Diff: targets/hal/TARGET_NXP/TARGET_LPC11UXX/pwmout_api.c

Revision:

274:6937b19af361

Parent:

227:7bd0639b8911

diff -r 92da1fd309d2 -r 6937b19af361 targets/hal/TARGET_NXP/TARGET_LPC11UXX/pwmout_api.c
--- a/targets/hal/TARGET_NXP/TARGET_LPC11UXX/pwmout_api.c	Wed Aug 06 07:45:07 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/pwmout_api.c	Wed Aug 06 08:15:07 2014 +0100
@@ -17,38 +17,11 @@
 #include "pwmout_api.h"
 #include "cmsis.h"
 #include "pinmap.h"
+#include "PeripheralPins.h" // For the Peripheral to Pin Definitions found in the individual Target's Platform
 
 #define TCR_CNT_EN       0x00000001
 #define TCR_RESET        0x00000002
 
-/* To have a PWM where we can change both the period and the duty cycle,
- * we need an entire timer. With the following conventions:
- *   * MR3 is used for the PWM period
- *   * MR0, MR1, MR2 are used for the duty cycle
- */
-static const PinMap PinMap_PWM[] = {
-    /* CT16B0 */
-    {P0_8 , PWM_1, 2}, {P1_13, PWM_1, 2},    /* MR0 */
-    {P0_9 , PWM_2, 2}, {P1_14, PWM_2, 2},   /* MR1 */
-    {P0_10, PWM_3, 3}, {P1_15, PWM_3, 2},   /* MR2 */
-
-    /* CT16B1 */
-    {P0_21, PWM_4, 1},                      /* MR0 */
-    {P0_22, PWM_5, 2}, {P1_23, PWM_5, 1},   /* MR1 */
-
-    /* CT32B0 */
-    {P0_18, PWM_6, 2}, {P1_24, PWM_6, 1},   /* MR0 */
-    {P0_19, PWM_7, 2}, {P1_25, PWM_7, 1},   /* MR1 */
-    {P0_1 , PWM_8, 2}, {P1_26, PWM_8, 1},   /* MR2 */
-
-    /* CT32B1 */
-    {P0_13, PWM_9 , 3}, {P1_0, PWM_9 , 1},  /* MR0 */
-    {P0_14, PWM_10, 3}, {P1_1, PWM_10, 1},  /* MR1 */
-    {P0_15, PWM_11, 3}, {P1_2, PWM_11, 1},  /* MR2 */
-
-    {NC, NC, 0}
-};
-
 typedef struct {
     uint8_t timer;
     uint8_t mr;