Diff: Drivers/SSD1306_SPI.cpp

Revision:

1:f7003ec66a51

Child:

2:bbfc18022ee5

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Drivers/SSD1306_SPI.cpp	Fri Mar 14 19:17:44 2014 +0000
@@ -0,0 +1,147 @@
+/* NeatGUI Library
+ * Copyright (c) 2013 Neil Thiessen
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "SSD1306_SPI.h"
+
+SSD1306_SPI::SSD1306_SPI(PinName mosi, PinName miso, PinName sclk, PinName cs, PinName dc) : Display(128, 64), m_SPI(mosi, miso, sclk), m_CS(cs), m_DC(dc)
+{
+    //Deselect the display
+    m_CS = 1;
+
+    //Set the SPI format to 8 bit data, high steady state clock, second edge capture
+    m_SPI.format(8, 3);
+
+    //Set the SPI frequency to 10MHz
+    m_SPI.frequency(10000000);
+}
+
+bool SSD1306_SPI::open()
+{
+    //Init sequence for 128x64 OLED module
+    writeCommand(CMD_DISPLAYOFF);
+    writeCommand(CMD_SETDISPLAYCLOCKDIV);
+    writeCommand(0x80);
+    writeCommand(CMD_SETMULTIPLEX);
+    writeCommand(0x3F);
+    writeCommand(CMD_SETDISPLAYOFFSET);
+    writeCommand(0x0);
+    writeCommand(CMD_SETSTARTLINE | 0x0);
+    writeCommand(CMD_CHARGEPUMP);
+    writeCommand(CMD_CHARGEPUMPON);
+    writeCommand(CMD_MEMORYMODE);
+    writeCommand(0x00);
+    writeCommand(CMD_SEGREMAP | 0x1);
+    writeCommand(CMD_COMSCANDEC);
+    writeCommand(CMD_SETCOMPINS);
+    writeCommand(0x12);
+    writeCommand(CMD_SETCONTRAST);
+    writeCommand(0xCF);
+    writeCommand(CMD_SETPRECHARGE);
+    writeCommand(0xF1);
+    writeCommand(CMD_SETVCOMDETECT);
+    writeCommand(0x40);
+    writeCommand(CMD_DISPLAYALLON_RESUME);
+    writeCommand(CMD_NORMALDISPLAY);
+
+    //Return success
+    return true;
+}
+
+void SSD1306_SPI::finalize()
+{
+    //Select low col 0, hi col 0, line 0
+    writeCommand(CMD_SETLOWCOLUMN | 0x0);
+    writeCommand(CMD_SETHIGHCOLUMN | 0x0);
+    writeCommand(CMD_SETSTARTLINE | 0x0);
+
+    //Set DC to data and select the chip
+    m_DC = 1;
+    m_CS = 0;
+
+    //Write the entire buffer at once
+    for (int i = 0; i < 1024; i++)
+        m_SPI.write(m_Buffer[i]);
+
+    //Deselect the chip
+    m_CS = 1;
+}
+
+Display::State SSD1306_SPI::state()
+{
+    //Return the base class's state
+    return Display::state();
+}
+
+void SSD1306_SPI::state(State s)
+{
+    //Check what the requested state is
+    if (s == Display::DISPLAY_ON) {
+        //Turn the display on
+        writeCommand(CMD_DISPLAYON);
+    } else if (s == Display::DISPLAY_OFF) {
+        //Turn the display off
+        writeCommand(CMD_DISPLAYOFF);
+    }
+
+    //Update the base class
+    Display::state(s);
+}
+
+void SSD1306_SPI::drawPixel(int x, int y, unsigned int c)
+{
+    //Range check the pixel
+    if ((x < 0) || (x >= width()) || (y < 0) || (y >= height()))
+        return;
+
+    //Make sure the color is fully opaque
+    if ((c >> 24) != 255)
+        return;
+
+    //Determine the pixel byte index
+    unsigned short byteIndex = x + (y / 8) * width();
+
+    //Set or clear the pixel
+    if ((c & 0x00FFFFFF) > 0)
+        m_Buffer[byteIndex] |= (1 << (y % 8));
+    else
+        m_Buffer[byteIndex] &= ~(1 << (y % 8));
+}
+
+void SSD1306_SPI::writeCommand(char command)
+{
+    //Set DC to command and select the display
+    m_DC = 0;
+    m_CS = 0;
+
+    //Write the command byte
+    m_SPI.write(command);
+
+    //Deselect the display
+    m_CS = 1;
+}
+
+void SSD1306_SPI::writeData(char data)
+{
+    //Set DC to data and select the display
+    m_DC = 1;
+    m_CS = 0;
+
+    //Write the data byte
+    m_SPI.write(data);
+
+    //Deselect the display
+    m_CS = 1;
+}