Diff: mpr121.h

Revision:

0:a265079d50a2

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mpr121.h	Thu Oct 06 06:49:38 2011 +0000
@@ -0,0 +1,157 @@
+/*
+Copyright (c) 2011 Anthony Buckton (abuckton [at] blackink [dot} net {dot} au)
+
+ 
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+ 
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+ 
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
+   Parts written by Jim Lindblom of Sparkfun
+   Ported to mbed by A.Buckton, Feb 2011
+*/
+
+#ifndef MPR121_H
+#define MPR121_H
+
+//using namespace std;
+
+class Mpr121 
+{
+
+public:
+    // i2c Addresses, bit-shifted
+    enum Address { ADD_VSS = 0xb4,// ADD->VSS = 0x5a <-wiring on Sparkfun board
+                   ADD_VDD = 0xb6,// ADD->VDD = 0x5b
+                   ADD_SCL = 0xb8,// ADD->SDA = 0x5c
+                   ADD_SDA = 0xba // ADD->SCL = 0x5d
+                 };
+
+    // Real initialiser, takes the i2c address of the device.
+    Mpr121(I2C *i2c, Address i2cAddress);
+    
+    bool getProximityMode();
+    
+    void setProximityMode(bool mode);
+    
+    int readTouchData();
+               
+    unsigned char read(int key);
+    
+    int write(int address, unsigned char value);
+    int writeMany(int start, unsigned char* dataSet, int length);
+
+    void setElectrodeThreshold(int electrodeId, unsigned char touchThreshold, unsigned char releaseThreshold);
+        
+protected:
+    // Configures the MPR with standard settings. This is permitted to be overwritten by sub-classes.
+    void configureSettings();
+    
+private:
+    // The I2C bus instance.
+    I2C *i2c;
+
+    // i2c address of this mpr121
+    Address address;
+};
+
+
+// MPR121 Register Defines
+#define    MHD_R        0x2B
+#define    NHD_R        0x2C
+#define    NCL_R        0x2D
+#define    FDL_R        0x2E
+#define    MHD_F        0x2F
+#define    NHD_F        0x30
+#define    NCL_F        0x31
+#define    FDL_F        0x32
+#define    NHDT         0x33
+#define    NCLT         0x34
+#define    FDLT         0x35
+// Proximity sensing controls
+#define    MHDPROXR     0x36
+#define    NHDPROXR     0x37
+#define    NCLPROXR     0x38
+#define    FDLPROXR     0x39
+#define    MHDPROXF     0x3A
+#define    NHDPROXF     0x3B
+#define    NCLPROXF     0x3C
+#define    FDLPROXF     0x3D
+#define    NHDPROXT     0x3E
+#define    NCLPROXT     0x3F
+#define    FDLPROXT     0x40
+// Electrode Touch/Release thresholds
+#define    ELE0_T       0x41
+#define    ELE0_R       0x42
+#define    ELE1_T       0x43
+#define    ELE1_R       0x44
+#define    ELE2_T       0x45
+#define    ELE2_R       0x46
+#define    ELE3_T       0x47
+#define    ELE3_R       0x48
+#define    ELE4_T       0x49
+#define    ELE4_R       0x4A
+#define    ELE5_T       0x4B
+#define    ELE5_R       0x4C
+#define    ELE6_T       0x4D
+#define    ELE6_R       0x4E
+#define    ELE7_T       0x4F
+#define    ELE7_R       0x50
+#define    ELE8_T       0x51
+#define    ELE8_R       0x52
+#define    ELE9_T       0x53
+#define    ELE9_R       0x54
+#define    ELE10_T      0x55
+#define    ELE10_R      0x56
+#define    ELE11_T      0x57
+#define    ELE11_R      0x58
+// Proximity Touch/Release thresholds
+#define    EPROXTTH     0x59
+#define    EPROXRTH     0x5A
+// Debounce configuration
+#define    DEB_CFG      0x5B
+// AFE- Analogue Front End configuration
+#define    AFE_CFG      0x5C 
+// Filter configuration
+#define    FIL_CFG      0x5D
+// Electrode configuration - transistions to "active mode"
+#define    ELE_CFG      0x5E
+
+#define GPIO_CTRL0      0x73
+#define GPIO_CTRL1      0x74
+#define GPIO_DATA       0x75
+#define    GPIO_DIR     0x76
+#define    GPIO_EN      0x77
+#define    GPIO_SET     0x78
+#define GPIO_CLEAR      0x79
+#define GPIO_TOGGLE     0x7A
+// Auto configration registers
+#define    AUTO_CFG_0   0x7B
+#define    AUTO_CFG_U   0x7D
+#define    AUTO_CFG_L   0x7E
+#define    AUTO_CFG_T   0x7F
+
+// Threshold defaults
+// Electrode touch threshold
+#define    E_THR_T      0x0F   
+// Electrode release threshold 
+#define    E_THR_R      0x0A    
+// Prox touch threshold
+#define    PROX_THR_T   0x02
+// Prox release threshold
+#define    PROX_THR_R   0x02
+
+#endif