Pedro Correia / mbed-dev

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Fork of mbed-dev by mbed official

Diff: targets/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_rtc.h

Revision:
182:a56a73fd2a6f
Parent:
167:e84263d55307
--- a/targets/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_rtc.h	Fri Feb 16 16:09:33 2018 +0000
+++ b/targets/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_rtc.h	Tue Mar 20 16:56:18 2018 +0000
@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_rtc.h
   * @author  MCD Application Team
-  * @version V1.7.1
-  * @date    14-April-2017
   * @brief   Header file of RTC HAL module.
   ******************************************************************************
   * @attention
@@ -424,14 +422,14 @@
   */
 
 /** @brief Reset RTC handle state
-  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
 #define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET)
 
 /**
   * @brief  Disable the write protection for RTC registers.
-  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
 #define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__)             \
@@ -442,7 +440,7 @@
 
 /**
   * @brief  Enable the write protection for RTC registers.
-  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
 #define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__)              \
@@ -452,36 +450,36 @@
  
 /**
   * @brief  Enable the RTC ALARMA peripheral.
-  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
 #define __HAL_RTC_ALARMA_ENABLE(__HANDLE__)                           ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE))
 
 /**
   * @brief  Disable the RTC ALARMA peripheral.
-  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
 #define __HAL_RTC_ALARMA_DISABLE(__HANDLE__)                          ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE))
 
 /**
   * @brief  Enable the RTC ALARMB peripheral.
-  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
 #define __HAL_RTC_ALARMB_ENABLE(__HANDLE__)                           ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE))
 
 /**
   * @brief  Disable the RTC ALARMB peripheral.
-  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
 #define __HAL_RTC_ALARMB_DISABLE(__HANDLE__)                          ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE))
 
 /**
   * @brief  Enable the RTC Alarm interrupt.
-  * @param  __HANDLE__: specifies the RTC handle.
-  * @param  __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled. 
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled. 
   *          This parameter can be any combination of the following values:
   *             @arg RTC_IT_ALRA: Alarm A interrupt
   *             @arg RTC_IT_ALRB: Alarm B interrupt  
@@ -491,8 +489,8 @@
 
 /**
   * @brief  Disable the RTC Alarm interrupt.
-  * @param  __HANDLE__: specifies the RTC handle.
-  * @param  __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled. 
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled. 
   *         This parameter can be any combination of the following values:
   *            @arg RTC_IT_ALRA: Alarm A interrupt
   *            @arg RTC_IT_ALRB: Alarm B interrupt  
@@ -502,8 +500,8 @@
 
 /**
   * @brief  Check whether the specified RTC Alarm interrupt has occurred or not.
-  * @param  __HANDLE__: specifies the RTC handle.
-  * @param  __INTERRUPT__: specifies the RTC Alarm interrupt to check.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __INTERRUPT__ specifies the RTC Alarm interrupt to check.
   *         This parameter can be:
   *            @arg RTC_IT_ALRA: Alarm A interrupt
   *            @arg RTC_IT_ALRB: Alarm B interrupt  
@@ -513,8 +511,8 @@
 
 /**
   * @brief  Get the selected RTC Alarm's flag status.
-  * @param  __HANDLE__: specifies the RTC handle.
-  * @param  __FLAG__: specifies the RTC Alarm Flag to check.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __FLAG__ specifies the RTC Alarm Flag to check.
   *         This parameter can be:
   *            @arg RTC_FLAG_ALRAF
   *            @arg RTC_FLAG_ALRBF
@@ -526,8 +524,8 @@
 
 /**
   * @brief  Clear the RTC Alarm's pending flags.
-  * @param  __HANDLE__: specifies the RTC handle.
-  * @param  __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __FLAG__ specifies the RTC Alarm Flag sources to be enabled or disabled.
   *          This parameter can be:
   *             @arg RTC_FLAG_ALRAF
   *             @arg RTC_FLAG_ALRBF 
@@ -538,8 +536,8 @@
   
 /**
   * @brief  Check whether the specified RTC Alarm interrupt has been enabled or not.
-  * @param  __HANDLE__: specifies the RTC handle.
-  * @param  __INTERRUPT__: specifies the RTC Alarm interrupt sources to check.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __INTERRUPT__ specifies the RTC Alarm interrupt sources to check.
   *         This parameter can be:
   *            @arg RTC_IT_ALRA: Alarm A interrupt
   *            @arg RTC_IT_ALRB: Alarm B interrupt