mbed on BSD

Page last updated 04 Jan 2011, by Suga koubou. 0 replies

mbed on BSD

Linux は対応がうたわれているが BSD でも以下の通り認識する。
X Window Systemでブラウザが稼働するので、BSD上での開発も問題ない。

FreeBSD 8.1

ugen1.2: <mbed> at usbus1
umass0: <mbed Microcontroller, class 2/0, rev 1.10/1.00, addr 2> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <mbed Microcontroller 1.0> Removable Direct Access SCSI-0 device 
da0: 1.000MB/s transfers
da0: 2MB (4096 512 byte sectors: 64H 32S/T 2C)

# mount -t msdosfs /dev/da0 /mnt
# ls /mnt
MBED.HTM

OpenBSD 4.8

umass0 at uhub2 port 2 configuration 1 interface 0 "mbed Microcontroller" rev 1.10/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <mbed, Microcontroller, 1.0> SCSI0 0/direct removable
sd0: 2MB, 512 bytes/sec, 4096 sec total
umodem0 at uhub2 port 2 configuration 1 interface 1 "mbed Microcontroller" rev 1.10/1.00 addr 2
umodem0: data interface 2, has CM over data, has break
umodem0: status change notification available
ucom0 at umodem0

# mount -t msdos /dev/sd0c /mnt
# ls /mnt
MBED.HTM

0 comments

You need to log in to post a comment