Revision 0:9e3d8cb294c5, committed 2018-05-11

Comitter:

nenad

Date:

Fri May 11 15:42:03 2018 +0000

Commit message:

PMK2018;

Changed in this revision

diff -r 000000000000 -r 9e3d8cb294c5 .gitignore
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/.gitignore	Fri May 11 15:42:03 2018 +0000
@@ -0,0 +1,4 @@
+.build
+.mbed
+projectfiles
+*.py*

diff -r 000000000000 -r 9e3d8cb294c5 README.md
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/README.md	Fri May 11 15:42:03 2018 +0000
@@ -0,0 +1,87 @@
+# Getting started with Blinky on mbed OS
+
+This guide reviews the steps required to get Blinky working on an mbed OS platform.
+
+Please install [mbed CLI](https://github.com/ARMmbed/mbed-cli#installing-mbed-cli).
+
+## Import the example application
+
+From the command-line, import the example:
+
+```
+mbed import mbed-os-example-blinky
+cd mbed-os-example-blinky
+```
+
+### Now compile
+
+Invoke `mbed compile`, and specify the name of your platform and your favorite toolchain (`GCC_ARM`, `ARM`, `IAR`). For example, for the ARM Compiler 5:
+
+```
+mbed compile -m K64F -t ARM
+```
+
+Your PC may take a few minutes to compile your code. At the end, you see the following result:
+
+```
+[snip]
++----------------------------+-------+-------+------+
+| Module                     | .text | .data | .bss |
++----------------------------+-------+-------+------+
+| Misc                       | 13939 |    24 | 1372 |
+| core/hal                   | 16993 |    96 |  296 |
+| core/rtos                  |  7384 |    92 | 4204 |
+| features/FEATURE_IPV4      |    80 |     0 |  176 |
+| frameworks/greentea-client |  1830 |    60 |   44 |
+| frameworks/utest           |  2392 |   512 |  292 |
+| Subtotals                  | 42618 |   784 | 6384 |
++----------------------------+-------+-------+------+
+Allocated Heap: unknown
+Allocated Stack: unknown
+Total Static RAM memory (data + bss): 7168 bytes
+Total RAM memory (data + bss + heap + stack): 7168 bytes
+Total Flash memory (text + data + misc): 43402 bytes
+Image: .\.build\K64F\ARM\mbed-os-example-blinky.bin
+```
+
+### Program your board
+
+1. Connect your mbed device to the computer over USB.
+1. Copy the binary file to the mbed device.
+1. Press the reset button to start the program.
+
+The LED on your platform turns on and off.
+
+## Export the project to Keil MDK, and debug your application
+
+From the command-line, run the following command:
+
+```
+mbed export -m K64F -i uvision
+```
+
+To debug the application:
+
+1. Start uVision.
+1. Import the uVision project generated earlier.
+1. Compile your application, and generate an `.axf` file.
+1. Make sure uVision is configured to debug over CMSIS-DAP (From the Project menu > Options for Target '...' > Debug tab > Use CMSIS-DAP Debugger).
+1. Set breakpoints, and start a debug session.
+
+![Image of uVision](img/uvision.png)
+
+## Troubleshooting
+
+1. Make sure `mbed-cli` is working correctly and its version is `>1.0.0`
+
+ ```
+ mbed --version
+ ```
+
+ If not, you can update it:
+
+ ```
+ pip install mbed-cli --upgrade
+ ```
+
+2. If using Keil MDK, make sure you have a license installed. [MDK-Lite](http://www.keil.com/arm/mdk.asp) has a 32 KB restriction on code size.
\ No newline at end of file

diff -r 000000000000 -r 9e3d8cb294c5 img/uvision.png
Binary file img/uvision.png has changed

diff -r 000000000000 -r 9e3d8cb294c5 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Fri May 11 15:42:03 2018 +0000
@@ -0,0 +1,40 @@
+#if !FEATURE_LWIP
+    #error [NOT_SUPPORTED] LWIP not supported for this target
+#endif
+
+#include "mbed.h"
+#include "EthernetInterface.h"
+#include "TCPServer.h"
+#include "TCPSocket.h"
+
+int main()
+{
+    printf("Basic TCP server example\n");
+    
+    EthernetInterface eth;
+    eth.connect();
+    
+    printf("The target IP address is '%s'\n", eth.get_ip_address());
+    
+    TCPServer srv;
+    TCPSocket clt_sock;
+    SocketAddress clt_addr;
+    
+    /* Open the server on ethernet stack */
+    srv.open(&eth);
+    
+    /* Bind the HTTP port (TCP 80) to the server */
+    srv.bind(eth.get_ip_address(), 80);
+    
+    /* Can handle 5 simultaneous connections */
+    srv.listen(5);
+    
+    while (true) {
+        srv.accept(&clt_sock, &clt_addr);
+        printf("accept %s:%d\n", clt_addr.get_ip_address(), clt_addr.get_port());
+        char rbuffer[64];
+        int rcount = clt_sock.recv(rbuffer, sizeof rbuffer);
+        printf("received data %s\n", rbuffer);
+        clt_sock.send(rbuffer, rcount);
+    }
+}
\ No newline at end of file

diff -r 000000000000 -r 9e3d8cb294c5 mbed-os.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os.lib	Fri May 11 15:42:03 2018 +0000
@@ -0,0 +1,1 @@
+https://github.com/ARMmbed/mbed-os/#3179b1cffddea0f0feed1dd551b0e7dc946c12f5