[11U68]fix P0_11 to use GPIO
Fork of mbed-src by
Embed:
(wiki syntax)
Show/hide line numbers
BusInOut.h
00001 /* mbed Microcontroller Library 00002 * Copyright (c) 2006-2013 ARM Limited 00003 * 00004 * Licensed under the Apache License, Version 2.0 (the "License"); 00005 * you may not use this file except in compliance with the License. 00006 * You may obtain a copy of the License at 00007 * 00008 * http://www.apache.org/licenses/LICENSE-2.0 00009 * 00010 * Unless required by applicable law or agreed to in writing, software 00011 * distributed under the License is distributed on an "AS IS" BASIS, 00012 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 00013 * See the License for the specific language governing permissions and 00014 * limitations under the License. 00015 */ 00016 #ifndef MBED_BUSINOUT_H 00017 #define MBED_BUSINOUT_H 00018 00019 #include "DigitalInOut.h" 00020 00021 namespace mbed { 00022 00023 /** A digital input output bus, used for setting the state of a collection of pins 00024 */ 00025 class BusInOut { 00026 00027 public: 00028 00029 /** Create an BusInOut, connected to the specified pins 00030 * 00031 * @param p<n> DigitalInOut pin to connect to bus bit p<n> (p5-p30, NC) 00032 * 00033 * @note 00034 * It is only required to specify as many pin variables as is required 00035 * for the bus; the rest will default to NC (not connected) 00036 */ 00037 BusInOut(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC, 00038 PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC, 00039 PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC, 00040 PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC); 00041 00042 BusInOut(PinName pins[16]); 00043 00044 virtual ~BusInOut(); 00045 00046 /* Group: Access Methods */ 00047 00048 /** Write the value to the output bus 00049 * 00050 * @param value An integer specifying a bit to write for every corresponding DigitalInOut pin 00051 */ 00052 void write(int value); 00053 00054 /** Read the value currently output on the bus 00055 * 00056 * @returns 00057 * An integer with each bit corresponding to associated DigitalInOut pin setting 00058 */ 00059 int read(); 00060 00061 /** Set as an output 00062 */ 00063 void output(); 00064 00065 /** Set as an input 00066 */ 00067 void input(); 00068 00069 /** Set the input pin mode 00070 * 00071 * @param mode PullUp, PullDown, PullNone 00072 */ 00073 void mode(PinMode pull); 00074 00075 /** Binary mask of bus pins connected to actual pins (not NC pins) 00076 * If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1 00077 * 00078 * @returns 00079 * Binary mask of connected pins 00080 */ 00081 int mask() { 00082 return _nc_mask; 00083 } 00084 00085 #ifdef MBED_OPERATORS 00086 /** A shorthand for write() 00087 */ 00088 BusInOut& operator= (int v); 00089 BusInOut& operator= (BusInOut& rhs); 00090 00091 /** Access to particular bit in random-iterator fashion 00092 */ 00093 DigitalInOut& operator[] (int index); 00094 00095 /** A shorthand for read() 00096 */ 00097 operator int(); 00098 #endif 00099 00100 protected: 00101 DigitalInOut* _pin[16]; 00102 00103 /** Mask of bus's NC pins 00104 * If bit[n] is set to 1 - pin is connected 00105 * if bit[n] is cleared - pin is not connected (NC) 00106 */ 00107 int _nc_mask; 00108 00109 /* disallow copy constructor and assignment operators */ 00110 private: 00111 BusInOut(const BusInOut&); 00112 BusInOut & operator = (const BusInOut&); 00113 }; 00114 00115 } // namespace mbed 00116 00117 #endif
Generated on Tue Jul 12 2022 21:24:11 by 1.7.2