Suga koubou
DMX512, RDM send/recv library http://mbed.org/users/okini3939/notebook/dmx512
Dependents: dmx_test ArtNodeLED SPK-DVIMXR SPK-DMXer ... more
DMX512 send/recv library
DMX512 is protocol for lighting.
調光プロトコル DMX512 を送受信するライブラリです。
see: http://mbed.org/users/okini3939/notebook/dmx512/
LPC1114 support is thanks to Stanly Chen
Revision 19:ae8fd2ba7c53, committed 2017-10-20
- Comitter:
- okini3939
- Date:
- Fri Oct 20 00:44:06 2017 +0000
- Parent:
- 18:69d65ca92bcc
- Commit message:
- supported RDM
Changed in this revision
diff -r 69d65ca92bcc -r ae8fd2ba7c53 DMX.cpp
--- a/DMX.cpp Mon Jan 11 06:17:04 2016 +0000
+++ b/DMX.cpp Fri Oct 20 00:44:06 2017 +0000
@@ -1,6 +1,6 @@
/*
- * DMX512 send/recv library
- * Copyright (c) 2013 Hiroshi Suga
+ * DMX512, RDM send/recv library
+ * Copyright (c) 2017 Hiroshi Suga
* Released under the MIT License: http://mbed.org/license/mit
*/
@@ -11,8 +11,14 @@
#include "mbed.h"
#include "DMX.h"
-DMX::DMX (PinName p_tx, PinName p_rx) : _dmx(p_tx, p_rx) {
+
+DMX::DMX (PinName p_tx, PinName p_rx, PinName p_xmit) : _dmx(p_tx, p_rx) {
+ if (p_xmit == NC) {
+ _xmit = NULL;
+ } else {
+ _xmit = new DigitalOut(p_xmit, XMIT_RX);
+ }
clear();
// mode_tx = DMX_MODE_BEGIN;
mode_tx = DMX_MODE_STOP;
@@ -25,6 +31,15 @@
time_mab = DMX_TIME_MAB;
time_mbb = DMX_TIME_MBB;
+#ifdef RDM_ENABLE
+ mode_rdm = 0;
+ rdm_mute = 0;
+ rdm_msgcount = 0;
+ rdm_transno = 0;
+ cb_RdmParser = NULL;
+ buf_uid_size = 0;
+#endif
+
#if defined(TARGET_LPC1768) || defined(TARGET_LPC2368)
if (p_rx == P0_3) {
_uart = (LPC_UART_TypeDef*)LPC_UART0;
@@ -111,6 +126,9 @@
case DMX_MODE_BEGIN:
// Break Time
timeout01.detach();
+#ifdef RDM_ENABLE
+ if (mode_rdm && _xmit) _xmit->write(XMIT_TX);
+#endif
_uart->LCR |= (1 << 6);
mode_tx = DMX_MODE_BREAK;
timeout01.attach_us(this, &DMX::int_timer, time_break);
@@ -129,13 +147,29 @@
timeout01.detach();
addr_tx = 0;
mode_tx = DMX_MODE_DATA;
- _dmx.attach(this, &DMX::int_tx, Serial::TxIrq);
#ifdef DMX_UART_DIRECT
while(!(_uart->LSR & (1<<5)));
+#ifdef RDM_ENABLE
+ if (mode_rdm) {
+ _uart->THR = RDM_START_CODE;
+ } else {
+ _uart->THR = DMX_START_CODE;
+ }
+#else
_uart->THR = DMX_START_CODE;
+#endif // RDM_ENABLE
+#else
+#ifdef RDM_ENABLE
+ if (mode_rdm) {
+ _dmx.putc(RDM_START_CODE);
+ } else {
+ _dmx.putc(DMX_START_CODE);
+ }
#else
_dmx.putc(DMX_START_CODE);
+#endif // RDM_ENABLE
#endif
+ _dmx.attach(this, &DMX::int_tx, Serial::TxIrq);
break;
}
}
@@ -143,7 +177,17 @@
void DMX::int_tx () {
// Data
if (mode_tx == DMX_MODE_DATA) {
+#ifdef RDM_ENABLE
+ if (mode_rdm && addr_tx < data_rdm[1] + 1) {
+ // RDM data
+ _dmx.putc(data_rdm[addr_tx]);
+ addr_tx ++;
+ } else
+ if (!mode_rdm && addr_tx < DMX_SIZE) {
+#else
if (addr_tx < DMX_SIZE) {
+#endif // RDM_ENABLE
+ // DMX data
#ifdef DMX_UART_DIRECT
_uart->THR = (uint8_t)data_tx[addr_tx];
#else
@@ -151,10 +195,20 @@
#endif
addr_tx ++;
} else {
- _dmx.attach(0, Serial::TxIrq);
+ _dmx.attach(0, Serial::TxIrq); // disable
mode_tx = DMX_MODE_BEGIN;
is_sent = 1;
+#ifdef RDM_ENABLE
+ if (mode_rdm) {
+ if (_xmit) _xmit->write(XMIT_RX);
+ mode_rdm = 0;
+ mode_tx = DMX_MODE_STOP;
+ } else {
+ timeout01.attach_us(this, &DMX::int_timer, time_mbb);
+ }
+#else
timeout01.attach_us(this, &DMX::int_timer, time_mbb);
+#endif // RDM_ENABLE
}
}
}
@@ -171,6 +225,9 @@
if (flg & ((1 << 7)|(1 << 3)|(1 << 4))) {
// Break Time
+ if (is_rdm_received) {
+ return;
+ } else
if (addr_rx >= 24 && mode_rx == DMX_MODE_DATA) {
is_received = 1;
}
@@ -184,6 +241,12 @@
if (dat == DMX_START_CODE) {
addr_rx = 0;
mode_rx = DMX_MODE_DATA;
+#ifdef RDM_ENABLE
+ } else
+ if (dat == RDM_START_CODE) {
+ addr_rx = 0;
+ mode_rx = DMX_MODE_RDM;
+#endif
} else {
mode_rx = DMX_MODE_ERROR;
}
@@ -199,11 +262,31 @@
is_received = 1;
mode_rx = DMX_MODE_BEGIN;
}
+
+#ifdef RDM_ENABLE
+ } else
+ if (mode_rx == DMX_MODE_RDM) {
+
+ // Rdm
+ data_rx[addr_rx] = dat;
+ addr_rx ++;
+
+ if (addr_rx >= 2 && addr_rx >= data_rx[1] + 1) {
+ is_rdm_received = 1;
+ mode_rx = DMX_MODE_BEGIN;
+ } else
+ if (addr_rx >= sizeof(data_rdm)) {
+ mode_rx = DMX_MODE_ERROR;
+ }
+#endif
}
}
void DMX::start () {
if (mode_tx == DMX_MODE_STOP) {
+#ifdef RDM_ENABLE
+ if (_xmit) _xmit->write(XMIT_TX);
+#endif
mode_tx = DMX_MODE_BEGIN;
is_sent = 0;
timeout01.attach_us(this, &DMX::int_timer, time_mbb);
@@ -214,6 +297,9 @@
_dmx.attach(0, Serial::TxIrq);
timeout01.detach();
mode_tx = DMX_MODE_STOP;
+#ifdef RDM_ENABLE
+ if (_xmit) _xmit->write(XMIT_RX);
+#endif
}
void DMX::clear () {
diff -r 69d65ca92bcc -r ae8fd2ba7c53 DMX.h
--- a/DMX.h Mon Jan 11 06:17:04 2016 +0000
+++ b/DMX.h Fri Oct 20 00:44:06 2017 +0000
@@ -1,6 +1,6 @@
/*
- * DMX512 send/recv library
- * Copyright (c) 2013 Hiroshi Suga
+ * DMX512, RDM send/recv library
+ * Copyright (c) 2017 Hiroshi Suga
* Released under the MIT License: http://mbed.org/license/mit
*/
@@ -8,20 +8,32 @@
* @brief DMX512 send/recv
*/
-#ifndef DMX_H
-#define DMX_H
+#ifndef __DMX_H__
+#define __DMX_H__
+
+#define RDM_ENABLE
#include "mbed.h"
#include "RawSerial.h"
+#ifdef RDM_ENABLE
+#include "RDM.h"
+#endif
+
//#define DMX_UART_DIRECT
#define DMX_SIZE 512
#define DMX_START_CODE 0
+#define RDM_START_CODE E120_SC_RDM
+#define RDM_SUB_CODE E120_SC_SUB_MESSAGE
+#define XMIT_TX 1
+#define XMIT_RX 0
+
#define DMX_TIME_BREAK 100 // 100us (88us-1s)
#define DMX_TIME_MAB 12 // 12us (8us-1s)
#define DMX_TIME_MBB 200 // 10us (0-1s)
+#define RDM_TIME_DELAY 100
enum DMX_MODE {
DMX_MODE_BEGIN,
@@ -31,8 +43,28 @@
DMX_MODE_DATA,
DMX_MODE_ERROR,
DMX_MODE_STOP,
+ DMX_MODE_RDMSUB,
+ DMX_MODE_RDM,
};
+#ifdef RDM_ENABLE
+struct RDM_DATA {
+// uint8_t StartCode;
+ uint8_t SubStartCode;
+ uint8_t Length;
+ uint8_t DestID[6];
+ uint8_t SourceID[6];
+ uint8_t TransactionNo;
+ uint8_t ResponseType;
+ uint8_t MessageCount;
+ uint16_t SubDev;
+ uint8_t CmdClass;
+ uint16_t Parameter;
+ uint8_t DataLength;
+ uint8_t Data[231];
+} __attribute__((packed));
+#endif
+
/** DMX512 class (sender/client)
*/
class DMX {
@@ -40,8 +72,9 @@
/** init DMX class
* @param p_tx TX serial port (p9, p13, p28)
* @param p_rx RX serial port (p10, p14, p27)
+ * @param p_re data enable/~receive enable
*/
- DMX (PinName p_tx, PinName p_rx);
+ DMX (PinName p_tx, PinName p_rx, PinName p_xmit = NC);
/** Send the data
* @param addr DMX data address (0-511)
@@ -83,6 +116,16 @@
unsigned char *getTxBuffer ();
int setTimingParameters (int breaktime, int mab, int mbb);
+#ifdef RDM_ENABLE
+ void pollRdm ();
+ int sendRdmMsg (struct RDM_DATA *rdm, int CmdClass, unsigned char *data, int len);
+ int sendRdmMsg (unsigned char *dest, int CmdClass, int Parameter, int Type, unsigned char *data, int len, int block = 0);
+ void attachRdmCallback (void (*handler)(struct RDM_DATA *), char *uid);
+
+ int sendRdmDiscMute (unsigned char *dest, int mute);
+ int rdmDiscovery (unsigned char *buf, int size);
+#endif
+
protected:
void int_timer ();
@@ -91,14 +134,37 @@
// Serial _dmx;
RawSerial _dmx;
+ DigitalOut *_xmit;
Timeout timeout01;
volatile DMX_MODE mode_tx, mode_rx;
volatile int addr_tx, addr_rx;
unsigned char data_tx[DMX_SIZE];
unsigned char data_rx[DMX_SIZE];
- int is_received, is_sent;
+ volatile int is_received, is_sent, is_rdm_received;
int time_break, time_mab, time_mbb;
+#ifdef RDM_ENABLE
+ volatile int mode_rdm;
+ unsigned char rdm_uid[6];
+ int rdm_mute, rdm_msgcount, rdm_transno;
+ unsigned char data_rdm[64];
+ unsigned char found_uid[6];
+ unsigned char *buf_uid;
+ int buf_uid_count, buf_uid_size;
+
+ int calcCrc (unsigned char *buf, int len, int offset = RDM_START_CODE);
+ void rdmStart (int block = 0);
+ void rdmWaitResponse (int ms);
+ int sendRdmDiscResponse (struct RDM_DATA *rdm);
+ int sendRdmDiscMuteResponse (struct RDM_DATA *rdm);
+
+ void int_rdm ();
+ int sendRdmDiscovery (uint64_t uid_begin, uint64_t uid_end);
+ int rdmDiscoverySub (uint64_t uid_begin, uint64_t uid_end, int ttl);
+
+ void (*cb_RdmParser)(struct RDM_DATA *rdm);
+#endif
+
private:
#if defined(TARGET_LPC1768) || defined(TARGET_LPC2368) || defined(TARGET_LPC4088)
LPC_UART_TypeDef *_uart;
diff -r 69d65ca92bcc -r ae8fd2ba7c53 RDM.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/RDM.cpp Fri Oct 20 00:44:06 2017 +0000
@@ -0,0 +1,366 @@
+/*
+ * DMX512, RDM send/recv library
+ * Copyright (c) 2017 Hiroshi Suga
+ * Released under the MIT License: http://mbed.org/license/mit
+ */
+
+/** @file
+ * @brief DMX512 send/recv
+ */
+
+#include "mbed.h"
+#include "DMX.h"
+
+#ifdef RDM_ENABLE
+
+#define htons(n) __REV16(n)
+#define ntohs(n) __REV16(n)
+#define htonl(n) __REV(n)
+#define ntohl(n) __REV(n)
+
+static unsigned char uid_broadcast[6] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+
+void DMX::pollRdm () {
+ int i, len, crc, forMe, forGrp, forAll;
+ struct RDM_DATA *rdm = (struct RDM_DATA *)data_rx;
+
+ if (!is_rdm_received) return;
+ is_rdm_received = 0;
+ if (rdm->Length < 24) return;
+
+ len = rdm->DataLength;
+ crc = (rdm->Data[len] << 8) | rdm->Data[len + 1];
+ if (calcCrc(data_rx, rdm->Length - 1) != crc) return;
+
+ forMe = memcmp(rdm_uid, rdm->DestID, 6) == 0 ? 1 : 0;
+ forGrp = (rdm_uid[0] == rdm->DestID[0] && rdm_uid[1] == rdm->DestID[1] && memcmp(&rdm_uid[2], uid_broadcast, 4) == 0) ? 1 : 0;
+ forAll = memcmp(rdm_uid, uid_broadcast, 6) == 0 ? 1 : 0;
+
+ switch (rdm->CmdClass) {
+ case E120_DISCOVERY_COMMAND:
+ switch (ntohs(rdm->Parameter)) {
+ case E120_DISC_UNIQUE_BRANCH:
+ if (rdm->DataLength == 12 && !rdm_mute) {
+ if (memcmp(rdm_uid, &rdm->Data[0], 6) >= 0 && memcmp(rdm_uid, &rdm->Data[6], 6) <= 0) {
+ sendRdmDiscResponse(rdm);
+ }
+ }
+ break;
+
+ case E120_DISC_MUTE:
+ case E120_DISC_UN_MUTE:
+ if (forMe || forGrp || forAll) {
+ if (rdm->CmdClass == E120_DISC_MUTE) {
+ rdm_mute = 1;
+ } else {
+ rdm_mute = 0;
+ }
+ if (forMe) sendRdmDiscMuteResponse(rdm);
+ }
+ break;
+
+ }
+ break;
+
+ case E120_DISCOVERY_COMMAND_RESPONSE:
+ switch (ntohs(rdm->Parameter)) {
+ case E120_DISC_MUTE:
+ case E120_DISC_UN_MUTE:
+ if (forMe && memcmp(found_uid, rdm->SourceID, 6) == 0) {
+ if (buf_uid_size && buf_uid_count < buf_uid_size) {
+ memcpy(&buf_uid[6 * buf_uid_count], rdm->SourceID, 6);
+ buf_uid_count ++;
+ }
+ }
+ }
+ break;
+
+ case E120_GET_COMMAND:
+ case E120_SET_COMMAND:
+ if ((forMe || forGrp || forAll) && cb_RdmParser) {
+ cb_RdmParser(rdm);
+ }
+ break;
+
+ case E120_GET_COMMAND_RESPONSE:
+ case E120_SET_COMMAND_RESPONSE:
+ if ((forMe || forGrp || forAll) && cb_RdmParser) {
+ cb_RdmParser(rdm);
+ }
+ break;
+ }
+}
+
+int DMX::calcCrc (unsigned char *buf, int len, int offset) {
+ int i, crc = offset;
+
+ for (i = 0; i < len; i ++) {
+ crc += buf[i];
+ }
+ return crc;
+}
+
+void DMX::rdmStart (int block) {
+ Timer t;
+
+ t.start();
+ while (mode_rx != DMX_MODE_BEGIN && t.read_ms() < 100) {
+ pollRdm();
+ }
+ t.stop();
+
+ mode_rdm = 1;
+ mode_rx = DMX_MODE_BEGIN;
+ mode_tx = DMX_MODE_BEGIN;
+ is_sent = 0;
+ is_received = 0;
+ is_rdm_received = 0;
+ timeout01.attach_us(this, &DMX::int_timer, RDM_TIME_DELAY);
+
+ if (block) {
+ while (mode_rdm);
+ }
+}
+
+void DMX::rdmWaitResponse (int ms) {
+ Timer t;
+
+ t.start();
+ while (t.read_ms() < ms && !is_rdm_received) {
+ pollRdm();
+ }
+ t.stop();
+ pollRdm();
+}
+
+int DMX::sendRdmDiscResponse (struct RDM_DATA *rdm) {
+ int crc;
+ unsigned char data[40];
+
+ data[0] = 0xFE;
+ data[1] = 0xFE;
+ data[2] = 0xFE;
+ data[3] = 0xFE;
+ data[4] = 0xFE;
+ data[5] = 0xFE;
+ data[6] = 0xFE;
+ data[7] = 0xAA;
+ data[8] = rdm_uid[0] | 0xAA;
+ data[9] = rdm_uid[0] | 0x55;
+ data[10] = rdm_uid[1] | 0xAA;
+ data[11] = rdm_uid[1] | 0x55;
+ data[12] = rdm_uid[2] | 0xAA;
+ data[13] = rdm_uid[2] | 0x55;
+ data[14] = rdm_uid[3] | 0xAA;
+ data[15] = rdm_uid[3] | 0x55;
+ data[16] = rdm_uid[4] | 0xAA;
+ data[17] = rdm_uid[4] | 0x55;
+ data[18] = rdm_uid[5] | 0xAA;
+ data[19] = rdm_uid[5] | 0x55;
+ crc = calcCrc(&data[8], 12, 0);
+ data[20] = ((crc >> 8) & 0xFF) | 0xAA;
+ data[21] = ((crc >> 8) & 0xFF) | 0x55;
+ data[22] = (crc & 0xFF) | 0xAA;
+ data[23] = (crc & 0xFF) | 0x55;
+
+ wait_us(RDM_TIME_DELAY);
+/*
+ do {
+ wait_us(RDM_TIME_DELAY * (rand() / (RAND_MAX / 10)));
+ } while (mode_rx != DMX_MODE_BEGIN);
+*/
+ if (_xmit) _xmit->write(XMIT_TX);
+ wait_us(10);
+ for (int i = 0; i < 24; i ++) {
+ _dmx.putc(data[i]);
+ }
+ while (!(_uart->LSR & (1<<6))); // TEMT
+ if (_xmit) _xmit->write(XMIT_RX);
+
+ return 0;
+}
+
+int DMX::sendRdmMsg (struct RDM_DATA *rdm, int CmdClass, unsigned char *data, int len) {
+ int crc;
+ struct RDM_DATA *rdm_msg = (struct RDM_DATA *)data_rdm;
+
+ while (mode_rdm);
+ rdm_msgcount ++;
+ rdm_msg->SubStartCode = E120_SC_SUB_MESSAGE;
+ rdm_msg->Length = 24 + len;
+ memcpy(rdm_msg->DestID, rdm->SourceID, 6);
+ memcpy(rdm_msg->SourceID, rdm_uid, 6);
+ rdm_msg->TransactionNo = rdm->TransactionNo;
+ rdm_msg->ResponseType = E120_RESPONSE_TYPE_ACK;
+ rdm_msg->MessageCount = rdm_msgcount;
+ rdm_msg->SubDev = 0;
+ rdm_msg->CmdClass = CmdClass;
+ rdm_msg->Parameter = rdm->Parameter;
+ rdm_msg->DataLength = len;
+ if (data && len) {
+ memcpy(rdm_msg->Data, data, len);
+ }
+ crc = calcCrc((unsigned char *)rdm_msg, rdm_msg->Length - 1);
+ rdm_msg->Data[len] = (crc >> 8) & 0xFF;
+ rdm_msg->Data[len + 1] = crc & 0xFF;
+
+ rdmStart();
+ return 0;
+}
+
+int DMX::sendRdmMsg (unsigned char *dest, int CmdClass, int Parameter, int Type, unsigned char *data, int len, int block) {
+ int crc;
+ struct RDM_DATA *rdm_msg = (struct RDM_DATA *)data_rdm;
+
+ while (mode_rdm);
+ rdm_transno ++;
+ rdm_msgcount ++;
+ rdm_msg->SubStartCode = E120_SC_SUB_MESSAGE;
+ rdm_msg->Length = 24 + len;
+ memcpy(rdm_msg->DestID, dest, 6);
+ memcpy(rdm_msg->SourceID, rdm_uid, 6);
+ rdm_msg->TransactionNo = rdm_transno;
+ rdm_msg->ResponseType = Type;
+ rdm_msg->MessageCount = rdm_msgcount;
+ rdm_msg->SubDev = 0;
+ rdm_msg->CmdClass = CmdClass;
+ rdm_msg->Parameter = htons(Parameter);
+ rdm_msg->DataLength = len;
+ if (data && len) {
+ memcpy(rdm_msg->Data, data, len);
+ }
+ crc = calcCrc((unsigned char *)rdm_msg, rdm_msg->Length - 1);
+ rdm_msg->Data[len] = (crc >> 8) & 0xFF;
+ rdm_msg->Data[len + 1] = crc & 0xFF;
+
+ rdmStart(block);
+ return 0;
+}
+
+int DMX::sendRdmDiscMuteResponse (struct RDM_DATA *rdm) {
+ unsigned char data[2] = {0, 0};
+
+ return sendRdmMsg(rdm, E120_DISCOVERY_COMMAND_RESPONSE, data, 2);
+}
+
+void DMX::attachRdmCallback (void (*handler)(struct RDM_DATA *), char *uid) {
+
+ cb_RdmParser = handler;
+ memcpy(rdm_uid, uid, 6);
+}
+
+void DMX::int_rdm () {
+ int flg, dat;
+
+ flg = _uart->LSR;
+ dat = _dmx.getc();
+
+ if (flg & ((1 << 7)|(1 << 3)|(1 << 4))) {
+ // Conflict
+ addr_rx = -1;
+ return;
+ }
+
+ if (addr_rx >= 0 && addr_rx < DMX_SIZE) {
+ data_rx[addr_rx] = dat;
+ addr_rx ++;
+ }
+}
+
+int DMX::sendRdmDiscMute (unsigned char *dest, int mute) {
+
+ while (mode_rdm);
+
+ int param = mute ? E120_DISC_MUTE : E120_DISC_UN_MUTE;
+ sendRdmMsg(dest, E120_DISCOVERY_COMMAND, param ,E120_RESPONSE_TYPE_ACK_TIMER, NULL, 0, 1);
+ rdmWaitResponse(100);
+ return 0;
+}
+
+int DMX::sendRdmDiscovery (uint64_t uid_begin, uint64_t uid_end) {
+ int crc;
+ unsigned char data[12];
+
+ while (mode_rdm);
+
+ data[ 0] = (uid_begin >> 40) & 0xff;
+ data[ 1] = (uid_begin >> 32) & 0xff;
+ data[ 2] = (uid_begin >> 24) & 0xff;
+ data[ 3] = (uid_begin >> 16) & 0xff;
+ data[ 4] = (uid_begin >> 8) & 0xff;
+ data[ 5] = uid_begin & 0xff;
+ data[ 6] = (uid_end >> 40) & 0xff;
+ data[ 7] = (uid_end >> 32) & 0xff;
+ data[ 8] = (uid_end >> 24) & 0xff;
+ data[ 9] = (uid_end >> 16) & 0xff;
+ data[10] = (uid_end >> 8) & 0xff;
+ data[11] = uid_end & 0xff;
+
+ _dmx.attach(this, &DMX::int_rdm, Serial::RxIrq);
+ addr_rx = 0;
+ sendRdmMsg(uid_broadcast, E120_DISCOVERY_COMMAND, E120_DISC_UNIQUE_BRANCH ,E120_RESPONSE_TYPE_ACK_TIMER, data, 12, 1);
+ rdmWaitResponse(100);
+ _dmx.attach(this, &DMX::int_rx, Serial::RxIrq);
+
+ if (addr_rx >= 24) {
+ if (data_rx[0] == 0xfe && data_rx[7] == 0xaa) {
+ crc = calcCrc(&data_rx[8], 12, 0);
+ if (data_rx[20] == (((crc >> 8) & 0xFF) | 0xAA) &&
+ data_rx[21] == (((crc >> 8) & 0xFF) | 0x55) &&
+ data_rx[22] == ((crc & 0xFF) | 0xAA) && data_rx[23] == ((crc & 0xFF) | 0x55)) {
+ found_uid[0] = (data_rx[ 8] & 0x55) | (data_rx[ 9] & 0xAA);
+ found_uid[1] = (data_rx[10] & 0x55) | (data_rx[11] & 0xAA);
+ found_uid[2] = (data_rx[12] & 0x55) | (data_rx[13] & 0xAA);
+ found_uid[3] = (data_rx[14] & 0x55) | (data_rx[15] & 0xAA);
+ found_uid[4] = (data_rx[16] & 0x55) | (data_rx[17] & 0xAA);
+ found_uid[5] = (data_rx[18] & 0x55) | (data_rx[19] & 0xAA);
+ return 1;
+ }
+ return -1;
+ }
+ return -1;
+ } else
+ if (addr_rx) {
+ return -1;
+ }
+
+ return 0;
+}
+
+int DMX::rdmDiscoverySub (uint64_t uid_begin, uint64_t uid_end, int ttl) {
+ int r;
+ uint64_t uid_mid;
+
+// printf("rdmDiscoverySub %04x %08x - %04x %08x\r\n", (int)(uid_begin>>32), (int)uid_begin, (int)(uid_end>>32), (int)uid_end);
+ if (!ttl) return 0;
+ ttl --;
+
+ r = sendRdmDiscovery(uid_begin, uid_end);
+ if (uid_begin >= uid_end) {
+ if (r > 0) {
+ sendRdmDiscMute(found_uid, 1);
+ }
+ } else {
+ if (r > 0) {
+ sendRdmDiscMute(found_uid, 1);
+ }
+ if (r) {
+ uid_mid = (uid_begin + uid_end) / 2;
+ r = rdmDiscoverySub(uid_begin, uid_mid, ttl);
+ r |= rdmDiscoverySub(uid_mid + 1, uid_end, ttl);
+ }
+ }
+ return r;
+}
+
+int DMX::rdmDiscovery (unsigned char *buf, int size) {
+
+ buf_uid_count = 0;
+ buf_uid_size = size;
+ buf_uid = buf;
+ sendRdmDiscMute(uid_broadcast, 0);
+ rdmDiscoverySub(0x000000000000, 0xfffffffffffe, 10);
+ return buf_uid_count;
+}
+
+#endif
diff -r 69d65ca92bcc -r ae8fd2ba7c53 RDM.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/RDM.h Fri Oct 20 00:44:06 2017 +0000 @@ -0,0 +1,677 @@ +/*****************************************************************/ +/* Entertainment Services Technology Association (ESTA) */ +/* ANSI E1.20 Remote Device Management (RDM) over DMX512 Networks*/ +/*****************************************************************/ +/* */ +/* RDM.h */ +/* */ +/*****************************************************************/ +/* Appendix A Defines for the RDM Protocol. */ +/* Publish date: 3/31/2006 */ +/*****************************************************************/ +/* Compiled by: Scott M. Blair 8/18/2006 */ +/* Updated 10/11/2011: Adding E1.20-2010 and E1.37-1 defines. */ +/* Updated 10/24/2014: Adding E1.37-2 defines */ +/*****************************************************************/ +/* For updates see: http://www.rdmprotocol.org */ +/*****************************************************************/ +/* Copyright 2006,2011, 2014 Litespeed Design */ +/*****************************************************************/ +/* Permission to use, copy, modify, and distribute this software */ +/* is freely granted, provided that this notice is preserved. */ +/*****************************************************************/ + +#ifndef __RDM_H__ +#define __RMD_H__ + +/* Protocol version. */ +#define E120_PROTOCOL_VERSION 0x0100 + +/* RDM START CODE (Slot 0) */ +#define E120_SC_RDM 0xCC + +/* RDM Protocol Data Structure ID's (Slot 1) */ +#define E120_SC_SUB_MESSAGE 0x01 + +/* Broadcast Device UID's */ +#define E120_BROADCAST_ALL_DEVICES_ID 0xFFFFFFFFFFFF /* (Broadcast all Manufacturers) */ +//#define ALL_DEVICES_ID 0xmmmmFFFFFFFF /* (Specific Manufacturer ID 0xmmmm) */ + +#define E120_SUB_DEVICE_ALL_CALL 0xFFFF + + +/********************************************************/ +/* Table A-1: RDM Command Classes (Slot 20) */ +/********************************************************/ +#define E120_DISCOVERY_COMMAND 0x10 +#define E120_DISCOVERY_COMMAND_RESPONSE 0x11 +#define E120_GET_COMMAND 0x20 +#define E120_GET_COMMAND_RESPONSE 0x21 +#define E120_SET_COMMAND 0x30 +#define E120_SET_COMMAND_RESPONSE 0x31 + + + +/********************************************************/ +/* Table A-2: RDM Response Type (Slot 16) */ +/********************************************************/ +#define E120_RESPONSE_TYPE_ACK 0x00 +#define E120_RESPONSE_TYPE_ACK_TIMER 0x01 +#define E120_RESPONSE_TYPE_NACK_REASON 0x02 /* See Table A-17 */ +#define E120_RESPONSE_TYPE_ACK_OVERFLOW 0x03 /* Additional Response Data available beyond single response length.*/ + + +/********************************************************/ +/* Table A-3: RDM Parameter ID's (Slots 21-22) */ +/********************************************************/ +/* Category - Network Management */ +#define E120_DISC_UNIQUE_BRANCH 0x0001 +#define E120_DISC_MUTE 0x0002 +#define E120_DISC_UN_MUTE 0x0003 +#define E120_PROXIED_DEVICES 0x0010 +#define E120_PROXIED_DEVICE_COUNT 0x0011 +#define E120_COMMS_STATUS 0x0015 + +/* Category - Status Collection */ +#define E120_QUEUED_MESSAGE 0x0020 /* See Table A-4 */ +#define E120_STATUS_MESSAGES 0x0030 /* See Table A-4 */ +#define E120_STATUS_ID_DESCRIPTION 0x0031 +#define E120_CLEAR_STATUS_ID 0x0032 +#define E120_SUB_DEVICE_STATUS_REPORT_THRESHOLD 0x0033 /* See Table A-4 */ + +/* Category - RDM Information */ +#define E120_SUPPORTED_PARAMETERS 0x0050 /* Support required only if supporting Parameters beyond the minimum required set.*/ +#define E120_PARAMETER_DESCRIPTION 0x0051 /* Support required for Manufacturer-Specific PIDs exposed in SUPPORTED_PARAMETERS message */ + +/* Category - Product Information */ +#define E120_DEVICE_INFO 0x0060 +#define E120_PRODUCT_DETAIL_ID_LIST 0x0070 +#define E120_DEVICE_MODEL_DESCRIPTION 0x0080 +#define E120_MANUFACTURER_LABEL 0x0081 +#define E120_DEVICE_LABEL 0x0082 +#define E120_FACTORY_DEFAULTS 0x0090 +#define E120_LANGUAGE_CAPABILITIES 0x00A0 +#define E120_LANGUAGE 0x00B0 +#define E120_SOFTWARE_VERSION_LABEL 0x00C0 +#define E120_BOOT_SOFTWARE_VERSION_ID 0x00C1 +#define E120_BOOT_SOFTWARE_VERSION_LABEL 0x00C2 + +/* Category - DMX512 Setup */ +#define E120_DMX_PERSONALITY 0x00E0 +#define E120_DMX_PERSONALITY_DESCRIPTION 0x00E1 +#define E120_DMX_START_ADDRESS 0x00F0 /* Support required if device uses a DMX512 Slot. */ +#define E120_SLOT_INFO 0x0120 +#define E120_SLOT_DESCRIPTION 0x0121 +#define E120_DEFAULT_SLOT_VALUE 0x0122 +#define E137_1_DMX_BLOCK_ADDRESS 0x0140 /* Defined in ANSI E1.37-1 document */ +#define E137_1_DMX_FAIL_MODE 0x0141 /* Defined in ANSI E1.37-1 document */ +#define E137_1_DMX_STARTUP_MODE 0x0142 /* Defined in ANSI E1.37-1 document */ + + +/* Category - Sensors */ +#define E120_SENSOR_DEFINITION 0x0200 +#define E120_SENSOR_VALUE 0x0201 +#define E120_RECORD_SENSORS 0x0202 + +/* Category - Dimmer Settings */ +#define E137_1_DIMMER_INFO 0x0340 +#define E137_1_MINIMUM_LEVEL 0x0341 +#define E137_1_MAXIMUM_LEVEL 0x0342 +#define E137_1_CURVE 0x0343 +#define E137_1_CURVE_DESCRIPTION 0x0344 /* Support required if CURVE is supported */ +#define E137_1_OUTPUT_RESPONSE_TIME 0x0345 +#define E137_1_OUTPUT_RESPONSE_TIME_DESCRIPTION 0x0346 /* Support required if OUTPUT_RESPONSE_TIME is supported */ +#define E137_1_MODULATION_FREQUENCY 0x0347 +#define E137_1_MODULATION_FREQUENCY_DESCRIPTION 0x0348 /* Support required if MODULATION_FREQUENCY is supported */ + +/* Category - Power/Lamp Settings */ +#define E120_DEVICE_HOURS 0x0400 +#define E120_LAMP_HOURS 0x0401 +#define E120_LAMP_STRIKES 0x0402 +#define E120_LAMP_STATE 0x0403 /* See Table A-8 */ +#define E120_LAMP_ON_MODE 0x0404 /* See Table A-9 */ +#define E120_DEVICE_POWER_CYCLES 0x0405 +#define E137_1_BURN_IN 0x0440 /* Defined in ANSI E1.37-1 */ + +/* Category - Display Settings */ +#define E120_DISPLAY_INVERT 0x0500 +#define E120_DISPLAY_LEVEL 0x0501 + +/* Category - Configuration */ +#define E120_PAN_INVERT 0x0600 +#define E120_TILT_INVERT 0x0601 +#define E120_PAN_TILT_SWAP 0x0602 +#define E120_REAL_TIME_CLOCK 0x0603 +#define E137_1_LOCK_PIN 0x0640 /* Defined in ANSI E1.37-1 */ +#define E137_1_LOCK_STATE 0x0641 /* Defined in ANSI E1.37-1 */ +#define E137_1_LOCK_STATE_DESCRIPTION 0x0642 /* Support required if MODULATION_FREQUENCY is supported */ + +/* Category - Network Configuration*/ + +#define E137_2_LIST_INTERFACES 0x0700 /* Defined in ANSI E1.37-2 */ +#define E137_2_INTERFACE_LABEL 0x0701 /* Defined in ANSI E1.37-2 */ +#define E137_2_INTERFACE_HARDWARE_ADDRESS_TYPE1 0x0702 /* Defined in ANSI E1.37-2 */ +#define E137_2_IPV4_DHCP_MODE 0x0703 /* Defined in ANSI E1.37-2 */ +#define E137_2_IPV4_ZEROCONF_MODE 0x0704 /* Defined in ANSI E1.37-2 */ +#define E137_2_IPV4_CURRENT_ADDRESS 0x0705 /* Defined in ANSI E1.37-2 */ +#define E137_2_IPV4_STATIC_ADDRESS 0x0706 /* Defined in ANSI E1.37-2 */ +#define E137_2_INTERFACE_RENEW_DHCP 0x0707 /* Defined in ANSI E1.37-2 */ +#define E137_2_INTERFACE_RELEASE_DHCP 0x0708 /* Defined in ANSI E1.37-2 */ +#define E137_2_INTERFACE_APPLY_CONFIGURATION 0x0709 /* Defined in ANSI E1.37-2 (Support required if _ADDRESS PIDs supported) */ +#define E137_2_IPV4_DEFAULT_ROUTE 0x070A /* Defined in ANSI E1.37-2 */ +#define E137_2_DNS_IPV4_NAME_SERVER 0x070B /* Defined in ANSI E1.37-2 */ +#define E137_2_DNS_HOSTNAME 0x070C /* Defined in ANSI E1.37-2 */ +#define E137_2_DNS_DOMAIN_NAME 0x070D /* Defined in ANSI E1.37-2 */ + + +/* Category - Control */ +#define E120_IDENTIFY_DEVICE 0x1000 +#define E120_RESET_DEVICE 0x1001 +#define E120_POWER_STATE 0x1010 /* See Table A-11 */ +#define E120_PERFORM_SELFTEST 0x1020 /* See Table A-10 */ +#define E120_SELF_TEST_DESCRIPTION 0x1021 +#define E120_CAPTURE_PRESET 0x1030 +#define E120_PRESET_PLAYBACK 0x1031 /* See Table A-7 */ +#define E137_1_IDENTIFY_MODE 0x1040 /* Defined in ANSI E1.37-1 */ +#define E137_1_PRESET_INFO 0x1041 /* Defined in ANSI E1.37-1 */ +#define E137_1_PRESET_STATUS 0x1042 /* Defined in ANSI E1.37-1 */ +#define E137_1_PRESET_MERGEMODE 0x1043 /* See E1.37-1 Table A-3 */ +#define E137_1_POWER_ON_SELF_TEST 0x1044 /* Defined in ANSI E1.37-1 */ + +/* ESTA Reserved Future RDM Development 0x7FE0- + 0x7FFF + + Manufacturer-Specific PIDs 0x8000- + 0xFFDF + ESTA Reserved Future RDM Development + 0xFFE0- + 0xFFFF +*/ + + +/*****************************************************************/ +/* Discovery Mute/Un-Mute Messages Control Field. See Table 7-3. */ +/*****************************************************************/ +#define E120_CONTROL_PROXIED_DEVICE 0x0008 +#define E120_CONTROL_BOOT_LOADER 0x0004 +#define E120_CONTROL_SUB_DEVICE 0x0002 +#define E120_CONTROL_MANAGED_PROXY 0x0001 + + +/********************************************************/ +/* Table A-4: Status Type Defines */ +/********************************************************/ +#define E120_STATUS_NONE 0x00 /* Not allowed for use with GET: QUEUED_MESSAGE */ +#define E120_STATUS_GET_LAST_MESSAGE 0x01 +#define E120_STATUS_ADVISORY 0x02 +#define E120_STATUS_WARNING 0x03 +#define E120_STATUS_ERROR 0x04 +#define E120_STATUS_ADVISORY_CLEARED 0x12 /* Added in E1.20-2010 version */ +#define E120_STATUS_WARNING_CLEARED 0x13 /* Added in E1.20-2010 version */ +#define E120_STATUS_ERROR_CLEARED 0x14 /* Added in E1.20-2010 version */ + + + +/********************************************************/ +/* Table A-5: Product Category Defines */ +/********************************************************/ +#define E120_PRODUCT_CATEGORY_NOT_DECLARED 0x0000 + +/* Fixtures - intended as source of illumination See Note 1 */ +#define E120_PRODUCT_CATEGORY_FIXTURE 0x0100 /* No Fine Category declared */ +#define E120_PRODUCT_CATEGORY_FIXTURE_FIXED 0x0101 /* No pan / tilt / focus style functions */ +#define E120_PRODUCT_CATEGORY_FIXTURE_MOVING_YOKE 0x0102 +#define E120_PRODUCT_CATEGORY_FIXTURE_MOVING_MIRROR 0x0103 +#define E120_PRODUCT_CATEGORY_FIXTURE_OTHER 0x01FF /* For example, focus but no pan/tilt. */ + +/* Fixture Accessories - add-ons to fixtures or projectors */ +#define E120_PRODUCT_CATEGORY_FIXTURE_ACCESSORY 0x0200 /* No Fine Category declared. */ +#define E120_PRODUCT_CATEGORY_FIXTURE_ACCESSORY_COLOR 0x0201 /* Scrollers / Color Changers */ +#define E120_PRODUCT_CATEGORY_FIXTURE_ACCESSORY_YOKE 0x0202 /* Yoke add-on */ +#define E120_PRODUCT_CATEGORY_FIXTURE_ACCESSORY_MIRROR 0x0203 /* Moving mirror add-on */ +#define E120_PRODUCT_CATEGORY_FIXTURE_ACCESSORY_EFFECT 0x0204 /* Effects Discs */ +#define E120_PRODUCT_CATEGORY_FIXTURE_ACCESSORY_BEAM 0x0205 /* Gobo Rotators /Iris / Shutters / Dousers/ Beam modifiers. */ +#define E120_PRODUCT_CATEGORY_FIXTURE_ACCESSORY_OTHER 0x02FF + +/* Projectors - light source capable of producing realistic images from another media i.e Video / Slide / Oil Wheel / Film */ +#define E120_PRODUCT_CATEGORY_PROJECTOR 0x0300 /* No Fine Category declared. */ +#define E120_PRODUCT_CATEGORY_PROJECTOR_FIXED 0x0301 /* No pan / tilt functions. */ +#define E120_PRODUCT_CATEGORY_PROJECTOR_MOVING_YOKE 0x0302 +#define E120_PRODUCT_CATEGORY_PROJECTOR_MOVING_MIRROR 0x0303 +#define E120_PRODUCT_CATEGORY_PROJECTOR_OTHER 0x03FF + +/* Atmospheric Effect - earth/wind/fire */ +#define E120_PRODUCT_CATEGORY_ATMOSPHERIC 0x0400 /* No Fine Category declared. */ +#define E120_PRODUCT_CATEGORY_ATMOSPHERIC_EFFECT 0x0401 /* Fogger / Hazer / Flame, etc. */ +#define E120_PRODUCT_CATEGORY_ATMOSPHERIC_PYRO 0x0402 /* See Note 2. */ +#define E120_PRODUCT_CATEGORY_ATMOSPHERIC_OTHER 0x04FF + +/* Intensity Control (specifically Dimming equipment) */ +#define E120_PRODUCT_CATEGORY_DIMMER 0x0500 /* No Fine Category declared. */ +#define E120_PRODUCT_CATEGORY_DIMMER_AC_INCANDESCENT 0x0501 /* AC > 50VAC */ +#define E120_PRODUCT_CATEGORY_DIMMER_AC_FLUORESCENT 0x0502 +#define E120_PRODUCT_CATEGORY_DIMMER_AC_COLDCATHODE 0x0503 /* High Voltage outputs such as Neon or other cold cathode. */ +#define E120_PRODUCT_CATEGORY_DIMMER_AC_NONDIM 0x0504 /* Non-Dim module in dimmer rack. */ +#define E120_PRODUCT_CATEGORY_DIMMER_AC_ELV 0x0505 /* AC <= 50V such as 12/24V AC Low voltage lamps. */ +#define E120_PRODUCT_CATEGORY_DIMMER_AC_OTHER 0x0506 +#define E120_PRODUCT_CATEGORY_DIMMER_DC_LEVEL 0x0507 /* Variable DC level output. */ +#define E120_PRODUCT_CATEGORY_DIMMER_DC_PWM 0x0508 /* Chopped (PWM) output. */ +#define E120_PRODUCT_CATEGORY_DIMMER_CS_LED 0x0509 /* Specialized LED dimmer. */ +#define E120_PRODUCT_CATEGORY_DIMMER_OTHER 0x05FF + +/* Power Control (other than Dimming equipment) */ +#define E120_PRODUCT_CATEGORY_POWER 0x0600 /* No Fine Category declared. */ +#define E120_PRODUCT_CATEGORY_POWER_CONTROL 0x0601 /* Contactor racks, other forms of Power Controllers. */ +#define E120_PRODUCT_CATEGORY_POWER_SOURCE 0x0602 /* Generators */ +#define E120_PRODUCT_CATEGORY_POWER_OTHER 0x06FF + +/* Scenic Drive - including motorized effects unrelated to light source. */ +#define E120_PRODUCT_CATEGORY_SCENIC 0x0700 /* No Fine Category declared */ +#define E120_PRODUCT_CATEGORY_SCENIC_DRIVE 0x0701 /* Rotators / Kabuki drops, etc. See Note 2. */ +#define E120_PRODUCT_CATEGORY_SCENIC_OTHER 0x07FF + +/* DMX Infrastructure, conversion and interfaces */ +#define E120_PRODUCT_CATEGORY_DATA 0x0800 /* No Fine Category declared. */ +#define E120_PRODUCT_CATEGORY_DATA_DISTRIBUTION 0x0801 /* Splitters/repeaters/Ethernet products used to distribute DMX*/ +#define E120_PRODUCT_CATEGORY_DATA_CONVERSION 0x0802 /* Protocol Conversion analog decoders. */ +#define E120_PRODUCT_CATEGORY_DATA_OTHER 0x08FF + +/* Audio-Visual Equipment */ +#define E120_PRODUCT_CATEGORY_AV 0x0900 /* No Fine Category declared. */ +#define E120_PRODUCT_CATEGORY_AV_AUDIO 0x0901 /* Audio controller or device. */ +#define E120_PRODUCT_CATEGORY_AV_VIDEO 0x0902 /* Video controller or display device. */ +#define E120_PRODUCT_CATEGORY_AV_OTHER 0x09FF + +/* Parameter Monitoring Equipment See Note 3. */ +#define E120_PRODUCT_CATEGORY_MONITOR 0x0A00 /* No Fine Category declared. */ +#define E120_PRODUCT_CATEGORY_MONITOR_ACLINEPOWER 0x0A01 /* Product that monitors AC line voltage, current or power. */ +#define E120_PRODUCT_CATEGORY_MONITOR_DCPOWER 0x0A02 /* Product that monitors DC line voltage, current or power. */ +#define E120_PRODUCT_CATEGORY_MONITOR_ENVIRONMENTAL 0x0A03 /* Temperature or other environmental parameter. */ +#define E120_PRODUCT_CATEGORY_MONITOR_OTHER 0x0AFF + +/* Controllers, Backup devices */ +#define E120_PRODUCT_CATEGORY_CONTROL 0x7000 /* No Fine Category declared. */ +#define E120_PRODUCT_CATEGORY_CONTROL_CONTROLLER 0x7001 +#define E120_PRODUCT_CATEGORY_CONTROL_BACKUPDEVICE 0x7002 +#define E120_PRODUCT_CATEGORY_CONTROL_OTHER 0x70FF + +/* Test Equipment */ +#define E120_PRODUCT_CATEGORY_TEST 0x7100 /* No Fine Category declared. */ +#define E120_PRODUCT_CATEGORY_TEST_EQUIPMENT 0x7101 +#define E120_PRODUCT_CATEGORY_TEST_EQUIPMENT_OTHER 0x71FF + +/* Miscellaneous */ +#define E120_PRODUCT_CATEGORY_OTHER 0x7FFF /* For devices that aren't described within this table. */ + +/* Manufacturer Specific Categories 0x8000 - + 0xDFFF */ + + +/********************************************************/ +/* Table A-6: Product Detail Defines */ +/********************************************************/ + +#define E120_PRODUCT_DETAIL_NOT DECLARED 0x0000 + +/* Generally applied to fixtures */ +#define E120_PRODUCT_DETAIL_ARC 0x0001 +#define E120_PRODUCT_DETAIL_METAL_HALIDE 0x0002 +#define E120_PRODUCT_DETAIL_INCANDESCENT 0x0003 +#define E120_PRODUCT_DETAIL_LED 0x0004 +#define E120_PRODUCT_DETAIL_FLUROESCENT 0x0005 +#define E120_PRODUCT_DETAIL_COLDCATHODE 0x0006 /*includes Neon/Argon */ +#define E120_PRODUCT_DETAIL_ELECTROLUMINESCENT 0x0007 +#define E120_PRODUCT_DETAIL_LASER 0x0008 +#define E120_PRODUCT_DETAIL_FLASHTUBE 0x0009 /* Strobes or other flashtubes */ + +/* Generally applied to fixture accessories */ +#define E120_PRODUCT_DETAIL_COLORSCROLLER 0x0100 +#define E120_PRODUCT_DETAIL_COLORWHEEL 0x0101 +#define E120_PRODUCT_DETAIL_COLORCHANGE 0x0102 /* Semaphore or other type */ +#define E120_PRODUCT_DETAIL_IRIS_DOUSER 0x0103 +#define E120_PRODUCT_DETAIL_DIMMING_SHUTTER 0x0104 +#define E120_PRODUCT_DETAIL_PROFILE_SHUTTER 0x0105 /* hard-edge beam masking */ +#define E120_PRODUCT_DETAIL_BARNDOOR_SHUTTER 0x0106 /* soft-edge beam masking */ +#define E120_PRODUCT_DETAIL_EFFECTS_DISC 0x0107 +#define E120_PRODUCT_DETAIL_GOBO_ROTATOR 0x0108 + +/* Generally applied to Projectors */ +#define E120_PRODUCT_DETAIL_VIDEO 0x0200 +#define E120_PRODUCT_DETAIL_SLIDE 0x0201 +#define E120_PRODUCT_DETAIL_FILM 0x0202 +#define E120_PRODUCT_DETAIL_OILWHEEL 0x0203 +#define E120_PRODUCT_DETAIL_LCDGATE 0x0204 + +/* Generally applied to Atmospheric Effects */ +#define E120_PRODUCT_DETAIL_FOGGER_GLYCOL 0x0300 /* Glycol/Glycerin hazer */ +#define E120_PRODUCT_DETAIL_FOGGER_MINERALOIL 0x0301 /* White Mineral oil hazer */ +#define E120_PRODUCT_DETAIL_FOGGER_WATER 0x0302 /* Water hazer */ +#define E120_PRODUCT_DETAIL_C02 0x0303 /* Dry Ice/Carbon Dioxide based */ +#define E120_PRODUCT_DETAIL_LN2 0x0304 /* Nitrogen based */ +#define E120_PRODUCT_DETAIL_BUBBLE 0x0305 /* including foam */ +#define E120_PRODUCT_DETAIL_FLAME_PROPANE 0x0306 +#define E120_PRODUCT_DETAIL_FLAME_OTHER 0x0307 +#define E120_PRODUCT_DETAIL_OLEFACTORY_STIMULATOR 0x0308 /* Scents */ +#define E120_PRODUCT_DETAIL_SNOW 0x0309 +#define E120_PRODUCT_DETAIL_WATER_JET 0x030A /* Fountain controls etc */ +#define E120_PRODUCT_DETAIL_WIND 0x030B /* Air Mover */ +#define E120_PRODUCT_DETAIL_CONFETTI 0x030C +#define E120_PRODUCT_DETAIL_HAZARD 0x030D /* Any form of pyrotechnic control or device. */ + +/* Generally applied to Dimmers/Power controllers See Note 1 */ +#define E120_PRODUCT_DETAIL_PHASE_CONTROL 0x0400 +#define E120_PRODUCT_DETAIL_REVERSE_PHASE_CONTROL 0x0401 /* includes FET/IGBT */ +#define E120_PRODUCT_DETAIL_SINE 0x0402 +#define E120_PRODUCT_DETAIL_PWM 0x0403 +#define E120_PRODUCT_DETAIL_DC 0x0404 /* Variable voltage */ +#define E120_PRODUCT_DETAIL_HFBALLAST 0x0405 /* for Fluroescent */ +#define E120_PRODUCT_DETAIL_HFHV_NEONBALLAST 0x0406 /* for Neon/Argon and other coldcathode. */ +#define E120_PRODUCT_DETAIL_HFHV_EL 0x0407 /* for Electroluminscent */ +#define E120_PRODUCT_DETAIL_MHR_BALLAST 0x0408 /* for Metal Halide */ +#define E120_PRODUCT_DETAIL_BITANGLE_MODULATION 0x0409 +#define E120_PRODUCT_DETAIL_FREQUENCY_MODULATION 0x040A +#define E120_PRODUCT_DETAIL_HIGHFREQUENCY_12V 0x040B /* as commonly used with MR16 lamps */ +#define E120_PRODUCT_DETAIL_RELAY_MECHANICAL 0x040C /* See Note 1 */ +#define E120_PRODUCT_DETAIL_RELAY_ELECTRONIC 0x040D /* See Note 1, Note 2 */ +#define E120_PRODUCT_DETAIL_SWITCH_ELECTRONIC 0x040E /* See Note 1, Note 2 */ +#define E120_PRODUCT_DETAIL_CONTACTOR 0x040F /* See Note 1 */ + +/* Generally applied to Scenic drive */ +#define E120_PRODUCT_DETAIL_MIRRORBALL_ROTATOR 0x0500 +#define E120_PRODUCT_DETAIL_OTHER_ROTATOR 0x0501 /* includes turntables */ +#define E120_PRODUCT_DETAIL_KABUKI_DROP 0x0502 +#define E120_PRODUCT_DETAIL_CURTAIN 0x0503 /* flown or traveller */ +#define E120_PRODUCT_DETAIL_LINESET 0x0504 +#define E120_PRODUCT_DETAIL_MOTOR_CONTROL 0x0505 +#define E120_PRODUCT_DETAIL_DAMPER_CONTROL 0x0506 /* HVAC Damper */ + +/* Generally applied to Data Distribution */ +#define E120_PRODUCT_DETAIL_SPLITTER 0x0600 /* Includes buffers/repeaters */ +#define E120_PRODUCT_DETAIL_ETHERNET_NODE 0x0601 /* DMX512 to/from Ethernet */ +#define E120_PRODUCT_DETAIL_MERGE 0x0602 /* DMX512 combiner */ +#define E120_PRODUCT_DETAIL_DATAPATCH 0x0603 /* Electronic Datalink Patch */ +#define E120_PRODUCT_DETAIL_WIRELESS_LINK 0x0604 /* radio/infrared */ + +/* Generally applied to Data Conversion and Interfaces */ +#define E120_PRODUCT_DETAIL_PROTOCOL_CONVERTOR 0x0701 /* D54/AMX192/Non DMX serial links, etc to/from DMX512 */ +#define E120_PRODUCT_DETAIL_ANALOG_DEMULTIPLEX 0x0702 /* DMX to DC voltage */ +#define E120_PRODUCT_DETAIL_ANALOG_MULTIPLEX 0x0703 /* DC Voltage to DMX */ +#define E120_PRODUCT_DETAIL_SWITCH_PANEL 0x0704 /* Pushbuttons to DMX or polled using RDM */ + +/* Generally applied to Audio or Video (AV) devices */ +#define E120_PRODUCT_DETAIL_ROUTER 0x0800 /* Switching device */ +#define E120_PRODUCT_DETAIL_FADER 0x0801 /* Single channel */ +#define E120_PRODUCT_DETAIL_MIXER 0x0802 /* Multi-channel */ + +/* Generally applied to Controllers, Backup devices and Test Equipment */ +#define E120_PRODUCT_DETAIL_CHANGEOVER_MANUAL 0x0900 /* requires manual intervention to assume control of DMX line */ +#define E120_PRODUCT_DETAIL_CHANGEOVER_AUTO 0x0901 /* may automatically assume control of DMX line */ +#define E120_PRODUCT_DETAIL_TEST 0x0902 /* test equipment */ + +/* Could be applied to any category */ +#define E120_PRODUCT_DETAIL_GFI_RCD 0x0A00 /* device includes GFI/RCD trip */ +#define E120_PRODUCT_DETAIL_BATTERY 0x0A01 /* device is battery operated */ +#define E120_PRODUCT_DETAIL_CONTROLLABLE_BREAKER 0x0A02 + + +#define E120_PRODUCT_DETAIL_OTHER 0x7FFF /* for use where the Manufacturer believes that none of the + defined details apply. */ +/* Manufacturer Specific Types 0x8000- + 0xDFFF */ + +/* Note 1: Products intended for switching 50V AC / 120V DC or greater should be declared with a + Product Category of PRODUCT_CATEGORY_POWER_CONTROL. + + Products only suitable for extra low voltage switching (typically up to 50VAC / 30VDC) at currents + less than 1 ampere should be declared with a Product Category of PRODUCT_CATEGORY_DATA_CONVERSION. + + Please refer to GET: DEVICE_INFO and Table A-5 for an explanation of Product Category declaration. + Note 2: Products with TTL, MOSFET or Open Collector Transistor Outputs or similar non-isolated electronic + outputs should be declared as PRODUCT_DETAIL_SWITCH_ELECTRONIC. Use of PRODUCT_DETAIL_RELAY_ELECTRONIC + shall be restricted to devices whereby the switched circuits are electrically isolated from the control signals. */ + + +/********************************************************/ +/* Table A-7: Preset Playback Defines */ +/********************************************************/ + +#define E120_PRESET_PLAYBACK_OFF 0x0000 /* Returns to Normal DMX512 Input */ +#define E120_PRESET_PLAYBACK_ALL 0xFFFF /* Plays Scenes in Sequence if supported. */ +/* E120_PRESET_PLAYBACK_SCENE 0x0001- + 0xFFFE Plays individual Scene # */ + +/********************************************************/ +/* Table A-8: Lamp State Defines */ +/********************************************************/ + +#define E120_LAMP_OFF 0x00 /* No demonstrable light output */ +#define E120_LAMP_ON 0x01 +#define E120_LAMP_STRIKE 0x02 /* Arc-Lamp ignite */ +#define E120_LAMP_STANDBY 0x03 /* Arc-Lamp Reduced Power Mode */ +#define E120_LAMP_NOT_PRESENT 0x04 /* Lamp not installed */ +#define E120_LAMP_ERROR 0x7F +/* Manufacturer-Specific States 0x80- + 0xDF */ + +/********************************************************/ +/* Table A-9: Lamp On Mode Defines */ +/********************************************************/ + +#define E120_LAMP_ON_MODE_OFF 0x00 /* Lamp Stays off until directly instructed to Strike. */ +#define E120_LAMP_ON_MODE_DMX 0x01 /* Lamp Strikes upon receiving a DMX512 signal. */ +#define E120_LAMP_ON_MODE_ON 0x02 /* Lamp Strikes automatically at Power-up. */ +#define E120_LAMP_ON_MODE_AFTER_CAL 0x03 /* Lamp Strikes after Calibration or Homing procedure. */ +/* Manufacturer-Specific Modes 0x80- + 0xDF */ + +/********************************************************/ +/* Table A-10: Self Test Defines */ +/********************************************************/ + +#define E120_SELF_TEST_OFF 0x00 /* Turns Self Tests Off */ +/* Manufacturer Tests 0x01- + 0xFE Various Manufacturer Self Tests */ +#define E120_SELF_TEST_ALL 0xFF /* Self Test All, if applicable */ + +/********************************************************/ +/* Table A-11: Power State Defines */ +/********************************************************/ + +#define E120_POWER_STATE_FULL_OFF 0x00 /* Completely disengages power to device. Device can no longer respond. */ +#define E120_POWER_STATE_SHUTDOWN 0x01 /* Reduced power mode, may require device reset to return to + normal operation. Device still responds to messages. */ +#define E120_POWER_STATE_STANDBY 0x02 /* Reduced power mode. Device can return to NORMAL without a + reset. Device still responds to messages. */ +#define E120_POWER_STATE_NORMAL 0xFF /* Normal Operating Mode. */ + +/********************************************************/ +/* Table A-12: Sensor Type Defines */ +/********************************************************/ + +#define E120_SENS_TEMPERATURE 0x00 +#define E120_SENS_VOLTAGE 0x01 +#define E120_SENS_CURRENT 0x02 +#define E120_SENS_FREQUENCY 0x03 +#define E120_SENS_RESISTANCE 0x04 /* Eg: Cable resistance */ +#define E120_SENS_POWER 0x05 +#define E120_SENS_MASS 0x06 /* Eg: Truss load Cell */ +#define E120_SENS_LENGTH 0x07 +#define E120_SENS_AREA 0x08 +#define E120_SENS_VOLUME 0x09 /* Eg: Smoke Fluid */ +#define E120_SENS_DENSITY 0x0A +#define E120_SENS_VELOCITY 0x0B +#define E120_SENS_ACCELERATION 0x0C +#define E120_SENS_FORCE 0x0D +#define E120_SENS_ENERGY 0x0E +#define E120_SENS_PRESSURE 0x0F +#define E120_SENS_TIME 0x10 +#define E120_SENS_ANGLE 0x11 +#define E120_SENS_POSITION_X 0x12 /* E.g.: Lamp position on Truss */ +#define E120_SENS_POSITION_Y 0x13 +#define E120_SENS_POSITION_Z 0x14 +#define E120_SENS_ANGULAR_VELOCITY 0x15 /* E.g.: Wind speed */ +#define E120_SENS_LUMINOUS_INTENSITY 0x16 +#define E120_SENS_LUMINOUS_FLUX 0x17 +#define E120_SENS_ILLUMINANCE 0x18 +#define E120_SENS_CHROMINANCE_RED 0x19 +#define E120_SENS_CHROMINANCE_GREEN 0x1A +#define E120_SENS_CHROMINANCE_BLUE 0x1B +#define E120_SENS_CONTACTS 0x1C /* E.g.: Switch inputs. */ +#define E120_SENS_MEMORY 0x1D /* E.g.: ROM Size */ +#define E120_SENS_ITEMS 0x1E /* E.g.: Scroller gel frames. */ +#define E120_SENS_HUMIDITY 0x1F +#define E120_SENS_COUNTER_16BIT 0x20 +#define E120_SENS_OTHER 0x7F +/* Manufacturer-Specific Sensors 0x80- + 0xFF */ + +/********************************************************/ +/* Table A-13: Sensor Unit Defines */ +/********************************************************/ + +#define E120_UNITS_NONE 0x00 /* CONTACTS */ +#define E120_UNITS_CENTIGRADE 0x01 /* TEMPERATURE */ +#define E120_UNITS_VOLTS_DC 0x02 /* VOLTAGE */ +#define E120_UNITS_VOLTS_AC_PEAK 0x03 /* VOLTAGE */ +#define E120_UNITS_VOLTS_AC_RMS 0x04 /* VOLTAGE */ +#define E120_UNITS_AMPERE_DC 0x05 /* CURRENT */ +#define E120_UNITS_AMPERE_AC_PEAK 0x06 /* CURRENT */ +#define E120_UNITS_AMPERE_AC_RMS 0x07 /* CURRENT */ +#define E120_UNITS_HERTZ 0x08 /* FREQUENCY / ANG_VEL */ +#define E120_UNITS_OHM 0x09 /* RESISTANCE */ +#define E120_UNITS_WATT 0x0A /* POWER */ +#define E120_UNITS_KILOGRAM 0x0B /* MASS */ +#define E120_UNITS_METERS 0x0C /* LENGTH / POSITION */ +#define E120_UNITS_METERS_SQUARED 0x0D /* AREA */ +#define E120_UNITS_METERS_CUBED 0x0E /* VOLUME */ +#define E120_UNITS_KILOGRAMMES_PER_METER_CUBED 0x0F /* DENSITY */ +#define E120_UNITS_METERS_PER_SECOND 0x10 /* VELOCITY */ +#define E120_UNITS_METERS_PER_SECOND_SQUARED 0x11 /* ACCELERATION */ +#define E120_UNITS_NEWTON 0x12 /* FORCE */ +#define E120_UNITS_JOULE 0x13 /* ENERGY */ +#define E120_UNITS_PASCAL 0x14 /* PRESSURE */ +#define E120_UNITS_SECOND 0x15 /* TIME */ +#define E120_UNITS_DEGREE 0x16 /* ANGLE */ +#define E120_UNITS_STERADIAN 0x17 /* ANGLE */ +#define E120_UNITS_CANDELA 0x18 /* LUMINOUS_INTENSITY */ +#define E120_UNITS_LUMEN 0x19 /* LUMINOUS_FLUX */ +#define E120_UNITS_LUX 0x1A /* ILLUMINANCE */ +#define E120_UNITS_IRE 0x1B /* CHROMINANCE */ +#define E120_UNITS_BYTE 0x1C /* MEMORY */ +/* Manufacturer-Specific Units 0x80- + 0xFF */ + + +/********************************************************/ +/* Table A-14: Sensor Unit Prefix Defines */ +/********************************************************/ + +#define E120_PREFIX_NONE 0x00 /* Multiply by 1 */ +#define E120_PREFIX_DECI 0x01 /* Multiply by 10-1 */ +#define E120_PREFIX_CENTI 0x02 /* Multiply by 10-2 */ +#define E120_PREFIX_MILLI 0x03 /* Multiply by 10-3 */ +#define E120_PREFIX_MICRO 0x04 /* Multiply by 10-6 */ +#define E120_PREFIX_NANO 0x05 /* Multiply by 10-9 */ +#define E120_PREFIX_PICO 0x06 /* Multiply by 10-12 */ +#define E120_PREFIX_FEMPTO 0x07 /* Multiply by 10-15 */ +#define E120_PREFIX_ATTO 0x08 /* Multiply by 10-18 */ +#define E120_PREFIX_ZEPTO 0x09 /* Multiply by 10-21 */ +#define E120_PREFIX_YOCTO 0x0A /* Multiply by 10-24 */ +#define E120_PREFIX_DECA 0x11 /* Multiply by 10+1 */ +#define E120_PREFIX_HECTO 0x12 /* Multiply by 10+2 */ +#define E120_PREFIX_KILO 0x13 /* Multiply by 10+3 */ +#define E120_PREFIX_MEGA 0x14 /* Multiply by 10+6 */ +#define E120_PREFIX_GIGA 0x15 /* Multiply by 10+9 */ +#define E120_PREFIX_TERRA 0x16 /* Multiply by 10+12 */ +#define E120_PREFIX_PETA 0x17 /* Multiply by 10+15 */ +#define E120_PREFIX_EXA 0x18 /* Multiply by 10+18 */ +#define E120_PREFIX_ZETTA 0x19 /* Multiply by 10+21 */ +#define E120_PREFIX_YOTTA 0x1A /* Multiply by 10+24 */ + + +/********************************************************/ +/* Table A-15: Data Type Defines */ +/********************************************************/ + +#define E120_DS_NOT_DEFINED 0x00 /* Data type is not defined */ +#define E120_DS_BIT_FIELD 0x01 /* Data is bit packed */ +#define E120_DS_ASCII 0x02 /* Data is a string */ +#define E120_DS_UNSIGNED_BYTE 0x03 /* Data is an array of unsigned bytes */ +#define E120_DS_SIGNED_BYTE 0x04 /* Data is an array of signed bytes */ +#define E120_DS_UNSIGNED_WORD 0x05 /* Data is an array of unsigned 16-bit words */ +#define E120_DS_SIGNED_WORD 0x06 /* Data is an array of signed 16-bit words */ +#define E120_DS_UNSIGNED_DWORD 0x07 /* Data is an array of unsigned 32-bit words */ +#define E120_DS_SIGNED_DWORD 0x08 /* Data is an array of signed 32-bit words */ +/* Manufacturer-Specific Data Types 0x80- */ +/* 0xDF */ + +/********************************************************/ +/* Table A-16: Parameter Desc. Command Class Defines */ +/********************************************************/ + +#define E120_CC_GET 0x01 /* PID supports GET only */ +#define E120_CC_SET 0x02 /* PID supports SET only */ +#define E120_CC_GET_SET 0x03 /* PID supports GET & SET */ + +/********************************************************/ +/* Table A-17: Response NACK Reason Code Defines */ +/********************************************************/ + +#define E120_NR_UNKNOWN_PID 0x0000 /* The responder cannot comply with request because the message + is not implemented in responder. */ +#define E120_NR_FORMAT_ERROR 0x0001 /* The responder cannot interpret request as controller data + was not formatted correctly. */ +#define E120_NR_HARDWARE_FAULT 0x0002 /* The responder cannot comply due to an internal hardware fault*/ +#define E120_NR_PROXY_REJECT 0x0003 /* Proxy is not the RDM line master and cannot comply with message.*/ +#define E120_NR_WRITE_PROTECT 0x0004 /* SET Command normally allowed but being blocked currently. */ +#define E120_NR_UNSUPPORTED_COMMAND_CLASS 0x0005 /* Not valid for Command Class attempted. May be used where + GET allowed but SET is not supported. */ +#define E120_NR_DATA_OUT_OF_RANGE 0x0006 /* Value for given Parameter out of allowable range or + not supported. */ +#define E120_NR_BUFFER_FULL 0x0007 /* Buffer or Queue space currently has no free space to store data. */ +#define E120_NR_PACKET_SIZE_UNSUPPORTED 0x0008 /* Incoming message exceeds buffer capacity. */ +#define E120_NR_SUB_DEVICE_OUT_OF_RANGE 0x0009 /* Sub-Device is out of range or unknown. */ +#define E120_NR_PROXY_BUFFER_FULL 0x000A /* Proxy buffer is full and can not store any more Queued */ + /* Message or Status Message responses. */ +#define E137_2_NR_ACTION_NOT_SUPPORTED 0x000B /* The parameter data is valid but the SET operation cannot be */ + /* performed with the current configuration. */ + +/********************************************************************************************************************************/ +/********************************************************************************************************************************/ +/* ANSI E1.37-1 DEFINES */ +/********************************************************************************************************************************/ +/********************************************************************************************************************************/ + +/********************************************************/ +/* E1.37-1 Table A-2: Preset Programmed Defines */ +/********************************************************/ +#define E137_1_PRESET_NOT_PROGRAMMED 0x00 /* Preset Scene not programmed. */ +#define E137_1_PRESET_PROGRAMMED 0x01 /* Preset Scene programmed. */ +#define E137_1_PRESET_PROGRAMMED_READ_ONLY 0x02 /* Preset Scene read-only, factory programmed. */ + +/********************************************************/ +/* E1.37-1 Table A-3: Merge Mode Defines */ +/********************************************************/ +#define E137_1_MERGEMODE_DEFAULT 0x00 /* Preset overrides DMX512 default behavior as defined in */ + /* E1.20 PRESET_PLAYBACK */ +#define E137_1_MERGEMODE_HTP 0x01 /* Highest Takes Precedence on slot by slot basis */ +#define E137_1_MERGEMODE_LTP 0x02 /* Latest Takes Precedence from Preset or DMX512 on slot by slot */ +#define E137_1_MERGEMODE_DMX_ONLY 0x03 /* DMX512 only, Preset ignored */ +#define E137_1_MERGEMODE_OTHER 0xFF /* Other (undefined) merge mode */ + + +/********************************************************************************************************************************/ +/********************************************************************************************************************************/ +/* ANSI E1.37-2 DEFINES */ +/********************************************************************************************************************************/ +/********************************************************************************************************************************/ + +/********************************************************/ +/* E1.37-2 Table A-3: DHCP Mode Defines */ +/********************************************************/ +#define E137_2_DHCP_MODE_INACTIVE 0x00 /* IP Address was not obtained via DHCP */ +#define E137_2_DHCP_MODE_ACTIVE 0x01 /* IP Address was obtained via DHCP */ +#define E137_2_DHCP_MODE_UNKNOWN 0x02 /* The system cannot determine if address was obtained via DHCP. */ + + +#endif