Oscar de Jesus Vasquez
Control de cargas por medio de optoacopladores con comunicacion BT
Revision 0:4196d7ffeb5a, committed 2016-05-14
- Comitter:
- oscarvzfz
- Date:
- Sat May 14 18:03:52 2016 +0000
- Commit message:
- blabla;
Changed in this revision
diff -r 000000000000 -r 4196d7ffeb5a DHT22.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/DHT22.lib Sat May 14 18:03:52 2016 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/Julepalme/code/DHT22/#7fd3ff04ae95
diff -r 000000000000 -r 4196d7ffeb5a main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Sat May 14 18:03:52 2016 +0000
@@ -0,0 +1,99 @@
+#include "mbed.h"
+#include "DHT22.h"
+
+PwmOut pulso(LED1);
+Serial pc(USBTX, USBRX);
+Serial blue(p13,p14); // TX = P14 RX = P13
+
+DigitalOut sala(p30);
+DigitalOut foco(p29);
+DigitalOut ventilador(p28);
+DigitalOut fuente(p27);
+DigitalOut jardin(p26);
+Ticker cruce;
+Timeout sen;
+const float powerlinefrequency=60.000;
+volatile float dim;
+Timeout SSRtriggerOn;
+AnalogIn mq2(p20);
+float value = 0;
+float cal=0;
+float calt=0;
+float Rgas,Raire;
+
+
+char n;
+float m=180;
+
+float temp,hum;m
+
+DHT22 dht22(p15) ;
+
+void triggerOn()
+{
+ foco = 1;
+}
+
+ void dimmer()
+{
+ // turn off SSR at zero crossing
+ foco = 0;
+ // compute time delay using dim value and set timer interrupt
+ // triggers SSR after a small post zero crossing time delay
+ SSRtriggerOn.attach(&triggerOn,(dim)/(2*powerlinefrequency));
+}
+void sensado()
+{ dht22.sample() ;
+ temp=dht22.getTemperature();
+ hum=dht22.getHumidity();
+ Rgas=mq2/(3.3-mq2);
+ blue.printf("%2.2f,%2.2f,%2.2f",temp/10,hum/10,(Rgas/Raire)*100);
+
+
+ }
+
+int main()
+{
+ for(int x = 0 ; x < 20 ; x++)
+ {
+ cal = cal + mq2 ;
+ wait(.1);
+
+ }
+ calt=(cal/20)*3.3;
+ Raire=calt/(3.3-calt);
+
+ cruce.attach(&dimmer, 0.00833333);
+ sen.attach(&sensado, 1);
+
+ blue.baud(9600);
+ pc.baud(9600);
+ pc.printf("Bluetooth Start\r\n");
+
+ // echo back characters and toggle the LED
+ while (1)
+ {
+ if (blue.readable())
+ {
+ n=blue.getc();
+ pc.putc(n);
+ if(n=='H'){if(m<180)m=m+5;}
+ if(n=='h'){if(m<180)m=m-5;}
+
+ if(n=='J'){jardin=1;}
+ if(n=='j'){jardin=0;}
+ if(n=='C'){ventilador=1;}
+ if(n=='c'){ventilador=0;}
+ if(n=='F'){fuente=1;}
+ if(n=='f'){fuente=0;}
+ if(n=='S'){sala=1;}
+ if(n=='s'){sala=0;}
+
+ dim=m/180+0.001;
+
+ }
+
+
+
+ }
+}
\ No newline at end of file
diff -r 000000000000 -r 4196d7ffeb5a mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Sat May 14 18:03:52 2016 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/165afa46840b \ No newline at end of file