Nick Pinson

Activity

Reply to Teensy 3.1 - Sounds a bit like the "Sy" board from the "Teen" and "Sy" (split teensy) project.
Nick Pinson - 05 Oct 2015
Reply to Teensy 3.1 - Paul - since the barebones board doesn't use the on board regulator, is the low …
Nick Pinson - 04 Oct 2015
Reply to Teensy 3.1 - Paul - awesome work with the project board! Do you have a schematic you're willing …
Nick Pinson - 29 Sep 2015
Reply to Teensy 3.1 - Code compiled offline (GCC) flashes just fine. .hex files downloaded from the online compiler still …
Nick Pinson - 29 Aug 2015
Reply to Teensy 3.1 - I tried testing on a black masked teensy after getting the HID example working a …
Nick Pinson - 29 Aug 2015
Reply to Teensy 3.1 - I changed the call to hid.send() to be non-blocking (hid.sendNB()). It blinks merrily now, babbling …
Nick Pinson - 29 Aug 2015
Reply to Teensy 3.1 - Huh. dmesg told the following story on Ubuntu: [79800.692944] usb 3-2: new full-speed USB device …
Nick Pinson - 29 Aug 2015
Reply to Teensy 3.1 - I can try on a Windows machine on Monday. I did try the HID example …
Nick Pinson - 29 Aug 2015
Reply to Teensy 3.1 - Tried a simple HID implementation, stripping down the extant HID sample code. Freezes at call …
Nick Pinson - 27 Aug 2015
Reply to Teensy 3.1 - Disregard. It's working now. I thought the clock setting had been changed in mbed-src in …
Nick Pinson - 27 Aug 2015
Reply to Teensy 3.1 - Tried the RTC example. I don't have a 32.2KHz crystal installed. I get nothing. No …
Nick Pinson - 27 Aug 2015
Reply to Teensy 3.1 - Paul, the clock tweaks definitely seem to have resolved my issues. So far so good.
Nick Pinson - 27 Aug 2015
Reply to Teensy 3.1 - Great progress! Old and new flash with no issue (.hex via teensy_loader_cli). Program behavior on …
Nick Pinson - 27 Aug 2015
Reply to Teensy 3.1 - I tried blinky with no USB. No luck; same behavior as before on both old …
Nick Pinson - 27 Aug 2015
Reply to Teensy 3.1 - I think the only way to reliably way to distiguish "old" from "new" would be …
Nick Pinson - 27 Aug 2015
Reply to Teensy 3.1 - Tried with a fresh Teensy 3.1 from PJRC (received Aug 2015; has green solder mask …
Nick Pinson - 26 Aug 2015