CodeZoo co., ltd
Mbed OS example of Pelion device management LGUPlus Client
Revision 2:34933ca5af82, committed 2020-02-21
- Comitter:
- pimco01
- Date:
- Fri Feb 21 19:27:19 2020 +0000
- Parent:
- 1:3f3d8bf46183
- Commit message:
- main.cpp, app.json modify
Changed in this revision
| main.cpp | Show annotated file Show diff for this revision Revisions of this file |
| mbed_app.json | Show annotated file Show diff for this revision Revisions of this file |
--- a/main.cpp Fri Feb 21 19:20:41 2020 +0000
+++ b/main.cpp Fri Feb 21 19:27:19 2020 +0000
@@ -1,33 +1,48 @@
-/*
- * Copyright (c) 2017 ARM Limited. All rights reserved.
- * SPDX-License-Identifier: Apache-2.0
- * Licensed under the Apache License, Version 2.0 (the License); you may
- * not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an AS IS BASIS, WITHOUT
- * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
+// ----------------------------------------------------------------------------
+// Copyright 2016-2020 ARM Ltd.
+//
+// SPDX-License-Identifier: Apache-2.0
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// ----------------------------------------------------------------------------
+#ifndef MBED_TEST_MODE
+#include "mbed.h"
+#include "kv_config.h"
+#include "mbed-cloud-client/MbedCloudClient.h" // Required for new MbedCloudClient()
+#include "factory_configurator_client.h" // Required for fcc_* functions and FCC_* defines
+#include "m2mresource.h" // Required for M2MResource
+#include "key_config_manager.h" // Required for kcm_factory_reset
-#include "mbed.h"
-#include "rtos.h"
-#include "common_functions.h"
-#include "CellularNonIPSocket.h"
-#include "CellularDevice.h"
-#include "UDPSocket.h"
-#include "CellularLog.h"
+#include "mbed-trace/mbed_trace.h" // Required for mbed_trace_*
+
+// Pointers to the resources that will be created in main_application().
+static MbedCloudClient *cloud_client;
+static bool cloud_client_running = true;
+static NetworkInterface *network = NULL;
+
+// Fake entropy needed for non-TRNG boards. Suitable only for demo devices.
+const uint8_t MBED_CLOUD_DEV_ENTROPY[] = { 0xf6, 0xd6, 0xc0, 0x09, 0x9e, 0x6e, 0xf2, 0x37, 0xdc, 0x29, 0x88, 0xf1, 0x57, 0x32, 0x7d, 0xde, 0xac, 0xb3, 0x99, 0x8c, 0xb9, 0x11, 0x35, 0x18, 0xeb, 0x48, 0x29, 0x03, 0x6a, 0x94, 0x6d, 0xe8, 0x40, 0xc0, 0x28, 0xcc, 0xe4, 0x04, 0xc3, 0x1f, 0x4b, 0xc2, 0xe0, 0x68, 0xa0, 0x93, 0xe6, 0x3a };
-#define UDP 0
-#define TCP 1
-#define NONIP 2
+static M2MResource* m2m_get_res;
+static M2MResource* m2m_put_res;
+static M2MResource* m2m_post_res;
+static M2MResource* m2m_deregister_res;
+static M2MResource* m2m_factory_reset_res;
+static SocketAddress sa;
-// Number of retries /
-#define RETRY_COUNT 3
+EventQueue queue(32 * EVENTS_EVENT_SIZE);
+Thread t;
+Mutex value_increment_mutex;
void BG96_Modem_PowerON(void)
{
@@ -41,7 +56,7 @@
ThisThread::sleep_for(5000);
if(BG96_STATUS)
- printf("Module Power On\r\n");
+ printf("Module Power On~~\r\n");
else
printf("Check Module Power Line!!\r\n");
}
@@ -63,265 +78,219 @@
printf("Check Module Power Line!!\r\n");
}
-NetworkInterface *iface;
-
-// Echo server hostname
-const char *host_name = MBED_CONF_APP_ECHO_SERVER_HOSTNAME;
-
-// Echo server port (same for TCP and UDP)
-const int port = MBED_CONF_APP_ECHO_SERVER_PORT;
-
-static rtos::Mutex trace_mutex;
-
-#if MBED_CONF_MBED_TRACE_ENABLE
-static void trace_wait()
+void print_client_ids(void)
{
- trace_mutex.lock();
+ printf("Account ID: %s\n", cloud_client->endpoint_info()->account_id.c_str());
+ printf("Endpoint name: %s\n", cloud_client->endpoint_info()->internal_endpoint_name.c_str());
+ printf("Device ID: %s\n\n", cloud_client->endpoint_info()->endpoint_name.c_str());
}
-static void trace_release()
+void value_increment(void)
{
- trace_mutex.unlock();
+ value_increment_mutex.lock();
+ m2m_get_res->set_value(m2m_get_res->get_value_int() + 1);
+ printf("Counter %" PRIu64 "\n", m2m_get_res->get_value_int());
+ value_increment_mutex.unlock();
}
-static char time_st[50];
-
-static char* trace_time(size_t ss)
+void get_res_update(const char* /*object_name*/)
{
- snprintf(time_st, 49, "[%08llums]", Kernel::get_ms_count());
- return time_st;
+ printf("Counter resource set to %d\n", (int)m2m_get_res->get_value_int());
}
-static void trace_open()
+void put_res_update(const char* /*object_name*/)
{
- mbed_trace_init();
- mbed_trace_prefix_function_set( &trace_time );
+ printf("PUT update %d\n", (int)m2m_put_res->get_value_int());
+}
- mbed_trace_mutex_wait_function_set(trace_wait);
- mbed_trace_mutex_release_function_set(trace_release);
-
- mbed_cellular_trace::mutex_wait_function_set(trace_wait);
- mbed_cellular_trace::mutex_release_function_set(trace_release);
+void execute_post(void* /*arguments*/)
+{
+ printf("POST executed\n");
}
-static void trace_close()
+void deregister_client(void)
{
- mbed_cellular_trace::mutex_wait_function_set(NULL);
- mbed_cellular_trace::mutex_release_function_set(NULL);
-
- mbed_trace_free();
+ printf("Unregistering and disconnecting from the network.\n");
+ cloud_client->close();
}
-#endif // #if MBED_CONF_MBED_TRACE_ENABLE
-Thread dot_thread(osPriorityNormal, 512);
-
-void print_function(const char *format, ...)
+void deregister(void* /*arguments*/)
{
- trace_mutex.lock();
- va_list arglist;
- va_start( arglist, format );
- vprintf(format, arglist);
- va_end( arglist );
- trace_mutex.unlock();
+ printf("POST deregister executed\n");
+ m2m_deregister_res->send_delayed_post_response();
+
+ deregister_client();
}
-void dot_event()
+void client_registered(void)
+{
+ printf("Client registered.\n");
+ print_client_ids();
+}
+
+void client_unregistered(void)
{
- while (true) {
- ThisThread::sleep_for(4000);
- if (iface && iface->get_connection_status() == NSAPI_STATUS_GLOBAL_UP) {
- break;
- } else {
- trace_mutex.lock();
- printf(".");
- fflush(stdout);
- trace_mutex.unlock();
- }
- }
+ printf("Client unregistered.\n");
+ (void) network->disconnect();
+ cloud_client_running = false;
+}
+
+void factory_reset(void*)
+{
+ printf("POST factory reset executed\n");
+ m2m_factory_reset_res->send_delayed_post_response();
+
+ kcm_factory_reset();
}
-/**
- * Connects to the Cellular Network
- */
-nsapi_error_t do_connect()
+void client_error(int err)
{
- nsapi_error_t retcode = NSAPI_ERROR_OK;
- uint8_t retry_counter = 0;
+ printf("client_error(%d) -> %s\n", err, cloud_client->error_description());
+}
- while (iface->get_connection_status() != NSAPI_STATUS_GLOBAL_UP) {
- retcode = iface->connect();
- if (retcode == NSAPI_ERROR_AUTH_FAILURE) {
- print_function("\n\nAuthentication Failure. Exiting application\n");
- } else if (retcode == NSAPI_ERROR_OK) {
- print_function("\n\nConnection Established.\n");
- } else if (retry_counter > RETRY_COUNT) {
- print_function("\n\nFatal connection failure: %d\n", retcode);
- } else {
- print_function("\n\nCouldn't connect: %d, will retry\n", retcode);
- retry_counter++;
- continue;
- }
- break;
- }
- return retcode;
+void update_progress(uint32_t progress, uint32_t total)
+{
+ uint8_t percent = (uint8_t)((uint64_t)progress * 100 / total);
+ printf("Update progress = %" PRIu8 "%%\n", percent);
}
-/**
- * Opens:
- * - UDP or TCP socket with the given echo server and performs an echo
- * transaction retrieving current.
- * - Cellular Non-IP socket for which the data delivery path is decided
- * by network's control plane CIoT optimisation setup, for the given APN.
- */
-nsapi_error_t test_send_recv()
+int main(void)
{
- nsapi_size_or_error_t retcode;
-#if MBED_CONF_APP_SOCK_TYPE == TCP
- TCPSocket sock;
-#elif MBED_CONF_APP_SOCK_TYPE == UDP
- UDPSocket sock;
-#elif MBED_CONF_APP_SOCK_TYPE == NONIP
- CellularNonIPSocket sock;
-#endif
+ int status;
-#if MBED_CONF_APP_SOCK_TYPE == NONIP
- retcode = sock.open((CellularContext*)iface);
-#else
- retcode = sock.open(iface);
-#endif
+ status = mbed_trace_init();
+ if (status != 0) {
+ printf("mbed_trace_init() failed with %d\n", status);
+ return -1;
+ }
+
+ BG96_Modem_PowerON();
- if (retcode != NSAPI_ERROR_OK) {
-#if MBED_CONF_APP_SOCK_TYPE == TCP
- print_function("TCPSocket.open() fails, code: %d\n", retcode);
-#elif MBED_CONF_APP_SOCK_TYPE == UDP
- print_function("UDPSocket.open() fails, code: %d\n", retcode);
-#elif MBED_CONF_APP_SOCK_TYPE == NONIP
- print_function("CellularNonIPSocket.open() fails, code: %d\n", retcode);
-#endif
+ // Mount default kvstore
+ printf("Application ready\n");
+ status = kv_init_storage_config();
+ if (status != MBED_SUCCESS) {
+ printf("kv_init_storage_config() - failed, status %d\n", status);
return -1;
}
- int n = 0;
- const char *echo_string = "TEST";
- char recv_buf[4];
-
- sock.set_timeout(15000);
+ // Connect with NetworkInterface
+ printf("Connect to network\n");
+ network = NetworkInterface::get_default_instance();
+ if (network == NULL) {
+ printf("Failed to get default NetworkInterface\n");
+ return -1;
+ }
+ status = network->connect();
+ if (status != NSAPI_ERROR_OK) {
+ printf("NetworkInterface failed to connect with %d\n", status);
+ return -1;
+ }
+ status = network->get_ip_address(&sa);
+ if (status!=0) {
+ printf("get_ip_address failed with %d\n", status);
+ return -2;
+ }
+ printf("Network initialized, connected with IP %s\n\n", sa.get_ip_address());
-#if MBED_CONF_APP_SOCK_TYPE == NONIP
- retcode = sock.send((void*) echo_string, strlen(echo_string));
- if (retcode < 0) {
- print_function("CellularNonIPSocket.send() fails, code: %d\n", retcode);
+ // Run developer flow
+ printf("Start developer flow\n");
+ status = fcc_init();
+ if (status != FCC_STATUS_SUCCESS) {
+ printf("fcc_init() failed with %d\n", status);
return -1;
- } else {
- print_function("CellularNonIPSocket: Sent %d Bytes\n", retcode);
}
- n = sock.recv((void*) recv_buf, sizeof(recv_buf));
-
-#else
+ // Inject hardcoded entropy for the device. Suitable only for demo devices.
+ (void) fcc_entropy_set(MBED_CLOUD_DEV_ENTROPY, sizeof(MBED_CLOUD_DEV_ENTROPY));
+ status = fcc_developer_flow();
+ if (status != FCC_STATUS_SUCCESS && status != FCC_STATUS_KCM_FILE_EXIST_ERROR && status != FCC_STATUS_CA_ERROR) {
+ printf("fcc_developer_flow() failed with %d\n", status);
+ return -1;
+ }
- SocketAddress sock_addr;
- retcode = iface->gethostbyname(host_name, &sock_addr);
- if (retcode != NSAPI_ERROR_OK) {
- print_function("Couldn't resolve remote host: %s, code: %d\n", host_name, retcode);
+ printf("Create resources\n");
+ M2MObjectList m2m_obj_list;
+
+ // GET resource 3200/0/5501
+ // PUT also allowed for resetting the resource
+ m2m_get_res = M2MInterfaceFactory::create_resource(m2m_obj_list, 3200, 0, 5501, M2MResourceInstance::INTEGER, M2MBase::GET_PUT_ALLOWED);
+ if (m2m_get_res->set_value(0) != true) {
+ printf("m2m_get_res->set_value() failed\n");
+ return -1;
+ }
+ if (m2m_get_res->set_value_updated_function(get_res_update) != true) {
+ printf("m2m_get_res->set_value_updated_function() failed\n");
return -1;
}
- sock_addr.set_port(port);
-
-#if MBED_CONF_APP_SOCK_TYPE == TCP
- retcode = sock.connect(sock_addr);
- if (retcode < 0) {
- print_function("TCPSocket.connect() fails, code: %d\n", retcode);
+ // PUT resource 3201/0/5853
+ m2m_put_res = M2MInterfaceFactory::create_resource(m2m_obj_list, 3201, 0, 5853, M2MResourceInstance::INTEGER, M2MBase::GET_PUT_ALLOWED);
+ if (m2m_put_res->set_value(0) != true) {
+ printf("m2m_put_res->set_value() failed\n");
+ return -1;
+ }
+ if (m2m_put_res->set_value_updated_function(put_res_update) != true) {
+ printf("m2m_put_res->set_value_updated_function() failed\n");
return -1;
- } else {
- print_function("TCP: connected with %s server\n", host_name);
+ }
+
+ // POST resource 3201/0/5850
+ m2m_post_res = M2MInterfaceFactory::create_resource(m2m_obj_list, 3201, 0, 5850, M2MResourceInstance::INTEGER, M2MBase::POST_ALLOWED);
+ if (m2m_post_res->set_execute_function(execute_post) != true) {
+ printf("m2m_post_res->set_execute_function() failed\n");
+ return -1;
}
- retcode = sock.send((void*) echo_string, strlen(echo_string));
- if (retcode < 0) {
- print_function("TCPSocket.send() fails, code: %d\n", retcode);
+
+ // POST resource 5000/0/1 to trigger deregister.
+ m2m_deregister_res = M2MInterfaceFactory::create_resource(m2m_obj_list, 5000, 0, 1, M2MResourceInstance::INTEGER, M2MBase::POST_ALLOWED);
+
+ // Use delayed response
+ m2m_deregister_res->set_delayed_response(true);
+
+ if (m2m_deregister_res->set_execute_function(deregister) != true) {
+ printf("m2m_post_res->set_execute_function() failed\n");
return -1;
- } else {
- print_function("TCP: Sent %d Bytes to %s\n", retcode, host_name);
}
- n = sock.recv((void*) recv_buf, sizeof(recv_buf));
-#else
-
- retcode = sock.sendto(sock_addr, (void*) echo_string, strlen(echo_string));
- if (retcode < 0) {
- print_function("UDPSocket.sendto() fails, code: %d\n", retcode);
- return -1;
- } else {
- print_function("UDP: Sent %d Bytes to %s\n", retcode, host_name);
+ // optional Device resource for running factory reset for the device. Path of this resource will be: 3/0/6.
+ m2m_factory_reset_res = M2MInterfaceFactory::create_device()->create_resource(M2MDevice::FactoryReset);
+ if (m2m_factory_reset_res) {
+ m2m_factory_reset_res->set_execute_function(factory_reset);
}
- n = sock.recvfrom(&sock_addr, (void*) recv_buf, sizeof(recv_buf));
-#endif
-#endif
+ printf("Register Pelion Device Management Client\n\n");
- sock.close();
+#ifdef MBED_CLOUD_CLIENT_SUPPORT_UPDATE
+ cloud_client = new MbedCloudClient(client_registered, client_unregistered, client_error, NULL, update_progress);
+#else
+ cloud_client = new MbedCloudClient(client_registered, client_unregistered, client_error);
+#endif // MBED_CLOUD_CLIENT_SUPPORT_UPDATE
+
+ cloud_client->add_objects(m2m_obj_list);
+ cloud_client->setup(network); // cloud_client->setup(NULL); -- https://jira.arm.com/browse/IOTCLT-3114
+
+ t.start(callback(&queue, &EventQueue::dispatch_forever));
+ queue.call_every(5000, value_increment);
- if (n > 0) {
- print_function("Received from echo server %d Bytes\n", n);
- return 0;
+ while(cloud_client_running) {
+ int in_char = getchar();
+ if (in_char == 'i') {
+ print_client_ids(); // When 'i' is pressed, print endpoint info
+ continue;
+ } else if (in_char == 'r') {
+ (void) fcc_storage_delete(); // When 'r' is pressed, erase storage and reboot the board.
+ printf("Storage erased, rebooting the device.\n\n");
+ ThisThread::sleep_for(1*1000);
+ NVIC_SystemReset();
+ } else if (in_char > 0 && in_char != 0x03) { // Ctrl+C is 0x03 in Mbed OS and Linux returns negative number
+ value_increment(); // Simulate button press
+ continue;
+ }
+ deregister_client();
+ break;
}
-
- return -1;
+ return 0;
}
-int main()
-{
- print_function("\n\nmbed-os-example-cellular\n");
- print_function("\n\nBuilt: %s, %s\n", __DATE__, __TIME__);
-#ifdef MBED_CONF_NSAPI_DEFAULT_CELLULAR_PLMN
- print_function("\n\n[MAIN], plmn: %s\n", (MBED_CONF_NSAPI_DEFAULT_CELLULAR_PLMN ? MBED_CONF_NSAPI_DEFAULT_CELLULAR_PLMN : "NULL"));
-#endif
-
- print_function("Establishing connection\n");
-
- BG96_Modem_PowerON();
-
-#if MBED_CONF_MBED_TRACE_ENABLE
- trace_open();
-#else
- dot_thread.start(dot_event);
-#endif // #if MBED_CONF_MBED_TRACE_ENABLE
-
-#if MBED_CONF_APP_SOCK_TYPE == NONIP
- iface = CellularContext::get_default_nonip_instance();
-#else
- iface = CellularContext::get_default_instance();
-#endif
-
- MBED_ASSERT(iface);
-
- // sim pin, apn, credentials and possible plmn are taken automatically from json when using NetworkInterface::set_default_parameters()
- iface->set_default_parameters();
-
- nsapi_error_t retcode = NSAPI_ERROR_NO_CONNECTION;
-
- /* Attempt to connect to a cellular network */
- if (do_connect() == NSAPI_ERROR_OK) {
- retcode = test_send_recv();
- }
-
- if (iface->disconnect() != NSAPI_ERROR_OK) {
- print_function("\n\n disconnect failed.\n\n");
- }
-
- if (retcode == NSAPI_ERROR_OK) {
- print_function("\n\nSuccess. Exiting \n\n");
- } else {
- print_function("\n\nFailure. Exiting \n\n");
- }
-
-#if MBED_CONF_MBED_TRACE_ENABLE
- trace_close();
-#else
- dot_thread.terminate();
-#endif // #if MBED_CONF_MBED_TRACE_ENABLE
-
- return 0;
-}
-// EOF
+#endif /* MBED_TEST_MODE */
--- a/mbed_app.json Fri Feb 21 19:20:41 2020 +0000
+++ b/mbed_app.json Fri Feb 21 19:27:19 2020 +0000
@@ -1,42 +1,461 @@
{
- "config": {
- "sock-type": "TCP",
- "echo-server-hostname": {
- "help": "Echo server host name.",
- "value": "\"echo.mbedcloudtesting.com\""
- },
- "echo-server-port": {
- "help": "Echo server port number.",
- "value": 7
- },
- "trace-level": {
- "help": "Options are TRACE_LEVEL_ERROR,TRACE_LEVEL_WARN,TRACE_LEVEL_INFO,TRACE_LEVEL_DEBUG",
- "macro_name": "MBED_TRACE_MAX_LEVEL",
- "value": "TRACE_LEVEL_INFO"
- }
- },
+ "macros": [
+ "MBED_TRACE_MAX_LEVEL=TRACE_LEVEL_INFO",
+ "MBED_CLIENT_USER_CONFIG_FILE=\"mbed_cloud_client_user_config.h\"",
+ "MBED_CLOUD_CLIENT_USER_CONFIG_FILE=\"mbed_cloud_client_user_config.h\"",
+ "ARM_UC_USE_PAL_BLOCKDEVICE=1",
+ "PAL_PLATFORM_DEFINED_CONFIGURATION=\"mbedOS_SST.h\"",
+ "PAL_USER_DEFINED_CONFIGURATION=\"mbedOS_SST.h\""
+ ],
"target_overrides": {
"*": {
- "target.network-default-interface-type": "CELLULAR",
- "mbed-trace.enable": true,
- "lwip.ipv4-enabled": true,
- "lwip.ipv6-enabled": false,
- "lwip.ethernet-enabled": false,
- "lwip.ppp-enabled": false,
- "lwip.tcp-enabled": true,
- "platform.stdio-convert-newlines": true,
- "platform.stdio-baud-rate": 115200,
- "platform.default-serial-baud-rate": 115200,
- "platform.stdio-buffered-serial": true,
- "cellular.debug-at": false,
- "nsapi.default-cellular-plmn": 0,
- "nsapi.default-cellular-sim-pin": "\"1234\"",
- "nsapi.default-cellular-apn": "\"m2m-catm1.default.lguplus.co.kr\"",
- "nsapi.default-cellular-username": 0,
- "nsapi.default-cellular-password": 0,
- "QUECTEL_BG96.tx": "D1",
- "QUECTEL_BG96.rx": "D0",
- "QUECTEL_BG96.provide-default": true
+ "target.features_add" : ["BOOTLOADER", "STORAGE"],
+ "platform.stdio-baud-rate" : 115200,
+ "platform.stdio-convert-newlines" : true,
+ "platform.stdio-buffered-serial" : true,
+ "platform.stdio-flush-at-exit" : true,
+ "rtos.main-thread-stack-size" : 5120,
+ "update-client.storage-locations" : 1,
+ "mbed-trace.enable" : null,
+ "events.shared-stacksize" : 2048,
+ "nsapi.default-wifi-security" : "WPA_WPA2",
+ "nsapi.default-wifi-ssid" : "\"SSID\"",
+ "nsapi.default-wifi-password" : "\"PASSWORD\"",
+ "nsapi.default-cellular-apn" : "\"APN\"",
+ "nsapi.default-cellular-sim-pin" : null,
+ "nsapi.default-cellular-username" : null,
+ "nsapi.default-cellular-password" : null
+ },
+ "Freescale": {
+ "lwip.mem-size" : 12500
+ },
+ "STM_EMAC": {
+ "lwip.pbuf-pool-size" : 16,
+ "lwip.mem-size" : 12500
+ },
+ "K64F": {
+ "target.macros_add" : ["MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS.h\""],
+ "target.network-default-interface-type" : "ETHERNET",
+ "target.bootloader_img" : "bootloader/mbed-bootloader-k64f-internal_flash-no_rot-v4.1.0.bin",
+ "target.header_offset" : "0x8000",
+ "target.app_offset" : "0x8400",
+ "target.restrict_size" : "0x74000",
+ "update-client.bootloader-details" : "0x4A6C",
+ "update-client.application-details" : "(32*1024)",
+ "update-client.storage-address" : "(MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_BASE_ADDRESS+MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_SIZE)",
+ "update-client.storage-size" : "(512*1024-MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_SIZE)",
+ "update-client.storage-locations" : 1,
+ "update-client.storage-page" : 8,
+ "mbed-cloud-client.update-storage" : "ARM_UCP_FLASHIAP",
+ "storage_tdb_internal.internal_base_address": "(512*1024)",
+ "storage_tdb_internal.internal_size" : "(32*1024)",
+ "storage.storage_type" : "TDB_INTERNAL",
+ "run-ci" : 2
+ },
+ "K66F": {
+ "target.macros_add" : ["MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS.h\""],
+ "target.network-default-interface-type" : "ETHERNET",
+ "target.bootloader_img" : "bootloader/mbed-bootloader-k66f-internal_flash-no_rot-v4.1.0.bin",
+ "target.header_offset" : "0x8000",
+ "target.app_offset" : "0x8400",
+ "update-client.bootloader-details" : "0x4D58",
+ "update-client.application-details" : "(32*1024)",
+ "update-client.storage-address" : "(MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_BASE_ADDRESS+MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_SIZE)",
+ "update-client.storage-size" : "(1024*1024-MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_SIZE)",
+ "update-client.storage-page" : 8,
+ "mbed-cloud-client.update-storage" : "ARM_UCP_FLASHIAP",
+ "storage_tdb_internal.internal_base_address": "(1024*1024)",
+ "storage_tdb_internal.internal_size" : "(96*1024)",
+ "storage.storage_type" : "TDB_INTERNAL",
+ "run-ci" : 2
+ },
+ "NUCLEO_F429ZI": {
+ "target.macros_add" : ["MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS.h\""],
+ "target.network-default-interface-type" : "ETHERNET",
+ "target.bootloader_img" : "bootloader/mbed-bootloader-nucleo_f429zi-internal_flash-no_rot-v4.1.0.bin",
+ "target.header_offset" : "0x8000",
+ "target.app_offset" : "0x8400",
+ "update-client.bootloader-details" : "0x080078CC",
+ "update-client.application-details" : "(MBED_ROM_START + MBED_BOOTLOADER_SIZE)",
+ "update-client.storage-address" : "(MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_BASE_ADDRESS+MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_SIZE)",
+ "update-client.storage-size" : "(1024*1024-MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_SIZE)",
+ "update-client.storage-page" : 1,
+ "mbed-cloud-client.update-storage" : "ARM_UCP_FLASHIAP",
+ "storage_tdb_internal.internal_base_address": "(MBED_ROM_START+1024*1024)",
+ "storage_tdb_internal.internal_size" : "(128*1024)",
+ "storage.storage_type" : "TDB_INTERNAL"
+ },
+ "UBLOX_EVK_ODIN_W2": {
+ "target.macros_add" : ["MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS.h\""],
+ "target.network-default-interface-type" : "WIFI",
+ "target.bootloader_img" : "bootloader/mbed-bootloader-ublox_evk_odin_w2-block_device-kvstore-v4.1.0.bin",
+ "target.header_offset" : "0x10000",
+ "target.app_offset" : "0x10400",
+ "target.components_add" : ["SD"],
+ "update-client.bootloader-details" : "0x08007300",
+ "update-client.application-details" : "(0x08000000+64*1024)",
+ "update-client.storage-address" : "(1024*1024*64)",
+ "update-client.storage-size" : "((MBED_ROM_START + MBED_ROM_SIZE - APPLICATION_ADDR) * MBED_CONF_UPDATE_CLIENT_STORAGE_LOCATIONS)",
+ "mbed-cloud-client.update-storage" : "ARM_UCP_FLASHIAP_BLOCKDEVICE",
+ "storage_filesystem.internal_base_address" : "(0x08000000+32*1024)",
+ "storage_filesystem.rbp_internal_size" : "(32*1024)",
+ "storage_filesystem.external_base_address" : "(0x0)",
+ "storage_filesystem.external_size" : "(1024*1024*64)",
+ "storage.storage_type" : "FILESYSTEM",
+ "storage_filesystem.filesystem" : "LITTLE",
+ "storage_filesystem.blockdevice" : "SD",
+ "target.lse_available" : 0,
+ "target.macros_remove" : ["MBEDTLS_CONFIG_HW_SUPPORT"]
+ },
+ "UBLOX_C030_U201": {
+ "target.macros_add" : ["MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS.h\""],
+ "target.network-default-interface-type" : "CELLULAR",
+ "target.bootloader_img" : "bootloader/mbed-bootloader-ublox_c030_u201-block_device-kvstore-v4.0.3.bin",
+ "target.header_offset" : "0x10000",
+ "target.app_offset" : "0x10400",
+ "target.components_add" : ["SD"],
+ "update-client.bootloader-details" : "0x08006FB8",
+ "update-client.application-details" : "(0x08000000+64*1024)",
+ "update-client.storage-address" : "(1024*1024*64)",
+ "update-client.storage-size" : "((MBED_ROM_START + MBED_ROM_SIZE - APPLICATION_ADDR) * MBED_CONF_UPDATE_CLIENT_STORAGE_LOCATIONS)",
+ "mbed-cloud-client.update-storage" : "ARM_UCP_FLASHIAP_BLOCKDEVICE",
+ "storage_filesystem.internal_base_address" : "(0x08000000+32*1024)",
+ "storage_filesystem.rbp_internal_size" : "(32*1024)",
+ "storage_filesystem.external_base_address" : "(0x0)",
+ "storage_filesystem.external_size" : "(1024*1024*64)",
+ "storage.storage_type" : "FILESYSTEM",
+ "storage_filesystem.filesystem" : "LITTLE",
+ "storage_filesystem.blockdevice" : "SD",
+ "target.lse_available" : 0,
+ "target.macros_remove" : ["MBEDTLS_CONFIG_HW_SUPPORT"],
+ "platform.default-serial-baud-rate" : 115200
+ },
+ "UBLOX_C030_R412M": {
+ "target.macros_add" : ["MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS.h\""],
+ "target.network-default-interface-type" : "CELLULAR",
+ "target.bootloader_img" : "bootloader/mbed-bootloader-ublox_c030_r412m-block_device-kvstore-v4.0.3.bin",
+ "target.header_offset" : "0x10000",
+ "target.app_offset" : "0x10400",
+ "target.components_add" : ["SD", "FLASHIAP"],
+ "update-client.bootloader-details" : "0x08006F1C",
+ "update-client.application-details" : "(0x08000000+64*1024)",
+ "update-client.storage-address" : "(1024*1024*64)",
+ "update-client.storage-size" : "((MBED_ROM_START + MBED_ROM_SIZE - APPLICATION_ADDR) * MBED_CONF_UPDATE_CLIENT_STORAGE_LOCATIONS)",
+ "mbed-cloud-client.update-storage" : "ARM_UCP_FLASHIAP_BLOCKDEVICE",
+ "storage_filesystem.internal_base_address" : "(0x08000000+32*1024)",
+ "storage_filesystem.rbp_internal_size" : "(32*1024)",
+ "storage_filesystem.external_base_address" : "(0x0)",
+ "storage_filesystem.external_size" : "(1024*1024*64)",
+ "storage.storage_type" : "FILESYSTEM",
+ "storage_filesystem.filesystem" : "LITTLE",
+ "storage_filesystem.blockdevice" : "SD",
+ "target.macros_remove" : ["MBEDTLS_CONFIG_HW_SUPPORT"],
+ "platform.default-serial-baud-rate" : 115200
+ },
+ "NUCLEO_F411RE": {
+ "target.extra_labels_add" : ["PSA"],
+ "target.macros_add" : ["MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS_SW_TRNG_PSA.h\"", "MBEDTLS_PSA_CRYPTO_C", "MBEDTLS_ENTROPY_NV_SEED", "PAL_USE_HW_TRNG=0"],
+ "target.network-default-interface-type" : "WIFI",
+ "target.bootloader_img" : "bootloader/mbed-bootloader-nucleo_f411re-block_device-kvstore-v4.1.0.bin",
+ "target.header_offset" : "0x10000",
+ "target.app_offset" : "0x10400",
+ "target.components_add" : ["SD"],
+ "update-client.bootloader-details" : "(MBED_ROM_START + 30*1024)",
+ "update-client.application-details" : "(MBED_ROM_START + MBED_BOOTLOADER_SIZE + MBED_CONF_STORAGE_FILESYSTEM_RBP_INTERNAL_SIZE)",
+ "update-client.storage-address" : "(MBED_CONF_STORAGE_FILESYSTEM_EXTERNAL_SIZE)",
+ "update-client.storage-size" : "((MBED_ROM_START + MBED_ROM_SIZE - APPLICATION_ADDR) * MBED_CONF_UPDATE_CLIENT_STORAGE_LOCATIONS)",
+ "mbed-cloud-client.update-storage" : "ARM_UCP_FLASHIAP_BLOCKDEVICE",
+ "storage_filesystem.internal_base_address" : "(MBED_ROM_START + MBED_BOOTLOADER_SIZE)",
+ "storage_filesystem.rbp_internal_size" : "(32*1024)",
+ "storage_filesystem.external_base_address" : "(0x0)",
+ "storage_filesystem.external_size" : "(1024*1024*64)",
+ "storage.storage_type" : "FILESYSTEM",
+ "storage_filesystem.filesystem" : "LITTLE",
+ "storage_filesystem.blockdevice" : "SD",
+ "target.macros_remove" : ["MBEDTLS_CONFIG_HW_SUPPORT"],
+ "sd.SPI_MOSI" : "PC_3",
+ "sd.SPI_MISO" : "PC_2",
+ "sd.SPI_CLK" : "PC_7",
+ "sd.SPI_CS" : "PB_9",
+ "esp8266.rx" : "PB_7",
+ "esp8266.tx" : "PA_15",
+ "esp8266.rst" : "PA_7",
+ "esp8266.rts" : "PA_12",
+ "esp8266.cts" : "PA_11",
+ "esp8266.provide-default" : true
+ },
+ "NUMAKER_PFM_M487": {
+ "target.extra_labels_add" : ["PSA"],
+ "target.network-default-interface-type" : "ETHERNET",
+ "target.bootloader_img" : "bootloader/mbed-bootloader-m487-block_device-kvstore-v4.1.0.bin",
+ "bootloader-size" : "(64*1024)",
+ "target.header_offset" : "0x12000",
+ "target.app_offset" : "0x12400",
+ "target.components_add" : ["NUSD"],
+ "nusd.provide-default-blockdevice" : true,
+ "nusd.provide-kvstore-other-blockdevice" : true,
+ "update-client.bootloader-details" : "0x0",
+ "update-client.application-details" : "0x12000",
+ "update-client.storage-address" : "(1024*1024*64)",
+ "update-client.storage-size" : "((MBED_ROM_START + MBED_ROM_SIZE - APPLICATION_ADDR) * MBED_CONF_UPDATE_CLIENT_STORAGE_LOCATIONS)",
+ "update-client.storage-locations" : 1,
+ "mbed-cloud-client.update-storage" : "ARM_UCP_FLASHIAP_BLOCKDEVICE",
+ "storage.storage_type" : "FILESYSTEM",
+ "storage_filesystem.filesystem" : "LITTLE",
+ "storage_filesystem.blockdevice" : "other",
+ "storage_filesystem.internal_base_address" : "(MBED_ROM_START + MBED_BOOTLOADER_SIZE)",
+ "storage_filesystem.rbp_internal_size" : "(2*4*1024)",
+ "storage_filesystem.external_base_address" : "(0x0)",
+ "storage_filesystem.external_size" : "(1024*1024*64)",
+ "target.macros_add" : ["MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS_SW_TRNG_PSA.h\"", "MBEDTLS_PSA_CRYPTO_C", "MBEDTLS_ENTROPY_NV_SEED", "PAL_USE_HW_TRNG=0"]
+ },
+ "NUMAKER_IOT_M487": {
+ "target.extra_labels_add" : ["PSA"],
+ "target.network-default-interface-type" : "WIFI",
+ "target.bootloader_img" : "bootloader/mbed-bootloader-m487_iot-block_device-kvstore-v4.1.0.bin",
+ "bootloader-size" : "(64*1024)",
+ "target.header_offset" : "0x12000",
+ "target.app_offset" : "0x12400",
+ "target.components_add" : ["NUSD"],
+ "nusd.provide-default-blockdevice" : true,
+ "nusd.provide-kvstore-other-blockdevice" : true,
+ "update-client.bootloader-details" : "0x0",
+ "update-client.application-details" : "0x12000",
+ "update-client.storage-address" : "(1024*1024*64)",
+ "update-client.storage-size" : "((MBED_ROM_START + MBED_ROM_SIZE - APPLICATION_ADDR) * MBED_CONF_UPDATE_CLIENT_STORAGE_LOCATIONS)",
+ "update-client.storage-locations" : 1,
+ "mbed-cloud-client.update-storage" : "ARM_UCP_FLASHIAP_BLOCKDEVICE",
+ "storage.storage_type" : "FILESYSTEM",
+ "storage_filesystem.filesystem" : "LITTLE",
+ "storage_filesystem.blockdevice" : "other",
+ "storage_filesystem.internal_base_address" : "(MBED_ROM_START + MBED_BOOTLOADER_SIZE)",
+ "storage_filesystem.rbp_internal_size" : "(2*4*1024)",
+ "storage_filesystem.external_base_address" : "(0x0)",
+ "storage_filesystem.external_size" : "(1024*1024*64)",
+ "esp8266.tx" : "PH_8",
+ "esp8266.rx" : "PH_9",
+ "esp8266.rts" : "A2",
+ "esp8266.cts" : "A3",
+ "esp8266.rst" : "PH_3",
+ "esp8266.provide-default" : true,
+ "target.macros_add" : ["MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS_SW_TRNG_PSA.h\"", "MBEDTLS_PSA_CRYPTO_C", "MBEDTLS_ENTROPY_NV_SEED", "PAL_USE_HW_TRNG=0", "ESP8266_SEND_TIMEOUT=8000"]
+ },
+ "DISCO_L475VG_IOT01A": {
+ "target.macros_add" : ["MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS.h\""],
+ "target.network-default-interface-type" : "CELLULAR",
+ "target.bootloader_img" : "bootloader/mbed-bootloader-disco_l475vg_iot01a-external_kvstore-qspif-v4.1.1.bin",
+ "target.header_offset" : "0x11000",
+ "target.app_offset" : "0x11400",
+ "target.components_add" : ["QSPIF"],
+ "bootloader-size" : "(36*1024)",
+ "mbed-client-pal.pal-max-frag-len" : 1,
+ "mbed-client.sn-coap-max-blockwise-payload-size": 256,
+ "mbed-cloud-client.update-storage" : "ARM_UCP_FLASHIAP_BLOCKDEVICE",
+ "storage.storage_type" : "FILESYSTEM",
+ "storage_filesystem.filesystem" : "LITTLE",
+ "storage_filesystem.blockdevice" : "QSPIF",
+ "storage_filesystem.external_size" : "(1024 * 1024)",
+ "storage_filesystem.external_base_address" : "(0)",
+ "storage_filesystem.rbp_internal_size" : "(32 * 1024)",
+ "storage_filesystem.internal_base_address" : "(MBED_ROM_START + MBED_BOOTLOADER_SIZE)",
+ "update-client.application-details" : "(MBED_CONF_STORAGE_FILESYSTEM_INTERNAL_BASE_ADDRESS + MBED_CONF_STORAGE_FILESYSTEM_RBP_INTERNAL_SIZE)",
+ "update-client.bootloader-details" : "0x800882c",
+ "update-client.firmware-header-version" : "2",
+ "update-client.storage-address" : "(MBED_CONF_STORAGE_FILESYSTEM_EXTERNAL_BASE_ADDRESS + MBED_CONF_STORAGE_FILESYSTEM_EXTERNAL_SIZE)",
+ "update-client.storage-locations" : 1,
+ "update-client.storage-size" : "((MBED_ROM_START + MBED_ROM_SIZE - APPLICATION_ADDR) * MBED_CONF_UPDATE_CLIENT_STORAGE_LOCATIONS)",
+ "run-ci" : 2,
+ "lwip.ipv4-enabled" : true,
+ "lwip.ipv6-enabled" : false,
+ "lwip.ethernet-enabled" : false,
+ "lwip.ppp-enabled" : false,
+ "lwip.tcp-enabled" : true,
+ "cellular.debug-at" : false,
+ "nsapi.default-cellular-plmn" : 0,
+ "nsapi.default-cellular-sim-pin" : "\"1234\"",
+ "nsapi.default-cellular-apn" : "\"m2m-catm1.default.lguplus.co.kr\"",
+ "nsapi.default-cellular-username" : 0,
+ "nsapi.default-cellular-password" : 0,
+ "QUECTEL_BG96.tx" : "D1",
+ "QUECTEL_BG96.rx" : "D0",
+ "QUECTEL_BG96.provide-default" : true
+ },
+ "EP_AGORA": {
+ "target.features_remove" : ["BLE", "CRYPTOCELL310"],
+ "target.macros_add" : ["MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS.h\""],
+ "target.bootloader_img" : "bootloader/mbed-bootloader-ep_agora-external_kvstore-spif-v4.1.2.bin",
+ "target.header_offset" : "0x10000",
+ "target.app_offset" : "0x10400",
+ "target.components_remove" : ["QSPIF"],
+ "target.components_add" : ["SPIF"],
+ "target.macros_remove" : ["MBEDTLS_CONFIG_HW_SUPPORT"],
+ "update-client.bootloader-details" : "0x7394",
+ "update-client.application-details" : "(MBED_CONF_STORAGE_FILESYSTEM_INTERNAL_BASE_ADDRESS + MBED_CONF_STORAGE_FILESYSTEM_RBP_INTERNAL_SIZE)",
+ "update-client.storage-address" : "(MBED_CONF_STORAGE_FILESYSTEM_EXTERNAL_BASE_ADDRESS + MBED_CONF_STORAGE_FILESYSTEM_EXTERNAL_SIZE)",
+ "update-client.storage-size" : "((MBED_ROM_START + MBED_ROM_SIZE - APPLICATION_ADDR) * MBED_CONF_UPDATE_CLIENT_STORAGE_LOCATIONS)",
+ "update-client.firmware-header-version" : "2",
+ "mbed-cloud-client.update-storage" : "ARM_UCP_FLASHIAP_BLOCKDEVICE",
+ "storage_filesystem.internal_base_address" : "(MBED_ROM_START + MBED_BOOTLOADER_SIZE)",
+ "storage_filesystem.rbp_internal_size" : "(32*1024)",
+ "storage.storage_type" : "FILESYSTEM",
+ "storage_filesystem.filesystem" : "LITTLE",
+ "storage_filesystem.blockdevice" : "SPIF",
+ "storage_filesystem.external_base_address" : "(0x0)",
+ "storage_filesystem.external_size" : "(1024*1024*1)",
+ "platform.default-serial-baud-rate" : 230400,
+ "platform.stdio-baud-rate" : 230400,
+ "drivers.uart-serial-rxbuf-size" : 1024,
+ "drivers.uart-serial-txbuf-size" : 1024,
+ "lwip.ipv4-enabled" : true,
+ "lwip.ipv6-enabled" : true,
+ "lwip.ppp-enabled" : true,
+ "lwip.tcp-enabled" : true,
+ "lwip.ethernet-enabled" : false,
+ "lwip.mem-size" : 22000,
+ "nsapi.dns-response-wait-time" : 30000
+ },
+ "NUCLEO_H743ZI2": {
+ "target.macros_add" : ["MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS.h\""],
+ "target.network-default-interface-type" : "ETHERNET",
+ "target.bootloader_img" : "bootloader/mbed-bootloader-nucleo-h743zi2-internal-flash-no-rot-4.1.1.bin",
+ "target.header_offset" : "0x40000",
+ "target.app_offset" : "0x40400",
+ "target.restrict_size" : "0xC0000",
+ "bootloader-size" : "(128*1024)",
+ "mbed-cloud-client.update-storage" : "ARM_UCP_FLASHIAP",
+ "storage.storage_type" : "TDB_INTERNAL",
+ "storage_tdb_internal.internal_base_address": "(MBED_ROM_START + (1024*1024))",
+ "storage_tdb_internal.internal_size" : "(2*128*1024)",
+ "update-client.application-details" : "(MBED_ROM_START + MBED_BOOTLOADER_SIZE * 2)",
+ "update-client.bootloader-details" : "0x0800715c",
+ "update-client.firmware-header-version" : "2",
+ "update-client.storage-address" : "(MBED_ROM_START + ((8+2)*128*1024))",
+ "update-client.storage-locations" : 1,
+ "update-client.storage-size" : "(6*128*1024)"
+ },
+ "NUCLEO_L4R5ZI": {
+ "target.macros_add" : ["MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS.h\"", "MBED_APP_FLASH_BANK_SIZE=MBED_ROM_SIZE/2", "KVSTORE_SIZE=(32*1024)"],
+ "target.bootloader_img" : "bootloader/mbed-bootloader-nucleo_l4r5zi-internal_flash_no_rot-ca089bb.bin",
+ "target.header_offset" : "0x08000",
+ "target.app_offset" : "0x08400",
+ "mbed-cloud-client.update-storage" : "ARM_UCP_FLASHIAP",
+ "update-client.bootloader-details" : "0x08007cac",
+ "update-client.application-details" : "(32*1024)",
+ "update-client.storage-address" : "(MBED_ROM_START + MBED_APP_FLASH_BANK_SIZE + KVSTORE_SIZE)",
+ "update-client.storage-size" : "(MBED_APP_FLASH_BANK_SIZE - KVSTORE_SIZE)",
+ "update-client.storage-locations" : 1,
+ "update-client.storage-page" : 1,
+ "storage_tdb_internal.internal_base_address": "(MBED_ROM_START+1024*1024)",
+ "storage_tdb_internal.internal_size" : "KVSTORE_SIZE",
+ "storage.storage_type" : "TDB_INTERNAL",
+ "target.network-default-interface-type" : "WIFI",
+ "esp8266.provide-default" : true,
+ "esp8266.tx" : "D1",
+ "esp8266.rx" : "D0",
+ "esp8266.cts" : "D12",
+ "esp8266.rts" : "PB_1",
+ "esp8266.rst" : "D8"
+ },
+ "ARCH_MAX": {
+ "target.extra_labels_add" : ["PSA"],
+ "target.macros_add" : ["MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS.h\""],
+ "target.network-default-interface-type" : "ETHERNET",
+ "target.bootloader_img" : "bootloader/mbed-bootloader-arch_max-block_device-kvstore-v4.0.3.bin",
+ "target.header_offset" : "0x10000",
+ "target.app_offset" : "0x10400",
+ "update-client.bootloader-details" : "0x08006FB8",
+ "update-client.application-details" : "(0x08000000+64*1024)",
+ "update-client.storage-address" : "(1024*1024*64)",
+ "update-client.storage-size" : "((MBED_ROM_START + MBED_ROM_SIZE - APPLICATION_ADDR) * MBED_CONF_UPDATE_CLIENT_STORAGE_LOCATIONS)",
+ "mbed-cloud-client.update-storage" : "ARM_UCP_FLASHIAP_BLOCKDEVICE",
+ "storage_filesystem.internal_base_address" : "(0x08000000+32*1024)",
+ "storage_filesystem.rbp_internal_size" : "(32*1024)",
+ "storage_filesystem.external_base_address" : "(0x0)",
+ "storage_filesystem.external_size" : "(1024*1024*64)",
+ "storage.storage_type" : "FILESYSTEM",
+ "storage_filesystem.filesystem" : "LITTLE",
+ "storage_filesystem.blockdevice" : "SD",
+ "target.lse_available" : 0,
+ "target.macros_remove" : ["MBEDTLS_CONFIG_HW_SUPPORT"]
+ },
+ "RZ_A1H": {
+ "target.extra_labels_add" : ["PSA"],
+ "target.macros_add" : ["MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS_SW_TRNG_PSA.h\"", "MBEDTLS_PSA_CRYPTO_C", "MBEDTLS_ENTROPY_NV_SEED", "PAL_USE_HW_TRNG=0"],
+ "target.bootloader_supported" : true,
+ "target.network-default-interface-type" : "ETHERNET",
+ "target.bootloader_img" : "bootloader/mbed-bootloader-gr_peach-internal_flash-no_rot-v4.1.2.bin",
+ "target.header_offset" : "0x10000",
+ "target.app_offset" : "0x10400",
+ "bootloader-size" : "(64*1024)",
+ "update-client.bootloader-details" : "0x1800a660",
+ "update-client.application-details" : "(MBED_ROM_START + MBED_BOOTLOADER_SIZE)",
+ "update-client.storage-address" : "(MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_BASE_ADDRESS+MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_SIZE)",
+ "update-client.storage-size" : "(4*1024*1024-MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_SIZE)",
+ "update-client.storage-page" : 1,
+ "mbed-cloud-client.update-storage" : "ARM_UCP_FLASHIAP",
+ "storage_tdb_internal.internal_base_address": "(MBED_ROM_START+4*1024*1024)",
+ "storage_tdb_internal.internal_size" : "(2*24*1024)",
+ "storage.storage_type" : "TDB_INTERNAL"
+ },
+ "GR_LYCHEE": {
+ "target.macros_add" : ["MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS.h\""],
+ "target.bootloader_supported" : true,
+ "target.network-default-interface-type" : "WIFI",
+ "target.components_add" : ["WIFI_ESP32"],
+ "target.bootloader_img" : "bootloader/mbed-bootloader-gr_lychee-internal_flash-no_rot-v4.1.2.bin",
+ "target.header_offset" : "0x10000",
+ "target.app_offset" : "0x10400",
+ "bootloader-size" : "(64*1024)",
+ "update-client.bootloader-details" : "0x1800a468",
+ "update-client.application-details" : "(MBED_ROM_START + MBED_BOOTLOADER_SIZE)",
+ "update-client.storage-address" : "(MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_BASE_ADDRESS+MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_SIZE)",
+ "update-client.storage-size" : "(4*1024*1024-MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_SIZE)",
+ "update-client.storage-page" : 1,
+ "mbed-cloud-client.update-storage" : "ARM_UCP_FLASHIAP",
+ "storage_tdb_internal.internal_base_address": "(MBED_ROM_START+4*1024*1024)",
+ "storage_tdb_internal.internal_size" : "(2*24*1024)",
+ "storage.storage_type" : "TDB_INTERNAL"
+ },
+ "WIO_3G": {
+ "target.features_add" : ["LWIP", "STORAGE", "BOOTLOADER"],
+ "target.macros_add" : ["MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS.h\""],
+ "target.device_has_remove" : ["SERIAL_FC"],
+ "target.network-default-interface-type" : "CELLULAR",
+ "target.components_add" : ["FLASHIAP"],
+ "target.bootloader_img" : "bootloader/mbed-bootloader-wio_3g-internal_flash-no_rot-v4.1.2.bin",
+ "target.header_offset" : "0x8000",
+ "target.app_offset" : "0x8400",
+ "target.restrict_size" : "0xF4000",
+ "nsapi.default-cellular-plmn" : 0,
+ "cellular.use-apn-lookup" : false,
+ "cellular.debug-at" : false,
+ "lwip.ipv4-enabled" : true,
+ "lwip.ethernet-enabled" : false,
+ "lwip.ppp-enabled" : true,
+ "lwip.tcp-enabled" : true,
+ "lwip.pbuf-pool-size" : 16,
+ "lwip.mem-size" : 12500,
+ "update-client.bootloader-details" : "0x08005ee8",
+ "update-client.application-details" : "(MBED_ROM_START + MBED_BOOTLOADER_SIZE)",
+ "update-client.storage-address" : "(MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_BASE_ADDRESS+MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_SIZE)",
+ "update-client.storage-size" : "(1024*1024-MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_SIZE)",
+ "update-client.storage-page" : 1,
+ "mbed-cloud-client.update-storage" : "ARM_UCP_FLASHIAP",
+ "storage_tdb_internal.internal_base_address": "(MBED_ROM_START+1024*1024)",
+ "storage_tdb_internal.internal_size" : "(32*1024)",
+ "storage.storage_type" : "TDB_INTERNAL"
+ }
+ },
+ "config": {
+ "bootloader-size": {
+ "help" : "Helper macro to enable calculation of rom regions. target.header_offset and target.app_offset still needs to be calculated manually, though.",
+ "value" : "(32*1024)",
+ "macro_name": "MBED_BOOTLOADER_SIZE"
+ },
+ "run-ci": {
+ "help" : "Configuration item to control the level of CI verification. 0 = ignored, 1 = build-only, 2 = build + E2E tests",
+ "accepted_values": [0, 1, 2],
+ "value" : 1
}
}
-}
\ No newline at end of file
+}