PixArt Imaging / Pixart_Gesture

PixArt Gesture Library for nRF051

Dependents:   Gesture_Keyboard PAJ7620_Gesture

You are viewing an older revision! See the latest version

Homepage

Table of Contents

  1. Setup
  2. Hardware:
  3. Connection:
  4. Supplying Power
  5. Functional Test

This section highlights the setup and operating guide to integrating PAJ7620 with the Nordic nRF51 DK board.

Setup

Hardware:

  • 1. PC with Windows Operating System
  • 2. nRF51 Dev Kit Board from Nordic
  • 3. PAK7620H1 Arduino Enabled Board
  • 4. USB Cable (one end with microUSB)

Connection:

Please connect the board as show below.

/media/uploads/pixus_mbed/connection.jpg

Supplying Power

Connect the one end of the USB to the PC USB and the other to the Nordic micro USB as shown in the figure below.

/media/uploads/pixus_mbed/connecting_power.jpg

I am assuming that you already know and are able to download the code at this point.

Do remember to reset the Nordic Board after downloading the code on the Nordic device by pushing on the button illustrated below.

/media/uploads/pixus_mbed/resetting_nordic.png

Next, we will test to see if the sensor is indeed functional and deriving the Heart Rate.

Functional Test

Have fun with this and let us know if you have any further questions!

All wikipages