Prasanth B J / Mbed 2 deprecated ACS_Flowchart_BAE

I2C BAE standalone hardware testing

Dependencies:   FreescaleIAP mbed-rtos mbed

Fork of ACS_Flowchart_BAE_1 by Team Fox

BCN.cpp@11:1fdb94ae6563, 2016-04-13 (annotated)

Committer:
lakshya
Date:
Wed Apr 13 17:00:25 2016 +0000
Revision:
11:1fdb94ae6563
Parent:
0:7b4c00e3912f
Child:
12:af1d7e18b868
fixing.. almost_pointer problem identified, telemetry

Who changed what in which revision?

UserRevisionLine numberNew contents of line
sakthipriya 0:7b4c00e3912f 1 #include "BCN.h"
sakthipriya 0:7b4c00e3912f 2 #include <stdio.h>
sakthipriya 0:7b4c00e3912f 3 #include "pin_config.h"
sakthipriya 0:7b4c00e3912f 4
sakthipriya 0:7b4c00e3912f 5 Serial pc_bcn(USBTX, USBRX); //tx,rx
sakthipriya 0:7b4c00e3912f 6 SPI spi(PIN16, PIN17, PIN15); // mosi, miso, sclk
sakthipriya 0:7b4c00e3912f 7 DigitalOut cs(PIN6); //slave select or chip select
sakthipriya 0:7b4c00e3912f 8 Timer t;
sakthipriya 0:7b4c00e3912f 9 Timer t_i;
sakthipriya 0:7b4c00e3912f 10 Ticker loop;
sakthipriya 0:7b4c00e3912f 11
sakthipriya 0:7b4c00e3912f 12
sakthipriya 0:7b4c00e3912f 13 //GLOBAL VARIABLES
sakthipriya 0:7b4c00e3912f 14 uint8_t BCN_INIT_STATUS;
sakthipriya 0:7b4c00e3912f 15 uint8_t BCN_TX_MAIN_STATUS;
sakthipriya 0:7b4c00e3912f 16 uint8_t BCN_TX_STATUS;
sakthipriya 0:7b4c00e3912f 17 uint8_t BCN_TX_EN = 1; //hardcoding for now //check where is this variable toggled??
sakthipriya 0:7b4c00e3912f 18 uint8_t BCN_FEN = 1; //write this to non-erasable memory.
sakthipriya 0:7b4c00e3912f 19 uint8_t BCN_STANDBY = 0; //hardcoding for now //check where is this variable toggled??
sakthipriya 0:7b4c00e3912f 20 uint8_t BCN_TS_BUFFER; // For Temperature
sakthipriya 0:7b4c00e3912f 21
lakshya 11:1fdb94ae6563 22 uint8_t BCN_FAIL_COUNT=0; //bcn fail count added
sakthipriya 0:7b4c00e3912f 23
sakthipriya 0:7b4c00e3912f 24 void P_BCN_INIT()
sakthipriya 0:7b4c00e3912f 25 {
sakthipriya 0:7b4c00e3912f 26 pc_bcn.printf("P_BCN_INIT\n");
sakthipriya 0:7b4c00e3912f 27 BCN_INIT_STATUS = 1;
sakthipriya 0:7b4c00e3912f 28 Init_BEACON_HW();
sakthipriya 0:7b4c00e3912f 29 if (BCN_FEN == 0)
sakthipriya 0:7b4c00e3912f 30 t.start();//Start the timer for RF_Silence
sakthipriya 0:7b4c00e3912f 31 BCN_INIT_STATUS = 0;
sakthipriya 0:7b4c00e3912f 32 }
sakthipriya 0:7b4c00e3912f 33 void P_BCN_FEN()
sakthipriya 0:7b4c00e3912f 34 {
sakthipriya 0:7b4c00e3912f 35 pc_bcn.printf("P_FEN\n");
sakthipriya 0:7b4c00e3912f 36 BCN_FEN = 1;//write this value to flash
sakthipriya 0:7b4c00e3912f 37 }
sakthipriya 0:7b4c00e3912f 38 void P_BCN_TX_MAIN()
sakthipriya 0:7b4c00e3912f 39 {
sakthipriya 0:7b4c00e3912f 40 pc_bcn.printf("P_BCN_TX_MAIN\n");
sakthipriya 0:7b4c00e3912f 41 BCN_TX_MAIN_STATUS = 1;
sakthipriya 0:7b4c00e3912f 42
sakthipriya 0:7b4c00e3912f 43 if(BCN_FEN == 1)
sakthipriya 0:7b4c00e3912f 44 {
sakthipriya 0:7b4c00e3912f 45 if(BCN_TX_EN == 1)
sakthipriya 0:7b4c00e3912f 46 {
sakthipriya 0:7b4c00e3912f 47 //Measure and store BCN temperature in BCN_TS_BUFFER
sakthipriya 0:7b4c00e3912f 48 BCN_TS_BUFFER = check_Temperature();
sakthipriya 0:7b4c00e3912f 49 pc_bcn.printf("\n\ntemperature = %d\n\n",BCN_TS_BUFFER);
sakthipriya 0:7b4c00e3912f 50 //Get BCN_HK data from BCN HW(SPI) //Store BCN_HK data in BCN_HK_BUFFER
sakthipriya 0:7b4c00e3912f 51 if(BCN_STANDBY == 1 )
sakthipriya 0:7b4c00e3912f 52 {
sakthipriya 0:7b4c00e3912f 53 Set_BCN_TX_STATUS(BCN_TX_STANDBY);
sakthipriya 0:7b4c00e3912f 54 BCN_TX_MAIN_STATUS = 0;
sakthipriya 0:7b4c00e3912f 55
sakthipriya 0:7b4c00e3912f 56 // break;
sakthipriya 0:7b4c00e3912f 57 }
sakthipriya 0:7b4c00e3912f 58 else
sakthipriya 0:7b4c00e3912f 59 {
sakthipriya 0:7b4c00e3912f 60 //transmit short beacon and long beacon
sakthipriya 0:7b4c00e3912f 61 t_i.start();
sakthipriya 0:7b4c00e3912f 62 int begin = t_i.read_us();
sakthipriya 0:7b4c00e3912f 63 SHORT_BCN_TX();
sakthipriya 0:7b4c00e3912f 64 LONG_BCN_TX();
sakthipriya 0:7b4c00e3912f 65 t_i.stop();
sakthipriya 0:7b4c00e3912f 66 int end = t_i.read_us();
sakthipriya 0:7b4c00e3912f 67 pc_bcn.printf("The time required for short and long is %d seconds\r\n", end-begin);
sakthipriya 0:7b4c00e3912f 68
sakthipriya 0:7b4c00e3912f 69 if(Check_ACK_RECEIVED() == 1)
sakthipriya 0:7b4c00e3912f 70 {
sakthipriya 0:7b4c00e3912f 71 Set_BCN_TX_STATUS(BCN_TX_SUCCESS);
sakthipriya 0:7b4c00e3912f 72 BCN_TX_MAIN_STATUS = 0;
sakthipriya 0:7b4c00e3912f 73 }
sakthipriya 0:7b4c00e3912f 74 else
sakthipriya 0:7b4c00e3912f 75 {
sakthipriya 0:7b4c00e3912f 76 Set_BCN_TX_STATUS(BCN_TX_FAILURE);
sakthipriya 0:7b4c00e3912f 77 BCN_TX_MAIN_STATUS = 0;
lakshya 11:1fdb94ae6563 78 BCN_FAIL_COUNT+=1;
sakthipriya 0:7b4c00e3912f 79
sakthipriya 0:7b4c00e3912f 80 }
sakthipriya 0:7b4c00e3912f 81 }
sakthipriya 0:7b4c00e3912f 82 }
sakthipriya 0:7b4c00e3912f 83 else
sakthipriya 0:7b4c00e3912f 84 {
sakthipriya 0:7b4c00e3912f 85 Set_BCN_TX_STATUS(BCN_TX_DISABLED);
sakthipriya 0:7b4c00e3912f 86 BCN_TX_MAIN_STATUS = 0;
sakthipriya 0:7b4c00e3912f 87 }
sakthipriya 0:7b4c00e3912f 88 }
sakthipriya 0:7b4c00e3912f 89 else
sakthipriya 0:7b4c00e3912f 90 {
sakthipriya 0:7b4c00e3912f 91 Set_BCN_TX_STATUS(BCN_RF_SILENCE); //Window of RF Silence: None of the Txs should be on.
sakthipriya 0:7b4c00e3912f 92 BCN_TX_MAIN_STATUS = 0;
sakthipriya 0:7b4c00e3912f 93 }
sakthipriya 0:7b4c00e3912f 94 }
sakthipriya 0:7b4c00e3912f 95
sakthipriya 0:7b4c00e3912f 96 void Set_BCN_TX_STATUS(uint8_t STATUS)
sakthipriya 0:7b4c00e3912f 97 {
sakthipriya 0:7b4c00e3912f 98 BCN_TX_STATUS = STATUS;
sakthipriya 0:7b4c00e3912f 99 }
sakthipriya 0:7b4c00e3912f 100
sakthipriya 0:7b4c00e3912f 101 uint8_t check_Temperature()
sakthipriya 0:7b4c00e3912f 102 {
sakthipriya 0:7b4c00e3912f 103 uint8_t temperature;
sakthipriya 0:7b4c00e3912f 104 writereg(RF22_REG_0F_ADC_CONFIGURATION,0x80);
sakthipriya 0:7b4c00e3912f 105 writereg(RF22_REG_12_Temperature_Sensor_Calibration,0x20);
sakthipriya 0:7b4c00e3912f 106 wait(1);
sakthipriya 0:7b4c00e3912f 107 temperature = readreg(RF22_REG_11_ADC_Value);
sakthipriya 0:7b4c00e3912f 108 temperature = (float)temperature*0.5 - 64;
sakthipriya 0:7b4c00e3912f 109 return temperature;
sakthipriya 0:7b4c00e3912f 110 }
sakthipriya 0:7b4c00e3912f 111
sakthipriya 0:7b4c00e3912f 112 void SHORT_BCN_TX()
sakthipriya 0:7b4c00e3912f 113 {
sakthipriya 0:7b4c00e3912f 114 writereg(RF22_REG_6E_TX_DATA_RATE,0x01);
sakthipriya 0:7b4c00e3912f 115 writereg(RF22_REG_6F_TX_DATA_RATE,0x4F);//160bps
sakthipriya 0:7b4c00e3912f 116 writereg(RF22_REG_3E_PACKET_LENGTH,SHORT_TX_DATA); //short packet length
sakthipriya 0:7b4c00e3912f 117 /*
sakthipriya 0:7b4c00e3912f 118 init();
sakthipriya 0:7b4c00e3912f 119 //init complete
sakthipriya 0:7b4c00e3912f 120 pc_bcn.printf("init complete.....press t to send\n");
sakthipriya 0:7b4c00e3912f 121 while(pc_bcn.getc()=='t')
sakthipriya 0:7b4c00e3912f 122 { */
sakthipriya 0:7b4c00e3912f 123 //button.rise(&interrupt_func); //interrupt enabled ( rising edge of pin 9)
sakthipriya 0:7b4c00e3912f 124 wait(0.02); // pl. update this value or even avoid it!!!
sakthipriya 0:7b4c00e3912f 125 int i=0;
sakthipriya 0:7b4c00e3912f 126 //extract values from short_beacon[]
sakthipriya 0:7b4c00e3912f 127 struct Short_beacon
sakthipriya 0:7b4c00e3912f 128 {
sakthipriya 0:7b4c00e3912f 129 uint8_t Voltage[1];
sakthipriya 0:7b4c00e3912f 130 uint8_t AngularSpeed[2];
sakthipriya 0:7b4c00e3912f 131 uint8_t SubsystemStatus[1];
sakthipriya 0:7b4c00e3912f 132 uint8_t Temp[3];
sakthipriya 0:7b4c00e3912f 133 uint8_t ErrorFlag[1];
sakthipriya 0:7b4c00e3912f 134 }Shortbeacon = { {0x88}, {0x99, 0xAA} , {0xAA},{0xAA,0xDD,0xEE}, {0x00} };
sakthipriya 0:7b4c00e3912f 135
sakthipriya 0:7b4c00e3912f 136 //filling hk data
sakthipriya 0:7b4c00e3912f 137 //uint8_t short_beacon[] = { 0xAB, 0x8A, 0xE2, 0xBB, 0xB8, 0xA2, 0x8E,Shortbeacon.Voltage[0],Shortbeacon.AngularSpeed[0], Shortbeacon.AngularSpeed[1],Shortbeacon.SubsystemStatus[0],Shortbeacon.Temp[0],Shortbeacon.Temp[1],Shortbeacon.Temp[2],Shortbeacon.ErrorFlag[0]};
sakthipriya 0:7b4c00e3912f 138 uint8_t short_beacon[] = { 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,Shortbeacon.Voltage[0],Shortbeacon.AngularSpeed[0], Shortbeacon.AngularSpeed[1],Shortbeacon.SubsystemStatus[0],Shortbeacon.Temp[0],Shortbeacon.Temp[1],Shortbeacon.Temp[2],Shortbeacon.ErrorFlag[0]};
sakthipriya 0:7b4c00e3912f 139
sakthipriya 0:7b4c00e3912f 140 //uint8_t short_beacon[15];
sakthipriya 0:7b4c00e3912f 141 // for(int i = 0;i<15;i++)
sakthipriya 0:7b4c00e3912f 142 // {
sakthipriya 0:7b4c00e3912f 143 // short_beacon[i] = 0xAA;
sakthipriya 0:7b4c00e3912f 144 // }
sakthipriya 0:7b4c00e3912f 145
sakthipriya 0:7b4c00e3912f 146 //writereg(RF22_REG_07_OPERATING_MODE1,0x01); //ready mode ??
sakthipriya 0:7b4c00e3912f 147 clearTxBuf();
sakthipriya 0:7b4c00e3912f 148 //writing data first time
sakthipriya 0:7b4c00e3912f 149 int byte = 0;
sakthipriya 0:7b4c00e3912f 150 cs = 0;
sakthipriya 0:7b4c00e3912f 151 spi.write(0xFF);
sakthipriya 0:7b4c00e3912f 152 pc_bcn.printf("line 151");
sakthipriya 0:7b4c00e3912f 153 for (int byte_counter = 0; byte_counter <15 ; byte_counter++)
sakthipriya 0:7b4c00e3912f 154 {
sakthipriya 0:7b4c00e3912f 155 for(int j = 3; j >= 0 ; j--)
sakthipriya 0:7b4c00e3912f 156 {
sakthipriya 0:7b4c00e3912f 157 if((short_beacon[byte_counter] & (uint8_t) pow(2.0,(j*2+1)))!= pow(2.0,(j*2+1)))
sakthipriya 0:7b4c00e3912f 158 {
sakthipriya 0:7b4c00e3912f 159 byte=0x00;
sakthipriya 0:7b4c00e3912f 160 }
sakthipriya 0:7b4c00e3912f 161 else
sakthipriya 0:7b4c00e3912f 162 {
sakthipriya 0:7b4c00e3912f 163 byte=0xF0;
sakthipriya 0:7b4c00e3912f 164 }
sakthipriya 0:7b4c00e3912f 165 if((short_beacon[byte_counter] & (uint8_t) pow(2.0,j*2))!= pow(2.0,j*2))
sakthipriya 0:7b4c00e3912f 166 {
sakthipriya 0:7b4c00e3912f 167 byte=byte | 0x00;
sakthipriya 0:7b4c00e3912f 168 }
sakthipriya 0:7b4c00e3912f 169 else
sakthipriya 0:7b4c00e3912f 170 {
sakthipriya 0:7b4c00e3912f 171 byte=byte | 0x0F;
sakthipriya 0:7b4c00e3912f 172 }
sakthipriya 0:7b4c00e3912f 173 spi.write(byte);
sakthipriya 0:7b4c00e3912f 174 }
sakthipriya 0:7b4c00e3912f 175 }
sakthipriya 0:7b4c00e3912f 176
sakthipriya 0:7b4c00e3912f 177 cs = 1;
sakthipriya 0:7b4c00e3912f 178 pc_bcn.printf("line 177\n");
sakthipriya 0:7b4c00e3912f 179 //Set to Tx mode
sakthipriya 0:7b4c00e3912f 180 writereg(RF22_REG_07_OPERATING_MODE1,0x09);
sakthipriya 0:7b4c00e3912f 181
sakthipriya 0:7b4c00e3912f 182 //Check for fifoThresh
sakthipriya 0:7b4c00e3912f 183 while((readreg(RF22_REG_03_INTERRUPT_STATUS1) & 0x20) != 0x20);
sakthipriya 0:7b4c00e3912f 184 //pc_bcn.printf("fifothresh1?\n");
sakthipriya 0:7b4c00e3912f 185 pc_bcn.printf("line 184\n");
sakthipriya 0:7b4c00e3912f 186 //rf22.waitPacketSent();
sakthipriya 0:7b4c00e3912f 187 while((readreg(RF22_REG_03_INTERRUPT_STATUS1) & 0x04) != 0x04);
sakthipriya 0:7b4c00e3912f 188 //pc_bcn.printf(" chk pkt sent!\r\n");
sakthipriya 0:7b4c00e3912f 189 pc_bcn.printf("Short packet sent\r\n");
sakthipriya 0:7b4c00e3912f 190
sakthipriya 0:7b4c00e3912f 191 writereg(RF22_REG_07_OPERATING_MODE1,0x00); //standby mode
sakthipriya 0:7b4c00e3912f 192
sakthipriya 0:7b4c00e3912f 193 }
sakthipriya 0:7b4c00e3912f 194 void LONG_BCN_TX()
sakthipriya 0:7b4c00e3912f 195 {
sakthipriya 0:7b4c00e3912f 196 writereg(RF22_REG_6E_TX_DATA_RATE,0x04);
sakthipriya 0:7b4c00e3912f 197 writereg(RF22_REG_6F_TX_DATA_RATE,0xEA);//600 bps
sakthipriya 0:7b4c00e3912f 198 writereg(RF22_REG_3E_PACKET_LENGTH,LONG_TX_DATA); //long packet length
sakthipriya 0:7b4c00e3912f 199 wait(0.02);
sakthipriya 0:7b4c00e3912f 200
sakthipriya 0:7b4c00e3912f 201
sakthipriya 0:7b4c00e3912f 202 //get long_beacon array
sakthipriya 0:7b4c00e3912f 203
sakthipriya 0:7b4c00e3912f 204 uint8_t Long_beacon[75];
sakthipriya 0:7b4c00e3912f 205 for(int i = 0;i<75;i++)
sakthipriya 0:7b4c00e3912f 206 {
sakthipriya 0:7b4c00e3912f 207 Long_beacon[i] = 0xA0;
sakthipriya 0:7b4c00e3912f 208 }
sakthipriya 0:7b4c00e3912f 209
sakthipriya 0:7b4c00e3912f 210
sakthipriya 0:7b4c00e3912f 211
sakthipriya 0:7b4c00e3912f 212
sakthipriya 0:7b4c00e3912f 213 //setModeIdle();
sakthipriya 0:7b4c00e3912f 214 writereg(RF22_REG_07_OPERATING_MODE1,0x01); //ready mode
sakthipriya 0:7b4c00e3912f 215 clearTxBuf();
sakthipriya 0:7b4c00e3912f 216 //writing data first time
sakthipriya 0:7b4c00e3912f 217 cs = 0;
sakthipriya 0:7b4c00e3912f 218 spi.write(0xFF);
sakthipriya 0:7b4c00e3912f 219 for(int i=0; i<60;i++)
sakthipriya 0:7b4c00e3912f 220 {
sakthipriya 0:7b4c00e3912f 221 spi.write(Long_beacon[i]);
sakthipriya 0:7b4c00e3912f 222 }
sakthipriya 0:7b4c00e3912f 223 cs = 1;
sakthipriya 0:7b4c00e3912f 224
sakthipriya 0:7b4c00e3912f 225 //Set to Tx mode
sakthipriya 0:7b4c00e3912f 226 writereg(RF22_REG_07_OPERATING_MODE1,0x09);
sakthipriya 0:7b4c00e3912f 227
sakthipriya 0:7b4c00e3912f 228 //Check for fifoThresh
sakthipriya 0:7b4c00e3912f 229 while((readreg(RF22_REG_03_INTERRUPT_STATUS1) & 0x20) != 0x20);
sakthipriya 0:7b4c00e3912f 230
sakthipriya 0:7b4c00e3912f 231 cs = 0;
sakthipriya 0:7b4c00e3912f 232 spi.write(0xFF);
sakthipriya 0:7b4c00e3912f 233 for(int i=60; i<75;i++)
sakthipriya 0:7b4c00e3912f 234 {
sakthipriya 0:7b4c00e3912f 235 spi.write(Long_beacon[i]);
sakthipriya 0:7b4c00e3912f 236 }
sakthipriya 0:7b4c00e3912f 237 cs = 1;
sakthipriya 0:7b4c00e3912f 238 wait(0.01);
sakthipriya 0:7b4c00e3912f 239 //Check for fifoThresh
sakthipriya 0:7b4c00e3912f 240 while((readreg(RF22_REG_03_INTERRUPT_STATUS1) & 0x20) != 0x20);
sakthipriya 0:7b4c00e3912f 241
sakthipriya 0:7b4c00e3912f 242 //Check for packetsent interrupt
sakthipriya 0:7b4c00e3912f 243 while((readreg(RF22_REG_03_INTERRUPT_STATUS1) & 0x04) != 0x04);
sakthipriya 0:7b4c00e3912f 244
sakthipriya 0:7b4c00e3912f 245 pc_bcn.printf("Long packet sent\r\n");
sakthipriya 0:7b4c00e3912f 246
sakthipriya 0:7b4c00e3912f 247 writereg(RF22_REG_07_OPERATING_MODE1,0x00); //standby mode
sakthipriya 0:7b4c00e3912f 248 }
sakthipriya 0:7b4c00e3912f 249 void reset_uC()
sakthipriya 0:7b4c00e3912f 250 {
sakthipriya 0:7b4c00e3912f 251 P_BCN_INIT();
sakthipriya 0:7b4c00e3912f 252 }
sakthipriya 0:7b4c00e3912f 253 void writereg(uint8_t reg,uint8_t val)
sakthipriya 0:7b4c00e3912f 254 {
sakthipriya 0:7b4c00e3912f 255 uint8_t count = 0;
sakthipriya 0:7b4c00e3912f 256 for(;;count++)
sakthipriya 0:7b4c00e3912f 257 {
sakthipriya 0:7b4c00e3912f 258 int read_val =0; cs = 0;spi.write(reg | 0x80);spi.write(val);cs = 1;
sakthipriya 0:7b4c00e3912f 259 if(reg != 0x7 && reg != 0x58 && reg != 0xF)
sakthipriya 0:7b4c00e3912f 260 {
sakthipriya 0:7b4c00e3912f 261 read_val = readreg(reg);
sakthipriya 0:7b4c00e3912f 262 if (read_val == val)
sakthipriya 0:7b4c00e3912f 263 {
sakthipriya 0:7b4c00e3912f 264 break;
sakthipriya 0:7b4c00e3912f 265 }
sakthipriya 0:7b4c00e3912f 266 else if(count == 5)
sakthipriya 0:7b4c00e3912f 267 {
sakthipriya 0:7b4c00e3912f 268 reset_uC(), printf("reg = 0x%X\n",reg);break;
sakthipriya 0:7b4c00e3912f 269 }
sakthipriya 0:7b4c00e3912f 270 }
sakthipriya 0:7b4c00e3912f 271 else
sakthipriya 0:7b4c00e3912f 272 break;
sakthipriya 0:7b4c00e3912f 273 }
sakthipriya 0:7b4c00e3912f 274 }
sakthipriya 0:7b4c00e3912f 275 uint8_t readreg(uint8_t reg)
sakthipriya 0:7b4c00e3912f 276 {
sakthipriya 0:7b4c00e3912f 277 uint8_t val;cs = 0;spi.write(reg & ~0x80);val = spi.write(0);cs = 1;return val;
sakthipriya 0:7b4c00e3912f 278 }
sakthipriya 0:7b4c00e3912f 279 void clearTxBuf()
sakthipriya 0:7b4c00e3912f 280 {
sakthipriya 0:7b4c00e3912f 281 writereg(RF22_REG_08_OPERATING_MODE2,0x01);
sakthipriya 0:7b4c00e3912f 282 writereg(RF22_REG_08_OPERATING_MODE2,0x00);
sakthipriya 0:7b4c00e3912f 283 }
sakthipriya 0:7b4c00e3912f 284 uint8_t setFrequency(double centre,float afcPullInRange)
sakthipriya 0:7b4c00e3912f 285 {
sakthipriya 0:7b4c00e3912f 286 uint8_t fbsel = 0x40;
sakthipriya 0:7b4c00e3912f 287 uint8_t afclimiter;
sakthipriya 0:7b4c00e3912f 288 if (centre >= 480.0) {
sakthipriya 0:7b4c00e3912f 289 centre /= 2;
sakthipriya 0:7b4c00e3912f 290 fbsel |= 0x20;
sakthipriya 0:7b4c00e3912f 291 afclimiter = afcPullInRange * 1000000.0 / 1250.0;
sakthipriya 0:7b4c00e3912f 292 } else {
sakthipriya 0:7b4c00e3912f 293 if (afcPullInRange < 0.0 || afcPullInRange > 0.159375)
sakthipriya 0:7b4c00e3912f 294 return false;
sakthipriya 0:7b4c00e3912f 295 afclimiter = afcPullInRange * 1000000.0 / 625.0;
sakthipriya 0:7b4c00e3912f 296 }
sakthipriya 0:7b4c00e3912f 297 centre /= 10.0;
sakthipriya 0:7b4c00e3912f 298 double integerPart = floor(centre);
sakthipriya 0:7b4c00e3912f 299 double fractionalPart = centre - integerPart;
sakthipriya 0:7b4c00e3912f 300
sakthipriya 0:7b4c00e3912f 301 uint8_t fb = (uint8_t)integerPart - 24; // Range 0 to 23
sakthipriya 0:7b4c00e3912f 302 fbsel |= fb;
sakthipriya 0:7b4c00e3912f 303 uint16_t fc = fractionalPart * 64000;
sakthipriya 0:7b4c00e3912f 304 writereg(RF22_REG_73_FREQUENCY_OFFSET1, 0); // REVISIT
sakthipriya 0:7b4c00e3912f 305 writereg(RF22_REG_74_FREQUENCY_OFFSET2, 0);
sakthipriya 0:7b4c00e3912f 306 writereg(RF22_REG_75_FREQUENCY_BAND_SELECT, fbsel);
sakthipriya 0:7b4c00e3912f 307 writereg(RF22_REG_76_NOMINAL_CARRIER_FREQUENCY1, fc >> 8);
sakthipriya 0:7b4c00e3912f 308 writereg(RF22_REG_77_NOMINAL_CARRIER_FREQUENCY0, fc & 0xff);
sakthipriya 0:7b4c00e3912f 309 writereg(RF22_REG_2A_AFC_LIMITER, afclimiter);
sakthipriya 0:7b4c00e3912f 310 return 0;
sakthipriya 0:7b4c00e3912f 311 }
sakthipriya 0:7b4c00e3912f 312
sakthipriya 0:7b4c00e3912f 313
sakthipriya 0:7b4c00e3912f 314 void Init_BEACON_HW()
sakthipriya 0:7b4c00e3912f 315 {
sakthipriya 0:7b4c00e3912f 316 cs=1; // chip must be deselected
sakthipriya 0:7b4c00e3912f 317 spi.format(8,0);
sakthipriya 0:7b4c00e3912f 318 spi.frequency(10000000); //10MHz SCLK
sakthipriya 0:7b4c00e3912f 319
sakthipriya 0:7b4c00e3912f 320 //should either have a flag for invalid SPI or discard this for actual case or add reset
sakthipriya 0:7b4c00e3912f 321 if (readreg(RF22_REG_00_DEVICE_TYPE) == 0x08)
sakthipriya 0:7b4c00e3912f 322 pc_bcn.printf("spi connection valid\r\n");
sakthipriya 0:7b4c00e3912f 323 else
sakthipriya 0:7b4c00e3912f 324 {pc_bcn.printf("error in spi connection\r\n");
sakthipriya 0:7b4c00e3912f 325 reset_uC();
sakthipriya 0:7b4c00e3912f 326 }
sakthipriya 0:7b4c00e3912f 327
sakthipriya 0:7b4c00e3912f 328 writereg(RF22_REG_07_OPERATING_MODE1,0x80); //sw_reset
sakthipriya 0:7b4c00e3912f 329 wait(1); //takes time to reset
sakthipriya 0:7b4c00e3912f 330
sakthipriya 0:7b4c00e3912f 331 clearTxBuf();
sakthipriya 0:7b4c00e3912f 332
sakthipriya 0:7b4c00e3912f 333 writereg(RF22_REG_07_OPERATING_MODE1,0x00); //standby mode
sakthipriya 0:7b4c00e3912f 334
sakthipriya 0:7b4c00e3912f 335 //txfifoalmostempty
sakthipriya 0:7b4c00e3912f 336 writereg(RF22_REG_7D_TX_FIFO_CONTROL2,30);
sakthipriya 0:7b4c00e3912f 337
sakthipriya 0:7b4c00e3912f 338 //Packet-engine registers
sakthipriya 0:7b4c00e3912f 339 writereg(RF22_REG_30_DATA_ACCESS_CONTROL,0x00);
sakthipriya 0:7b4c00e3912f 340
sakthipriya 0:7b4c00e3912f 341 writereg(RF22_REG_33_HEADER_CONTROL2,0x08);
sakthipriya 0:7b4c00e3912f 342 writereg(RF22_REG_34_PREAMBLE_LENGTH,0x00);
sakthipriya 0:7b4c00e3912f 343
sakthipriya 0:7b4c00e3912f 344 writereg(RF22_REG_0B_GPIO_CONFIGURATION0,0x15); // TX state
sakthipriya 0:7b4c00e3912f 345 writereg(RF22_REG_0C_GPIO_CONFIGURATION1,0x12); // RX state
sakthipriya 0:7b4c00e3912f 346
sakthipriya 0:7b4c00e3912f 347 setFrequency(435.0,05);
sakthipriya 0:7b4c00e3912f 348
sakthipriya 0:7b4c00e3912f 349 if((readreg(RF22_REG_02_DEVICE_STATUS)& 0x08)!= 0x00)
sakthipriya 0:7b4c00e3912f 350 {
sakthipriya 0:7b4c00e3912f 351 //pc_bcn.printf("frequency not set properly\r\n");
sakthipriya 0:7b4c00e3912f 352 reset_uC();
sakthipriya 0:7b4c00e3912f 353 }
sakthipriya 0:7b4c00e3912f 354
sakthipriya 0:7b4c00e3912f 355 //set Modem Configuration
sakthipriya 0:7b4c00e3912f 356 writereg(RF22_REG_1C_IF_FILTER_BANDWIDTH,0xdf);
sakthipriya 0:7b4c00e3912f 357 writereg(RF22_REG_1F_CLOCK_RECOVERY_GEARSHIFT_OVERRIDE,0x03);
sakthipriya 0:7b4c00e3912f 358 writereg(RF22_REG_20_CLOCK_RECOVERY_OVERSAMPLING_RATE,0x39);
sakthipriya 0:7b4c00e3912f 359 writereg(RF22_REG_21_CLOCK_RECOVERY_OFFSET2,0x20);
sakthipriya 0:7b4c00e3912f 360 writereg(RF22_REG_22_CLOCK_RECOVERY_OFFSET1,0x68); //updated 20 to 25 reg values from excel sheet for 1.2 Khz freq. deviation,fsk
sakthipriya 0:7b4c00e3912f 361 writereg(RF22_REG_23_CLOCK_RECOVERY_OFFSET0,0xdc);
sakthipriya 0:7b4c00e3912f 362 writereg(RF22_REG_24_CLOCK_RECOVERY_TIMING_LOOP_GAIN1,0x00);
sakthipriya 0:7b4c00e3912f 363 writereg(RF22_REG_25_CLOCK_RECOVERY_TIMING_LOOP_GAIN0,0x6B);
sakthipriya 0:7b4c00e3912f 364 writereg(RF22_REG_2C_OOK_COUNTER_VALUE_1,0x2C);
sakthipriya 0:7b4c00e3912f 365 writereg(RF22_REG_2D_OOK_COUNTER_VALUE_2,0x11); //not required for fsk (OOK counter value)
sakthipriya 0:7b4c00e3912f 366 writereg(RF22_REG_2E_SLICER_PEAK_HOLD,0x2A); //??
sakthipriya 0:7b4c00e3912f 367 writereg(RF22_REG_58,0x80);
sakthipriya 0:7b4c00e3912f 368 writereg(RF22_REG_69_AGC_OVERRIDE1,0x60);
sakthipriya 0:7b4c00e3912f 369
sakthipriya 0:7b4c00e3912f 370 //Data rate set later
sakthipriya 0:7b4c00e3912f 371
sakthipriya 0:7b4c00e3912f 372 writereg(RF22_REG_70_MODULATION_CONTROL1,0x20);
sakthipriya 0:7b4c00e3912f 373 writereg(RF22_REG_71_MODULATION_CONTROL2,0x21);//ook = 0x21
sakthipriya 0:7b4c00e3912f 374
sakthipriya 0:7b4c00e3912f 375 //set tx power
sakthipriya 0:7b4c00e3912f 376 writereg(RF22_REG_6D_TX_POWER,0x07); //20dbm
sakthipriya 0:7b4c00e3912f 377
sakthipriya 0:7b4c00e3912f 378 //TX_packet_length written later
sakthipriya 0:7b4c00e3912f 379 }
sakthipriya 0:7b4c00e3912f 380 bool Check_ACK_RECEIVED()
sakthipriya 0:7b4c00e3912f 381 {
sakthipriya 0:7b4c00e3912f 382 if((readreg(RF22_REG_03_INTERRUPT_STATUS1) & 0x04) == 0x04)
sakthipriya 0:7b4c00e3912f 383 {
sakthipriya 0:7b4c00e3912f 384 printf("Packet sent: ACK received\r\n");
sakthipriya 0:7b4c00e3912f 385 return 1;
sakthipriya 0:7b4c00e3912f 386 }
sakthipriya 0:7b4c00e3912f 387 else
sakthipriya 0:7b4c00e3912f 388 {
sakthipriya 0:7b4c00e3912f 389 pc_bcn.printf("Packet not sent\r\n");
sakthipriya 0:7b4c00e3912f 390 return 0;
sakthipriya 0:7b4c00e3912f 391 }
sakthipriya 0:7b4c00e3912f 392 }
sakthipriya 0:7b4c00e3912f 393 /*int main()
sakthipriya 0:7b4c00e3912f 394 {
sakthipriya 0:7b4c00e3912f 395 P_BCN_INIT();
sakthipriya 0:7b4c00e3912f 396
sakthipriya 0:7b4c00e3912f 397 loop.attach(&P_BCN_TX_MAIN, 10.0);
sakthipriya 0:7b4c00e3912f 398
sakthipriya 0:7b4c00e3912f 399 while(t.read() < RF_SILENCE_TIME);
sakthipriya 0:7b4c00e3912f 400
sakthipriya 0:7b4c00e3912f 401 P_BCN_FEN();
sakthipriya 0:7b4c00e3912f 402
sakthipriya 0:7b4c00e3912f 403 while(1);
sakthipriya 0:7b4c00e3912f 404
sakthipriya 0:7b4c00e3912f 405 }*/