEMI/TARGET_NCS36510/spi_ipc7207_map.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_ONSEMI/TARGET_NCS36510/spi_ipc7207_map.h	Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,93 @@
+/**
+ ******************************************************************************
+ * @file spi_ipc7207_map.h
+ * @brief SPI IPC 7207 HW register map
+ * @internal
+ * @author  ON Semiconductor
+ * $Rev: 2110 $
+ * $Date: 2013-07-16 20:13:03 +0530 (Tue, 16 Jul 2013) $
+ ******************************************************************************
+ * Copyright 2016 Semiconductor Components Industries LLC (d/b/a “ON Semiconductor”).
+ * All rights reserved.  This software and/or documentation is licensed by ON Semiconductor
+ * under limited terms and conditions.  The terms and conditions pertaining to the software
+ * and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf
+ * (“ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software”) and
+ * if applicable the software license agreement.  Do not use this software and/or
+ * documentation unless you have carefully read and you agree to the limited terms and
+ * conditions.  By using this software and/or documentation, you agree to the limited
+ * terms and conditions.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL,
+ * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ * @endinternal
+ *
+ * @ingroup spi_ipc7207
+ *
+ * @details
+ * <p>
+ * SPI HW register map description
+ * </p>
+ *
+ * <h1> Reference document(s) </h1>
+ * <p>
+ * <a href="../pdf/IPC7207_SPI_APB_DS_v1P2.pdf" target="_blank">
+ * IPC7207 APB SPI Design Specification v1.2 </a>
+ * </p>
+ */
+
+#ifndef SPI_IPC7207_MAP_H_
+#define SPI_IPC7207_MAP_H_
+
+#include "architecture.h"
+
+/** SPI HW Structure Overlay */
+typedef struct {
+    __O uint32_t TX_DATA;
+    __I uint32_t RX_DATA;
+    __IO uint32_t FDIV;
+    union {
+        struct {
+            __IO uint32_t ENABLE :1; /**< SPI port enable: 0 = disable , 1 = enable */
+            __IO uint32_t SAMPLING_EDGE :1; /**< SDI sampling edge: 0 = opposite to SDO edge / 1 = same as SDO edge */
+            __IO uint32_t ENDIAN :1; /**< Bits endianness: 0 = LSB first (little-endian) / 1 = MSB first (big-endian) */
+            __IO uint32_t CPHA :1; /**< Clock phase: 0 = SDO set before first SCLK edge / 1 = SDO set after first SCLK edge */
+            __IO uint32_t CPOL :1; /**< Clock polarity: 0 = active high / 1 = active low */
+            __IO uint32_t MODE :1; /**< Device mode: 0 = slave mode / 1 = master mode */
+            __IO uint32_t WORD_WIDTH :2; /**< Word width: 0 = 8b / 1 = 16b / 2 = 32b / 3 = reserved */
+        } BITS;
+        __IO uint32_t WORD;
+    } CONTROL;
+    union {
+        struct {
+            __I uint32_t XFER_IP :1; /**< Transfer in progress: 0 = No transfer in progress / 1 = transfer in progress */
+            __I uint32_t XFER_ERROR :1;/**< Transfer error: 0 = no error / 1 = SPI Overflow or Underflow */
+            __I uint32_t TX_EMPTY :1; /**< Transmit FIFO/buffer empty flag: 0 = not empty / 1 = empty */
+            __I uint32_t TX_HALF :1; /**< Transmit FIFO/buffer "half full" flag: 0 = (< half full) / 1 = (>= half full) */
+            __I uint32_t TX_FULL :1; /**< Transmit FIFO/buffer full flag: 0 = not full / 1 = full */
+            __I uint32_t RX_EMPTY :1; /**< Receive FIFO/buffer empty flag: 0 = not empty / 1 = empty */
+            __I uint32_t RX_HALF :1; /**< Receive FIFO/buffer "half full" flag: 0 = (< half full) / 1 = (>= half full) */
+            __I uint32_t RX_FULL :1; /**< Receive FIFO/buffer full flag: 0 = not full / 1 = full */
+        } BITS;
+        __I uint32_t WORD;
+    } STATUS;
+    union {
+        struct {
+            __IO uint32_t SS_ENABLE :4; /**< Slave Select (x4): 0 = disable / 1 = enable */
+            __IO uint32_t SS_BURST :1; /**< Slave Select burst mode (maintain SS active if TXFIFO not empty) */
+        } BITS;
+        __IO uint32_t WORD;
+    } SLAVE_SELECT;
+    __IO uint32_t SLAVE_SELECT_POLARITY; /**< Slave Select polarity for up to 4 slaves:0 = active low / 1 = active high */
+    __IO uint32_t IRQ_ENABLE; /**< IRQ (x8) enable: 0 = disable / 1 = enable */
+    __I uint32_t IRQ_STATUS; /**< IRQ (x8) status: 0 = no IRQ occurred / 1 = IRQ occurred */
+    __O uint32_t IRQ_CLEAR; /**< IRQ (x8) clearing: write 1 to clear IRQ */
+    __IO uint32_t TX_WATERMARK; /**< Transmit FIFO Watermark: Defines level of RX Half Full Flag */
+    __IO uint32_t RX_WATERMARK; /**< Receive FIFO Watermark: Defines level of TX Half Full Flag */
+    __I uint32_t TX_FIFO_LEVEL; /**< Transmit FIFO Level: Indicates actual fill level of TX FIFO. */
+    __I uint32_t RX_FIFO_LEVEL; /**< Transmit FIFO Level: Indicates actual fill level of RX FIFO. */
+} SpiIpc7207Reg_t, *SpiIpc7207Reg_pt;
+
+#endif /* SPI_IPC7207_MAP_H_ */