File content as of revision 30:1e9905bdfd15:

/*
 * Copyright (C)2010-2012 Henning Karlsen. All right reserved.
 * Copyright (C)2012-2013 Todor Todorov.
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, write to:
 *
 * Free Software Foundation, Inc.
 * 51 Franklin St, 5th Floor, Boston, MA 02110-1301, USA
 *
 *********************************************************************/
#include "ili9328.h"
#include "helpers.h"
#include "FastIO.h"

FastOut<P1_28> _D0;
FastOut<P2_3>  _D1;
FastOut<P1_18> _D2;
FastOut<P1_24> _D3;
FastOut<P1_19> _D4;
FastOut<P1_26> _D5;
FastOut<P1_27> _D6;
FastOut<P1_25> _D7;

ILI9328_LCD::ILI9328_LCD( PinName CS, PinName RESET, PinName RS, PinName WR, BusOut* DATA_PORT, PinName BL, PinName RD, backlight_t blType, float defaultBackLightLevel )
    : LCD( 240, 320, CS, RS, RESET, BL, blType, defaultBackLightLevel ), _lcd_pin_wr( WR )
{
    _lcd_port = DATA_PORT;
    if ( RD != NC ) _lcd_pin_rd = new DigitalOut( RD );
    else _lcd_pin_rd = 0;
}

void ILI9328_LCD::Initialize( orientation_t orientation, colordepth_t colors )
{
    _orientation = orientation;
    _colorDepth = colors;
    
    _lcd_pin_reset = HIGH;
    wait_ms( 50 );
    _lcd_pin_reset = LOW;
    wait_ms( 100 );
    _lcd_pin_reset = HIGH;
    wait_ms( 1000 );
    _lcd_pin_cs = HIGH;
    if ( _lcd_pin_bl != 0 )
        *_lcd_pin_bl = HIGH;
    else if ( _bl_pwm != 0 )
        *_bl_pwm = _bl_pwm_default;
    if ( _lcd_pin_rd != 0 )
        *_lcd_pin_rd = HIGH;
    _lcd_pin_wr = HIGH;
    wait_ms( 15 );
    
    Activate();
    
    short drivOut = 0;
    short entryMod = 0;
    short gateScan = 0x2700;
    switch ( _orientation )
    {
        case LANDSCAPE:
            drivOut = 0x0100;
            entryMod |= 0x0038;
            gateScan |= 0x0000;
            break;
            
        case LANDSCAPE_REV:
            drivOut = 0x0000;
            entryMod |= 0x0038;
            gateScan |= 0x8000;
            break;
            
        case PORTRAIT_REV:
            drivOut = 0x0000;
            entryMod |= 0x0030;
            gateScan |= 0x0000;
            break;
            
        case PORTRAIT:
        default:
            drivOut = 0x0100;
            entryMod |= 0x0030;
            gateScan |= 0x8000;
            break;
    }
    switch ( _colorDepth )
    {
        case RGB18:
            entryMod |= 0x9000;
            break;
            
        case RGB16:
        default:
            entryMod |= 0x1000;
            break;
    }

    WriteCmdData( ILI932X_DRIV_OUT_CTRL, drivOut ); // set Driver Output Control
    WriteCmdData( ILI932X_DRIV_WAV_CTRL, 0x0700 ); // set 1 line inversion
    WriteCmdData( ILI932X_ENTRY_MOD, entryMod ); // set GRAM write direction and BGR=1.
    WriteCmdData( ILI932X_RESIZE_CTRL, 0x0000 ); // Resize register
    WriteCmdData( ILI932X_DISP_CTRL2, 0x0202 ); // set the back porch and front porch
    WriteCmdData( ILI932X_DISP_CTRL3, 0x0000 ); // set non-display area refresh cycle ISC[3:0]
    WriteCmdData( ILI932X_DISP_CTRL4, 0x0000 ); // FMARK function
    WriteCmdData( ILI932X_RGB_DISP_IF_CTRL1, 0x0000 ); // RGB interface setting
    WriteCmdData( ILI932X_FRM_MARKER_POS, 0x0000 ); // Frame marker Position
    WriteCmdData( ILI932X_RGB_DISP_IF_CTRL2, 0x0000 ); // RGB interface polarity
    // ----------- Power On sequence ----------- //
    WriteCmdData( ILI932X_POW_CTRL1, 0x0000 ); // SAP, BT[3:0], AP, DSTB, SLP, STB
    WriteCmdData( ILI932X_POW_CTRL2, 0x0007 ); // DC1[2:0], DC0[2:0], VC[2:0]
    WriteCmdData( ILI932X_POW_CTRL3, 0x0000 ); // VREG1OUT voltage
    WriteCmdData( ILI932X_POW_CTRL4, 0x0000 ); // VDV[4:0] for VCOM amplitude
    wait_ms( 200 ); // Dis-charge capacitor power voltage
    WriteCmdData( ILI932X_POW_CTRL1, 0x1690 ); // SAP, BT[3:0], AP, DSTB, SLP, STB
    WriteCmdData( ILI932X_POW_CTRL2, 0x0227 ); // Set DC1[2:0], DC0[2:0], VC[2:0]
    wait_ms( 50 ); // Delay 50ms
    WriteCmdData( ILI932X_POW_CTRL3, 0x001A ); // 0012
    wait_ms( 50 ); // Delay 50ms
    WriteCmdData( ILI932X_POW_CTRL4, 0x1800 ); // VDV[4:0] for VCOM amplitude
    WriteCmdData( ILI932X_POW_CTRL7, 0x002A ); // 04  VCM[5:0] for VCOMH
    wait_ms( 50 ); // Delay 50ms
    WriteCmdData( ILI932X_GRAM_HOR_AD, 0x0000 ); // GRAM horizontal Address
    WriteCmdData( ILI932X_GRAM_VER_AD, 0x0000 ); // GRAM Vertical Address
    // ----------- Adjust the Gamma Curve ----------//
    WriteCmdData( ILI932X_GAMMA_CTRL1, 0x0000 );
    WriteCmdData( ILI932X_GAMMA_CTRL2, 0x0000 );
    WriteCmdData( ILI932X_GAMMA_CTRL3, 0x0000 );
    WriteCmdData( ILI932X_GAMMA_CTRL4, 0x0206 );
    WriteCmdData( ILI932X_GAMMA_CTRL5, 0x0808 );
    WriteCmdData( ILI932X_GAMMA_CTRL6, 0x0007 );
    WriteCmdData( ILI932X_GAMMA_CTRL7, 0x0201 );
    WriteCmdData( ILI932X_GAMMA_CTRL8, 0x0000 );
    WriteCmdData( ILI932X_GAMMA_CTRL9, 0x0000 );
    WriteCmdData( ILI932X_GAMMA_CTRL10, 0x0000 );
    //------------------ Set GRAM area ---------------//
    WriteCmdData( ILI932X_HOR_END_AD, 0x00EF ); // Horizontal GRAM End Address
    WriteCmdData( ILI932X_VER_START_AD, 0x0000 ); // Vertical GRAM Start Address
    WriteCmdData( ILI932X_VER_END_AD, 0x013F ); // Vertical GRAM Start Address
    WriteCmdData( ILI932X_GATE_SCAN_CTRL1, gateScan ); // Gate Scan Line (0xA700)
    WriteCmdData( ILI932X_GATE_SCAN_CTRL2, 0x0003 ); // NDL,VLE, REV
    WriteCmdData( ILI932X_GATE_SCAN_CTRL3, 0x0000 ); // set scrolling line
    //-------------- Panel Control -------------------//
    WriteCmdData( ILI932X_PANEL_IF_CTRL1, 0x0010 ); 
    WriteCmdData( ILI932X_PANEL_IF_CTRL2, 0x0000 );
    WriteCmdData( ILI932X_PANEL_IF_CTRL4, 0X1100 );
    WriteCmdData( ILI932X_DISP_CTRL1, 0x0133 ); // 262K color and display ON
    
    Deactivate();
}

void ILI9328_LCD::Sleep( void )
{
    Activate();
    WriteCmdData( 0x10, 0x1692 ); // enter sleep mode
    wait_ms( 200 );
    LCD::Sleep();
    Deactivate();
}

void ILI9328_LCD::WakeUp( void )
{
    Activate();
    WriteCmdData( 0x10, 0x1690 ); // exit sleep mode
    wait_ms( 200 );
    LCD::WakeUp();
    Deactivate();
}

//fix to 8bit mode
void ILI9328_LCD::WriteCmd( unsigned short cmd )
{
    _lcd_pin_rs = LOW;
//    _lcd_port->write( 0 );

    _D0 = 0;
    _D1 = 0;
    _D2 = 0;
    _D3 = 0;
    _D4 = 0;
    _D5 = 0;
    _D6 = 0;
    _D7 = 0;

    pulseLow( _lcd_pin_wr );
//    _lcd_port->write( cmd );

    _D0 = cmd&0x01;
    _D1 = cmd&0x02;
    _D2 = cmd&0x04;
    _D3 = cmd&0x08;
    _D4 = cmd&0x10;
    _D5 = cmd&0x20;
    _D6 = cmd&0x40;
    _D7 = cmd&0x80;

    pulseLow( _lcd_pin_wr );
}
//fix to 8bit mode
void ILI9328_LCD::WriteData( unsigned short data )
{
    _lcd_pin_rs = HIGH;
//    _lcd_port->write( data>>8 );

    _D0 = data&0x0100;
    _D1 = data&0x0200;
    _D2 = data&0x0400;
    _D3 = data&0x0800;
    _D4 = data&0x1000;
    _D5 = data&0x2000;
    _D6 = data&0x4000;
    _D7 = data&0x8000;

    pulseLow( _lcd_pin_wr );
//    _lcd_port->write( data&0xff );

    _D0 = data&0x01;
    _D1 = data&0x02;
    _D2 = data&0x04;
    _D3 = data&0x08;
    _D4 = data&0x10;
    _D5 = data&0x20;
    _D6 = data&0x40;
    _D7 = data&0x80;

    pulseLow( _lcd_pin_wr );
}

void ILI9328_LCD::SetXY( unsigned short x1, unsigned short y1, unsigned short x2, unsigned short y2 )
{
    switch ( _orientation )
    {
        case LANDSCAPE:
        case LANDSCAPE_REV:
            WriteCmdData( 0x20, y1 );
            WriteCmdData( 0x21, x1 );
            WriteCmdData( 0x50, y1 );
            WriteCmdData( 0x52, x1 );
            WriteCmdData( 0x51, y2 );
            WriteCmdData( 0x53, x2 );
            break;
            
        case PORTRAIT_REV:
        case PORTRAIT:
        default:
            WriteCmdData( 0x20, x1 );
            WriteCmdData( 0x21, y1 );
            WriteCmdData( 0x50, x1 );
            WriteCmdData( 0x52, y1 );
            WriteCmdData( 0x51, x2 );
            WriteCmdData( 0x53, y2 );
            break;
    }
    WriteCmd( 0x22 );
}

void ILI9328_LCD::SetPixelColor( unsigned int color, colordepth_t mode )
{
    unsigned char r, g, b;
    unsigned short clr;
    r = g = b = 0;
    if ( _colorDepth == RGB16 )
    {
        switch ( mode )
        {
            case RGB16:
                WriteData( color & 0xFFFF );
                break;
            case RGB18:
                r = ( color >> 10 ) & 0xF8;
                g = ( color >> 4 ) & 0xFC;
                b = ( color >> 1 ) & 0x1F;
                clr = ( ( r | ( g >> 5 ) ) << 8 ) | ( ( g << 3 ) | b );
                WriteData( clr );
                break;
            case RGB24:
                r = ( color >> 16 ) & 0xF8;
                g = ( color >> 8 ) & 0xFC;
                b = color & 0xF8;
                clr = ( ( r | ( g >> 5 ) ) << 8 ) | ( ( g << 3 ) | ( b >> 3 ) );
                WriteData( clr );
                break;
        }
    }
    else if ( _colorDepth == RGB18 )
    {
        switch ( mode )
        {
            case RGB16:
                r = ( ( color >> 8 ) & 0xF8 ) | ( ( color & 0x8000 ) >> 13 );
                g = ( color >> 3 ) & 0xFC;
                b = ( ( color << 3 ) & 0xFC ) | ( ( color >> 3 ) & 0x01 );
                break;
            case RGB18:
                b = ( color << 2 ) & 0xFC;
                g = ( color >> 4 ) & 0xFC;
                r = ( color >> 10 ) & 0xFC;
                break;
            case RGB24:
                r = ( color >> 16 ) & 0xFC;
                g = ( color >> 8 ) & 0xFC;
                b = color & 0xFC;
                break;
        }
        clr = ( r << 8 ) | ( g << 2 ) | ( b >> 4 );
        WriteData( clr );
        WriteData( b << 4 );
    }
}