Radu Radoveneanu / UniGraphic

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Fork of UniGraphic by GraphicsDisplay

Inits/UC1608.cpp@22:62f3bed03503, 2015-05-06 (annotated)

Committer:
rakware
Date:
Wed May 06 16:52:07 2015 +0000
Revision:
22:62f3bed03503
Parent:
9:1749ae993cfe 
added touch for ADS7843 bound to TFT class

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Geremia 4:12ba0ecc2c1f 1 /* mbed UniGraphic library - Device specific class
Geremia 4:12ba0ecc2c1f 2 * Copyright (c) 2015 Giuliano Dianda
Geremia 4:12ba0ecc2c1f 3 * Released under the MIT License: http://mbed.org/license/mit
Geremia 4:12ba0ecc2c1f 4 */
Geremia 0:75ec1b3cde17 5 #include "Protocols.h"
Geremia 0:75ec1b3cde17 6 #include "UC1608.h"
Geremia 0:75ec1b3cde17 7
Geremia 0:75ec1b3cde17 8 //////////////////////////////////////////////////////////////////////////////////
Geremia 0:75ec1b3cde17 9 // display settings ///////////////////////////////////////////////////////
Geremia 0:75ec1b3cde17 10 /////////////////////////////////////////////////////////////////////////
Geremia 0:75ec1b3cde17 11 #define IC_X_SEGS 240 // UC1608 SEG has range 0-239 (239-0 if MX=1), check your datasheet, important for the orientation
Geremia 0:75ec1b3cde17 12 #define IC_Y_COMS 128 // UC1608 COM has range 0-127 (127-0 if MY=1), check your datasheet, important for the orientation
dreschpe 9:1749ae993cfe 13 //#define LCDSIZE_X 240 // display X pixels
dreschpe 9:1749ae993cfe 14 //#define LCDSIZE_Y 120 // display Y pixels, UC1608 is advertised as 240x128 but display size could be smaller
Geremia 0:75ec1b3cde17 15
Geremia 0:75ec1b3cde17 16
Geremia 0:75ec1b3cde17 17
dreschpe 9:1749ae993cfe 18 UC1608::UC1608(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char *name , unsigned int LCDSIZE_X, unsigned int LCDSIZE_Y)
Geremia 0:75ec1b3cde17 19 : LCD(displayproto, port, CS, reset, DC, WR, RD, LCDSIZE_X, LCDSIZE_Y, IC_X_SEGS, IC_Y_COMS, name)
Geremia 0:75ec1b3cde17 20 {
Geremia 0:75ec1b3cde17 21 hw_reset();
Geremia 0:75ec1b3cde17 22 BusEnable(true);
Geremia 0:75ec1b3cde17 23 init();
Geremia 0:75ec1b3cde17 24 cls();
Geremia 0:75ec1b3cde17 25 set_orientation(1);
Geremia 0:75ec1b3cde17 26 locate(0,0);
Geremia 0:75ec1b3cde17 27 }
dreschpe 9:1749ae993cfe 28 UC1608::UC1608(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char *name, unsigned int LCDSIZE_X, unsigned int LCDSIZE_Y)
Geremia 1:ff019d22b275 29 : LCD(displayproto, Hz, mosi, miso, sclk, CS, reset, DC, LCDSIZE_X, LCDSIZE_Y, IC_X_SEGS, IC_Y_COMS, name)
Geremia 0:75ec1b3cde17 30 {
Geremia 0:75ec1b3cde17 31 hw_reset();
Geremia 0:75ec1b3cde17 32 BusEnable(true);
Geremia 0:75ec1b3cde17 33 init();
Geremia 0:75ec1b3cde17 34 cls();
Geremia 0:75ec1b3cde17 35 set_orientation(1);
Geremia 0:75ec1b3cde17 36 locate(0,0);
Geremia 0:75ec1b3cde17 37 }
Geremia 0:75ec1b3cde17 38 // reset and init the lcd controller
Geremia 0:75ec1b3cde17 39 void UC1608::init()
Geremia 0:75ec1b3cde17 40 {
Geremia 0:75ec1b3cde17 41 /* Start Initial Sequence ----------------------------------------------------*/
Geremia 0:75ec1b3cde17 42
Geremia 1:ff019d22b275 43 // wr_cmd8(0xE2); // sw reset
Geremia 0:75ec1b3cde17 44 wait_ms(15);
Geremia 0:75ec1b3cde17 45
Geremia 1:ff019d22b275 46 wr_cmd8(0x27); // Multiplex rate :128 set temperature consenpation 0%
Geremia 1:ff019d22b275 47 wr_cmd8(0xEA); //set bias:1/12bias
Geremia 0:75ec1b3cde17 48
Geremia 1:ff019d22b275 49 wr_cmd8(0xC4); // set mirror MX=1,MY=0 (controller->display SEGs wiring inverted)
Geremia 1:ff019d22b275 50 // wr_cmd8(0xA0); // ADC select seg0-seg223
Geremia 1:ff019d22b275 51 //wr_cmd8(0xA1); // ADC select seg223-seg0
Geremia 1:ff019d22b275 52 // wr_cmd8(0xC8); // SHL select com63-com0
Geremia 1:ff019d22b275 53 //wr_cmd8(0xC0); // SHL select com0-com63
Geremia 0:75ec1b3cde17 54
Geremia 1:ff019d22b275 55 wr_cmd8(0x2F); // //Power Control:internal, LCD capacitance 60nf-90nf
Geremia 0:75ec1b3cde17 56 wait_ms(10);
Geremia 0:75ec1b3cde17 57
Geremia 1:ff019d22b275 58 // wr_cmd8(0x81);//Set Gain and Potentiometer
Geremia 3:48f3282c2be8 59 // wr_cmd8(0x40|26);//Set Gain and Potentiometer xx xxxxxx
Geremia 3:48f3282c2be8 60 set_contrast(26);
Geremia 0:75ec1b3cde17 61
Geremia 1:ff019d22b275 62 wr_cmd8(0x88); //disable colum/page address wraparound
Geremia 1:ff019d22b275 63 wr_cmd8(0xA4); // LCD display ram (EntireDisplayOn disable)
Geremia 1:ff019d22b275 64 wr_cmd8(0x40); // start line = 0
Geremia 1:ff019d22b275 65 wr_cmd8(0xA6); // display normal (1 = illuminated)
Geremia 1:ff019d22b275 66 wr_cmd8(0xAF); // display ON
Geremia 0:75ec1b3cde17 67
Geremia 0:75ec1b3cde17 68 }
Geremia 0:75ec1b3cde17 69 ////////////////////////////////////////////////////////////////////
Geremia 0:75ec1b3cde17 70 // functions that overrides the standard ones implemented in LCD.cpp
Geremia 0:75ec1b3cde17 71 ////////////////////////////////////////////////////////////////////
Geremia 0:75ec1b3cde17 72 void UC1608::mirrorXY(mirror_t mode)
Geremia 0:75ec1b3cde17 73 {
Geremia 0:75ec1b3cde17 74 switch (mode)
Geremia 0:75ec1b3cde17 75 {
Geremia 0:75ec1b3cde17 76 case(NONE):
Geremia 1:ff019d22b275 77 wr_cmd8(0xC4); // this is in real X mirror command, but my display have SEGs wired inverted, so assume this is the default no-x-mirror
Geremia 0:75ec1b3cde17 78 break;
Geremia 0:75ec1b3cde17 79 case(X):
Geremia 1:ff019d22b275 80 wr_cmd8(0xC0);
Geremia 0:75ec1b3cde17 81 break;
Geremia 0:75ec1b3cde17 82 case(Y):
Geremia 1:ff019d22b275 83 wr_cmd8(0xCC);
Geremia 0:75ec1b3cde17 84 break;
Geremia 0:75ec1b3cde17 85 case(XY):
Geremia 1:ff019d22b275 86 wr_cmd8(0xC8);
Geremia 0:75ec1b3cde17 87 break;
Geremia 0:75ec1b3cde17 88 }
Geremia 0:75ec1b3cde17 89 }
Geremia 0:75ec1b3cde17 90 void UC1608::set_contrast(int o)
Geremia 0:75ec1b3cde17 91 {
Geremia 0:75ec1b3cde17 92 contrast = o;
Geremia 1:ff019d22b275 93 // wr_cmd8(0x81); // set volume
Geremia 1:ff019d22b275 94 // wr_cmd8(0x40|(o&0x3F));
Geremia 1:ff019d22b275 95 wr_cmd16(0x8140|(o&0x3F));
Geremia 0:75ec1b3cde17 96 }
Geremia 0:75ec1b3cde17 97 void UC1608::BusEnable(bool enable)
Geremia 0:75ec1b3cde17 98 {
Geremia 0:75ec1b3cde17 99 LCD::BusEnable(!enable); // crap IC has CS not inverted (active HIGH)
Geremia 0:75ec1b3cde17 100 }