USBMOUSE
Dependents: ESD_Project_USBMouse
Revision 0:78a4faee5b0f, committed 2015-12-13
- Comitter:
- priyankapashte
- Date:
- Sun Dec 13 10:04:36 2015 +0000
- Commit message:
- USBMouse File has been modified;
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/USBDescriptor.h Sun Dec 13 10:04:36 2015 +0000 @@ -0,0 +1,74 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +/* Standard descriptor types */ +#define DEVICE_DESCRIPTOR (1) +#define CONFIGURATION_DESCRIPTOR (2) +#define STRING_DESCRIPTOR (3) +#define INTERFACE_DESCRIPTOR (4) +#define ENDPOINT_DESCRIPTOR (5) +#define QUALIFIER_DESCRIPTOR (6) + +/* Standard descriptor lengths */ +#define DEVICE_DESCRIPTOR_LENGTH (0x12) +#define CONFIGURATION_DESCRIPTOR_LENGTH (0x09) +#define INTERFACE_DESCRIPTOR_LENGTH (0x09) +#define ENDPOINT_DESCRIPTOR_LENGTH (0x07) + + +/*string offset*/ +#define STRING_OFFSET_LANGID (0) +#define STRING_OFFSET_IMANUFACTURER (1) +#define STRING_OFFSET_IPRODUCT (2) +#define STRING_OFFSET_ISERIAL (3) +#define STRING_OFFSET_ICONFIGURATION (4) +#define STRING_OFFSET_IINTERFACE (5) + +/* USB Specification Release Number */ +#define USB_VERSION_2_0 (0x0200) + +/* Least/Most significant byte of short integer */ +#define LSB(n) ((n)&0xff) +#define MSB(n) (((n)&0xff00)>>8) + +/* Convert physical endpoint number to descriptor endpoint number */ +#define PHY_TO_DESC(endpoint) (((endpoint)>>1) | (((endpoint) & 1) ? 0x80:0)) + +/* bmAttributes in configuration descriptor */ +/* C_RESERVED must always be set */ +#define C_RESERVED (1U<<7) +#define C_SELF_POWERED (1U<<6) +#define C_REMOTE_WAKEUP (1U<<5) + +/* bMaxPower in configuration descriptor */ +#define C_POWER(mA) ((mA)/2) + +/* bmAttributes in endpoint descriptor */ +#define E_CONTROL (0x00) +#define E_ISOCHRONOUS (0x01) +#define E_BULK (0x02) +#define E_INTERRUPT (0x03) + +/* For isochronous endpoints only: */ +#define E_NO_SYNCHRONIZATION (0x00) +#define E_ASYNCHRONOUS (0x04) +#define E_ADAPTIVE (0x08) +#define E_SYNCHRONOUS (0x0C) +#define E_DATA (0x00) +#define E_FEEDBACK (0x10) +#define E_IMPLICIT_FEEDBACK (0x20)
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/USBDevice.cpp Sun Dec 13 10:04:36 2015 +0000 @@ -0,0 +1,1005 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +#include "stdint.h" + +#include "USBEndpoints.h" +#include "USBDevice.h" +#include "USBDescriptor.h" + +//#define DEBUG + +/* Device status */ +#define DEVICE_STATUS_SELF_POWERED (1U<<0) +#define DEVICE_STATUS_REMOTE_WAKEUP (1U<<1) + +/* Endpoint status */ +#define ENDPOINT_STATUS_HALT (1U<<0) + +/* Standard feature selectors */ +#define DEVICE_REMOTE_WAKEUP (1) +#define ENDPOINT_HALT (0) + +/* Macro to convert wIndex endpoint number to physical endpoint number */ +#define WINDEX_TO_PHYSICAL(endpoint) (((endpoint & 0x0f) << 1) + \ + ((endpoint & 0x80) ? 1 : 0)) + + +bool USBDevice::requestGetDescriptor(void) +{ + bool success = false; +#ifdef DEBUG + printf("get descr: type: %d\r\n", DESCRIPTOR_TYPE(transfer.setup.wValue)); +#endif + switch (DESCRIPTOR_TYPE(transfer.setup.wValue)) + { + case DEVICE_DESCRIPTOR: + if (deviceDesc() != NULL) + { + if ((deviceDesc()[0] == DEVICE_DESCRIPTOR_LENGTH) \ + && (deviceDesc()[1] == DEVICE_DESCRIPTOR)) + { +#ifdef DEBUG + printf("device descr\r\n"); +#endif + transfer.remaining = DEVICE_DESCRIPTOR_LENGTH; + transfer.ptr = deviceDesc(); + transfer.direction = DEVICE_TO_HOST; + success = true; + } + } + break; + case CONFIGURATION_DESCRIPTOR: + if (configurationDesc() != NULL) + { + if ((configurationDesc()[0] == CONFIGURATION_DESCRIPTOR_LENGTH) \ + && (configurationDesc()[1] == CONFIGURATION_DESCRIPTOR)) + { +#ifdef DEBUG + printf("conf descr request\r\n"); +#endif + /* Get wTotalLength */ + transfer.remaining = configurationDesc()[2] \ + | (configurationDesc()[3] << 8); + + transfer.ptr = configurationDesc(); + transfer.direction = DEVICE_TO_HOST; + success = true; + } + } + break; + case STRING_DESCRIPTOR: +#ifdef DEBUG + printf("str descriptor\r\n"); +#endif + switch (DESCRIPTOR_INDEX(transfer.setup.wValue)) + { + case STRING_OFFSET_LANGID: +#ifdef DEBUG + printf("1\r\n"); +#endif + transfer.remaining = stringLangidDesc()[0]; + transfer.ptr = stringLangidDesc(); + transfer.direction = DEVICE_TO_HOST; + success = true; + break; + case STRING_OFFSET_IMANUFACTURER: +#ifdef DEBUG + printf("2\r\n"); +#endif + transfer.remaining = stringImanufacturerDesc()[0]; + transfer.ptr = stringImanufacturerDesc(); + transfer.direction = DEVICE_TO_HOST; + success = true; + break; + case STRING_OFFSET_IPRODUCT: +#ifdef DEBUG + printf("3\r\n"); +#endif + transfer.remaining = stringIproductDesc()[0]; + transfer.ptr = stringIproductDesc(); + transfer.direction = DEVICE_TO_HOST; + success = true; + break; + case STRING_OFFSET_ISERIAL: +#ifdef DEBUG + printf("4\r\n"); +#endif + transfer.remaining = stringIserialDesc()[0]; + transfer.ptr = stringIserialDesc(); + transfer.direction = DEVICE_TO_HOST; + success = true; + break; + case STRING_OFFSET_ICONFIGURATION: +#ifdef DEBUG + printf("5\r\n"); +#endif + transfer.remaining = stringIConfigurationDesc()[0]; + transfer.ptr = stringIConfigurationDesc(); + transfer.direction = DEVICE_TO_HOST; + success = true; + break; + case STRING_OFFSET_IINTERFACE: +#ifdef DEBUG + printf("6\r\n"); +#endif + transfer.remaining = stringIinterfaceDesc()[0]; + transfer.ptr = stringIinterfaceDesc(); + transfer.direction = DEVICE_TO_HOST; + success = true; + break; + } + break; + case INTERFACE_DESCRIPTOR: +#ifdef DEBUG + printf("interface descr\r\n"); +#endif + case ENDPOINT_DESCRIPTOR: +#ifdef DEBUG + printf("endpoint descr\r\n"); +#endif + /* TODO: Support is optional, not implemented here */ + break; + default: +#ifdef DEBUG + printf("ERROR\r\n"); +#endif + break; + } + + return success; +} + +void USBDevice::decodeSetupPacket(uint8_t *data, SETUP_PACKET *packet) +{ + /* Fill in the elements of a SETUP_PACKET structure from raw data */ + packet->bmRequestType.dataTransferDirection = (data[0] & 0x80) >> 7; + packet->bmRequestType.Type = (data[0] & 0x60) >> 5; + packet->bmRequestType.Recipient = data[0] & 0x1f; + packet->bRequest = data[1]; + packet->wValue = (data[2] | (uint16_t)data[3] << 8); + packet->wIndex = (data[4] | (uint16_t)data[5] << 8); + packet->wLength = (data[6] | (uint16_t)data[7] << 8); +} + + +bool USBDevice::controlOut(void) +{ + /* Control transfer data OUT stage */ + uint8_t buffer[MAX_PACKET_SIZE_EP0]; + uint32_t packetSize; + + /* Check we should be transferring data OUT */ + if (transfer.direction != HOST_TO_DEVICE) + { +#if defined(TARGET_KL25Z) | defined(TARGET_KL43Z) | defined(TARGET_KL46Z) | defined(TARGET_K20D5M) | defined(TARGET_K64F) | defined(TARGET_K22F) | defined(TARGET_TEENSY3_1) + /* + * We seem to have a pending device-to-host transfer. The host must have + * sent a new control request without waiting for us to finish processing + * the previous one. This appears to happen when we're connected to certain + * USB 3.0 host chip set. Do a zeor-length send to tell the host we're not + * ready for the new request - that'll make it resend - and then just + * pretend we were successful here so that the pending transfer can finish. + */ + uint8_t buf[1] = { 0 }; + EP0write(buf, 0); + + /* execute our pending ttransfer */ + controlIn(); + + /* indicate success */ + return true; + #else + /* for other platforms, count on the HAL to handle this case */ + return false; + #endif + } + + /* Read from endpoint */ + packetSize = EP0getReadResult(buffer); + + /* Check if transfer size is valid */ + if (packetSize > transfer.remaining) + { + /* Too big */ + return false; + } + + /* Update transfer */ + transfer.ptr += packetSize; + transfer.remaining -= packetSize; + + /* Check if transfer has completed */ + if (transfer.remaining == 0) + { + /* Transfer completed */ + if (transfer.notify) + { + /* Notify class layer. */ + USBCallback_requestCompleted(buffer, packetSize); + transfer.notify = false; + } + /* Status stage */ + EP0write(NULL, 0); + } + else + { + EP0read(); + } + + return true; +} + +bool USBDevice::controlIn(void) +{ + /* Control transfer data IN stage */ + uint32_t packetSize; + + /* Check if transfer has completed (status stage transactions */ + /* also have transfer.remaining == 0) */ + if (transfer.remaining == 0) + { + if (transfer.zlp) + { + /* Send zero length packet */ + EP0write(NULL, 0); + transfer.zlp = false; + } + + /* Transfer completed */ + if (transfer.notify) + { + /* Notify class layer. */ + USBCallback_requestCompleted(NULL, 0); + transfer.notify = false; + } + + EP0read(); + EP0readStage(); + + /* Completed */ + return true; + } + + /* Check we should be transferring data IN */ + if (transfer.direction != DEVICE_TO_HOST) + { + return false; + } + + packetSize = transfer.remaining; + + if (packetSize > MAX_PACKET_SIZE_EP0) + { + packetSize = MAX_PACKET_SIZE_EP0; + } + + /* Write to endpoint */ + EP0write(transfer.ptr, packetSize); + + /* Update transfer */ + transfer.ptr += packetSize; + transfer.remaining -= packetSize; + + return true; +} + +bool USBDevice::requestSetAddress(void) +{ + /* Set the device address */ + setAddress(transfer.setup.wValue); + + if (transfer.setup.wValue == 0) + { + device.state = DEFAULT; + } + else + { + device.state = ADDRESS; + } + + return true; +} + +bool USBDevice::requestSetConfiguration(void) +{ + + device.configuration = transfer.setup.wValue; + /* Set the device configuration */ + if (device.configuration == 0) + { + /* Not configured */ + unconfigureDevice(); + device.state = ADDRESS; + } + else + { + if (USBCallback_setConfiguration(device.configuration)) + { + /* Valid configuration */ + configureDevice(); + device.state = CONFIGURED; + } + else + { + return false; + } + } + + return true; +} + +bool USBDevice::requestGetConfiguration(void) +{ + /* Send the device configuration */ + transfer.ptr = &device.configuration; + transfer.remaining = sizeof(device.configuration); + transfer.direction = DEVICE_TO_HOST; + return true; +} + +bool USBDevice::requestGetInterface(void) +{ + /* Return the selected alternate setting for an interface */ + + if (device.state != CONFIGURED) + { + return false; + } + + /* Send the alternate setting */ + transfer.setup.wIndex = currentInterface; + transfer.ptr = ¤tAlternate; + transfer.remaining = sizeof(currentAlternate); + transfer.direction = DEVICE_TO_HOST; + return true; +} + +bool USBDevice::requestSetInterface(void) +{ + bool success = false; + if(USBCallback_setInterface(transfer.setup.wIndex, transfer.setup.wValue)) + { + success = true; + currentInterface = transfer.setup.wIndex; + currentAlternate = transfer.setup.wValue; + } + return success; +} + +bool USBDevice::requestSetFeature() +{ + bool success = false; + + if (device.state != CONFIGURED) + { + /* Endpoint or interface must be zero */ + if (transfer.setup.wIndex != 0) + { + return false; + } + } + + switch (transfer.setup.bmRequestType.Recipient) + { + case DEVICE_RECIPIENT: + /* TODO: Remote wakeup feature not supported */ + break; + case ENDPOINT_RECIPIENT: + if (transfer.setup.wValue == ENDPOINT_HALT) + { + /* TODO: We should check that the endpoint number is valid */ + stallEndpoint( + WINDEX_TO_PHYSICAL(transfer.setup.wIndex)); + success = true; + } + break; + default: + break; + } + + return success; +} + +bool USBDevice::requestClearFeature() +{ + bool success = false; + + if (device.state != CONFIGURED) + { + /* Endpoint or interface must be zero */ + if (transfer.setup.wIndex != 0) + { + return false; + } + } + + switch (transfer.setup.bmRequestType.Recipient) + { + case DEVICE_RECIPIENT: + /* TODO: Remote wakeup feature not supported */ + break; + case ENDPOINT_RECIPIENT: + /* TODO: We should check that the endpoint number is valid */ + if (transfer.setup.wValue == ENDPOINT_HALT) + { + unstallEndpoint( WINDEX_TO_PHYSICAL(transfer.setup.wIndex)); + success = true; + } + break; + default: + break; + } + + return success; +} + +bool USBDevice::requestGetStatus(void) +{ + static uint16_t status; + bool success = false; + + if (device.state != CONFIGURED) + { + /* Endpoint or interface must be zero */ + if (transfer.setup.wIndex != 0) + { + return false; + } + } + + switch (transfer.setup.bmRequestType.Recipient) + { + case DEVICE_RECIPIENT: + /* TODO: Currently only supports self powered devices */ + status = DEVICE_STATUS_SELF_POWERED; + success = true; + break; + case INTERFACE_RECIPIENT: + status = 0; + success = true; + break; + case ENDPOINT_RECIPIENT: + /* TODO: We should check that the endpoint number is valid */ + if (getEndpointStallState( + WINDEX_TO_PHYSICAL(transfer.setup.wIndex))) + { + status = ENDPOINT_STATUS_HALT; + } + else + { + status = 0; + } + success = true; + break; + default: + break; + } + + if (success) + { + /* Send the status */ + transfer.ptr = (uint8_t *)&status; /* Assumes little endian */ + transfer.remaining = sizeof(status); + transfer.direction = DEVICE_TO_HOST; + } + + return success; +} + +bool USBDevice::requestSetup(void) +{ + bool success = false; + + /* Process standard requests */ + if ((transfer.setup.bmRequestType.Type == STANDARD_TYPE)) + { + switch (transfer.setup.bRequest) + { + case GET_STATUS: + success = requestGetStatus(); + break; + case CLEAR_FEATURE: + success = requestClearFeature(); + break; + case SET_FEATURE: + success = requestSetFeature(); + break; + case SET_ADDRESS: + success = requestSetAddress(); + break; + case GET_DESCRIPTOR: + success = requestGetDescriptor(); + break; + case SET_DESCRIPTOR: + /* TODO: Support is optional, not implemented here */ + success = false; + break; + case GET_CONFIGURATION: + success = requestGetConfiguration(); + break; + case SET_CONFIGURATION: + success = requestSetConfiguration(); + break; + case GET_INTERFACE: + success = requestGetInterface(); + break; + case SET_INTERFACE: + success = requestSetInterface(); + break; + default: + break; + } + } + + return success; +} + +bool USBDevice::controlSetup(void) +{ + bool success = false; + + /* Control transfer setup stage */ + uint8_t buffer[MAX_PACKET_SIZE_EP0]; + + EP0setup(buffer); + + /* Initialise control transfer state */ + decodeSetupPacket(buffer, &transfer.setup); + transfer.ptr = NULL; + transfer.remaining = 0; + transfer.direction = 0; + transfer.zlp = false; + transfer.notify = false; + +#ifdef DEBUG + printf("dataTransferDirection: %d\r\nType: %d\r\nRecipient: %d\r\nbRequest: %d\r\nwValue: %d\r\nwIndex: %d\r\nwLength: %d\r\n",transfer.setup.bmRequestType.dataTransferDirection, + transfer.setup.bmRequestType.Type, + transfer.setup.bmRequestType.Recipient, + transfer.setup.bRequest, + transfer.setup.wValue, + transfer.setup.wIndex, + transfer.setup.wLength); +#endif + + /* Class / vendor specific */ + success = USBCallback_request(); + + if (!success) + { + /* Standard requests */ + if (!requestSetup()) + { +#ifdef DEBUG + printf("fail!!!!\r\n"); +#endif + return false; + } + } + + /* Check transfer size and direction */ + if (transfer.setup.wLength>0) + { + if (transfer.setup.bmRequestType.dataTransferDirection \ + == DEVICE_TO_HOST) + { + /* IN data stage is required */ + if (transfer.direction != DEVICE_TO_HOST) + { + return false; + } + + /* Transfer must be less than or equal to the size */ + /* requested by the host */ + if (transfer.remaining > transfer.setup.wLength) + { + transfer.remaining = transfer.setup.wLength; + } + } + else + { + + /* OUT data stage is required */ + if (transfer.direction != HOST_TO_DEVICE) + { + return false; + } + + /* Transfer must be equal to the size requested by the host */ + if (transfer.remaining != transfer.setup.wLength) + { + return false; + } + } + } + else + { + /* No data stage; transfer size must be zero */ + if (transfer.remaining != 0) + { + return false; + } + } + + /* Data or status stage if applicable */ + if (transfer.setup.wLength>0) + { + if (transfer.setup.bmRequestType.dataTransferDirection \ + == DEVICE_TO_HOST) + { + /* Check if we'll need to send a zero length packet at */ + /* the end of this transfer */ + if (transfer.setup.wLength > transfer.remaining) + { + /* Device wishes to transfer less than host requested */ + if ((transfer.remaining % MAX_PACKET_SIZE_EP0) == 0) + { + /* Transfer is a multiple of EP0 max packet size */ + transfer.zlp = true; + } + } + + /* IN stage */ + controlIn(); + } + else + { + /* OUT stage */ + EP0read(); + } + } + else + { + /* Status stage */ + EP0write(NULL, 0); + } + + return true; +} + +void USBDevice::busReset(void) +{ + device.state = DEFAULT; + device.configuration = 0; + device.suspended = false; + + /* Call class / vendor specific busReset function */ + USBCallback_busReset(); +} + +void USBDevice::EP0setupCallback(void) +{ + /* Endpoint 0 setup event */ + if (!controlSetup()) + { + /* Protocol stall */ + EP0stall(); + } + + /* Return true if an OUT data stage is expected */ +} + +void USBDevice::EP0out(void) +{ + /* Endpoint 0 OUT data event */ + if (!controlOut()) + { + /* Protocol stall; this will stall both endpoints */ + EP0stall(); + } +} + +void USBDevice::EP0in(void) +{ +#ifdef DEBUG + printf("EP0IN\r\n"); +#endif + /* Endpoint 0 IN data event */ + if (!controlIn()) + { + /* Protocol stall; this will stall both endpoints */ + EP0stall(); + } +} + +bool USBDevice::configured(void) +{ + /* Returns true if device is in the CONFIGURED state */ + return (device.state == CONFIGURED); +} + +void USBDevice::connect(bool blocking) +{ + /* Connect device */ + USBHAL::connect(); + + if (blocking) { + /* Block if not configured */ + while (!configured()); + } +} + +void USBDevice::disconnect(void) +{ + /* Disconnect device */ + USBHAL::disconnect(); + + /* Set initial device state */ + device.state = POWERED; + device.configuration = 0; + device.suspended = false; +} + +CONTROL_TRANSFER * USBDevice::getTransferPtr(void) +{ + return &transfer; +} + +bool USBDevice::addEndpoint(uint8_t endpoint, uint32_t maxPacket) +{ + return realiseEndpoint(endpoint, maxPacket, 0); +} + +bool USBDevice::addRateFeedbackEndpoint(uint8_t endpoint, uint32_t maxPacket) +{ + /* For interrupt endpoints only */ + return realiseEndpoint(endpoint, maxPacket, RATE_FEEDBACK_MODE); +} + +uint8_t * USBDevice::findDescriptor(uint8_t descriptorType) +{ + /* Find a descriptor within the list of descriptors */ + /* following a configuration descriptor. */ + uint16_t wTotalLength; + uint8_t *ptr; + + if (configurationDesc() == NULL) + { + return NULL; + } + + /* Check this is a configuration descriptor */ + if ((configurationDesc()[0] != CONFIGURATION_DESCRIPTOR_LENGTH) \ + || (configurationDesc()[1] != CONFIGURATION_DESCRIPTOR)) + { + return NULL; + } + + wTotalLength = configurationDesc()[2] | (configurationDesc()[3] << 8); + + /* Check there are some more descriptors to follow */ + if (wTotalLength <= (CONFIGURATION_DESCRIPTOR_LENGTH+2)) + /* +2 is for bLength and bDescriptorType of next descriptor */ + { + return NULL; + } + + /* Start at first descriptor after the configuration descriptor */ + ptr = &(configurationDesc()[CONFIGURATION_DESCRIPTOR_LENGTH]); + + do { + if (ptr[1] /* bDescriptorType */ == descriptorType) + { + /* Found */ + return ptr; + } + + /* Skip to next descriptor */ + ptr += ptr[0]; /* bLength */ + } while (ptr < (configurationDesc() + wTotalLength)); + + /* Reached end of the descriptors - not found */ + return NULL; +} + + +void USBDevice::connectStateChanged(unsigned int connected) +{ +} + +void USBDevice::suspendStateChanged(unsigned int suspended) +{ +} + + +USBDevice::USBDevice(uint16_t vendor_id, uint16_t product_id, uint16_t product_release){ + VENDOR_ID = vendor_id; + PRODUCT_ID = product_id; + PRODUCT_RELEASE = product_release; + + /* Set initial device state */ + device.state = POWERED; + device.configuration = 0; + device.suspended = false; +}; + + +bool USBDevice::readStart(uint8_t endpoint, uint32_t maxSize) +{ + return endpointRead(endpoint, maxSize) == EP_PENDING; +} + + +bool USBDevice::write(uint8_t endpoint, uint8_t * buffer, uint32_t size, uint32_t maxSize) +{ + EP_STATUS result; + + if (size > maxSize) + { + return false; + } + + + if(!configured()) { + return false; + } + + /* Send report */ + result = endpointWrite(endpoint, buffer, size); + + if (result != EP_PENDING) + { + return false; + } + + /* Wait for completion */ + do { + result = endpointWriteResult(endpoint); + } while ((result == EP_PENDING) && configured()); + + return (result == EP_COMPLETED); +} + + +bool USBDevice::writeNB(uint8_t endpoint, uint8_t * buffer, uint32_t size, uint32_t maxSize) +{ + EP_STATUS result; + + if (size > maxSize) + { + return false; + } + + if(!configured()) { + return false; + } + + /* Send report */ + result = endpointWrite(endpoint, buffer, size); + + if (result != EP_PENDING) + { + return false; + } + + result = endpointWriteResult(endpoint); + + return (result == EP_COMPLETED); +} + + + +bool USBDevice::readEP(uint8_t endpoint, uint8_t * buffer, uint32_t * size, uint32_t maxSize) +{ + EP_STATUS result; + + if(!configured()) { + return false; + } + + /* Wait for completion */ + do { + result = endpointReadResult(endpoint, buffer, size); + } while ((result == EP_PENDING) && configured()); + + return (result == EP_COMPLETED); +} + + +bool USBDevice::readEP_NB(uint8_t endpoint, uint8_t * buffer, uint32_t * size, uint32_t maxSize) +{ + EP_STATUS result; + + if(!configured()) { + return false; + } + + result = endpointReadResult(endpoint, buffer, size); + + return (result == EP_COMPLETED); +} + + + +uint8_t * USBDevice::deviceDesc() { + static uint8_t deviceDescriptor[] = { + DEVICE_DESCRIPTOR_LENGTH, /* bLength */ + DEVICE_DESCRIPTOR, /* bDescriptorType */ + LSB(USB_VERSION_2_0), /* bcdUSB (LSB) */ + MSB(USB_VERSION_2_0), /* bcdUSB (MSB) */ + 0x00, /* bDeviceClass */ + 0x00, /* bDeviceSubClass */ + 0x00, /* bDeviceprotocol */ + MAX_PACKET_SIZE_EP0, /* bMaxPacketSize0 */ + (uint8_t)(LSB(VENDOR_ID)), /* idVendor (LSB) */ + (uint8_t)(MSB(VENDOR_ID)), /* idVendor (MSB) */ + (uint8_t)(LSB(PRODUCT_ID)), /* idProduct (LSB) */ + (uint8_t)(MSB(PRODUCT_ID)), /* idProduct (MSB) */ + (uint8_t)(LSB(PRODUCT_RELEASE)), /* bcdDevice (LSB) */ + (uint8_t)(MSB(PRODUCT_RELEASE)), /* bcdDevice (MSB) */ + STRING_OFFSET_IMANUFACTURER, /* iManufacturer */ + STRING_OFFSET_IPRODUCT, /* iProduct */ + STRING_OFFSET_ISERIAL, /* iSerialNumber */ + 0x01 /* bNumConfigurations */ + }; + return deviceDescriptor; +} + +uint8_t * USBDevice::stringLangidDesc() { + static uint8_t stringLangidDescriptor[] = { + 0x04, /*bLength*/ + STRING_DESCRIPTOR, /*bDescriptorType 0x03*/ + 0x09,0x04, /*bString Lang ID - 0x0409 - English*/ + }; + return stringLangidDescriptor; +} + +uint8_t * USBDevice::stringImanufacturerDesc() { + static uint8_t stringImanufacturerDescriptor[] = { + 0x12, /*bLength*/ + STRING_DESCRIPTOR, /*bDescriptorType 0x03*/ + 'm',0,'b',0,'e',0,'d',0,'.',0,'o',0,'r',0,'g',0, /*bString iManufacturer - mbed.org*/ + }; + return stringImanufacturerDescriptor; +} + +uint8_t * USBDevice::stringIserialDesc() { + static uint8_t stringIserialDescriptor[] = { + 0x16, /*bLength*/ + STRING_DESCRIPTOR, /*bDescriptorType 0x03*/ + '0',0,'1',0,'2',0,'3',0,'4',0,'5',0,'6',0,'7',0,'8',0,'9',0, /*bString iSerial - 0123456789*/ + }; + return stringIserialDescriptor; +} + +uint8_t * USBDevice::stringIConfigurationDesc() { + static uint8_t stringIconfigurationDescriptor[] = { + 0x06, /*bLength*/ + STRING_DESCRIPTOR, /*bDescriptorType 0x03*/ + '0',0,'1',0, /*bString iConfiguration - 01*/ + }; + return stringIconfigurationDescriptor; +} + +uint8_t * USBDevice::stringIinterfaceDesc() { + static uint8_t stringIinterfaceDescriptor[] = { + 0x08, /*bLength*/ + STRING_DESCRIPTOR, /*bDescriptorType 0x03*/ + 'U',0,'S',0,'B',0, /*bString iInterface - USB*/ + }; + return stringIinterfaceDescriptor; +} + +uint8_t * USBDevice::stringIproductDesc() { + static uint8_t stringIproductDescriptor[] = { + 0x16, /*bLength*/ + STRING_DESCRIPTOR, /*bDescriptorType 0x03*/ + 'U',0,'S',0,'B',0,' ',0,'D',0,'E',0,'V',0,'I',0,'C',0,'E',0 /*bString iProduct - USB DEVICE*/ + }; + return stringIproductDescriptor; +}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/USBDevice.h Sun Dec 13 10:04:36 2015 +0000 @@ -0,0 +1,271 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +#ifndef USBDEVICE_H +#define USBDEVICE_H + +#include "mbed.h" +#include "USBDevice_Types.h" +#include "USBHAL.h" + +class USBDevice: public USBHAL +{ +public: + USBDevice(uint16_t vendor_id, uint16_t product_id, uint16_t product_release); + + /* + * Check if the device is configured + * + * @returns true if configured, false otherwise + */ + bool configured(void); + + /* + * Connect a device + * + * @param blocking: block if not configured + */ + void connect(bool blocking = true); + + /* + * Disconnect a device + */ + void disconnect(void); + + /* + * Add an endpoint + * + * @param endpoint endpoint which will be added + * @param maxPacket Maximum size of a packet which can be sent for this endpoint + * @returns true if successful, false otherwise + */ + bool addEndpoint(uint8_t endpoint, uint32_t maxPacket); + + /* + * Start a reading on a certain endpoint. + * You can access the result of the reading by USBDevice_read + * + * @param endpoint endpoint which will be read + * @param maxSize the maximum length that can be read + * @return true if successful + */ + bool readStart(uint8_t endpoint, uint32_t maxSize); + + /* + * Read a certain endpoint. Before calling this function, USBUSBDevice_readStart + * must be called. + * + * Warning: blocking + * + * @param endpoint endpoint which will be read + * @param buffer buffer will be filled with the data received + * @param size the number of bytes read will be stored in *size + * @param maxSize the maximum length that can be read + * @returns true if successful + */ + bool readEP(uint8_t endpoint, uint8_t * buffer, uint32_t * size, uint32_t maxSize); + + /* + * Read a certain endpoint. + * + * Warning: non blocking + * + * @param endpoint endpoint which will be read + * @param buffer buffer will be filled with the data received (if data are available) + * @param size the number of bytes read will be stored in *size + * @param maxSize the maximum length that can be read + * @returns true if successful + */ + bool readEP_NB(uint8_t endpoint, uint8_t * buffer, uint32_t * size, uint32_t maxSize); + + /* + * Write a certain endpoint. + * + * Warning: blocking + * + * @param endpoint endpoint to write + * @param buffer data contained in buffer will be write + * @param size the number of bytes to write + * @param maxSize the maximum length that can be written on this endpoint + */ + bool write(uint8_t endpoint, uint8_t * buffer, uint32_t size, uint32_t maxSize); + + + /* + * Write a certain endpoint. + * + * Warning: non blocking + * + * @param endpoint endpoint to write + * @param buffer data contained in buffer will be write + * @param size the number of bytes to write + * @param maxSize the maximum length that can be written on this endpoint + */ + bool writeNB(uint8_t endpoint, uint8_t * buffer, uint32_t size, uint32_t maxSize); + + + /* + * Called by USBDevice layer on bus reset. Warning: Called in ISR context + * + * May be used to reset state + */ + virtual void USBCallback_busReset(void) {}; + + /* + * Called by USBDevice on Endpoint0 request. Warning: Called in ISR context + * This is used to handle extensions to standard requests + * and class specific requests + * + * @returns true if class handles this request + */ + virtual bool USBCallback_request() { return false; }; + + /* + * Called by USBDevice on Endpoint0 request completion + * if the 'notify' flag has been set to true. Warning: Called in ISR context + * + * In this case it is used to indicate that a HID report has + * been received from the host on endpoint 0 + * + * @param buf buffer received on endpoint 0 + * @param length length of this buffer + */ + virtual void USBCallback_requestCompleted(uint8_t * buf, uint32_t length) {}; + + /* + * Called by USBDevice layer. Set configuration of the device. + * For instance, you can add all endpoints that you need on this function. + * + * @param configuration Number of the configuration + */ + virtual bool USBCallback_setConfiguration(uint8_t configuration) { return false; }; + + /* + * Called by USBDevice layer. Set interface/alternate of the device. + * + * @param interface Number of the interface to be configured + * @param alternate Number of the alternate to be configured + * @returns true if class handles this request + */ + virtual bool USBCallback_setInterface(uint16_t interface, uint8_t alternate) { return false; }; + + /* + * Get device descriptor. Warning: this method has to store the length of the report descriptor in reportLength. + * + * @returns pointer to the device descriptor + */ + virtual uint8_t * deviceDesc(); + + /* + * Get configuration descriptor + * + * @returns pointer to the configuration descriptor + */ + virtual uint8_t * configurationDesc(){return NULL;}; + + /* + * Get string lang id descriptor + * + * @return pointer to the string lang id descriptor + */ + virtual uint8_t * stringLangidDesc(); + + /* + * Get string manufacturer descriptor + * + * @returns pointer to the string manufacturer descriptor + */ + virtual uint8_t * stringImanufacturerDesc(); + + /* + * Get string product descriptor + * + * @returns pointer to the string product descriptor + */ + virtual uint8_t * stringIproductDesc(); + + /* + * Get string serial descriptor + * + * @returns pointer to the string serial descriptor + */ + virtual uint8_t * stringIserialDesc(); + + /* + * Get string configuration descriptor + * + * @returns pointer to the string configuration descriptor + */ + virtual uint8_t * stringIConfigurationDesc(); + + /* + * Get string interface descriptor + * + * @returns pointer to the string interface descriptor + */ + virtual uint8_t * stringIinterfaceDesc(); + + /* + * Get the length of the report descriptor + * + * @returns length of the report descriptor + */ + virtual uint16_t reportDescLength() { return 0; }; + + + +protected: + virtual void busReset(void); + virtual void EP0setupCallback(void); + virtual void EP0out(void); + virtual void EP0in(void); + virtual void connectStateChanged(unsigned int connected); + virtual void suspendStateChanged(unsigned int suspended); + uint8_t * findDescriptor(uint8_t descriptorType); + CONTROL_TRANSFER * getTransferPtr(void); + + uint16_t VENDOR_ID; + uint16_t PRODUCT_ID; + uint16_t PRODUCT_RELEASE; + +private: + bool addRateFeedbackEndpoint(uint8_t endpoint, uint32_t maxPacket); + bool requestGetDescriptor(void); + bool controlOut(void); + bool controlIn(void); + bool requestSetAddress(void); + bool requestSetConfiguration(void); + bool requestSetFeature(void); + bool requestClearFeature(void); + bool requestGetStatus(void); + bool requestSetup(void); + bool controlSetup(void); + void decodeSetupPacket(uint8_t *data, SETUP_PACKET *packet); + bool requestGetConfiguration(void); + bool requestGetInterface(void); + bool requestSetInterface(void); + + CONTROL_TRANSFER transfer; + USB_DEVICE device; + + uint16_t currentInterface; + uint8_t currentAlternate; +}; + + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/USBDevice_Types.h Sun Dec 13 10:04:36 2015 +0000 @@ -0,0 +1,83 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +#ifndef USBDEVICE_TYPES_H +#define USBDEVICE_TYPES_H + +/* Standard requests */ +#define GET_STATUS (0) +#define CLEAR_FEATURE (1) +#define SET_FEATURE (3) +#define SET_ADDRESS (5) +#define GET_DESCRIPTOR (6) +#define SET_DESCRIPTOR (7) +#define GET_CONFIGURATION (8) +#define SET_CONFIGURATION (9) +#define GET_INTERFACE (10) +#define SET_INTERFACE (11) + +/* bmRequestType.dataTransferDirection */ +#define HOST_TO_DEVICE (0) +#define DEVICE_TO_HOST (1) + +/* bmRequestType.Type*/ +#define STANDARD_TYPE (0) +#define CLASS_TYPE (1) +#define VENDOR_TYPE (2) +#define RESERVED_TYPE (3) + +/* bmRequestType.Recipient */ +#define DEVICE_RECIPIENT (0) +#define INTERFACE_RECIPIENT (1) +#define ENDPOINT_RECIPIENT (2) +#define OTHER_RECIPIENT (3) + +/* Descriptors */ +#define DESCRIPTOR_TYPE(wValue) (wValue >> 8) +#define DESCRIPTOR_INDEX(wValue) (wValue & 0xff) + +typedef struct { + struct { + uint8_t dataTransferDirection; + uint8_t Type; + uint8_t Recipient; + } bmRequestType; + uint8_t bRequest; + uint16_t wValue; + uint16_t wIndex; + uint16_t wLength; +} SETUP_PACKET; + +typedef struct { + SETUP_PACKET setup; + uint8_t *ptr; + uint32_t remaining; + uint8_t direction; + bool zlp; + bool notify; +} CONTROL_TRANSFER; + +typedef enum {ATTACHED, POWERED, DEFAULT, ADDRESS, CONFIGURED} DEVICE_STATE; + +typedef struct { + volatile DEVICE_STATE state; + uint8_t configuration; + bool suspended; +} USB_DEVICE; + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/USBEndpoints.h Sun Dec 13 10:04:36 2015 +0000 @@ -0,0 +1,58 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +#ifndef USBENDPOINTS_H +#define USBENDPOINTS_H + +/* SETUP packet size */ +#define SETUP_PACKET_SIZE (8) + +/* Options flags for configuring endpoints */ +#define DEFAULT_OPTIONS (0) +#define SINGLE_BUFFERED (1U << 0) +#define ISOCHRONOUS (1U << 1) +#define RATE_FEEDBACK_MODE (1U << 2) /* Interrupt endpoints only */ + +/* Endpoint transfer status, for endpoints > 0 */ +typedef enum { + EP_COMPLETED, /* Transfer completed */ + EP_PENDING, /* Transfer in progress */ + EP_INVALID, /* Invalid parameter */ + EP_STALLED, /* Endpoint stalled */ +} EP_STATUS; + +/* Include configuration for specific target */ +#if defined(TARGET_LPC1768) || defined(TARGET_LPC2368) || defined(TARGET_LPC4088) || defined(TARGET_LPC2460) || defined(TARGET_LPC4088_DM) +#include "USBEndpoints_LPC17_LPC23.h" +#elif defined(TARGET_LPC11UXX) || defined(TARGET_LPC1347) || defined (TARGET_LPC11U6X) || defined (TARGET_LPC1549) +#include "USBEndpoints_LPC11U.h" +#elif defined(TARGET_KL25Z) | defined(TARGET_KL26Z) | defined(TARGET_KL43Z) | defined(TARGET_KL46Z) | defined(TARGET_K20D50M) | defined(TARGET_K64F) | defined(TARGET_K22F) | defined(TARGET_TEENSY3_1) +#include "USBEndpoints_KL25Z.h" +#elif defined (TARGET_STM32F4) +#include "USBEndpoints_STM32F4.h" +#elif defined (TARGET_RZ_A1H) +#include "USBEndpoints_RZ_A1H.h" +#elif defined(TARGET_Maxim) +#include "USBEndpoints_Maxim.h" +#elif defined(TARGET_EFM32GG_STK3700) || defined(TARGET_EFM32LG_STK3600) || defined(TARGET_EFM32WG_STK3800) || defined(TARGET_EFM32HG_STK3400) +#include "USBEndpoints_EFM32.h" +#else +#error "Unknown target type" +#endif + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/USBEndpoints_KL25Z.h Sun Dec 13 10:04:36 2015 +0000 @@ -0,0 +1,93 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +#define NUMBER_OF_LOGICAL_ENDPOINTS (16) +#define NUMBER_OF_PHYSICAL_ENDPOINTS (NUMBER_OF_LOGICAL_ENDPOINTS * 2) + +/* Define physical endpoint numbers */ + +/* Endpoint No. */ +/* ---------------- */ +#define EP0OUT (0) +#define EP0IN (1) +#define EP1OUT (2) +#define EP1IN (3) +#define EP2OUT (4) +#define EP2IN (5) +#define EP3OUT (6) +#define EP3IN (7) +#define EP4OUT (8) +#define EP4IN (9) +#define EP5OUT (10) +#define EP5IN (11) +#define EP6OUT (12) +#define EP6IN (13) +#define EP7OUT (14) +#define EP7IN (15) +#define EP8OUT (16) +#define EP8IN (17) +#define EP9OUT (18) +#define EP9IN (19) +#define EP10OUT (20) +#define EP10IN (21) +#define EP11OUT (22) +#define EP11IN (23) +#define EP12OUT (24) +#define EP12IN (25) +#define EP13OUT (26) +#define EP13IN (27) +#define EP14OUT (28) +#define EP14IN (29) +#define EP15OUT (30) +#define EP15IN (31) + +/* Maximum Packet sizes */ + +#define MAX_PACKET_SIZE_EP0 (64) +#define MAX_PACKET_SIZE_EP1 (64) +#define MAX_PACKET_SIZE_EP2 (64) +#define MAX_PACKET_SIZE_EP3 (1023) +#define MAX_PACKET_SIZE_EP4 (64) +#define MAX_PACKET_SIZE_EP5 (64) +#define MAX_PACKET_SIZE_EP6 (64) +#define MAX_PACKET_SIZE_EP7 (64) +#define MAX_PACKET_SIZE_EP8 (64) +#define MAX_PACKET_SIZE_EP9 (64) +#define MAX_PACKET_SIZE_EP10 (64) +#define MAX_PACKET_SIZE_EP11 (64) +#define MAX_PACKET_SIZE_EP12 (64) +#define MAX_PACKET_SIZE_EP13 (64) +#define MAX_PACKET_SIZE_EP14 (64) +#define MAX_PACKET_SIZE_EP15 (64) + +/* Generic endpoints - intended to be portable accross devices */ +/* and be suitable for simple USB devices. */ + +/* Bulk endpoints */ +#define EPBULK_OUT (EP2OUT) +#define EPBULK_IN (EP2IN) +/* Interrupt endpoints */ +#define EPINT_OUT (EP1OUT) +#define EPINT_IN (EP1IN) +/* Isochronous endpoints */ +#define EPISO_OUT (EP3OUT) +#define EPISO_IN (EP3IN) + +#define MAX_PACKET_SIZE_EPBULK (MAX_PACKET_SIZE_EP2) +#define MAX_PACKET_SIZE_EPINT (MAX_PACKET_SIZE_EP1) +#define MAX_PACKET_SIZE_EPISO (MAX_PACKET_SIZE_EP3)
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/USBHAL.h Sun Dec 13 10:04:36 2015 +0000 @@ -0,0 +1,121 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +#ifndef USBBUSINTERFACE_H +#define USBBUSINTERFACE_H + +#include "mbed.h" +#include "USBEndpoints.h" +#include "toolchain.h" + +//#ifdef __GNUC__ +//#define __packed __attribute__ ((__packed__)) +//#endif + +class USBHAL { +public: + /* Configuration */ + USBHAL(); + ~USBHAL(); + void connect(void); + void disconnect(void); + void configureDevice(void); + void unconfigureDevice(void); + void setAddress(uint8_t address); + void remoteWakeup(void); + + /* Endpoint 0 */ + void EP0setup(uint8_t *buffer); + void EP0read(void); + void EP0readStage(void); + uint32_t EP0getReadResult(uint8_t *buffer); + void EP0write(uint8_t *buffer, uint32_t size); + void EP0getWriteResult(void); + void EP0stall(void); + + /* Other endpoints */ + EP_STATUS endpointRead(uint8_t endpoint, uint32_t maximumSize); + EP_STATUS endpointReadResult(uint8_t endpoint, uint8_t *data, uint32_t *bytesRead); + EP_STATUS endpointWrite(uint8_t endpoint, uint8_t *data, uint32_t size); + EP_STATUS endpointWriteResult(uint8_t endpoint); + void stallEndpoint(uint8_t endpoint); + void unstallEndpoint(uint8_t endpoint); + bool realiseEndpoint(uint8_t endpoint, uint32_t maxPacket, uint32_t options); + bool getEndpointStallState(unsigned char endpoint); + uint32_t endpointReadcore(uint8_t endpoint, uint8_t *buffer); + +protected: + virtual void busReset(void){}; + virtual void EP0setupCallback(void){}; + virtual void EP0out(void){}; + virtual void EP0in(void){}; + virtual void connectStateChanged(unsigned int connected){}; + virtual void suspendStateChanged(unsigned int suspended){}; + virtual void SOF(int frameNumber){}; + + virtual bool EP1_OUT_callback(){return false;}; + virtual bool EP1_IN_callback(){return false;}; + virtual bool EP2_OUT_callback(){return false;}; + virtual bool EP2_IN_callback(){return false;}; + virtual bool EP3_OUT_callback(){return false;}; + virtual bool EP3_IN_callback(){return false;}; +#if !defined(TARGET_STM32F4) + virtual bool EP4_OUT_callback(){return false;}; + virtual bool EP4_IN_callback(){return false;}; +#if !defined(TARGET_LPC11U24) + virtual bool EP5_OUT_callback(){return false;}; + virtual bool EP5_IN_callback(){return false;}; + virtual bool EP6_OUT_callback(){return false;}; + virtual bool EP6_IN_callback(){return false;}; + virtual bool EP7_OUT_callback(){return false;}; + virtual bool EP7_IN_callback(){return false;}; + virtual bool EP8_OUT_callback(){return false;}; + virtual bool EP8_IN_callback(){return false;}; + virtual bool EP9_OUT_callback(){return false;}; + virtual bool EP9_IN_callback(){return false;}; + virtual bool EP10_OUT_callback(){return false;}; + virtual bool EP10_IN_callback(){return false;}; + virtual bool EP11_OUT_callback(){return false;}; + virtual bool EP11_IN_callback(){return false;}; + virtual bool EP12_OUT_callback(){return false;}; + virtual bool EP12_IN_callback(){return false;}; + virtual bool EP13_OUT_callback(){return false;}; + virtual bool EP13_IN_callback(){return false;}; + virtual bool EP14_OUT_callback(){return false;}; + virtual bool EP14_IN_callback(){return false;}; + virtual bool EP15_OUT_callback(){return false;}; + virtual bool EP15_IN_callback(){return false;}; +#endif +#endif + +private: + void usbisr(void); + static void _usbisr(void); + static USBHAL * instance; + +#if defined(TARGET_LPC11U24) + bool (USBHAL::*epCallback[10 - 2])(void); +#elif defined(TARGET_STM32F4XX) + bool (USBHAL::*epCallback[8 - 2])(void); +#else + bool (USBHAL::*epCallback[32 - 2])(void); +#endif + + +}; +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/USBHAL_KL25Z.cpp Sun Dec 13 10:04:36 2015 +0000 @@ -0,0 +1,537 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +#if defined(TARGET_KL25Z) | defined(TARGET_KL46Z) | defined(TARGET_K20D5M) | defined(TARGET_K64F) + +#include "USBHAL.h" + +USBHAL * USBHAL::instance; + +static volatile int epComplete = 0; + +// Convert physical endpoint number to register bit +#define EP(endpoint) (1<<(endpoint)) + +// Convert physical to logical +#define PHY_TO_LOG(endpoint) ((endpoint)>>1) + +// Get endpoint direction +#define IN_EP(endpoint) ((endpoint) & 1U ? true : false) +#define OUT_EP(endpoint) ((endpoint) & 1U ? false : true) + +#define BD_OWN_MASK (1<<7) +#define BD_DATA01_MASK (1<<6) +#define BD_KEEP_MASK (1<<5) +#define BD_NINC_MASK (1<<4) +#define BD_DTS_MASK (1<<3) +#define BD_STALL_MASK (1<<2) + +#define TX 1 +#define RX 0 +#define ODD 0 +#define EVEN 1 +// this macro waits a physical endpoint number +#define EP_BDT_IDX(ep, dir, odd) (((ep * 4) + (2 * dir) + (1 * odd))) + +#define SETUP_TOKEN 0x0D +#define IN_TOKEN 0x09 +#define OUT_TOKEN 0x01 +#define TOK_PID(idx) ((bdt[idx].info >> 2) & 0x0F) + +// for each endpt: 8 bytes +typedef struct BDT { + uint8_t info; // BD[0:7] + uint8_t dummy; // RSVD: BD[8:15] + uint16_t byte_count; // BD[16:32] + uint32_t address; // Addr +} BDT; + + +// there are: +// * 16 bidirectionnal endpt -> 32 physical endpt +// * as there are ODD and EVEN buffer -> 32*2 bdt +__attribute__((__aligned__(512))) BDT bdt[NUMBER_OF_PHYSICAL_ENDPOINTS * 2]; +uint8_t * endpoint_buffer[(NUMBER_OF_PHYSICAL_ENDPOINTS - 2) * 2]; +uint8_t * endpoint_buffer_iso[2*2]; + +static uint8_t set_addr = 0; +static uint8_t addr = 0; + +static uint32_t Data1 = 0x55555555; + +static uint32_t frameNumber() { + return((USB0->FRMNUML | (USB0->FRMNUMH << 8)) & 0x07FF); +} + +uint32_t USBHAL::endpointReadcore(uint8_t endpoint, uint8_t *buffer) { + return 0; +} + +USBHAL::USBHAL(void) { + // Disable IRQ + NVIC_DisableIRQ(USB0_IRQn); + +#if defined(TARGET_K64F) + MPU->CESR=0; +#endif + // fill in callback array + epCallback[0] = &USBHAL::EP1_OUT_callback; + epCallback[1] = &USBHAL::EP1_IN_callback; + epCallback[2] = &USBHAL::EP2_OUT_callback; + epCallback[3] = &USBHAL::EP2_IN_callback; + epCallback[4] = &USBHAL::EP3_OUT_callback; + epCallback[5] = &USBHAL::EP3_IN_callback; + epCallback[6] = &USBHAL::EP4_OUT_callback; + epCallback[7] = &USBHAL::EP4_IN_callback; + epCallback[8] = &USBHAL::EP5_OUT_callback; + epCallback[9] = &USBHAL::EP5_IN_callback; + epCallback[10] = &USBHAL::EP6_OUT_callback; + epCallback[11] = &USBHAL::EP6_IN_callback; + epCallback[12] = &USBHAL::EP7_OUT_callback; + epCallback[13] = &USBHAL::EP7_IN_callback; + epCallback[14] = &USBHAL::EP8_OUT_callback; + epCallback[15] = &USBHAL::EP8_IN_callback; + epCallback[16] = &USBHAL::EP9_OUT_callback; + epCallback[17] = &USBHAL::EP9_IN_callback; + epCallback[18] = &USBHAL::EP10_OUT_callback; + epCallback[19] = &USBHAL::EP10_IN_callback; + epCallback[20] = &USBHAL::EP11_OUT_callback; + epCallback[21] = &USBHAL::EP11_IN_callback; + epCallback[22] = &USBHAL::EP12_OUT_callback; + epCallback[23] = &USBHAL::EP12_IN_callback; + epCallback[24] = &USBHAL::EP13_OUT_callback; + epCallback[25] = &USBHAL::EP13_IN_callback; + epCallback[26] = &USBHAL::EP14_OUT_callback; + epCallback[27] = &USBHAL::EP14_IN_callback; + epCallback[28] = &USBHAL::EP15_OUT_callback; + epCallback[29] = &USBHAL::EP15_IN_callback; + + + // choose usb src as PLL + SIM->SOPT2 |= (SIM_SOPT2_USBSRC_MASK | SIM_SOPT2_PLLFLLSEL_MASK); + + // enable OTG clock + SIM->SCGC4 |= SIM_SCGC4_USBOTG_MASK; + + // Attach IRQ + instance = this; + NVIC_SetVector(USB0_IRQn, (uint32_t)&_usbisr); + NVIC_EnableIRQ(USB0_IRQn); + + // USB Module Configuration + // Reset USB Module + USB0->USBTRC0 |= USB_USBTRC0_USBRESET_MASK; + while(USB0->USBTRC0 & USB_USBTRC0_USBRESET_MASK); + + // Set BDT Base Register + USB0->BDTPAGE1 = (uint8_t)((uint32_t)bdt>>8); + USB0->BDTPAGE2 = (uint8_t)((uint32_t)bdt>>16); + USB0->BDTPAGE3 = (uint8_t)((uint32_t)bdt>>24); + + // Clear interrupt flag + USB0->ISTAT = 0xff; + + // USB Interrupt Enablers + USB0->INTEN |= USB_INTEN_TOKDNEEN_MASK | + USB_INTEN_SOFTOKEN_MASK | + USB_INTEN_ERROREN_MASK | + USB_INTEN_USBRSTEN_MASK; + + // Disable weak pull downs + USB0->USBCTRL &= ~(USB_USBCTRL_PDE_MASK | USB_USBCTRL_SUSP_MASK); + + USB0->USBTRC0 |= 0x40; +} + +USBHAL::~USBHAL(void) { } + +void USBHAL::connect(void) { + // enable USB + USB0->CTL |= USB_CTL_USBENSOFEN_MASK; + // Pull up enable + USB0->CONTROL |= USB_CONTROL_DPPULLUPNONOTG_MASK; +} + +void USBHAL::disconnect(void) { + // disable USB + USB0->CTL &= ~USB_CTL_USBENSOFEN_MASK; + // Pull up disable + USB0->CONTROL &= ~USB_CONTROL_DPPULLUPNONOTG_MASK; + + //Free buffers if required: + for (int i = 0; i<(NUMBER_OF_PHYSICAL_ENDPOINTS - 2) * 2; i++) { + free(endpoint_buffer[i]); + endpoint_buffer[i] = NULL; + } + free(endpoint_buffer_iso[2]); + endpoint_buffer_iso[2] = NULL; + free(endpoint_buffer_iso[0]); + endpoint_buffer_iso[0] = NULL; +} + +void USBHAL::configureDevice(void) { + // not needed +} + +void USBHAL::unconfigureDevice(void) { + // not needed +} + +void USBHAL::setAddress(uint8_t address) { + // we don't set the address now otherwise the usb controller does not ack + // we set a flag instead + // see usbisr when an IN token is received + set_addr = 1; + addr = address; +} + +bool USBHAL::realiseEndpoint(uint8_t endpoint, uint32_t maxPacket, uint32_t flags) { + uint32_t handshake_flag = 0; + uint8_t * buf; + + if (endpoint > NUMBER_OF_PHYSICAL_ENDPOINTS - 1) { + return false; + } + + uint32_t log_endpoint = PHY_TO_LOG(endpoint); + + if ((flags & ISOCHRONOUS) == 0) { + handshake_flag = USB_ENDPT_EPHSHK_MASK; + if (IN_EP(endpoint)) { + if (endpoint_buffer[EP_BDT_IDX(log_endpoint, TX, ODD)] == NULL) + endpoint_buffer[EP_BDT_IDX(log_endpoint, TX, ODD)] = (uint8_t *) malloc (64*2); + buf = &endpoint_buffer[EP_BDT_IDX(log_endpoint, TX, ODD)][0]; + } else { + if (endpoint_buffer[EP_BDT_IDX(log_endpoint, RX, ODD)] == NULL) + endpoint_buffer[EP_BDT_IDX(log_endpoint, RX, ODD)] = (uint8_t *) malloc (64*2); + buf = &endpoint_buffer[EP_BDT_IDX(log_endpoint, RX, ODD)][0]; + } + } else { + if (IN_EP(endpoint)) { + if (endpoint_buffer_iso[2] == NULL) + endpoint_buffer_iso[2] = (uint8_t *) malloc (1023*2); + buf = &endpoint_buffer_iso[2][0]; + } else { + if (endpoint_buffer_iso[0] == NULL) + endpoint_buffer_iso[0] = (uint8_t *) malloc (1023*2); + buf = &endpoint_buffer_iso[0][0]; + } + } + + // IN endpt -> device to host (TX) + if (IN_EP(endpoint)) { + USB0->ENDPOINT[log_endpoint].ENDPT |= handshake_flag | // ep handshaking (not if iso endpoint) + USB_ENDPT_EPTXEN_MASK; // en TX (IN) tran + bdt[EP_BDT_IDX(log_endpoint, TX, ODD )].address = (uint32_t) buf; + bdt[EP_BDT_IDX(log_endpoint, TX, EVEN)].address = 0; + } + // OUT endpt -> host to device (RX) + else { + USB0->ENDPOINT[log_endpoint].ENDPT |= handshake_flag | // ep handshaking (not if iso endpoint) + USB_ENDPT_EPRXEN_MASK; // en RX (OUT) tran. + bdt[EP_BDT_IDX(log_endpoint, RX, ODD )].byte_count = maxPacket; + bdt[EP_BDT_IDX(log_endpoint, RX, ODD )].address = (uint32_t) buf; + bdt[EP_BDT_IDX(log_endpoint, RX, ODD )].info = BD_OWN_MASK | BD_DTS_MASK; + bdt[EP_BDT_IDX(log_endpoint, RX, EVEN)].info = 0; + } + + Data1 |= (1 << endpoint); + + return true; +} + +// read setup packet +void USBHAL::EP0setup(uint8_t *buffer) { + uint32_t sz; + endpointReadResult(EP0OUT, buffer, &sz); +} + +void USBHAL::EP0readStage(void) { + Data1 &= ~1UL; // set DATA0 + bdt[0].info = (BD_DTS_MASK | BD_OWN_MASK); +} + +void USBHAL::EP0read(void) { + uint32_t idx = EP_BDT_IDX(PHY_TO_LOG(EP0OUT), RX, 0); + bdt[idx].byte_count = MAX_PACKET_SIZE_EP0; +} + +uint32_t USBHAL::EP0getReadResult(uint8_t *buffer) { + uint32_t sz; + endpointReadResult(EP0OUT, buffer, &sz); + return sz; +} + +void USBHAL::EP0write(uint8_t *buffer, uint32_t size) { + endpointWrite(EP0IN, buffer, size); +} + +void USBHAL::EP0getWriteResult(void) { +} + +void USBHAL::EP0stall(void) { + stallEndpoint(EP0OUT); +} + +EP_STATUS USBHAL::endpointRead(uint8_t endpoint, uint32_t maximumSize) { + endpoint = PHY_TO_LOG(endpoint); + uint32_t idx = EP_BDT_IDX(endpoint, RX, 0); + bdt[idx].byte_count = maximumSize; + return EP_PENDING; +} + +EP_STATUS USBHAL::endpointReadResult(uint8_t endpoint, uint8_t * buffer, uint32_t *bytesRead) { + uint32_t n, sz, idx, setup = 0; + uint8_t not_iso; + uint8_t * ep_buf; + + uint32_t log_endpoint = PHY_TO_LOG(endpoint); + + if (endpoint > NUMBER_OF_PHYSICAL_ENDPOINTS - 1) { + return EP_INVALID; + } + + // if read on a IN endpoint -> error + if (IN_EP(endpoint)) { + return EP_INVALID; + } + + idx = EP_BDT_IDX(log_endpoint, RX, 0); + sz = bdt[idx].byte_count; + not_iso = USB0->ENDPOINT[log_endpoint].ENDPT & USB_ENDPT_EPHSHK_MASK; + + //for isochronous endpoint, we don't wait an interrupt + if ((log_endpoint != 0) && not_iso && !(epComplete & EP(endpoint))) { + return EP_PENDING; + } + + if ((log_endpoint == 0) && (TOK_PID(idx) == SETUP_TOKEN)) { + setup = 1; + } + + // non iso endpoint + if (not_iso) { + ep_buf = endpoint_buffer[idx]; + } else { + ep_buf = endpoint_buffer_iso[0]; + } + + for (n = 0; n < sz; n++) { + buffer[n] = ep_buf[n]; + } + + if (((Data1 >> endpoint) & 1) == ((bdt[idx].info >> 6) & 1)) { + if (setup && (buffer[6] == 0)) // if no setup data stage, + Data1 &= ~1UL; // set DATA0 + else + Data1 ^= (1 << endpoint); + } + + if (((Data1 >> endpoint) & 1)) { + bdt[idx].info = BD_DTS_MASK | BD_DATA01_MASK | BD_OWN_MASK; + } + else { + bdt[idx].info = BD_DTS_MASK | BD_OWN_MASK; + } + + USB0->CTL &= ~USB_CTL_TXSUSPENDTOKENBUSY_MASK; + *bytesRead = sz; + + epComplete &= ~EP(endpoint); + return EP_COMPLETED; +} + +EP_STATUS USBHAL::endpointWrite(uint8_t endpoint, uint8_t *data, uint32_t size) { + uint32_t idx, n; + uint8_t * ep_buf; + + if (endpoint > NUMBER_OF_PHYSICAL_ENDPOINTS - 1) { + return EP_INVALID; + } + + // if write on a OUT endpoint -> error + if (OUT_EP(endpoint)) { + return EP_INVALID; + } + + idx = EP_BDT_IDX(PHY_TO_LOG(endpoint), TX, 0); + bdt[idx].byte_count = size; + + + // non iso endpoint + if (USB0->ENDPOINT[PHY_TO_LOG(endpoint)].ENDPT & USB_ENDPT_EPHSHK_MASK) { + ep_buf = endpoint_buffer[idx]; + } else { + ep_buf = endpoint_buffer_iso[2]; + } + + for (n = 0; n < size; n++) { + ep_buf[n] = data[n]; + } + + if ((Data1 >> endpoint) & 1) { + bdt[idx].info = BD_OWN_MASK | BD_DTS_MASK; + } else { + bdt[idx].info = BD_OWN_MASK | BD_DTS_MASK | BD_DATA01_MASK; + } + + Data1 ^= (1 << endpoint); + + return EP_PENDING; +} + +EP_STATUS USBHAL::endpointWriteResult(uint8_t endpoint) { + if (epComplete & EP(endpoint)) { + epComplete &= ~EP(endpoint); + return EP_COMPLETED; + } + + return EP_PENDING; +} + +void USBHAL::stallEndpoint(uint8_t endpoint) { + USB0->ENDPOINT[PHY_TO_LOG(endpoint)].ENDPT |= USB_ENDPT_EPSTALL_MASK; +} + +void USBHAL::unstallEndpoint(uint8_t endpoint) { + USB0->ENDPOINT[PHY_TO_LOG(endpoint)].ENDPT &= ~USB_ENDPT_EPSTALL_MASK; +} + +bool USBHAL::getEndpointStallState(uint8_t endpoint) { + uint8_t stall = (USB0->ENDPOINT[PHY_TO_LOG(endpoint)].ENDPT & USB_ENDPT_EPSTALL_MASK); + return (stall) ? true : false; +} + +void USBHAL::remoteWakeup(void) { + // [TODO] +} + + +void USBHAL::_usbisr(void) { + instance->usbisr(); +} + + +void USBHAL::usbisr(void) { + uint8_t i; + uint8_t istat = USB0->ISTAT; + + // reset interrupt + if (istat & USB_ISTAT_USBRST_MASK) { + // disable all endpt + for(i = 0; i < 16; i++) { + USB0->ENDPOINT[i].ENDPT = 0x00; + } + + // enable control endpoint + realiseEndpoint(EP0OUT, MAX_PACKET_SIZE_EP0, 0); + realiseEndpoint(EP0IN, MAX_PACKET_SIZE_EP0, 0); + + Data1 = 0x55555555; + USB0->CTL |= USB_CTL_ODDRST_MASK; + + USB0->ISTAT = 0xFF; // clear all interrupt status flags + USB0->ERRSTAT = 0xFF; // clear all error flags + USB0->ERREN = 0xFF; // enable error interrupt sources + USB0->ADDR = 0x00; // set default address + + return; + } + + // resume interrupt + if (istat & USB_ISTAT_RESUME_MASK) { + USB0->ISTAT = USB_ISTAT_RESUME_MASK; + } + + // SOF interrupt + if (istat & USB_ISTAT_SOFTOK_MASK) { + USB0->ISTAT = USB_ISTAT_SOFTOK_MASK; + // SOF event, read frame number + SOF(frameNumber()); + } + + // stall interrupt + if (istat & 1<<7) { + if (USB0->ENDPOINT[0].ENDPT & USB_ENDPT_EPSTALL_MASK) + USB0->ENDPOINT[0].ENDPT &= ~USB_ENDPT_EPSTALL_MASK; + USB0->ISTAT |= USB_ISTAT_STALL_MASK; + } + + // token interrupt + if (istat & 1<<3) { + uint32_t num = (USB0->STAT >> 4) & 0x0F; + uint32_t dir = (USB0->STAT >> 3) & 0x01; + uint32_t ev_odd = (USB0->STAT >> 2) & 0x01; + + // setup packet + if ((num == 0) && (TOK_PID((EP_BDT_IDX(num, dir, ev_odd))) == SETUP_TOKEN)) { + Data1 &= ~0x02; + bdt[EP_BDT_IDX(0, TX, EVEN)].info &= ~BD_OWN_MASK; + bdt[EP_BDT_IDX(0, TX, ODD)].info &= ~BD_OWN_MASK; + + // EP0 SETUP event (SETUP data received) + EP0setupCallback(); + + } else { + // OUT packet + if (TOK_PID((EP_BDT_IDX(num, dir, ev_odd))) == OUT_TOKEN) { + if (num == 0) + EP0out(); + else { + epComplete |= (1 << EP(num)); + if ((instance->*(epCallback[EP(num) - 2]))()) { + epComplete &= ~(1 << EP(num)); + } + } + } + + // IN packet + if (TOK_PID((EP_BDT_IDX(num, dir, ev_odd))) == IN_TOKEN) { + if (num == 0) { + EP0in(); + if (set_addr == 1) { + USB0->ADDR = addr & 0x7F; + set_addr = 0; + } + } + else { + epComplete |= (1 << (EP(num) + 1)); + if ((instance->*(epCallback[EP(num) + 1 - 2]))()) { + epComplete &= ~(1 << (EP(num) + 1)); + } + } + } + } + + USB0->ISTAT = USB_ISTAT_TOKDNE_MASK; + } + + // sleep interrupt + if (istat & 1<<4) { + USB0->ISTAT |= USB_ISTAT_SLEEP_MASK; + } + + // error interrupt + if (istat & USB_ISTAT_ERROR_MASK) { + USB0->ERRSTAT = 0xFF; + USB0->ISTAT |= USB_ISTAT_ERROR_MASK; + } +} + + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBHID/USBHID.cpp Sun Dec 13 10:04:36 2015 +0000 @@ -0,0 +1,244 @@ + +#include "stdint.h" +#include "USBHAL.h" +#include "USBHID.h" + + +USBHID::USBHID(uint8_t output_report_length, uint8_t input_report_length, uint16_t vendor_id, uint16_t product_id, uint16_t product_release, bool connect): USBDevice(vendor_id, product_id, product_release) +{ + output_length = output_report_length; + input_length = input_report_length; + if(connect) { + USBDevice::connect(); + } +} + + +bool USBHID::send(HID_REPORT *report) +{ + return write(EPINT_IN, report->data, report->length, MAX_HID_REPORT_SIZE); +} + +bool USBHID::sendNB(HID_REPORT *report) +{ + return writeNB(EPINT_IN, report->data, report->length, MAX_HID_REPORT_SIZE); +} + + +bool USBHID::read(HID_REPORT *report) +{ + uint32_t bytesRead = 0; + bool result; + result = USBDevice::readEP(EPINT_OUT, report->data, &bytesRead, MAX_HID_REPORT_SIZE); + if(!readStart(EPINT_OUT, MAX_HID_REPORT_SIZE)) + return false; + report->length = bytesRead; + return result; +} + + +bool USBHID::readNB(HID_REPORT *report) +{ + uint32_t bytesRead = 0; + bool result; + result = USBDevice::readEP_NB(EPINT_OUT, report->data, &bytesRead, MAX_HID_REPORT_SIZE); + // if readEP_NB did not succeed, does not issue a readStart + if (!result) + return false; + report->length = bytesRead; + if(!readStart(EPINT_OUT, MAX_HID_REPORT_SIZE)) + return false; + return result; +} + + +uint16_t USBHID::reportDescLength() { + reportDesc(); + return reportLength; +} + + +bool USBHID::USBCallback_request() { + bool success = false; + CONTROL_TRANSFER * transfer = getTransferPtr(); + uint8_t *hidDescriptor; + + // Process additional standard requests + + if ((transfer->setup.bmRequestType.Type == STANDARD_TYPE)) + { + switch (transfer->setup.bRequest) + { + case GET_DESCRIPTOR: + switch (DESCRIPTOR_TYPE(transfer->setup.wValue)) + { + case REPORT_DESCRIPTOR: + if ((reportDesc() != NULL) \ + && (reportDescLength() != 0)) + { + transfer->remaining = reportDescLength(); + transfer->ptr = reportDesc(); + transfer->direction = DEVICE_TO_HOST; + success = true; + } + break; + case HID_DESCRIPTOR: + // Find the HID descriptor, after the configuration descriptor + hidDescriptor = findDescriptor(HID_DESCRIPTOR); + if (hidDescriptor != NULL) + { + transfer->remaining = HID_DESCRIPTOR_LENGTH; + transfer->ptr = hidDescriptor; + transfer->direction = DEVICE_TO_HOST; + success = true; + } + break; + + default: + break; + } + break; + default: + break; + } + } + + // Process class-specific requests + + if (transfer->setup.bmRequestType.Type == CLASS_TYPE) + { + switch (transfer->setup.bRequest) + { + case SET_REPORT: + // First byte will be used for report ID + outputReport.data[0] = transfer->setup.wValue & 0xff; + outputReport.length = transfer->setup.wLength + 1; + + transfer->remaining = sizeof(outputReport.data) - 1; + transfer->ptr = &outputReport.data[1]; + transfer->direction = HOST_TO_DEVICE; + transfer->notify = true; + success = true; + default: + break; + } + } + + return success; +} + + +#define DEFAULT_CONFIGURATION (1) + +bool USBHID::USBCallback_setConfiguration(uint8_t configuration) { + if (configuration != DEFAULT_CONFIGURATION) { + return false; + } + + // Configure endpoints > 0 + addEndpoint(EPINT_IN, MAX_PACKET_SIZE_EPINT); + addEndpoint(EPINT_OUT, MAX_PACKET_SIZE_EPINT); + + // We activate the endpoint to be able to recceive data + readStart(EPINT_OUT, MAX_PACKET_SIZE_EPINT); + return true; +} + + +uint8_t * USBHID::stringIinterfaceDesc() { + static uint8_t stringIinterfaceDescriptor[] = { + 0x08, //bLength + STRING_DESCRIPTOR, //bDescriptorType 0x03 + 'H',0,'I',0,'D',0, //bString iInterface - HID + }; + return stringIinterfaceDescriptor; +} + +uint8_t * USBHID::stringIproductDesc() { + static uint8_t stringIproductDescriptor[] = { + 0x16, //bLength + STRING_DESCRIPTOR, //bDescriptorType 0x03 + 'H',0,'I',0,'D',0,' ',0,'D',0,'E',0,'V',0,'I',0,'C',0,'E',0 //bString iProduct - HID device + }; + return stringIproductDescriptor; +} + + + +uint8_t * USBHID::reportDesc() { + static uint8_t reportDescriptor[] = { + 0x06, LSB(0xFFAB), MSB(0xFFAB), + 0x0A, LSB(0x0200), MSB(0x0200), + 0xA1, 0x01, // Collection 0x01 + 0x75, 0x08, // report size = 8 bits + 0x15, 0x00, // logical minimum = 0 + 0x26, 0xFF, 0x00, // logical maximum = 255 + 0x95, input_length, // report count + 0x09, 0x01, // usage + 0x81, 0x02, // Input (array) + 0x95, output_length,// report count + 0x09, 0x02, // usage + 0x91, 0x02, // Output (array) + 0xC0 // end collection + + }; + reportLength = sizeof(reportDescriptor); + return reportDescriptor; +} + +#define DEFAULT_CONFIGURATION (1) +#define TOTAL_DESCRIPTOR_LENGTH ((1 * CONFIGURATION_DESCRIPTOR_LENGTH) \ + + (1 * INTERFACE_DESCRIPTOR_LENGTH) \ + + (1 * HID_DESCRIPTOR_LENGTH) \ + + (2 * ENDPOINT_DESCRIPTOR_LENGTH)) + +uint8_t * USBHID::configurationDesc() { + static uint8_t configurationDescriptor[] = { + CONFIGURATION_DESCRIPTOR_LENGTH,// bLength + CONFIGURATION_DESCRIPTOR, // bDescriptorType + LSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (LSB) + MSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (MSB) + 0x01, // bNumInterfaces + DEFAULT_CONFIGURATION, // bConfigurationValue + 0x00, // iConfiguration + C_RESERVED | C_SELF_POWERED, // bmAttributes + C_POWER(0), // bMaxPower + + INTERFACE_DESCRIPTOR_LENGTH, // bLength + INTERFACE_DESCRIPTOR, // bDescriptorType + 0x00, // bInterfaceNumber + 0x00, // bAlternateSetting + 0x02, // bNumEndpoints + HID_CLASS, // bInterfaceClass + HID_SUBCLASS_NONE, // bInterfaceSubClass + HID_PROTOCOL_NONE, // bInterfaceProtocol + 0x00, // iInterface + + HID_DESCRIPTOR_LENGTH, // bLength + HID_DESCRIPTOR, // bDescriptorType + LSB(HID_VERSION_1_11), // bcdHID (LSB) + MSB(HID_VERSION_1_11), // bcdHID (MSB) + 0x00, // bCountryCode + 0x01, // bNumDescriptors + REPORT_DESCRIPTOR, // bDescriptorType + (uint8_t)(LSB(this->reportDescLength())), // wDescriptorLength (LSB) + (uint8_t)(MSB(this->reportDescLength())), // wDescriptorLength (MSB) + + ENDPOINT_DESCRIPTOR_LENGTH, // bLength + ENDPOINT_DESCRIPTOR, // bDescriptorType + PHY_TO_DESC(EPINT_IN), // bEndpointAddress + E_INTERRUPT, // bmAttributes + LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB) + MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB) + 1, // bInterval (milliseconds) + + ENDPOINT_DESCRIPTOR_LENGTH, // bLength + ENDPOINT_DESCRIPTOR, // bDescriptorType + PHY_TO_DESC(EPINT_OUT), // bEndpointAddress + E_INTERRUPT, // bmAttributes + LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB) + MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB) + 1, // bInterval (milliseconds) + }; + return configurationDescriptor; +}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBHID/USBHID.h Sun Dec 13 10:04:36 2015 +0000 @@ -0,0 +1,39 @@ + + +#ifndef USB_HID_H +#define USB_HID_H +#include "USBEndpoints.h" +#include "USBDescriptor.h" +#include "USBDevice_Types.h" + +#include "USBHID_Types.h" +#include "USBDevice.h" + +class USBHID: public USBDevice { +public: + + USBHID(uint8_t output_report_length = 64, uint8_t input_report_length = 64, uint16_t vendor_id = 0x1234, uint16_t product_id = 0x0006, uint16_t product_release = 0x0001, bool connect = true); + + bool send(HID_REPORT *report); + bool sendNB(HID_REPORT *report); + bool read(HID_REPORT * report); + bool readNB(HID_REPORT * report); + +protected: + uint16_t reportLength; + virtual uint8_t * reportDesc(); + virtual uint16_t reportDescLength(); + virtual uint8_t * stringIproductDesc(); + virtual uint8_t * stringIinterfaceDesc(); + virtual uint8_t * configurationDesc(); + virtual void HID_callbackSetReport(HID_REPORT *report){}; + virtual bool USBCallback_request(); + virtual bool USBCallback_setConfiguration(uint8_t configuration); + +private: + HID_REPORT outputReport; + uint8_t output_length; + uint8_t input_length; +}; + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBHID/USBHID_Types.h Sun Dec 13 10:04:36 2015 +0000 @@ -0,0 +1,75 @@ + + +#ifndef USBCLASS_HID_TYPES +#define USBCLASS_HID_TYPES + +#include <stdint.h> + +/* */ +#define HID_VERSION_1_11 (0x0111) + +/* HID Class */ +#define HID_CLASS (3) +#define HID_SUBCLASS_NONE (0) +#define HID_PROTOCOL_NONE (0) + +/* Descriptors */ +#define HID_DESCRIPTOR (33) +#define HID_DESCRIPTOR_LENGTH (0x09) +#define REPORT_DESCRIPTOR (34) + +/* Class requests */ +#define GET_REPORT (0x1) +#define GET_IDLE (0x2) +#define SET_REPORT (0x9) +#define SET_IDLE (0xa) + +/* HID Class Report Descriptor */ +/* Short items: size is 0, 1, 2 or 3 specifying 0, 1, 2 or 4 (four) bytes */ +/* of data as per HID Class standard */ + +/* Main items */ +#define INPUT(size) (0x80 | size) +#define OUTPUT(size) (0x90 | size) +#define FEATURE(size) (0xb0 | size) +#define COLLECTION(size) (0xa0 | size) +#define END_COLLECTION(size) (0xc0 | size) + +/* Global items */ +#define USAGE_PAGE(size) (0x04 | size) +#define LOGICAL_MINIMUM(size) (0x14 | size) +#define LOGICAL_MAXIMUM(size) (0x24 | size) +#define PHYSICAL_MINIMUM(size) (0x34 | size) +#define PHYSICAL_MAXIMUM(size) (0x44 | size) +#define UNIT_EXPONENT(size) (0x54 | size) +#define UNIT(size) (0x64 | size) +#define REPORT_SIZE(size) (0x74 | size) +#define REPORT_ID(size) (0x84 | size) +#define REPORT_COUNT(size) (0x94 | size) +#define PUSH(size) (0xa4 | size) +#define POP(size) (0xb4 | size) + +/* Local items */ +#define USAGE(size) (0x08 | size) +#define USAGE_MINIMUM(size) (0x18 | size) +#define USAGE_MAXIMUM(size) (0x28 | size) +#define DESIGNATOR_INDEX(size) (0x38 | size) +#define DESIGNATOR_MINIMUM(size) (0x48 | size) +#define DESIGNATOR_MAXIMUM(size) (0x58 | size) +#define STRING_INDEX(size) (0x78 | size) +#define STRING_MINIMUM(size) (0x88 | size) +#define STRING_MAXIMUM(size) (0x98 | size) +#define DELIMITER(size) (0xa8 | size) + +/* HID Report */ +/* Where report IDs are used the first byte of 'data' will be the */ +/* report ID and 'length' will include this report ID byte. */ + +#define MAX_HID_REPORT_SIZE (64) + +typedef struct { + uint32_t length; + uint8_t data[MAX_HID_REPORT_SIZE]; +} HID_REPORT; + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBHID/USBMouse.cpp Sun Dec 13 10:04:36 2015 +0000 @@ -0,0 +1,177 @@ + + +#include "stdint.h" +#include "USBMouse.h" + +bool USBMouse::update(int16_t x, int16_t y, uint8_t button, int8_t z) { + switch (mouse_type) { + case REL_MOUSE: + while (x > 127) { + if (!mouseSend(127, 0, button, z)) return false; + x = x - 127; + } + while (x < -128) { + if (!mouseSend(-128, 0, button, z)) return false; + x = x + 128; + } + while (y > 127) { + if (!mouseSend(0, 127, button, z)) return false; + y = y - 127; + } + while (y < -128) { + if (!mouseSend(0, -128, button, z)) return false; + y = y + 128; + } + return mouseSend(x, y, button, z); + + default: + return false; + } +} + +bool USBMouse::mouseSend(int8_t x, int8_t y, uint8_t buttons, int8_t z) { + HID_REPORT report; + report.data[0] = buttons & 0x07; + report.data[1] = x; + report.data[2] = y; + report.data[3] = -z; // >0 to scroll down, <0 to scroll up + + report.length = 4; + + return send(&report); +} + +bool USBMouse::move(int16_t x, int16_t y) { + return update(x, y, button, 0); +} + +bool USBMouse::scroll(int8_t z) { + return update(0, 0, button, z); +} + + +bool USBMouse::doubleClick() { + if (!click(MOUSE_LEFT)) + return false; + wait(0.1); + return click(MOUSE_LEFT); +} + +bool USBMouse::click(uint8_t button) { + if (!update(0, 0, button, 0)) + return false; + wait(0.01); + return update(0, 0, 0, 0); +} + +bool USBMouse::press(uint8_t button_) { + button = button_ & 0x07; + return update(0, 0, button, 0); +} + +bool USBMouse::release(uint8_t button_) { + button = (button & (~button_)) & 0x07; + return update(0, 0, button, 0); +} + + +uint8_t * USBMouse::reportDesc() { + + if (mouse_type == REL_MOUSE) { + static uint8_t reportDescriptor[] = { + USAGE_PAGE(1), 0x01, // Genric Desktop + USAGE(1), 0x02, // Mouse + COLLECTION(1), 0x01, // Application + USAGE(1), 0x01, // Pointer + COLLECTION(1), 0x00, // Physical + + REPORT_COUNT(1), 0x03, + REPORT_SIZE(1), 0x01, + USAGE_PAGE(1), 0x09, // Buttons + USAGE_MINIMUM(1), 0x1, + USAGE_MAXIMUM(1), 0x3, + LOGICAL_MINIMUM(1), 0x00, + LOGICAL_MAXIMUM(1), 0x01, + INPUT(1), 0x02, + REPORT_COUNT(1), 0x01, + REPORT_SIZE(1), 0x05, + INPUT(1), 0x01, + + REPORT_COUNT(1), 0x03, + REPORT_SIZE(1), 0x08, + USAGE_PAGE(1), 0x01, + USAGE(1), 0x30, // X + USAGE(1), 0x31, // Y + USAGE(1), 0x38, // scroll + LOGICAL_MINIMUM(1), 0x81, + LOGICAL_MAXIMUM(1), 0x7f, + INPUT(1), 0x06, // Relative data + + END_COLLECTION(0), + END_COLLECTION(0), + }; + reportLength = sizeof(reportDescriptor); + return reportDescriptor; + } + // reportLength = sizeof(reportDescriptor); + //return reportDescriptor; + + return NULL; +} + +#define DEFAULT_CONFIGURATION (1) +#define TOTAL_DESCRIPTOR_LENGTH ((1 * CONFIGURATION_DESCRIPTOR_LENGTH) \ + + (1 * INTERFACE_DESCRIPTOR_LENGTH) \ + + (1 * HID_DESCRIPTOR_LENGTH) \ + + (2 * ENDPOINT_DESCRIPTOR_LENGTH)) + +uint8_t * USBMouse::configurationDesc() { + static uint8_t configurationDescriptor[] = { + CONFIGURATION_DESCRIPTOR_LENGTH,// bLength + CONFIGURATION_DESCRIPTOR, // bDescriptorType + LSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (LSB) + MSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (MSB) + 0x01, // bNumInterfaces + DEFAULT_CONFIGURATION, // bConfigurationValue + 0x00, // iConfiguration + C_RESERVED | C_SELF_POWERED, // bmAttributes + C_POWER(0), // bMaxPowerHello World from Mbed + + INTERFACE_DESCRIPTOR_LENGTH, // bLength + INTERFACE_DESCRIPTOR, // bDescriptorType + 0x00, // bInterfaceNumber + 0x00, // bAlternateSetting + 0x02, // bNumEndpoints + HID_CLASS, // bInterfaceClass + 1, // bInterfaceSubClass + 2, // bInterfaceProtocol (mouse) + 0x00, // iInterface + + HID_DESCRIPTOR_LENGTH, // bLength + HID_DESCRIPTOR, // bDescriptorType + LSB(HID_VERSION_1_11), // bcdHID (LSB) + MSB(HID_VERSION_1_11), // bcdHID (MSB) + 0x00, // bCountryCode + 0x01, // bNumDescriptors + REPORT_DESCRIPTOR, // bDescriptorType + (uint8_t)(LSB(reportDescLength())), // wDescriptorLength (LSB) + (uint8_t)(MSB(reportDescLength())), // wDescriptorLength (MSB) + + ENDPOINT_DESCRIPTOR_LENGTH, // bLength + ENDPOINT_DESCRIPTOR, // bDescriptorType + PHY_TO_DESC(EPINT_IN), // bEndpointAddress + E_INTERRUPT, // bmAttributes + LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB) + MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB) + 1, // bInterval (milliseconds) + + ENDPOINT_DESCRIPTOR_LENGTH, // bLength + ENDPOINT_DESCRIPTOR, // bDescriptorType + PHY_TO_DESC(EPINT_OUT), // bEndpointAddress + E_INTERRUPT, // bmAttributes + LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB) + MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB) + 1, // bInterval (milliseconds) + }; + return configurationDescriptor; +}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBHID/USBMouse.h Sun Dec 13 10:04:36 2015 +0000 @@ -0,0 +1,51 @@ +#ifndef USBMOUSE_H +#define USBMOUSE_H +#include "USBHID.h" +#define REPORT_ID_MOUSE 2 + +#define X_MIN_REL (-127) /*!< The maximum value that we can move to the left on the x-axis */ +#define Y_MIN_REL (-127) /*!< The maximum value that we can move up on the y-axis */ +#define X_MAX_REL (127) /*!< The maximum value that we can move to the right on the x-axis */ +#define Y_MAX_REL (127) /*!< The maximum value that we can move down on the y-axis */ + +enum MOUSE_BUTTON +{ + MOUSE_LEFT = 1, + MOUSE_RIGHT = 2, + MOUSE_MIDDLE = 4, +}; +enum MOUSE_TYPE +{ + REL_MOUSE, + ABS_MOUSE +}; + +class USBMouse: public USBHID +{ + public: + USBMouse(MOUSE_TYPE mouse_type = REL_MOUSE, uint16_t vendor_id = 0x1234, uint16_t product_id = 0x0001, uint16_t product_release = 0x0001): + USBHID(0, 0, vendor_id, product_id, product_release, false) + { + button = 0; + this->mouse_type = mouse_type; + connect(); + }; + bool update(int16_t x, int16_t y, uint8_t buttons, int8_t z); + bool move(int16_t x, int16_t y); + bool press(uint8_t button); + bool release(uint8_t button); + bool doubleClick(); + bool click(uint8_t button); + bool scroll(int8_t z); + virtual uint8_t * reportDesc(); + + protected: + virtual uint8_t * configurationDesc(); + + private: + MOUSE_TYPE mouse_type; + uint8_t button; + bool mouseSend(int8_t x, int8_t y, uint8_t buttons, int8_t z); +}; + +#endif