Diff: arch/lpc_phy_dp83848.c

Revision:

0:8e01dca41002

Child:

2:1a87f74b8e3b

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/arch/lpc_phy_dp83848.c	Thu May 24 15:53:48 2012 +0000
@@ -0,0 +1,268 @@
+/**********************************************************************
+* $Id$		lpc_phy_dp83848.c			2011-11-20
+*//**
+* @file		lpc_phy_dp83848.c
+* @brief	DP83848C PHY status and control.
+* @version	1.0
+* @date		20 Nov. 2011
+* @author	NXP MCU SW Application Team
+*
+* Copyright(C) 2011, NXP Semiconductor
+* All rights reserved.
+*
+***********************************************************************
+* Software that is described herein is for illustrative purposes only
+* which provides customers with programming information regarding the
+* products. This software is supplied "AS IS" without any warranties.
+* NXP Semiconductors assumes no responsibility or liability for the
+* use of the software, conveys no license or title under any patent,
+* copyright, or mask work right to the product. NXP Semiconductors
+* reserves the right to make changes in the software without
+* notification. NXP Semiconductors also make no representation or
+* warranty that such application will be suitable for the specified
+* use without further testing or modification.
+**********************************************************************/
+
+#include "lwip/opt.h"
+#include "lwip/err.h"
+#include "lwip/snmp.h"
+#include "lpc_emac_config.h"
+#include "lpc_phy.h"
+#include "sys_arch.h"
+
+/** @defgroup dp83848_phy	PHY status and control for the DP83848.
+ * @ingroup lwip_phy
+ *
+ * Various functions for controlling and monitoring the status of the
+ * DP83848 PHY. In polled (standalone) systems, the PHY state must be
+ * monitored as part of the application. In a threaded (RTOS) system,
+ * the PHY state is monitored by the PHY handler thread. The MAC
+ * driver will not transmit unless the PHY link is active.
+ * @{
+ */
+
+/** \brief  DP83848 PHY register offsets */
+#define DP8_BMCR_REG        0x0  /**< Basic Mode Control Register */
+#define DP8_BMSR_REG        0x1  /**< Basic Mode Status Reg */
+#define DP8_ANADV_REG       0x4  /**< Auto_Neg Advt Reg  */
+#define DP8_ANLPA_REG       0x5  /**< Auto_neg Link Partner Ability Reg */
+#define DP8_ANEEXP_REG      0x6  /**< Auto-neg Expansion Reg  */
+#define DP8_PHY_STAT_REG    0x10 /**< PHY Status Register  */
+#define DP8_PHY_INT_CTL_REG 0x11 /**< PHY Interrupt Control Register */
+#define DP8_PHY_STS_REG     0x19 /**< PHY Status Register  */
+
+/** \brief DP83848 Control register definitions */
+#define DP8_RESET          (1 << 15)  /**< 1= S/W Reset */
+#define DP8_LOOPBACK       (1 << 14)  /**< 1=loopback Enabled */
+#define DP8_SPEED_SELECT   (1 << 13)  /**< 1=Select 100MBps */
+#define DP8_AUTONEG        (1 << 12)  /**< 1=Enable auto-negotiation */
+#define DP8_POWER_DOWN     (1 << 11)  /**< 1=Power down PHY */
+#define DP8_ISOLATE        (1 << 10)  /**< 1=Isolate PHY */
+#define DP8_RESTART_AUTONEG (1 << 9)  /**< 1=Restart auto-negoatiation */
+#define DP8_DUPLEX_MODE    (1 << 8)   /**< 1=Full duplex mode */
+#define DP8_COLLISION_TEST (1 << 7)   /**< 1=Perform collsion test */
+
+/** \brief DP83848 Status register definitions */
+#define DP8_100BASE_T4     (1 << 15)  /**< T4 mode */
+#define DP8_100BASE_TX_FD  (1 << 14)  /**< 100MBps full duplex */
+#define DP8_100BASE_TX_HD  (1 << 13)  /**< 100MBps half duplex */
+#define DP8_10BASE_T_FD    (1 << 12)  /**< 100Bps full duplex */
+#define DP8_10BASE_T_HD    (1 << 11)  /**< 10MBps half duplex */
+#define DP8_MF_PREAMB_SUPPR (1 << 6)  /**< Preamble suppress */
+#define DP8_AUTONEG_COMP   (1 << 5)   /**< Auto-negotation complete */
+#define DP8_RMT_FAULT      (1 << 4)   /**< Fault */
+#define DP8_AUTONEG_ABILITY (1 << 3)  /**< Auto-negotation supported */
+#define DP8_LINK_STATUS    (1 << 2)   /**< 1=Link active */
+#define DP8_JABBER_DETECT  (1 << 1)   /**< Jabber detect */
+#define DP8_EXTEND_CAPAB   (1 << 0)   /**< Supports extended capabilities */
+
+/** \brief DP83848 PHY status definitions */
+#define DP8_REMOTEFAULT    (1 << 6)   /**< Remote fault */
+#define DP8_FULLDUPLEX     (1 << 2)   /**< 1=full duplex */
+#define DP8_SPEED10MBPS    (1 << 1)   /**< 1=10MBps speed */
+#define DP8_VALID_LINK     (1 << 0)   /**< 1=Link active */
+
+/** \brief DP83848 PHY ID register definitions */
+#define DP8_PHYID1_OUI     0x2000     /**< Expected PHY ID1 */
+#define DP8_PHYID2_OUI     0x5c90     /**< Expected PHY ID2 */
+
+/** \brief PHY status structure used to indicate current status of PHY.
+ */
+typedef struct {
+	u32_t     phy_speed_100mbs:1; /**< 10/100 MBS connection speed flag. */
+	u32_t     phy_full_duplex:1;  /**< Half/full duplex connection speed flag. */
+	u32_t     phy_link_active:1;  /**< Phy link active flag. */
+} PHY_STATUS_TYPE;
+
+/** \brief  PHY update flags */
+static PHY_STATUS_TYPE physts;
+
+/** \brief  Last PHY update flags, used for determing if something has changed */
+static PHY_STATUS_TYPE olddphysts;
+
+/** \brief  PHY update counter for state machine */
+static s32_t phyustate;
+
+/** \brief  Update PHY status from passed value
+ *
+ *  This function updates the current PHY status based on the
+ *  passed PHY status word. The PHY status indicate if the link
+ *  is active, the connection speed, and duplex.
+ *
+ *  \param[in]    netif   NETIF structure
+ *  \param[in]    linksts Status word from PHY
+ *  \return        1 if the status has changed, otherwise 0
+ */
+static s32_t lpc_update_phy_sts(struct netif *netif, u32_t linksts)
+{
+	s32_t changed = 0;
+
+	/* Update link active status */
+	if (linksts & DP8_VALID_LINK)
+		physts.phy_link_active = 1;
+	else
+		physts.phy_link_active = 0;
+
+	/* Full or half duplex */
+	if (linksts & DP8_FULLDUPLEX)
+		physts.phy_full_duplex = 1;
+	else
+		physts.phy_full_duplex = 0;
+
+	/* Configure 100MBit/10MBit mode. */
+	if (linksts & DP8_SPEED10MBPS)
+		physts.phy_speed_100mbs = 0;
+	else
+		physts.phy_speed_100mbs = 1;
+
+	if (physts.phy_speed_100mbs != olddphysts.phy_speed_100mbs) {
+		changed = 1;
+		if (physts.phy_speed_100mbs) {
+			/* 100MBit mode. */
+			lpc_emac_set_speed(1);
+
+			NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 100000000);
+		}
+		else {
+			/* 10MBit mode. */
+			lpc_emac_set_speed(0);
+
+			NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 10000000);
+		}
+
+		olddphysts.phy_speed_100mbs = physts.phy_speed_100mbs;
+	}
+
+	if (physts.phy_full_duplex != olddphysts.phy_full_duplex) {
+		changed = 1;
+		if (physts.phy_full_duplex)
+			lpc_emac_set_duplex(1);
+		else
+			lpc_emac_set_duplex(0);
+
+		olddphysts.phy_full_duplex = physts.phy_full_duplex;
+	}
+
+	if (physts.phy_link_active != olddphysts.phy_link_active) {
+		changed = 1;
+		if (physts.phy_link_active)
+			netif_set_link_up(netif);
+		else
+			netif_set_link_down(netif);
+
+		olddphysts.phy_link_active = physts.phy_link_active;
+	}
+
+	return changed;
+}
+
+/** \brief  Initialize the DP83848 PHY.
+ *
+ *  This function initializes the DP83848 PHY. It will block until
+ *  complete. This function is called as part of the EMAC driver
+ *  initialization. Configuration of the PHY at startup is
+ *  controlled by setting up configuration defines in lpc_phy.h.
+ *
+ *  \param[in]     netif   NETIF structure
+ *  \return         ERR_OK if the setup was successful, otherwise ERR_TIMEOUT
+ */
+err_t lpc_phy_init(struct netif *netif)
+{
+	u32_t tmp;
+	s32_t i;
+
+	physts.phy_speed_100mbs = olddphysts.phy_speed_100mbs = 2;
+	physts.phy_full_duplex = olddphysts.phy_full_duplex = 2;
+	physts.phy_link_active = olddphysts.phy_link_active = 2;
+	phyustate = 0;
+
+	/* Only first read and write are checked for failure */
+	/* Put the DP83848C in reset mode and wait for completion */
+	if (lpc_mii_write(DP8_BMCR_REG, DP8_RESET) != 0)
+		return ERR_TIMEOUT;
+	i = 400;
+	while (i > 0) {
+	    osDelay(1);   /* 1 ms */
+		if (lpc_mii_read(DP8_BMCR_REG, &tmp) != 0)
+			return ERR_TIMEOUT;
+
+		if (!(tmp & (DP8_RESET | DP8_POWER_DOWN)))
+			i = -1;
+		else
+			i--;
+	}
+	/* Timeout? */
+	if (i == 0)
+		return ERR_TIMEOUT;
+
+	/* Setup link based on configuration options */
+#if PHY_USE_AUTONEG==1
+	tmp = DP8_AUTONEG;
+#else
+	tmp = 0;
+#endif
+#if PHY_USE_100MBS==1
+	tmp |= DP8_SPEED_SELECT;
+#endif
+#if PHY_USE_FULL_DUPLEX==1
+	tmp |= DP8_DUPLEX_MODE;
+#endif
+	lpc_mii_write(DP8_BMCR_REG, tmp);
+
+	/* The link is not set active at this point, but will be detected
+       later */
+
+	return ERR_OK;
+}
+
+/* Phy status update state machine */
+s32_t lpc_phy_sts_sm(struct netif *netif)
+{
+	s32_t changed = 0;
+
+	switch (phyustate) {
+		default:
+		case 0:
+			/* Read BMSR to clear faults */
+			lpc_mii_read_noblock(DP8_PHY_STAT_REG);
+			phyustate = 1;
+			break;
+
+		case 1:
+			/* Wait for read status state */
+			if (!lpc_mii_is_busy()) {
+				/* Update PHY status */
+				changed = lpc_update_phy_sts(netif, lpc_mii_read_data());
+				phyustate = 0;
+			}
+			break;
+	}
+
+	return changed;
+}
+
+/**
+ * @}
+ */
+
+/* --------------------------------- End Of File ------------------------------ */