Forked repository to push EVAL-AD593x updates
Dependencies: platform_drivers
Diff: README.txt
- Revision:
- 2:e1ded67fedf9
- Parent:
- 1:bd8aea0d51e0
- Child:
- 3:0ac30e539fc7
diff -r bd8aea0d51e0 -r e1ded67fedf9 README.txt --- a/README.txt Mon Sep 16 14:08:37 2019 +0000 +++ b/README.txt Mon Sep 16 14:22:51 2019 +0000 @@ -1,6 +1,9 @@ Evaluation Boards/Products Supported ------------------------------------ -DIGILENT PMOD 1A +AD5933 +AD5934 + +Recommended Evaluation Board DIGILENT PMOD 1A Overview @@ -9,24 +12,23 @@ listed above and communicate with EVAL-AD56XX board. This code was developed and tested on SDP-K1 controller board https://os.mbed.com/platforms/SDP_K1/. -Product details: https://www.analog.com/en/products/ad5686.html -Eval board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD5686R.html -User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/nanodac-mbed +Product details: https://www.analog.com/en/products/ad5933.html +User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/ad5933-mbed Hardware Setup -------------- -Required: SDP-K1 (or alternative MBED enabled controller board), EVAL-AD56XX, +Required: SDP-K1 (or alternative MBED enabled controller board), evaluation-board - recommend Digilent PMOD 1A, USB cable. -Plug in the EVAL-AD124 board on SDP-K1 board (or any other Mbed enabled -controller board) using the SDP connector and screws. +Connect the SPI port on the SDP-K1 board (or any other Mbed enabled +controller board) using short jumper-wires. Connect SDP-K1 board to the PC using the USB cable. How to Get Started ------------------ Open Mbed online compiler. https://ide.mbed.com/compiler -Import Code into compiler from here: https://os.mbed.com/teams/AnalogDevices/code/EVAL-AD568x-AD569x/ +Import Code into compiler from here: https://os.mbed.com/teams/AnalogDevices/code/EVAL-AD593x/ instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v5.12/tools/importing-code.html Compile code. Drag and drop binary into SDP-K1 controller board. Find detailed instructions here: https://os.mbed.com/docs/mbed-os/v5.12/tools/getting-your-program-on-your-board.html